RESUMEN
Understanding the formation of ice crystals is essential for tailoring the microstructure and physical properties of cryogels. This study investigated the effects and mechanisms of pectin molecular weight (Mw) on impacting ice crystal formation. Pectin fractions various Mw (10.13-212.20 kDa) were prepared by hydrothermal method. The solution of high Mw pectin fractions exhibited higher contact angle, lower water freedom, and stronger adsorption of water molecules. The splat experiment and molecular dynamic (MD) results confirmed that higher Mw pectin have stronger ice crystal growth inhibition activity than lower Mw pectin. Furthermore, the pore size distribution of the cryogel increased from 98-203 µm to 105-267 µm as the molecular weight decreased from 212.2 kDa to 121.0 kDa. Additionally, in the higher Mw pectin cryogel, stronger mechanical strength was observed. These findings suggested that changing the molecular weight of pectin has the potential to regulate the ice crystal growth, microstructure and physical properties of frozen products.
RESUMEN
Porous morphology and mechanical properties determine the applications of cryogels. To understand the influence of the ionic network on the microstructure and mechanical properties of pectin cryogels, we prepared low-methoxyl pectin (LMP) cryogels with different Ca2+ concentrations (measured as R-value, ranging from 0 to 2) through freeze-drying (FD). Results showed that the R-values appeared to be crucial parameters that impact the pore morphology and mechanical characteristics of cryogels. It is achieved by altering the network stability and water state properties of the cryogel precursor. Cryogel precursors with a saturated R-value (R = 1) produced a low pore diameter (0.12 mm) microstructure, obtaining the highest crispness (15.00 ± 1.85) and hardness (maximum positive force and area measuring 2.36 ± 0.31 N and 12.30 ± 1.57 N·s respectively). Hardness showed a negative correlation with Ca2+ concentration when R ≤ 1 (-0.89), and a similar correlation with the porosity of the gel network when R ≥ 1 (-0.80). Given the impacts of crosslinking on the pore structure, it is confirmed that the pore diameter can be designed between 56.24 and 153.58 µm by controlling R-value in the range of 0-2.
Asunto(s)
Criogeles , Pectinas , Criogeles/química , Fenómenos Mecánicos , Porosidad , DurezaRESUMEN
Pectic polysaccharides modulate gut fermentation ability, which is determined by structural characteristics. In this work, apple pectins were extracted by HCl (HAEP), NaOH (AEP), cellulase (EAEP), and in parallel cell wall pectic fractions were sequentially extracted by water (WEP), chelator (CEP) and NaOH (NEP). The aim is to comprehensively compare the impact of extraction on pectin structure and gut fermentation behavior. Results showed that high content of galacturonic acid (90.65 mol%) and large molecular weight (675 kg/mol) were detected in the HAEP. Molecular morphology of the HAEP presented high linearity, while AEP, EAEP and WEP exhibited compact filamentous structures with highly branched patterns. The AEP was characterized by high yield (33.1 g/100 g d.b.), moderate molecular weight (304 kg/mol) and large extent of rhamnogalacturonan-I region (24.88 %) with low degree of branching (1.77). After in vitro simulated gut fermentation for 24 h, total content of short-chain fatty acid (SCFA) generated with the AEP supplement increased to 36.8 mmol/L, followed by EAEP, HAEP and WEP (25.2, 24.2 and 20.3 mmol/L, respectively). Meanwhile, WEP simultaneously produced the highest ammonia content (22.4 mmol/L). This investigation suggests that the fermentation of AEP produces more beneficial SCFA and less ammonia, thus indicating a better gut fermentation property.
Asunto(s)
Amoníaco , Pectinas , Fermentación , Amoníaco/metabolismo , Hidróxido de Sodio , Pectinas/química , Polisacáridos/química , Ácidos Grasos Volátiles/metabolismo , Pared Celular/químicaRESUMEN
The ice crystal morphology formed under a series of amidated pectin gels with various crosslink strengths were investigated. The results showed that as the degree of amidation (DA) increased, pectin chains exhibited shorter homogalacturonan (HG) regions. Highly amidated pectin exhibited a faster gelation rate and a stronger gel micro-network via hydrogen bonds. Based on cryogenic scanning electron microscopy (cryo-SEM), smaller ice crystals were formed in frozen gel with low DA, suggesting that a weaker cross-linked gel micro-network was more effective at inhibiting crystallization. After sublimation, lyophilized gel scaffolds with high crosslink strength displayed less number of pores, high porosity, lower specific surface area, and greater mechanical strength. This study is expected to confirm that the microstructure and mechanical properties of freeze-dried pectin porous materials could be regulated by changing the crosslink strength of pectin chains, which is achieved by increasing the degree of amidation in the HG domains.
