Customizable OpenGUS immunoassay: A homogeneous detection system using ß-glucuronidase switch and label-free antibody.

We developed a customizable OpenGUS immunoassay that enables rapid and sensitive detection of analytes without requiring antibody modification. This immunoassay employs label-free whole antibodies, an antibody-binding Z domain (ZD) derived from Staphylococcal protein A, and a ß-glucuronidase (GUS) switch mutant, allowing for easy replacement of antibodies to tailor the immunoassays for various targeted antigens. The working principle is that the OpenGUS probe, the fusion protein of ZD and a GUS switch, converts the antibody-antigen interaction into GUS activation in a one-pot reaction. To enhance the signal-to-background ratio of the immunoassay, a GUS switch mutant that exhibits reduced background activation was developed by screening several additional mutations at the diagonal interface residue H514. Moreover, we optimized the composition of the reaction buffer, including organic solvents, salt, and surfactant. Under optimal conditions, we customized OpenGUS immunoassays for Cry j 1, human C-reactive protein, and human lactoferrin, achieving around 10-20-fold maximum fluorescence (15 min) or colorimetric (2 h) responses with picomolar to low nanomolar level detection limit, simply by using commercially available IgGs. Additionally, the three analytes were successfully detected in complex matrices similar to those used in practical applications. We believe that this customizable OpenGUS immunoassay will pave the way for the prompt development of rapid and sensitive homogeneous immunoassays for point-of-care diagnostics, high-throughput testing, and onsite environmental assessments.

Efficient and rapid linker optimization with heterodimeric coiled coils improves the response of fluorescent biosensors comprising antibodies and protein M.

We developed a coiled Q-probe (CQ-probe), a fluorescent probe containing a coiled-coil peptide pair E4/K4, to convert antibodies into biosensors for homogeneous immunoassays. This probe consists of an antibody-binding protein, protein M (PM) with the E4 peptide and the K4 peptide with a fluorescent dye. Compared to PM Q-probes, which are generated by modifying the C-terminus of PM with a fluorescent dye, CQ-probe variants with various linkers are easy to prepare and therefore enable the establishment of biosensors with a significant fluorescence response by localizing the fluorescent dye at the optimal position for quenching and antigen-dependent release. The fluorescence changes of biosensors converted from anti-BGP, anti-cortisol, and anti-testosterone antibodies using the rhodamine 6G (or TAMRA)-labeled CQ-probe upon antigen addition were 13 (or 2.6), 9.7 (or 1.5), and 2.1 (or 1.2) times larger than that of the biosensors converted using the PM Q-probe. Furthermore, the CQ-probe converted anti-digoxin IgG into a functional biosensor, whereas the PM Q-probe/antibody complex showed an insufficient response. This technology exhibits a promising capacity to convert antibodies into high-response biosensors, which are expected to be applied in a wide range of fields, including clinical diagnosis, environmental surveys, food analysis, and biological research.

Efficient Microfluidic Screening Method Using a Fluorescent Immunosensor for Recombinant Protein Secretions.

Microbial secretory protein expression is widely used for biopharmaceutical protein production. However, establishing genetically modified industrial strains that secrete large amounts of a protein of interest is time-consuming. In this study, a simple and versatile high-throughput screening method for protein-secreting bacterial strains is developed. Different genotype variants induced by mutagens are encapsulated in microemulsions and cultured to secrete proteins inside the emulsions. The secreted protein of interest is detected as a fluorescence signal by the fluorescent immunosensor quenchbody (Q-body), and a cell sorter is used to select emulsions containing improved protein-secreting strains based on the fluorescence intensity. The concept of the screening method is demonstrated by culturing Corynebacterium glutamicum in emulsions and detecting the secreted proteins. Finally, productive strains of fibroblast growth factor 9 (FGF9) are screened, and the FGF9 secretion increased threefold compared to that of parent strain. This screening method can be applied to a wide range of proteins by fusing a small detection tag. This is a highly simple process that requires only the addition of a Q-body to the medium and does not require the addition of any substrates or chemical treatments. Furthermore, this method shortens the development period of industrial strains for biopharmaceutical protein production.

The Patrol Yeast: A new biosensor armed with antibody-receptor chimera detecting a range of toxic substances associated with food poisoning.

Baker's yeast is an attractive host with established safety and stability characteristics. Many yeast-based biosensors have been developed, but transmembrane signal transduction has not been used to detect membrane-impermeable substances using antigen-antibody interactions. Therefore, we created Patrol Yeast, a novel yeast-based immunosensor of various targets, particularly toxic substances in food. A membrane-based yeast two-hybrid system using split-ubiquitin was successfully used to detect practically important concentration ranges of caffeine and aflatoxins using separated variable regions of an antibody. Moreover, enterohemorrhagic Escherichia coli O157 was detected using a specific single-chain antibody, in which Zymolyase was added to partially destroy the cell wall. The incorporation of secreted Cypridina luciferase reporter further simplified the signal detection procedures without cell lysis. The methodology is more cost-effective and faster than using mammalian cells. The ability to detect various targets renders Patrol Yeast a valuable tool for ensuring food and beverage safety and addressing other environmental and technological issues.

Evaluation and selection of potent fluorescent immunosensors by combining fluorescent peptide and nanobodies displayed on yeast surface.

