Synergistically Boosting Li Storage Performance of MnWO4 Nanorods Anode via Carbon Coating and Additives.

Polyanionic structures, (MO4)n-, can be beneficial to the transport of lithium ions by virtue of the open three-dimensional frame structure. However, an unstable interface suppresses the life of the (MO4)n--based anode. In this study, MnWO4@C nanorods with dense nanocavities have been synthesized through a hydrothermal route, followed by a chemical deposition method. As a result, the MnWO4@C anode exhibits better cycle and rate performance than MnWO4 as a Li-ion battery; the capacity is maintained at 718 mAh g-1 at 1000 mA g-1 after 400 cycles because the transport of lithium ions and the contribution of pseudo-capacitance are increased. Generally, benefiting from the carbon shell and electrolyte additive (e.g., FEC), the cycle performance of the MnWO4@C electrode is also effectively improved for lithium storage.

Electrolyte Engineering with TFA- Anion-Rich Solvation Structure to Construct Highly Stable Zn2+/Na+ Dual-Salt Batteries.

Electrolyte engineering is recognized as an effective technique for high-performance aqueous zinc-ion rechargeable batteries, addressing difficulties such as free water decomposition, zinc anode corrosion, and zinc dendrite growth. Different from traditional strategies in aqueous electrolyte systems, this work focuses on organic electrolytes involving zinc trifluoroacetate hydrate (Zn(TFA)2·xH2O), sodium trifluoroacetate (NaTFA) dual-salt and acetonitrile (AN) solvent, in which trifluoroacetate anions (TFA- anions) have strong affinity toward zinc ions to form anion-rich solvates, thus inducing an inorganic-rich solid electrolyte interphase (SEI) to protect Zn from dendrite growth and side reactions. The Zn anode manifests long-term cycling over 2400 h at a current density of 0.5 mA cm-2 with a high Coulombic efficiency (CE) of 99.75%, showing an areal capacity as high as 5 mAh cm-2. Owing to the high reversibility of the sodium ions intercalation/deintercalation process in Na2MnFe(CN)6, the Zn//Na2MnFe(CN)6 full cells with the dual-salt electrolyte perform much better in terms of capacity retention than a device with Zn(TFA)2/AN electrolyte. This approach may open a new avenue for efficient zinc-ion rechargeable batteries via developing organic electrolytes.

The Optimal Head Position Following Intratympanic Injection: A Research Based on HRCT Reconstruction.

Objective: This study aimed to investigate the optimal head position (OHP) following intratympanic injection, a critical intervention in treating inner ear disorders. Identifying OHP is essential to maximize drug retention in the middle ear, thereby significantly enhancing the therapeutic efficacy by mitigating the significant issue of injectate leakage through the eustachian tube (ET). Exploratory various positions of ET orifice and round window (RW) were investigated and associated with head movements. Methods: Twenty-two (10 males and 12 females) anonymized high-resolution computed tomography (HRCT) datasets of patients without structural ear disease were selected from January 2022 to December 2022 in the study. The subjects were categorized into two groups: children (≤18 years) and adult group (>18 years). The reconstruction of the ET orifice and RW from HRCT were analyzed using Mimics software and the distances from the center point of ET orifice or the center point of RW to the reference plane were defined as distance of ET orifice (DET) and distance of RW (DRW). Results: In the supine position, the OHP for intratympanic injection was 23°of pronation and 24° of posterior extension, and the maximum distance between the ET orifice and RW (DET-RW) was 9.29 ± 2.13 mm. As the head position extended posteriorly beyond 43°, DET was relatively high compared with DRW, resulting in the OHP a fully posteriorly extended 90° of the head being the optimal position with DET-RW of 2.13 ± 1.60 mm in the supine position, however, it is not realized in human beings. Moreover, the OHP had no obvious relevance corresponding to age following intratympanic injections. Conclusion: Our study suggested that OHP after intratympanic injections treatment consists of supine position, along with a slight pronation and posterior extension.