Asunto(s)
Hielo , Pectinas , Cristalización , Geles/química , Pectinas/químicaRESUMEN
Freeze-dried (FD) fruit and vegetable materials with a large amount of sugar are unstable. With the aim to understand the structure formation of FD products, the effects of fructose content on the texture and microstructure of FD matrix were investigated by using pectin-cellulose cryogel model. Cryogels containing fructose of 0-40% were produced using freeze-drying at three different primary drying temperatures of -40, -20, and 20°C. The resultant cryogels were characterized by texture profile analyzer, scanning electron microscope, and µCT. Results indicated that at drying temperature of -40°C, increasing fructose concentration promoted the hardness of the cryogels, and cryogels of 16% fructose obtained maximum hardness. Excessive fructose (≥20%) weakened the described hardness, while exhibiting stronger springiness and resilience. The microstructure showed that dense pores and increased wall thickness due to fructose aggregation were critical factors responsible for increased hardness. The porous structure as well as relatively large pore size were necessary for crispness, in addition, rigid pore wall with certain strength were also required. At the drying temperature of 20°C, large hetero-cavities dominated the microstructure of cryogels with 30% and 40% fructose, caused by melting inside during FD process. In this situation, lower Tm (-15.48 and -20.37°C) were responsible for cryogels' melting In conclusion, if possible, regulating fructose content and state may enable the precision texture design of FD fruit and vegetable foods.
Asunto(s)
Criogeles , Fructosa , Criogeles/química , Celulosa , Congelación , PectinasRESUMEN
The influence of cell morphology on the textural characteristic of freeze-dried apple, strawberry, and mango cubes was evaluated. Corresponding restructured cube samples without intact cell morphology were prepared as controls. Results indicated that the presence of cell morphology strengthened the shrinkage and collapse of samples during freeze-drying, especially in mangoes due to the high content of sugar. Intact cell morphology was found in natural fruit cubes after freeze-drying by scanning electron microscopy (SEM) observation, making them exhibit a more regular microporous structure, further resulting in higher hardness than the restructured cubes. However, the intact cell morphology negatively affected the crispness of freeze-dried cubes since it enhanced structural collapse. The freeze-dried samples without cell morphology would destroy the cellulose structure and form a continuous open-pore structure under the concentration effect of ice crystals during freezing, which accelerates the escape of water molecules, increases the drying rate, and avoid collapse. Sensory experiments found that restructured cubes without intact cell morphology exhibited greater comprehensive acceptance, suggesting the potential application of cell morphology disruption in the future freeze-drying industry.
Asunto(s)
Fragaria , Liofilización , Malus , Mangifera , Células Vegetales , Fragaria/química , Fragaria/ultraestructura , Liofilización/métodos , Frutas/química , Frutas/ultraestructura , Malus/química , Malus/ultraestructura , Mangifera/química , Mangifera/ultraestructura , Células Vegetales/química , Células Vegetales/ultraestructura , Microscopía Electroquímica de RastreoRESUMEN
The applications of cryogels are defined by their porous morphology as well as mechanical properties. To achieve efficient regulation of porous properties for pectin cryogels, we selected starch as a potential polysaccharide regulator. Pectin/starch composite cryogels with different degrees of gelatinization were formulated, and two ways of starch gelatinization were considered: starch gelatinization occurred before or after pectin crosslinking during forming the hydrogel network. The results showed that high gelatinized starch (73.8 %-100.0 %) rendered pectin cryogels with denser pore morphology and higher mechanical strength. The pore diameter transferred from 160-200 µm to 40-60 µm with the degree of gelatinization, while the total porosity decreased by about 15 % and the specific surface area increased by about 100 m2/g. When starch gelatinization occurred before pectin crosslinking, the hydrogen bond interactions between gelatinized starch and pectin were formed to accelerate the gelation rate of the pectin Ca2+-dependent network. When gelatinization occurred after pectin crosslinking, the pre-formed pectin network delayed the breakdown of the starch crystalline structure during gelatinization. The qualitative regulation of the pore morphology in pectin cryogels by incorporating starches with varying degrees of gelatinization was confirmed.