Quenchbody (Q-body) is a quench-based fluorescent immunosensor labeled with fluorescent dye(s) near the antigen-binding site of an antibody. Q-bodies can detect a range of target molecules rapidly and directly. However, because Q-bodies show different antigen responses depending on the antibody used, time-consuming optimization of the Q-body structure is often necessary, and a high-throughput screening method for discriminating and selecting good Q-bodies is required. Here, we aimed to develop a molecular display method of nanobody-based "mini Q-bodies" by combining yeast surface display and coiled-coil forming E4/K4 peptide-based fluorescence labeling. As a result, the yeast-displayed mini Q-body recognizing the anti-cancer agent methotrexate (MTX) showed significant quenching and MTX-dependent dequenching on cells. To demonstrate the applicability of the developed method to select highly responsive mini Q-bodies, a small nanobody library consisting of 30 variants that recognize human serum albumin was used as a model. The best variant, showing a 2.4-fold signal increase, was obtained through selection by flow cytometry. Furthermore, the same nanobody prepared from Escherichia coli also worked as a mini Q-body after dye labeling. The described approach will be applied to quickly obtain well-behaved Q-bodies and other fluorescent biosensors for various targets through directed evolutionary approaches.

Construction of Fluorescent Immunosensor Quenchbody to Detect His-Tagged Recombinant Proteins Produced in Bioprocess.

With the widespread application of recombinant DNA technology, many useful substances are produced by bioprocesses. For the monitoring of the recombinant protein production process, most of the existing technologies are those for the culture environment (pH, O2, etc.). However, the production status of the target protein can only be known after the subsequent separation and purification process. To speed up the monitoring of the production process and screening of the higher-yield target protein variants, here we developed an antibody-based His-tag sensor Quenchbody (Q-body), which can quickly detect the C-terminally His-tagged recombinant protein produced in the culture medium. Compared with single-chain Fv-based Q-body having one dye, the Fab-based Q-body having two dyes showed a higher response. In addition, not only was fluorescence response improved but also detection sensitivity by the mutations of tyrosine to tryptophan in the heavy chain CDR region. Moreover, the effect of the mutations on antigen-binding was successfully validated by molecular docking simulation by CDOCKER. Finally, the constructed Q-body was successfully applied to monitor the amount of anti-SARS CoV-2 nanobody secreted into the Brevibacillus culture media.

Rapid construction of fluorescence quenching-based immunosensor Q-bodies using α-helical coiled-coil peptides.

Here, we report a rapid and efficient method to fabricate Quenchbodies (Q-bodies) that can detect targets with antigen-dependent fluorescence augmentation using a stable coiled-coil peptide pair, E4 and K4 (coiled Q-body, CQ-body). The CQ-body allowed antigen detection not only in buffer but also in 50% plasma. Furthermore, we describe FRET-type CQ-bodies using a dual-coloured K4 peptide, which allowed a more precise antigen quantification. Lastly, successful fabrication of nanobody-based CQ-body shows its applicability to a range of antibody fragments.

BRET Q-Body: A Ratiometric Quench-based Bioluminescent Immunosensor Made of Luciferase-Dye-Antibody Fusion with Enhanced Response.

A quenchbody (Q-body) is an immunosensor comprising an antibody fragment containing an antigen-binding site that is site-specifically labeled with a fluorescent dye. The fluorescent dye of a Q-body is quenched in the absence of an antigen; however, its fluorescence recovers in the presence of an antigen, offering simple and rapid systems for antigen detection. In this study, we fused luciferase NanoLuc to a Q-body to construct a new immunosensor termed the "BRET Q-body" that can detect antigens based on the bioluminescence resonance energy transfer (BRET) principle. The resulting BRET Q-bodies for an osteocalcin peptide that emit three different emission colors could detect an antigen without the requirement of an external light source, based on ratiometric detection and color change with two wavelengths for the luciferase and fluorophore. Furthermore, the BRET Q-body produced unexpectedly higher responses up to 12-fold because of the increased BRET efficiency, probably associated with antigen-dependent dye movement. Thus, the BRET Q-body is a useful biosensor as a core of point-of-care tests.

PM Q-probe: A fluorescent binding protein that converts many antibodies to a fluorescent biosensor.

Quenchbody (Q-body) is a fluorescent biosensor in which a fluorescent dye is tagged near the antigen binding site of an antibody. The fluorescence of the dye is quenched by the tryptophan residues present in the variable region of the antibody, and is recovered when the antigen binds. Q-bodies have been prepared using recombinant DNA technology by introducing one or more tag sequence(s) at either the N-terminal of the Fab or the single chain variable region fragment of the antibody, and labeling the tag with a fluorescent dye. However, preparation of recombinant antibody fragments is time-consuming and the performance of the Q-body is unpredictable. Here we report an antibody-binding quenching probe made from protein M from Mycoplasma genitalium that can transform the IgG antibody into an immunosensor. By using bacterially expressed and purified protein M and labeling the C-terminal cysteine-containing tag, we prepared a TAMRA-labeled PM Q-probe. When the Q-probe was incubated with Fab or IgG recognizing the bone Gla protein, the fluorescence of the probe was quenched and subsequently recovered by the adding of antigens in a dose-dependent manner. We also succeeded in detecting several small biomarkers with nanomolar sensitivity, including thyroxine extracted from human serum. The clone found to be suitable for the detection of cortisol was confirmed to work as a recombinant Q-body as well, which also worked in 50% human serum. The results suggest that the Q-probe can quickly convert an IgG to a biosensor, which will be useful in rapid diagnosis of small biomarkers.