Superior Visible Photoelectric Response with Au/Cu2NiSnS4 Core-Shell Nanocrystals.

The incorporation of plasmonic metal nanostructures into semiconducting chalcogenides in the form of core-shell structures provides a promising approach to enhancing the performance of photodetectors. In this study, we combined Au nanoparticles with newly developed copper-based chalcogenides Cu2NiSnS4 (Au/CNTS) to achieve an ultrahigh optoelectronic response in the visible regime. The high-quality Au/CNTS core-shell nanocrystals (NCs) were synthesized by developing a unique colloidal hot-injection method, which allowed for excellent control over sizes, shapes, and elemental compositions. The as-synthesized Au/CNTS hybrid core-shell NCs exhibited enhanced optical absorption, carrier extraction efficiency, and improved photosensing performance owing to the plasmonic-induced resonance energy transfer effect of the Au core. This effect led to a significant increase in the carrier density of the Au/CNTS NCs, resulting in a measured responsivity of 1.2 × 103 AW-1, a specific detectivity of 6.2 × 1011 Jones, and an external quantum efficiency of 3.8 × 105 % at an incident power density of 318.5 µW cm-2. These results enlighten a new era in the development of plasmonic core-shell nanostructure-based visible photodetectors.

Terahertz Combined with Metamaterial Microfluidic Chip for Troponin Antigen Detection.

In this paper, we use terahertz combined with metamaterial technology as a powerful tool to identify analytes at different concentrations. Combined with the microfluidic chip, the experimental measurement can be performed with a small amount of analyte. In detecting the troponin antigen, surface modification is carried out by biochemical binding. Through the observation of fluorescent antibodies, the average number of fluorescent dots per unit of cruciform metamaterial is 25.60, and then, by adjusting the binding temperature and soaking time, the average number of fluorescent dots per unit of cruciform metamaterial can be increased to 181.02. Through the observation of fluorescent antibodies, it is confirmed that the antibodies can be successfully stabilized on the metamaterial and then bound to the target antigen. The minimum detectable concentration is between 0.05~0.1 µg/100 µL, and the concentration and ΔY show a positive correlation of R2 = 0.9909.

Hotspots in action: near-infrared light mediated photoelectrochemical oxygen evolution on high index faceted plasmonic gold nanoarchitectures.

Photo-induced electrochemical water splitting is a fascinating approach to overcome the present energy demands as well as environmental issues. To this end, near-infrared (NIR) photocatalysts stand out as promising candidates (where 53% of the solar light is NIR light) to solve the present energy crisis but the lack of NIR-activated photocatalysts has remained a great challenge for decades. Herein, for the first time, we report the synthesis of high-index faceted plasmonic Au nano-branched 12 tip nanostars, which can absorb the whole spectral region of electromagnetic radiation (UV-vis-NIR), for efficient water splitting. Moreover, the plasmonic hot spots on the Au 12 tip nanostars significantly promote the photoelectrochemical oxygen evolution reaction (OER) under NIR light (915 nm) with long-term stability. Remarkably, the Au 12 tip nanostars exhibit 250-fold enhancement of activity under 915 nm laser irradiation and 6.5-fold enhancement of activity under 532 nm laser irradiation, as compared to the Au NPs. Furthermore, the Finite-Difference Time-Domain (FDTD) study confirmed that the significant photoelectrochemical (PEC) enhancement in the NIR light region could be attributed to the hot-electron injection/plasmonic hot spot mechanism upon localized surface plasmonic resonance (LSPR) excitation. Overall, we anticipate that the present work would help to develop new NIR photoelectrocatalysts for meeting future energy demands.

Self-Assembly Anchored Cationic Copolymer Interfaces for Applying the Control of Counterion-Induced Bacteria Killing/Release Procedure.

In recent years, daily hygiene and disease control issues have received increasing attention, especially the raging epidemics caused by the spread of deadly viruses. The construction of the interface of new polymer materials is focused on, which can provide a cyclic operation process for the killing and releasing of bacteria, and perform repeated regeneration, which is of great significance for the development of advanced medical biomaterials. In order to explore the basic physical phenomena of bacterial attachment and detachment on the polymer material interface by different amine groups, this study plans to synthesize four different butyl methacrylate (BMA)-based cationic copolymers with primary, ternary, and quaternary amine groups, and compare their effects on bactericidal efficiency. Since BMA can generate strong hydrophobic interactions with the benzene ring structure, this study used a polystyrene substrate to realize a self-assembled cationic copolymer interface for controlling the counterion-induced bacterial killing/release process. Furthermore, negatively charged ions are introduced to induce changes in the hydration capability of water molecules and control the subsequent bacterial detachment function. In this study, possible directions to answer and clarify the above concepts are proposed, and there is a basic reference principle that can lead to research work in macromolecular bioscience fields.