Asunto(s)
Criogeles , Almidón , Criogeles/química , Almidón/química , Pectinas/química , PorosidadRESUMEN
To fully understand the role of xyloglucan (XyG) on the microstructural and mechanical properties of pectin cryogels, we formulated two types of low methoxyl pectin cryogels containing different XyG content (with or without an ionic network) using freeze-drying. The interaction between the pectin and XyG was explored, and the morphologies of ice crystals were characterized by the pore morphometric of freeze-dried scaffolds. Results showed that XyG and pectin could be cross-linked via hydrogen bonding interactions. When the ionic network was present, XyG accelerated pectin gelation but decreased the size of ice crystals during freezing, reducing the pore diameters of cryogels from 340 to 350 µm to 210-230 µm while shifting the structural thickness from 50 to 70 µm to 30-50 µm. When the ionic network was absent, the addition of XyG increased the pore size of the pectin cryogel from 30 to 50 µm to 70-90 µm, while rising the pore wall thickness from 50 to 70 µm to 70-90 µm. The ionic cross-links between the pectin chains gave freeze-dried scaffolds mechanical strength and crispiness, and the incorporation of XyG further strengthened the mechanical resistance of cryogels.
Asunto(s)
Criogeles , Pectinas , Criogeles/química , Glucanos , XilanosRESUMEN
In order to select the critical factors on the texture and hygroscopic characteristics of freeze-dried fruit and vegetable cubes, the correlation analysis was performed on the major chemical compositions of 12 fresh materials, and the microstructure, texture, hygroscopicity of corresponding freeze-dried samples. The dry proportion of starch-rich materials, such as taro, was mainly composed of polysaccharides (0.76-0.89 g/g db), while the dry proportion of starch-poor materials such as apple was mainly composed of mono-/disaccharides (0.70-0.95/g db). Data from the microscopy showed that cell wall polysaccharides constituted the scaffold of freeze-dried cubes and natural starch granules attached to the scaffold as fillers. Both of them inhibited structural collapse. Mono-/disaccharides were accountable for the hardness and crispiness of freeze-dried cubes, however, excessive mono-/disaccharides could reduce the size of the pores and cause severe shrinkage. Polysaccharides reduced the hygroscopicity of freeze-dried cubes, on the contrary, mono-/disaccharides promoted hygroscopicity, especially fructose.
Asunto(s)
Disacáridos , Frutas , Pared Celular , Disacáridos/análisis , Liofilización , Frutas/química , Polisacáridos/análisis , Almidón/análisis , Verduras , HumectabilidadRESUMEN
The intestinal fermentability of pectic polysaccharides is largely determined by its molecular size. In this study, fermentation properties of enzymatic-modified apple pectin (AP) and homogalacturonans (HG) with high, medium and low molecular weight (Mw) were evaluated by in vitro fermentation model, and their structural changes were also investigated. Results showed that Mw, monosaccharide contents and molecular linearity of the AP hydrolysates were reduced after microbial degradation. On the other hand, culture media supplemented with low-Mw AP (60,300 g/mol) and low-Mw HG (861 g/mol) exhibited lower pH (5.1 and 5.7, respectively) and produced higher total short-chain fatty acid contents (SCFA, 230.40 mmol/L and 187.19 mmol/L, respectively). However, reduced trends in abundance of the pectinolytic microorganisms Faecalibacterium and Eubacterium were showed as Mw of the HG decreased, whereas growth of the SCFA-producer genera Bifidobaacterium, Megasphaera and Allisonella were improved. This work confirmed that low-Mw pectin and homogalacturonan generated more beneficial metabolites, developing structure-microbiota-gut health relationship.
