Engineering bacterium for biofilm formation and L-lysine production in continuous fermentation.

Microbial biofilms provide advantages in fermentation processes. However, Corynebacterium glutamicum (C. glutamicum) usually exhibits relatively poor biofilm formation compared to other industrial strains. To develop a biofilm-enhanced fermentation process for C. glutamicum, seven genes potentially related to biofilm formation in C. glutamicum were systematically investigated, which include ppk2B, glgC, virB11, cslA, NCgl2909, NCgl0350 and exeR. Deletion of the NCgl0350, NCgl2909 genes and heterologous expression of the cslA gene were found to increase biofilm amounts by 16.9%, 21.2% and 135%, respectively, compared to the wild-type strain. Meanwhile, the production of L-lysine by engineered strains was assessed in biofilm-based continuous fermentation. The most notable result was observed for the cslA-expressing strain, which produced an average of 26.1% higher L-lysine compared with that of wild-type strain in 6-L bioreactors. In conclusion, this study offers valuable insights into the biofilm formation in C. glutamicum and its application in continuous fermentation processes.

Cordycepin mitigates dextran sulfate sodium-induced colitis through improving gut microbiota composition and modulating Th1/Th2 and Th17/Treg balance.

BACKGROUND: Imbalances in Th1/Th2 and Th17/Treg immune axes, coupled with disruptions in the gut microbiota (GM), play a pivotal role in the pathogenesis of inflammatory bowel disease (IBD). Cordycepin, a natural anti-inflammatory compound, holds promise in mitigating IBD by rebalancing these immune axes in conjunction with modulating the GM. The aim of this experiment is to investigate the potential of cordycepin in mitigating enteritis and elucidate the underlying mechanisms associated with its ameliorative effects on enteritis. METHODS: On the day of inducing experimental colitis with Dextran Sulfate Sodium (DSS), mice in the DSS + Cordycepin and Cordycepin groups received 50 mg/kg/day Cordycepin via intra-gastric administration (i.g.) for seven consecutive days, respectively. Mice in the DSS and control groups were treated with equal volumes of saline. On day 8, all mice were euthanized under pentobarbital sodium anesthesia. RESULTS: In a DSS-induced colitis mouse model, Cordycepin treatment led to a significant reduction in the disease activity index (DAI), splenic weight, and colonic pathological injury while simultaneously improving body weight and colonic length. Furthermore, it positively impacted GM composition, resulting in decreased Th1 and Th17 cells, alongside an increase in Th2 and Treg cells. The contents of the mouse colon were extracted for microbial community analysis. Mouse blood was prepared into a single-cell suspension, and flow cytometry was used to assess the expressio of Treg, Th17, Th1, and Th2 immune cells. CONCLUSIONS: These results underscored the effective intervention of cordycepin in ameliorating DSS-induced colitis by harmonizing the interplay between GM and immune homeostasis.

Dopamine-assisted surface functionalization of saccharide-responsive fibers for the controlled harvesting and continuous fermentation of Saccharomyces cerevisiae.

Continuous fermentation processes increasingly emphasized cell recycling, utilization, and renewal. In this study, to improve the sustainability of the immobilized Saccharomyces cerevisiae, the cells were recovered on the surface of the glucose-responsive supports through manipulating the competitive interactions of phenylboric acid groups between glycoproteins on the cells and glucose. Through a dopamine (DA)-assisted deposition approach, 3-acrylamidophenylboronic acid (APBA) was integrated to design the saccharide-sensitive cotton fibers (APBA@PDA-CF). The optimal co-deposition time (5 h) and ratio (1:1) resulted in an impressive immobilization efficiency of 69.64%. Meanwhile, 93.23% of Saccharomyces cerevisiae was captured and harvested on the surface of APBA@PDA-CF with the fermentation course through regulating the competitive interactions of phenylboric acid groups between glycoproteins on the cells and glucose regardless of pH. Notably, a strong interaction between the yeast cells and APBA@PDA-CF was observed at a low glucose concentration (0.1～2 g/L), with reduced sensitivity at high glucose concentrations (>5 g/L). Moreover, the ethanol production and yield could be increased to 25.37 g/L and 42.4% in the fifth-batch fermentation, respectively. Therefore, based on the feasible and versatile co-deposition method, this study not only broadened the application scope of APBA, but also explored the broad prospects of smart materials in cell immobilization, recovery and continuous fermentation.