A multifunctional dual cation doping strategy to stabilize high-voltage medium-nickel low-cobalt lithium layered oxide cathode.

High-voltage medium-nickel low-cobalt lithium layered oxide cathode materials are intriguing for lithium-ion batteries (LIBs) applications because of their relatively low cost and high capacity. Unfortunately, high charging voltage induces bulk layered structure decline and interface environment deterioration, low cobalt content reduces lithium diffusion kinetics, severely limiting the performance liberation of this kind of cathode. Here, a multifunctional Al/Zr dual cation doping strategy is employed to enhance the electrochemical performance of LiNi0.6Co0.05Mn0.35O2 (NCM) cathode at a high charging cut-off voltage of 4.5 V. On the one hand, Al/Zr co-doping weakens the Li+/Ni2+ mixing through magnetic interactions due to the inexistence of unpaired electrons for Al3+ and Zr4+, thereby increasing the lithium diffusion rate and suppressing the harmful coexistence of H1 and H2 phases. On the other hand, they enhance the lattice oxygen framework stability due to strong Al-O and Zr-O bonds, inhibiting the undesired H2 to H3 phase transition and interface lattice oxygen loss, thereby enhancing the stability of the bulk structure and cathode-electrolyte interface. As a result, Al/Zr co-doped NCM (NCMAZ) shows a 94.2 % capacity retention rate after 100 cycles, while that of NCM is only 79.4 %. NCMAZ also exhibits better rate performance than NCM, with output capacities of 92 mAh/g and 59 mAh/g at a high current density of 5C, respectively. The modification strategy will make the high-voltage medium-nickel low-cobalt cathode closer to practical applications.

Engineering a hollow bowl-like porous carbon-confined Ru-MgO hetero-structured nanopair as a high-performance catalyst for ammonia borane hydrolysis.

Exploration of high-performance catalysts holds great importance for on-demand H2 production from ammonia borane (AB) hydrolysis. In this work, a hollow bowl-like porous carbon-anchored Ru-MgO hetero-structured nano-pair with high-intensity interfaces is made, using a tailored design approach. Consequently, the optimized catalyst shows AB hydrolysis activity with a turnover frequency value of 784 min-1 in aqueous media and 1971 min-1 in alkaline solvent. Robust durability is also achieved, with slight deactivation after a ten-cycle test. Combined experimental and theoretical calculations validate the positive function of the interface between Ru and MgO for facilitating H transfer and boosting water activation, thus leading to improved AB hydrolysis performance. This study could be valuable in guiding the upgradation of Ru catalytic systems, to advance their practical applications.

Optimization Strategy in Hydrogen Storage Performance of Ti─V─Cr─Mn Alloys via LiAlH4.

V-based solid solution materials hold a significant position in the realm of hydrogen storage materials because of its high hydrogen storage capacity. However, the current dehydrogenation temperature of V-based solid solution exceeds 350 °C, making it challenging to fulfill the appliance under moderate conditions. Here advancements in the hydrogen storage properties and related mechanisms of TiV1.1Cr0.3Mn0.6 + x LiAlH4 (x = 0, 5, 8, 10 wt.%) composites is presented. According to the first principle calculation analysis, the inclusion of Al and Li atoms will lower the binding energy of hydride, thus enhancing the hydrogen absorption reaction and significantly decreasing the activation difficulty. Furthermore, based on crystal orbital Hamilton population (COHP) analysis, the strength of the V─H and Ti─H bonds after doping LiAlH4 are reduced, leading to a decrease of the hydrogen release activation energy (Ea) for the V-based solid solution material, thus the hydrogen release process is easier to carry out. Additionally, the structure of doped LiAlH4 exhibits an outstanding hydrogen release rate of 2.001 wt.% at 323 K and remarkable cycling stability.

Interfacial Engineering of Fluorinated TiO2 Nanosheets with Abundant Oxygen Vacancies for Boosting the Hydrogen Storage Performance of MgH2.