Asunto(s)
Ácidos Grasos Volátiles/metabolismo , Microbioma Gastrointestinal/efectos de los fármacos , Pectinas/farmacología , Adulto , Bacterias/clasificación , Bacterias/metabolismo , Heces/microbiología , Femenino , Fermentación/fisiología , Humanos , Masculino , Malus/química , Peso Molecular , Pectinas/químicaRESUMEN
As the most widely consumed fruit in the world, apple (Malus domestica Borkh.) fruits provide a high level of phenolics and have many beneficial effects on human health. The composition and content of phenolic compounds in natural apples differs according to the tissue types and cultivar varieties. The bioavailability of apple-derived phenolics, depending on the absorption and metabolism of phenolics during digestion, is the key determinant of their positive biological effects. Meanwhile, various processing technologies affect the composition and content of phenolic compounds in apple products, further affecting the bioavailability of apple phenolics. This review summarizes current understanding on the compositions, distribution, absorption, and metabolism of phenolic compounds in apple and their stability when subjected to common technologies during processing. We intend to provide an updated overview on apple phenolics and also suggest some perspectives for future research of apple phenolics.
Asunto(s)
Malus/metabolismo , Fenoles/química , Extractos Vegetales/química , Manipulación de Alimentos , Frutas/química , Frutas/metabolismo , Humanos , Malus/química , Fenoles/metabolismo , Extractos Vegetales/metabolismoRESUMEN
Pectin, a major polysaccharide found in the cell walls of higher plants, plays major roles in determining the physical and nutritional properties of fruit- and vegetable-based products. An in-depth understanding of the effects of processing operations on pectin structure and functionality is critical for designing better products. This review, therefore, focuses on the progress made in understanding the effects of processing on pectin structure, further on pectin functionality, consequently on product properties. The effects of processing on pectin structure are highly dependent on the processing conditions. Targeted control of pectin structure by applying various processing operations could enhance textural, rheological, nutritional properties and cloud stability of products. While it seems that optimizing product quality in terms of physical properties is counteracted by optimizing the nutritional properties. Therefore, understanding plant component biosynthesis mechanisms and processing mechanisms could be a major challenge to balance among the quality indicators of processed products.
Asunto(s)
Pared Celular/metabolismo , Manipulación de Alimentos/métodos , Frutas/metabolismo , Pectinas/química , Pectinas/metabolismo , Temperatura , Verduras/metabolismo , ReologíaRESUMEN
BACKGROUND: Carrot carotenoids are typically located in chromoplasts, forming a crystalline substructure. Cell walls and chromoplasts therefore constitute two major physical barriers to the release of carotenoids from the food matrix during digestion. The release of carotenoids from these physical barriers is supposed to be substantially affected by mechanical factors during food processing and oral mastication. Given the implications of this, the effects of four different processing procedures, and various mastication levels, on the carotenoid bioaccessibility of carrot chips were evaluated. RESULTS: Restructuring and drying methods substantially affected the carotenoid bioaccessibility of carrot chips. The highest carotenoid bioaccessibility was obtained for the air-dried combined with instant pressure-drop-dried (AD-DIC) restructured chips. Although the fresh carrots possessed the highest carotenoid content, their bioaccessibility was lower than that of the carrot chips. The evolution of the particle sizes of the samples was responsible for the changes in carotenoid bioaccessibility due to oral masitication. The particle size of the fresh carrots decreased with increasing oral masitication, which favored carotenoid bioaccessibilty. However, the restructured chips that combined freeze drying with instant pressure-drop drying (R-FD-DIC) demonstrated the opposite trend, probably caused by the severe aggregation of the sample during digestion, which compromised the effect of mastication on the release of carotenoid. CONCLUSION: Data regarding the effects of the drying process and oral mastication digestion behavior on the samples suggested that AD-DIC-dried restructured carrot chips are effective in enhancing carotenoid bioaccessibility, which explains the key factors involved in the release of carotenoids from carrot chips prepared by different processes. © 2020 Society of Chemical Industry.
Asunto(s)
Carotenoides/metabolismo , Daucus carota/química , Daucus carota/metabolismo , Manipulación de Alimentos/métodos , Carotenoides/química , Digestión , Humanos , Masticación , Tamaño de la Partícula , Raíces de Plantas/química , Raíces de Plantas/metabolismo , BocadillosRESUMEN
To better understanding the role of cell wall pectic polysaccharides (CWPs) on the formation of textural properties of carrot chips dried by instant controlled pressure drop technology (French for Détente Instantanée Contrôlée, DIC), the characteristics of CWPs from ground tissue (GT), junction of ground and vascular tissue (JT), and vascular tissue (VT) of carrot were investigated. Larger expansion volume was obtained in the carrot chips derived from GT, which accompanied with superior textural qualities compared with the chips derived from JT and VT. Remarkable differences were obtained in the amount of pectic fractions, galacturonic acid content, degree of methoxylation, sugar composition and linearity of CWPs that fractionated from different tissue zones of raw carrots. The characteristics of CWPs was confirmed to be a substantial factor that significantly affected the expansion ratio and textural properties of the DIC-dried carrot chips, which providing a mechanistic insight of the relationship between variation in CWPs and the expanding behaviors of DIC-dried fruits and vegetables.