Sensitivity Enhancement and Probiotic Detection of Microfluidic Chips Based on Terahertz Radiation Combined with Metamaterial Technology.

Terahertz (THz) radiation has attracted wide attention in recent years due to its non-destructive properties and ability to sense molecular structures. In applications combining terahertz radiation with metamaterial technology, the interaction between the terahertz radiation and the metamaterials causes resonance reactions; different analytes have different resonance performances in the frequency domain. In addition, a microfluidic system is able to provide low volume reagents for detection, reduce noise from the environment, and concentrate the sample on the detection area. Through simulation, a cruciform metamaterial pattern was designed; the proportion, periodicity, and width of the metamaterial were adjusted to improve the sensing capability of the chip. In the experiments, the sensing capabilities of Type A, B, and C chips were compared. The Type C chip had the most significant resonant effect; its maximum shift could be increased to 89 GHz. In the probiotic experiment, the cruciform chip could have a 0.72 GHz shift at a concentration of 0.025 mg/50 µL, confirming that terahertz radiation combined with a metamaterial microfluidic chip can perform low-concentration detection.

Nanoscale plasmonic wires with maximal figure of merits as a superior flexible transparent conducting electrode for RGB colors.

Based on incredibly increasing applications in modern optoelectronic devices, the demand for securing a superior conductive transparent electrode (TCE) candidate becomes significant and urgent. However, boosting both transmittance and conductance simultaneously is an intrinsic limitation. In this work, we present silver nanoscale plasmonic wires (Ag NPWs) to function as TCEs in the visible light region by lowering their corresponding plasma frequencies. By carefully designing geometric dimensions of the Ag NPWs, we also optimize the performance for red, green, and blue colors, respectively. The demonstrated figure of merits for RGB colors appeared respectively 443.29, 459.46, and 133.78 in simulation and 302.75, 344.11, and 348.02 in experiments. Evidently, our Ag NPWs offer much greater FoMs beyond conventional TCEs that are most frequently comprised of indium tin oxide and show further advantages of flexibility and less Moire effect for the applications of flexible and high-resolution optoelectronic devices.

Demonstration of a Superior Deep-UV Surface-Enhanced Resonance Raman Scattering (SERRS) Substrate and Single-Base Mutation Detection in Oligonucleotides.

In life science, rapid mutation detection in oligonucleotides is in a great demand for genomic and medical screening. To satisfy this demand, surface-enhanced resonance Raman spectroscopy (SERRS) in the deep-UV (DUV) regime offers a promising solution due to its merits of label-free nature, strong electromagnetic confinement, and charge transfer effect. Here, we demonstrate an epitaxial aluminum (Al) DUV-SERRS substrate that resonates effectively with the incident Raman laser and the ss-DNA at 266 nm, yielding significant SERRS signals of the detected analytes. For the first time, to the best of our knowledge, we obtaine SERRS spectra for all bases of oligonucleotides, not only revealing maximum characteristic Raman peaks but also recording the highest enhancement factor of up to 106 for a 1 nm thick adenine monomer. Moreover, our epitaxial Al DUV-SERRS substrate is able to enhance the Raman signal of all four bases of 12-mer ss-DNA and to further linearly quantify the single-base mutation in the 12-mer ss-DNA.

Convergent charge interval spacing of zwitterionic 4-vinylpyridine carboxybetaine structures for superior blood-inert regulation in amphiphilic phases.

Antifouling materials are indispensable in the biomedical field, but their high hydrophilicity and surface free energy provoke contamination on surfaces under atmospheric conditions, thus limiting their applicability in medical devices. This study proposes a new zwitterionic structure, 4-vinylpyridine carboxybetaine (4VPCB), that results in lower surface free energy and increases biological inertness. In the design of 4VPCB, one to three carbon atoms are inserted between the positive charge and negative charge (carbon space length, CSL) of the pyridyl-containing side chain to adjust hydration with water molecules. The pyridine in the 4VPCB structure provides the hydrophobicity of the zwitterionic functional group, and thus it can have a lower free energy in the gas phase but maintain higher hydrophilicity in the liquid phase environment. Surface plasmon resonance and confocal microscopy were used to analyze the antiprotein adsorption and anti-blood cell adhesion properties of the P4VPCB brush surface. The results showed that the CSL in the P4VPCB structure affected the biological inertness of the surface. The protein adsorption on the surface of P4VPCB2 (CSL= 2) is lower than that on the surfaces of P4VPCB1 (CSL = 1) and P4VPCB3 (CSL = 3), and the optimal resistance to protein adsorption can be reduced to 7.5 ng cm-2. The surface of P4VPCB2 can also exhibit excellent blood-inert function in the adhesion test with various human blood cells, offering a potential possibility for the future design of a new generation of blood-inert medical materials.