The interaction between fluorinated surface in the partially reduced nano-crystallite titanium dioxide (TiO2-x (F)) and MgH2 is studied for the first time. Compared with pristine MgH2 (416 °C), the onset desorption temperature of MgH2 +5 wt.% TiO2-x (F) composite can be dramatically lowered to 189 °C. In addition, the composite exhibits remarkable dehydrogenation kinetics, which can release 6.0 wt.% hydrogen thoroughly within 6 min at 250 °C. The apparent activation energy for dehydriding is decreased from 268.42 to 119.96 kJ mol-1 . Structural characterization and theoretical calculations indicate that the synergistic effect between multivalent Ti species, and the in situ formed MgF2 and MgF2-x Hx is beneficial for improving the hydrogen storage performance of MgH2 . Moreover, oxygen vacancies can accelerate the electron transportation and facilitate hydrogen diffusion. The study provides a novel perspective on the modification of MgH2 by fluorinated transition metal oxide catalyst.

Changes in brain gray matter volume in nasopharyngeal carcinoma patients after radiotherapy in long-term follow-up

Abstract Objectives The aim of this study was to examine the changes in gray matter in nasopharyngeal carcinoma patients with normal hearing (Group 1) and nasopharyngeal carcinoma patients with hearing loss (Group 2) after radiotherapy using voxel-based morphological analysis and to analyze the relationship with the radiation doses of the temporal lobe. Methods 21 patients in Group 1, 14 patients in Group 2, and 21 healthy volunteers were selected. All participants underwent an otologic examination and three-dimensional magnetization preparatory rapid acquisition gradient echo sequence scan. The correlation between the variation of whole brain gray matter volume and the doses of the temporal lobe was analyzed by Data Processing & Analysis for Brain Imaging software. Results Compared with the normal control group, the brain areas with reduced gray matter volume in nasopharyngeal carcinoma patients after radiotherapy were mainly in the left posterior cerebellar lobe (T = −8.797), left insular lobe (T = −7.96), and the right insular lobe (T = −6.632). Compared to Group 1, the brain areas of Group 2 patients with reduced gray matter volume were mainly in the left superior temporal gyrus (T = −2.366), left olfactory bulb (T = −2.52), left Rolandic operculum (T = −2.431), and right olfactory bulb (T = −3.100). Compared with Group 1, the brain areas of Group 2 patients with increased gray matter volume were mainly in the left calcarine sulcus (T = 3.425) and right calcarine sulcus (T = 3.169). There were no correlations between the changes of brain gray matter volume and the radiation doses of the temporal lobe in both Group 1 and Group 2. Conclusions The radiotherapy may cause the changes of brain areas associated with cognitive function in nasopharyngeal carcinoma in a long-term follow-up. At the same time, nasopharyngeal carcinoma patients with the radiation-induced hearing loss had abnormal gray matter volumes in the auditory center and other sensory centers. Our findings might provide new understanding into the pathogenesis of radiation-induced brain damage in normal-appearing brain tissue. Yet this exploratory study should be taken with caution.

Changes in brain gray matter volume in nasopharyngeal carcinoma patients after radiotherapy in long-term follow-up.