Asunto(s)
Daucus carota/química , Polisacáridos/química , Pared Celular/química , Manipulación de Alimentos/métodos , Ácidos Hexurónicos/análisis , Pectinas/química , Polisacáridos/análisis , Presión , Azúcares/análisisRESUMEN
BACKGROUND: Osmotic pretreatment is an effective processing unit for improving the textural quality of dried fruit and vegetable snacks, whereas nutrition loss and high calorie after impregnation is still a noteworthy shortcoming of sugar-immersed products. Therefore, the use of apple juice concentrate as a clean label solution to improve the qualities of instant controlled pressure drop (DIC)-dried carrot chips was investigated. RESULTS: Apple juice concentrate impregnation substantially enhanced the physical properties of the carrot chips, including hardness (38.28 N), crispness (2.01 mm), porosity (66.72%) and homogeneous microstructure, comparable to chips obtained using sucrose and maltiltol based osmotic solutions. Additionally, compared to the sucrose and maltiltol impregnated chips, a higher retention of carotenoids (302.81 µg g-1 , dry basis), a higher multiplicity of phenolic compounds, stronger antioxidant activities and a superior sensory score were observed in the chips pretreated with apple juice concentrate. CONCLUSION: Apple juice concentrate could be used as a clean label osmotic solution to enhance the organoleptic attributes and fortify the nutritional properties of DIC-dried carrot snacks. © 2019 Society of Chemical Industry.
Asunto(s)
Daucus carota/química , Aditivos Alimentarios/análisis , Jugos de Frutas y Vegetales/análisis , Malus/química , Carotenoides/análisis , Manipulación de Alimentos/métodos , Humanos , Valor Nutritivo , Ósmosis , Fenoles/análisis , Presión , Bocadillos , GustoRESUMEN
BACKGROUND: An abundance of shiitake mushrooms is consumed in dried form around the world. In the present study, changes in water state, water distribution and microstructure of shiitake mushrooms during hot-air drying (HAD) and far-infrared radiation drying (FIRD) processes were investigated using low-field nuclear magnetic resonance and scanning electron microscopy. Quality attributes of the dried products were compared in terms of drying property, appearance, rehydration behavior, texture and storage stability. RESULTS: Compared with HAD, the rate of water diffusion and evaporation of the shiitake mushrooms dried by FIRD was higher, thus resulting in a shorter drying time (630 min), a lower water content (0.07 g g-1 wet basis) and a higher glass transition temperature (7.88 °C) for dried products. Moreover, a homogenous and porous microstructure with less shrinkage and case hardening was demonstrated by the FIRD samples, indicating a superior texture, including a larger pileus diameter (3.4 cm), a higher rehydration ratio (7.31), a lower hardness (37.93 N) and a higher crispness (1.41 mm) for FIRD shiitake mushrooms. CONCLUSION: High-quality shiitake mushrooms with a desirable texture could be produced by FIRD by enhancing the diffusion of internal water and alleviating the case hardening during a relatively short drying process. © 2018 Society of Chemical Industry.
Asunto(s)
Conservación de Alimentos/métodos , Calor , Espectroscopía de Resonancia Magnética , Microscopía Electrónica de Rastreo , Hongos Shiitake/química , Agua , Desecación , Rayos InfrarrojosRESUMEN
Effects of high pressure homogenization (HPH) on stability, water-soluble pectin (WSP) and total carotenoid bioaccessiblity (TCB) of carrot juice were investigated to reveal the feasibility of applying HPH for improving TCB and the relationships between WSP and TCB induced by HPH. Results illustrated that HPH improved the juice stability and TCB. HPH increased the uronic acid content (UAC), and decreased the degree of methoxylation (DM) and acetylation (DAc) of WSP compared to non-homogenization. However, pressure and pass showed no significant effect on UAC, DM and DAc. HPH decreased the weight-average molar mass of WSP, signifying the degradation, which was enhanced by the increasing pressure. Emulsifying activity (EA) decreased with the increasing pass and inlet temperature. Functional relationships were found between TCB and WSP characteristics (DM and EA). Lower DM and EA contributed to higher TCB. Moreover, statistical correlations were found between TCB and indicators of WSP (UAC and DAc).