Achieving broad absorption band and high incident angles by stochastically-distributed oblique-flat-sheet metamaterial perfect absorbers.

In this work, we integrated a periodic seed layer and oblique deposition method to fabricate a stochastically-distributed oblique-flat-sheet metamaterial perfect absorber (MPA). Such design could increase its absorption bandwidth and tolerance to high angle-incidence due to the fact that various oblique flat sheets offer different resonance conditions while even a single oblique flat sheet could provide different optical paths for resonance. On the other hand, a seed layer could reduce uncertainty regarding to direct oblique deposition and provide abilities to manipulate the bandwidth of the MPA. We also setup a simulation model in the aids of Visual Basic Application and examined the absorption behavior of the MPA under TM and TE oblique incidence that could achieve high absorbance under 80° and 60° incidence, respectively. Finally, in measurement, the fabricated sample owns 65% absorbance within 80-250 THz and over 90% absorbance within 250-320 THz at x-polarization normal incidence; as for the y-polarization normal incidence, we could achieve overall 70% absorbance within 80-300 THz. The measured results reveal similar tendency compared to the simulated ones.

Ultra-broadband, lithography-free, omnidirectional, and polarization-insensitive perfect absorber.

Perfect absorbers (PAs) at near infrared allow various applications such as biosensors, nonlinear optics, color filters, thermal emitters and so on. These PAs, enabled by plasmonic resonance, are typically powerful and compact, but confront inherent challenges of narrow bandwidth, polarization dependence, and limited incident angles as well as requires using expensive lithographic process, which limit their practical applications and mass production. In this work, we demonstrate a non-resonant PA that is comprised of six continuous layers of magnesium fluoride (MgF2) and chromium (Cr) in turns. Our device absorbs more than 90% of light in a broad range of 900-1900 nm. In addition, such a planar design is lithography-free, certainly independent with polarization, and presents a further advantage of wide incidence up to 70°. The measured performance of our optimized PA agrees well with analytical calculations of transfer matrix method (TMM) and numerical simulations of finite element method, and can be readily implemented for practical applications.

Gate-Tunable Plasmon-Enhanced Photodetection in a Monolayer MoS2 Phototransistor with Ultrahigh Photoresponsivity.

Monolayer transition metal dichalcogenides (TMDs), direct bandgap materials with an atomically thin nature, are promising materials for electronics and photonics, especially at highly scaled lateral dimensions. However, the characteristically low total absorption of photons in the monolayer TMD has become a challenge in the access to and realization of monolayer TMD-based high-performance optoelectronic functionalities and devices. Here, we demonstrate gate-tunable plasmonic phototransistors (photoFETs) that consist of monolayer molybdenum disulfide (MoS2) photoFETs integrated with the two-dimensional plasmonic crystals. The plasmonic photoFET has an ultrahigh photoresponsivity of 2.7 × 104 AW-1, achieving a 7.2-fold enhancement in the photocurrent compared to pristine photoFETs. This benefits predominately from the combination of the enhancement of the photon-absorption-rate via the strongly localized-electromagnetic-field and the gate-tunable plasmon-induced photocarrier-generation-rate in the monolayer MoS2. These results demonstrate a systematic methodology for designing ultrathin plasmon-enhanced photodetectors based on monolayer TMDs for next-generation ultracompact optoelectronic devices in the trans-Moore era.

An Ultrasensitive Gateless Photodetector Based on the 2D Bilayer MoS2-1D Si Nanowire-0D Ag Nanoparticle Hybrid Structure.

Atomically thin transition metal dichalcogenides (TMDC) have received much attention due to their wide variety of optical and electronic properties. Among various TMDC materials, molybdenum disulfide (MoS2) has been intensely studied owing to its potential applications in nanoelectronics and optoelectronics. However, two-dimensional MoS2 photodetectors suffer from low responsivity due to low optical cross section. Combining MoS2 with plasmonic nanostructures can drastically increase scattering cross section and enhance local light-matter interaction. Moreover, suspended MoS2 has been shown to exhibit higher photoluminescence intensity and strong photogating effect, which can be employed in photodetectors. Herein, we propose an approach to utilize plasmonic nanostructures and physical suspension for 2D MoS2 photosensing enhancement by hybridizing 2D bilayer MoS2, 1D silicon nanowires, and 0D silver nanoparticles. The hybrid structure shows a gateless responsivity of 402.4 A/W at a wavelength of 532 nm, which represents the highest value among the ever reported gateless plasmonic MoS2 photodetector. The great responsivity and large active area results in an exceptional detectivity of 2.34 × 1012 Jones. This study provides a new approach for designing high-performance 2D TMDC-based optoelectronic devices.