OBJECTIVES: The aim of this study was to examine the changes in gray matter in nasopharyngeal carcinoma patients with normal hearing (Group 1) and nasopharyngeal carcinoma patients with hearing loss (Group 2) after radiotherapy using voxel-based morphological analysis and to analyze the relationship with the radiation doses of the temporal lobe. METHODS: 21 patients in Group 1, 14 patients in Group 2, and 21 healthy volunteers were selected. All participants underwent an otologic examination and three-dimensional magnetization preparatory rapid acquisition gradient echo sequence scan. The correlation between the variation of whole brain gray matter volume and the doses of the temporal lobe was analyzed by Data Processing & Analysis for Brain Imaging software. RESULTS: Compared with the normal control group, the brain areas with reduced gray matter volume in nasopharyngeal carcinoma patients after radiotherapy were mainly in the left posterior cerebellar lobe (T = -8.797), left insular lobe (T = -7.96), and the right insular lobe (T = -6.632). Compared to Group 1, the brain areas of Group 2 patients with reduced gray matter volume were mainly in the left superior temporal gyrus (T = -2.366), left olfactory bulb (T = -2.52), left Rolandic operculum (T = -2.431), and right olfactory bulb (T = -3.100). Compared with Group 1, the brain areas of Group 2 patients with increased gray matter volume were mainly in the left calcarine sulcus (T=3.425) and right calcarine sulcus (T=3.169). There were no correlations between the changes of brain gray matter volume and the radiation doses of the temporal lobe in both Group 1 and Group 2. CONCLUSIONS: The radiotherapy may cause the changes of brain areas associated with cognitive function in nasopharyngeal carcinoma in a long-term follow-up. At the same time, nasopharyngeal carcinoma patients with the radiation-induced hearing loss had abnormal gray matter volumes in the auditory center and other sensory centers. Our findings might provide new understanding into the pathogenesis of radiation-induced brain damage in normal-appearing brain tissue. Yet this exploratory study should be taken with caution.

The role of medial olivocochlear activity in contralateral suppression of auditory steady-state responses.

OBJECTIVE: The auditory steady-state response (ASSR) amplitudes fall in the presence of contralateral noise. However, whether and to what extent medial olivocochlear (MOC) activity involves in contralateral suppression of ASSR remain unclear. Therefore, we assess the role of MOC activity in contralateral suppression of ASSR. METHODS: Mice were treated with strychnine to completely eliminate MOC activity and then measured ASSR amplitudes in the presence of contralateral noise. RESULTS: The contralateral noise reduces ASSR amplitudes at some stimulus intensity. After treating with the strychnine to eliminate MOC activity, ASSR amplitudes recovered again. CONCLUSIONS: MOC activity participated in contralateral suppression of ASSR.

Non-Flammable Electrolyte Enables High-Voltage and Wide-Temperature Lithium-Ion Batteries with Fast Charging.

Electrolyte design has become ever more important to enhance the performance of lithium-ion batteries (LIBs). However, the flammability issue and high reactivity of the conventional electrolytes remain a major problem, especially when the LIBs are operated at high voltage and extreme temperatures. Herein, we design a novel non-flammable fluorinated ester electrolyte that enables high cycling stability in wide-temperature variations (e.g., -50 °C-60 °C) and superior power capability (fast charge rates up to 5.0 C) for the graphite||LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) battery at high voltage (i.e., >4.3 V vs. Li/Li+ ). Moreover, this work sheds new light on the dynamic evolution and interaction among the Li+ , solvent, and anion at the molecular level. By elucidating the fundamental relationship between the Li+ solvation structure and electrochemical performance, we can facilitate the development of high-safety and high-energy-density batteries operating in harsh conditions.

The purinergic receptors 2X3 on spiral ganglion neurons enhance the medial olivocochlear reflex in mice after long-term moderate noise exposure.

Our purpose was to study the expression of purinergic receptors 2X2 (P2X2) and purinergic receptors 2X3 (P2X3) in spiral ganglion neurons (SGNs), the afferent nerves of medial olivocochlear (MOC) reflex, after long-term moderate noise exposure, and its relationship with the enhancement of MOC reflex. Mice were exposed a moderate broadband noise for 4 weeks consecutively. Then mouse hearing functions, including threshold auditory brainstem responses, distortion-product otoacoustic emissions, and MOC reflex, were evaluated and the expression of P2X2 and P2X3 on SGNs were assessed by cochlear immunofluorescence. AF-353 was injected before each noise exposure. Four weeks later, mice were also tested for hearing functions and expression of P2X2 and P2X3 on SGNs. The long-term moderate noise strengthened MOC reflex, and AF-353 reduced it in mice and P2X3 expression on SGNs increased after long-term moderate noise exposure, and AF-353 can downregulate it. The P2X3 on SGNs of mice increased after long-term moderate noise exposure, and the upregulation of it mediated the enhancement of MOC reflex.