Asunto(s)
Carotenoides/química , Daucus carota/química , Jugos de Frutas y Vegetales , Pectinas/química , Peso Molecular , Presión , TemperaturaRESUMEN
BACKGROUND: Computer vision-based image analysis systems are widely used in food processing to evaluate quality changes. They are able to objectively measure the surface colour of various products since, providing some obvious advantages with their objectivity and quantitative capabilities. In this study, a computer vision-based image analysis system was used to investigate the colour changes of apple slices dried by instant controlled pressure drop-assisted hot air drying (AD-DIC). RESULTS: The CIE L* value and polyphenol oxidase activity in apple slices decreased during the entire drying process, whereas other colour indexes, including CIE a*, b*, ΔE and C* values, increased. The browning ratio calculated by image analysis increased during the drying process, and a sharp increment was observed for the DIC process. The change in 5-hydroxymethylfurfural (5-HMF) and fluorescent compounds (FIC) showed the same trend with browning ratio due to Maillard reaction. Moreover, the concentrations of 5-HMF and FIC both had a good quadratic correlation (R2 > 0.998) with the browning ratio. CONCLUSION: Browning ratio was a reliable indicator of 5-HMF and FIC changes in apple slices during drying. The image analysis system could be used to monitor colour changes, 5-HMF and FIC in dehydrated apple slices during the AD-DIC process. © 2016 Society of Chemical Industry.
Asunto(s)
Manipulación de Alimentos/métodos , Frutas/química , Malus/química , Color , Manipulación de Alimentos/instrumentación , Furaldehído/análogos & derivados , Furaldehído/análisis , Procesamiento de Imagen Asistido por ComputadorRESUMEN
The hard-to-cook (HTC) defect in legumes is characterized by the inability of cotyledons to soften during the cooking process. Changes in the non-starch polysaccharides of common bean seed coat and cotyledon were studied before and after development of the HTC defect induced by storage at 35°C and 75% humidity for 8months. Distinct differences in the yields of alcohol insoluble residues, degree of methoxylation (DM), sugar composition, and molar mass distribution of non-starch polysaccharides were found between the seeds coat and cotyledons. The non-starch polysaccharide profiles, both for seed coats and cotyledons, significantly differed when comparing HTC and easy-to-cook (ETC) beans. In conclusion, differences in the structure, composition and extractability of non-starch polysaccharides between the ETC and HTC beans confirmed the significant role of pectin polysaccharides in interaction with divalent ions in the HTC development, which consequently affect their cooking behaviors.
Asunto(s)
Culinaria/métodos , Cotiledón/química , Phaseolus/química , Semillas/química , Cationes Bivalentes/química , Dureza , Humedad , Pectinas/química , Polisacáridos/análisis , Polisacáridos/químicaRESUMEN
The effects of hot air drying (AD), freeze drying (FD), infrared drying (IR), microwave drying (MV), vacuum drying (VD) as pre-drying treatments for explosion puff drying (EPD) on qualities of jackfruit chips were studied. The lowest total color differences (∆E) were found in the FD-, MV- and VD-EPD dried chips. Volume expansion effect (9.2 %) was only observed in the FD-EPD dried chips, which corresponded to its well expanded honeycomb microstructures and high rehydration rate. Compared with AD-, IR-, MV- and VD-EPD, the FD-EPD dried fruit chips exhibited lower hardness and higher crispness, indicative of a crispier texture. FD-EPD dried fruits also obtained high retentions of ascorbic acid, phenolics and carotenoids compared with that of the other puffed products. The results of sensory evaluation suggested that the FD-EPD was a more beneficial combination because it enhanced the overall qualities of jackfruit chips. In conclusion, the FD-EPD could be used as a novel combination drying method for processing valuable and/or high quality fruit chips.