Aluminum Plasmonics Enriched Ultraviolet GaN Photodetector with Ultrahigh Responsivity, Detectivity, and Broad Bandwidth.

Plasmonics have been well investigated on photodetectors, particularly in IR and visible regimes. However, for a wide range of ultraviolet (UV) applications, plasmonics remain unavailable mainly because of the constrained optical properties of applicable plasmonic materials in the UV regime. Therefore, an epitaxial single-crystalline aluminum (Al) film, an abundant metal with high plasma frequency and low intrinsic loss is fabricated, on a wide bandgap semiconductive gallium nitride (GaN) to form a UV photodetector. By deliberately designing a periodic nanohole array in this Al film, localized surface plasmon resonance and extraordinary transmission are enabled; hence, the maximum responsivity (670 A W-1) and highest detectivity (1.48 × 1015 cm Hz1/2 W-1) is obtained at the resonance wavelength of 355 nm. In addition, owing to coupling among nanoholes, the bandwidth expands substantially, encompassing the entire UV range. Finally, a Schottky contact is formed between the single-crystalline Al nanohole array and the GaN substrate, resulting in a fast temporal response with a rise time of 51 ms and a fall time of 197 ms. To the best knowledge, the presented detectivity is the highest compared with those of other reported GaN photodetectors.

Perovskite Quantum Dot Lasing in a Gap-Plasmon Nanocavity with Ultralow Threshold.

Lead halide perovskite materials have recently received considerable attention for achieving an economic and tunable laser owing to their solution-processable feature and promising optical properties. However, most reported perovskite-based lasers operate with a large lasing-mode volume, resulting in a high lasing threshold due to the inefficient coupling between the optical gain medium and cavity. Here, we demonstrate a continuous-wave nanolasing from a single lead halide perovskite (CsPbBr3) quantum dot (PQD) in a plasmonic gap-mode nanocavity with an ultralow threshold of 1.9 Wcm-2 under 120 K. The calculated ultrasmall mode volume (∼0.002 λ3) with a z-polarized dipole and the significantly large Purcell enhancement at the corner of the nanocavity inside the gap dramatically enhance the light-matter interaction in the nanocavity, thus facilitating lasing. The demonstration of PQD nanolasing with an ultralow-threshold provides an approach for realizing on-chip electrically driven lasing and integration into on-chip plasmonic circuitry for ultrafast optical communication and quantum information processing.

Epitaxial Aluminum Surface-Enhanced Raman Spectroscopy Substrates for Large-Scale 2D Material Characterization.

Surface-enhanced Raman spectroscopy (SERS) is an ultrasensitive technique to identify vibrational fingerprints of trace analytes. However, present SERS techniques suffer from the lack of uniform, reproducible, and stable substrates to control the plasmonic hotspots in a wide spectral range. Here, we report the promising application of epitaxial aluminum films as a scalable plasmonic platform for SERS applications. To assess the uniformity of aluminum substrates, atomically thin transition metal dichalcogenide monolayers are used as the benchmark analyte due to their inherent two-dimensional homogeneity. Besides the distinctive spectral capability of aluminum in the ultraviolet (325 nm), we demonstrate that the aluminum substrates can even perform comparably with the silver counterparts made from single-crystalline colloidal silver crystals using the same SERS substrate design in the visible range (532 nm). This is unexpected from the prediction solely based on optical dielectric functions and illustrate the superior surface and interface properties of epitaxial aluminum SERS substrates.

Achieving sub-wavelength imaging through a flat hyperlens in a modified anodic aluminum oxide template.

Constrained by the diffraction limit, a lens can only resolve features larger than half of the incident wavelength owing to the decaying nature of evanescent waves. Several novel devices have been proposed, for example, superlenses and hyperlenses to break this limit. In this work, we present a flat hyperlens composed of silver nanowires embedded in a modified anodic aluminum oxide (AAO) template to demonstrate subwavelength imaging. Measurement conducted by the near-field scanning optical microscope at 633 nm suggests that our proposed flat hyperlens can indeed achieve sub-wavelength imaging with a resolution down to 0.34λ and 0.25λ along two orthogonal directions. Furthermore, to confirm the resolution limit of the flat hyperlens, numerical simulations were performed at the incident wavelengths of 633 and 365 nm, and the corresponding resolution were 0.19λ and 0.3λ, respectively, thus paving a route for sub-wavelength photolithography.