Comparative study of the external auditory canal in humans and large mammals.

Given the limited source of human external auditory canal (EAC) skin, animal experiments remain an important approach for studying functional EAC reconstruction. However, differences between humans and animals in terms of the general EAC structure, histological characteristics of EAC skin, and cell markers of its specific glands in cartilaginous EAC skin remain unknown. We compared the characteristics of the EAC between humans and large animals, as a basis for appropriate animal model selection. Temporal bone computed tomography was used to compare the EACs of humans, goats, pigs, and dogs. EAC skin samples were harvested and their histological characteristics evaluated. The skin's ultrastructure and the histological structure of specific glands and cell markers related to cell phenotype and function were further identified. The EAC structure in goats was similar to that in humans in terms of diameter, length, and cartilaginous segment ratio of the EAC, while that of pigs and dogs differed markedly. Furthermore, histological evaluation showed that there were abundant ceruminous and sebaceous glands in the goat's cartilaginous skin, while dogs and pigs showed notably fewer of these glands in cartilaginous skin than humans. Nevertheless, ceruminous glands in all species studied showed similar expression of cell biomarkers and secretion function. Goats might have advantages in terms of surgery and reconstruction of the functional EAC skin compared to dogs and pigs and can be a useful candidate for ceruminous gland cell sources.

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.

High-voltage high-nickel low-cobalt lithium layered oxide cathodes show great application prospects for lithium-ion batteries due to their low cost and high capacity. However, deterioration of the bulk structure and the electrode-electrolyte interface will significantly endanger the cycle life and thermal stability of the battery as the nickel content and voltage increase. We present here a lattice doping strategy to greatly improve the cell performance by doping a small dose of Ti (2 mol %) in LiNi0.6Co0.05Mn0.35O2. Through density functional theory calculations, we know that the diffusion energy barrier of Li+ decreases and the activation energy of surface lattice oxygen atom loss increases after Ti doping, thereby improving the rate performance and inhibiting the undesired phase transition. The battery in situ X-ray diffraction (XRD) pattern demonstrates that Ti doping tunes the H1-H2 phase-transition process from a two-phase reaction to a single-phase reaction and inhibits the undesired H2-H3 phase transition, minimizing the mechanical degradation. The variable temperature in situ XRD reveals delayed phase-transition temperature to improve thermal stability. These improvements can be attributed to Ti doping to passivate the reactivity of the layered oxide cathode, which is fundamentally related to the strong Ti-O bond and no unpaired electrons for Ti4+. This work provides valuable strategic guidelines for the use of high-voltage high-nickel low-cobalt cathodes in lithium-ion batteries.

Unraveling the New Role of Metal-Organic Frameworks in Designing Silicon Hollow Nanocages for High-Energy Lithium-Ion Batteries.

Metal-organic framework (MOF)-derived materials are attracting considerable attention because of the moldability in compositions and structures, enabling greater performances in diverse applications. However, the nanostructural control of multicomponent MOF-based complexes remains challenging due to the complexity of reaction mechanisms. Herein, we present a surface-induced self-nucleation-growth mechanism for the zeolitic imidazolate framework (ZIF) to prepare a new type of ZIF-8@SiO2 polyhedral nanoparticles. We discover that the Zn hydroxide moieties (Zn-OH) within ZIF-8 can trigger the hydrolysis of tetraethyl orthosilicate effectively on the ZIF-8 surface precisely, avoiding the formation of free orthosilicic acid (Si(OH)4) successfully. This is a pioneering work to elucidate the importance of MOF surface properties for preparing multicomponent materials. Then, a novel well-dispersed silicon hollow nanocage (H-Si@C) modified by the carbon was prepared after removal of the ZIF-8 and magnesiothermic reduction. The as-prepared H-Si@C demonstrates an overwhelmingly high lithium storage capability and extraordinary stability in lithium-ion batteries (LIBs), particularly the impressive performances when it was matched with the LiNi0.6Co0.2Mn0.2O2 cathode in a full cell. The MOF surface-induced self-nucleation-growth strategy is useful for preparing more multifunctional materials, while the study of lithium storage performances of the H-Si@C material is practical for LIB applications.

Anatomic Measurements of Distances from Lateral Surface of Cranium to Cochlea in Congenital Aural Atresia and Stenosis Patients.

INTRODUCTION: Studies have shown that higher response levels can be obtained when the bone conduction stimulation position is closer to the cochlea. However, the morphological characteristics of round window niche and posterior tympanum in congenital aural atresia (CAA) and stenosis (CAS) patients were different from the normal. These affected the position of the cochlea at the cranial base. It was still unknown whether the distances from the cranium of CAA and CAS patients to the cochlea were the same as those of normal patients or not. OBJECTIVE: To measure distances from various points on the lateral surface of the cranium to the cochlea and the cranium thickness on these points among a CAA group, CAS group and normal control group, which may provide valuable information for the better position of bone conduction stimulation. METHODS: CT images of CAA, CAS patients and these patients' healthy sides were analyzed. Firstly, the Frankfurt horizontal plane (Pfrkt) was established. Secondly, a model of part of the cranium was three-dimensionally reconstructed. Then, the Pfrkt plane was rotated down 20, 30 and 40° according to the superior margin of the external auditory canal. At every angle, points 25, 30, 35 and 40 mm away from the superior margin of the external auditory canal were marked out on the surface of the model and recorded as P20A, P30A, P40A, P20B, etc. The spatial distances between the cranium and ipsilateral cochlea were defined as lengths of points on the surface of the model to the cochlea apex (CA), cochlear base (CB) and modiolus midpoint (MM), respectively, recorded as P20A/CA, P20A/CB, P20A/MM, P30A/CA, etc. Results and Conclusions: In all groups, the length of P20D/CA was the shortest compared to P30D/CA and P40D/CA (p < 0.05). The P20A/CB and P20A/MM were also the shortest (p < 0.05). When the Pfrkt plane was rotated down 30 and 40°, the results were the same as at 20° (p < 0.05). However, P20D, P30D and P40D were almost on the mastoid air cells. We suggest that the bone conduction stimulation position is placed closer to the ear, while avoiding the mastoid air cells in the CAA and CAS patients.

Electrolyte Chemistry in 3D Metal Oxide Nanorod Arrays Deciphers Lithium Dendrite-Free Plating/Stripping Behaviors for High-Performance Lithium Batteries.

Lithium dendrite-free deposition is crucial to stabilizing lithium batteries, where the three-dimensional (3D) metal oxide nanoarrays demonstrate an impressive capability to suppress dendrite due to the spatial effect. Herein, we introduce a new insight into the ameliorated lithium plating process on 3D nanoarrays. As a paradigm, novel 3D Cu2O and Cu nanorod arrays were in situ designed on copper foil. We find that the dendrite and electrolyte decomposition can be mitigated effectively by Cu2O nanoarrays, while the battery failed fast when the Cu nanoarrays were used. We show that Li2O (i.e., formed in the lithiation of Cu2O) is critical to stabilizing the electrolyte; otherwise, the electrolyte would be decomposed seriously. Our viewpoint is further proved when we revisit the metal (oxide) nanoarrays reported before. Thus, we discovered the importance of electrolyte stability as a precondition for nanoarrays to suppress dendrite and/or achieve a reversible lithium plating/stripping for high-performance lithium batteries.

A highly promising high-nickel low-cobalt lithium layered oxide cathode material for high-performance lithium-ion batteries.