Application of a Terahertz System Combined with an X-Shaped Metamaterial Microfluidic Cartridge.

Terahertz (THz) radiation has attracted wide attention for its ability to sense molecular structure and chemical matter because of a label-free molecular fingerprint and nondestructive properties. When it comes to molecular recognition with terahertz radiation, our attention goes first towards the absorption spectrum, which is beyond the far infrared region. To enhance the sensitivity for similar species, however, it is necessary to apply an artificially designed metamaterial sensor for detection, which confines an electromagnetic field in an extremely sub-wavelength space and hence receives an electromagnetic response through resonance. Once the resonance is caused through the interaction between the THz radiation and the metamaterial, a minute variation might be observed in the frequency domain. For a geometric structure of a metamaterial, a novel design called an X-shaped plasmonic sensor (XPS) can create a quadrupole resonance and lead to sensitivity greater than in the dipole mode. A microfluidic system is able to consume reagents in small volumes for detection, to diminish noise from the environment, and to concentrate the sample into detection spots. A microfluidic device integrated with an X-shaped plasmonic sensor might thus achieve an effective and highly sensitive detection cartridge. Our tests involved not only measurements of liquid samples, but also the performance of a dry bio-sample coated on an XPS.

Ultrasensitive and Selective Gas Sensor Based on a Channel Plasmonic Structure with an Enormous Hot Spot Region.

We present experimental and theoretical studies of a metamaterial-based plasmonic structure to build a plasmonic-molecular coupling detection system. High molecular sensitivity is realized only when molecules are located in the vicinity of the enhanced field (hot spot region); thus, introducing target molecules in the hot spot region to maximize plasmonic-molecular coupling is crucial to developing the sensing technology. We design a metamaterial consisting of a vertically oriented metal insulator metal (MIM) structure with a 25 nm channel sandwiched between two metal films, which enables the delivery of molecules into the large ravinelike hot spot region, offering an ultrasensitive platform for molecular sensing. This metamaterial is applied to carbon dioxide and butane detection. We design the structure to exhibit resonances at 4033 and 2945 cm-1, which overlap with the C═O and -CH2 vibration modes, respectively. The mutual coupling of these two resonance modes creates a Fano resonance, and their distinct peaks are clearly observed in the corresponding transmission dips. In addition, owing to its small footprint, such a vertical-oriented MIM structure enables us to increase the integration density and allows the detection of a 20 ppm concentration with negligible background noise and high selectivity in the mid-infrared region.

Disease antigens detection by silicon nanowires with the efficiency optimization of their antibodies on a chip.

Enhancing the efficiency of antibody protein immobilized on a silicon nanowire-based chip for their antigens detection is reported. An external electric field (EEF) is applied to direct the orientation of antibodies during their immobilization on a chip. Atomic force microscopy (AFM) is used to measure the binding forces between immobilized antibody and targeting antigen under the influence of EEF at different angles. The maximum binding force under a specific angle (optimal angle; oa) of EEF (maxEEFoa) implies the optimal orientation of the antibodies on the chip. In this report, two different cancer carcinoembryonic antigen (CEA)-related cell adhesion molecules 5 (CEACAM5) & 1 (CEACAM1) were used for the examples of disease antigen detection. maxEEFoa of anti-CEACAM5 or anti-CEACAM1 immobilized on a general chip was firstly determined. Spectroscopy of AFM revealed that both binding forces were the largest ones with their antigens when maxEEFoa was applied as compared with no or other angles of EEF. These antibody proteins accompanied with the application of EEF were secondly immobilized on silicon-nanowires (n = 1000) and the field effects were measured (∆I) as their target antigens were approached. Results showed that ∆I was the largest ones when maxEEFoas (225°/270° and 135°/180° for anti-CEACAM5 and anti-CEACAM1, respectively) were applied as compared with other angles of EEF. These observations imply that the silicon nanowires together with the application of maxEEFoa as detection tools could be applied for the cancer diagnostics in the future.

Porous aluminum electrodes with 3D channels and zig-zag edges for efficient hydrogen evolution.

An eco-friendly electrochemical approach, including base and acid treatments, and anodization, has been developed for preparation of defect-rich porous aluminum electrodes for efficient hydrogen evolution. A small Tafel slope value of 43 mV dec-1 reveals improved reaction kinetics through the micropores, 3D channels, and zig-zag edges of the aluminum electrode. It exhibits an onset potential of 460 mV and an overpotential of 580 mV at the current density of 10 mA cm-2 due to the porous and edge structures that enhance the charge transfer and mass transport.