Reducing cobalt dependency has attracted great interest for lithium batteries manufacturing due to limited cobalt resources and high prices. A highly promising LiNi0.6Co0.05Mn0.35O2 (NCM60535) high-nickel low cobalt lithium layered oxide cathode material is successfully prepared by systematically examining the two key synthesis conditions of pH and annealing temperature. The obtained materials exhibit a uniform size distribution, good spherical morphology, clear structure, and homogeneous element distribution. NCM60535 shows competitive electrochemical properties: when compared with the LiNi1/3Co1/3Mn1/3O2, with a higher output specific capacity and cycling stability at 4.3 V low voltage; when compared with the LiNi0.8Co0.1Mn0.1O2, with a comparable discharge capacity but relatively poor cycling stability at 4.5 V high voltage. A new type of electrolyte that combines high lithium salt concentration, EC-free solvent system, and VC and LiPO2F2 functional additives is designed and greatly improves the electrochemical properties of the material under high voltage. Moreover, it also delivers superior electrochemical properties in high voltage lithium full battery (270 Wh Kg-1). And we suggest that NCM60535 is expected to become a substitute for the currently widely commercialized LiNi1/3Co1/3Mn1/3O2 (NCM333), LiNi0.5Co0.2Mn0.3O2 (NCM523), LiNi0.6Co0.2Mn0.2O2 (NCM622), and LiNi0.8Co0.1Mn0.1O2 (NCM811) due to its relatively low production cost and competitive electrochemical properties.

An SiOx anode strengthened by the self-catalytic growth of carbon nanotubes.

Modification using carbon nanotubes (CNTs) is one of the most important strategies to boost the performance of materials in various applications, among which the CNT-modified silicon-based anodes have gained considerable attention in lithium-ion batteries (LIBs) due to their improved conductivity and cycle stability. However, the realization of a close-knit CNT coating on silicon (Si) through an efficient and cost-effective approach remains challenging. Herein, a new in situ self-catalytic method by acetylene treatment is presented, in which, CNTs can be directly grown and knitted on the SiOx particles to construct a conductive additive-free SiOx@CNT anode. The in situ grown CNTs can not only enhance electric conductivity and alleviate the volume effect of SiOx effectively, but also mitigate the electrolyte decomposition with improved coulombic efficiency. As a result, an extremely high capacity of 1012 mA h g-1, long lifespan over 500 cycles at a current density of 2 A g-1 as well as a good performance in full LIBs with a working potential of about 3.4 V (vs. nickel-rich cathode) were obtained. The rationally constructed SiOx@CNTs with easy synthesis and high throughput will hopefully promote LIBs with energy density above 300 W h kg-1. This study opens a new avenue to prepare CNT-decorated functional materials and brings the SiOx-based anode one step closer to practical applications.

Single-Point Mutant Inverts the Stereoselectivity of a Carbonyl Reductase toward ß-Ketoesters with Enhanced Activity.

Enzyme stereoselectivity control is still a major challenge. To gain insight into the molecular basis of enzyme stereo-recognition and expand the source of antiPrelog carbonyl reductase toward ß-ketoesters, rational enzyme design aiming at stereoselectivity inversion was performed. The designed variant Q139G switched the enzyme stereoselectivity toward ß-ketoesters from Prelog to antiPrelog, providing corresponding alcohols in high enantiomeric purity (89.1-99.1 % ee). More importantly, the well-known trade-off between stereoselectivity and activity was not found. Q139G exhibited higher catalytic activity than the wildtype enzyme, the enhancement of the catalytic efficiency (kcat /Km ) varied from 1.1- to 27.1-fold. Interestingly, the mutant Q139G did not lead to reversed stereoselectivity toward aromatic ketones. Analysis of enzyme-substrate complexes showed that the structural flexibility of ß-ketoesters and a newly formed cave together facilitated the formation of the antiPrelog-preferred conformation. In contrast, the relatively large and rigid structure of the aromatic ketones prevents them from forming the antiPrelog-preferred conformation.