High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent.

Dyes are indispensable for the rapid development of society, but untreated dye wastewater can threaten human health. In this study, an adsorbent (SA/SL/CCS/PEI@MNPs) was synthesized by one-pot method using magnetic nanoparticles (MNPs), sodium alginate (SA), sodium lignosulfonate (SL), carboxylated chitosan (CCS) and polyethyleneimine (PEI). The adsorbent was mesoporous micrometer-sized particles with pore size of 34.92 nm, which was favorable for dynamic column experiments. SA/SL/CCS/PEI@MNPs possessed pH-responsive performance. Under acidic condition, the maximum adsorption capacities for anionic dyes (tartrazine, reactive black-5, indigo carmine) reached >550 mg/g. Under alkaline condition, those for cationic dyes (methylene blue, methyl violet, neutral red) exceeded 1900 mg/g. The function of the various modifiers was investigated. The results indicated that the incorporation of SL, CCS and PEI was able to provide plenty of sulfonate, carboxylate and amino/imine reactive groups so that adsorption capacities of dyes were improved. The adsorption mechanism was explored by FTIR and XPS. At the same time, the adsorption mechanism was more deeply analyzed using molecular dynamics simulations and radial distribution function. It was demonstrated that the dyes adsorption on the SA/SL/CCS/PEI@MNPs was mainly due to electrostatic attraction and π-π interaction. In addition, the adsorbent had good reusability, and the removal still reached over 90 % after five cycles. In conclusion, the adsorbent displayed a broad prospect for the adsorption of organic dyes.

Influence of Different Ions on Pulse Electrodeposition of CaCO3 Scales in the Simulated Seawater.

In the circulating water system of coastal power plants, various kinds of ions have a great influence on the formation and growth of CaCO3 scales. This paper focuses on investigating the influence of existing ions on the pulse electrodeposition behaviors of CaCO3 scales. Different concentrations of ions, such as Fe3+, Mg2+, PO43- and SiO32-, are introduced to simulate the actual seawater environment, and their influence on the CaCO3 scale deposition behaviors is assessed by linear sweep voltammetry, chronoamperometry, and electrochemical impedance spectroscopy tests. The surface coverage of the CaCO3 scale layer is evaluated through the residual current density and polarization resistance values, while the crystal structure and surface compactness of the layer are confirmed by the scanning electron microscope and X-ray diffractometer tests. Results indicate that high concentrations of Mg2+, Fe3+, and PO43- ions have the most significant inhibitory effect on the pulse electrodeposition of CaCO3 scales, among which the inhibition effect of Mg2+ ions is mainly reflected in the change of crystal morphology of CaCO3, that is, the crystallization growth process is inhibited. The inhibition effect of PO43- ions is mainly reflected in the gradually reduced coverage and density of CaCO3 crystals on the electrode surface, suggesting that the crystallization nucleation process is inhibited, while Fe3+ ions have a certain inhibition effect on both the crystallization nucleation and growth processes. Furthermore, lower concentrations of SiO32- ions also display a significant inhibition effect on the crystallization nucleation and growth process, and the inhibition effect weakens with increased concentration. This study provides a theoretical basis for exploring the removal of ions in the industrial water softening field.

Water-mediated active conformational transitions of lipase on organic solvent interfaces.

When it comes to enzyme stability and their application in organic solvents, enzyme biocatalysis has emerged as a popular substitute for conventional chemical processes. However, the demand for enzymes exhibiting improved stability remains a persistent challenge. Organic solvents can significantly impacts enzyme properties, thereby limiting their practical application. This study focuses on Lipase Thermomyces lanuginose, through molecular dynamics simulations and experiments, we quantified the effect of different solvent-lipase interfaces on the interfacial activation of lipase. Revealed molecular views of the complex solvation processes through the minimum distance distribution function. Solvent-protein interactions were used to interpret the factors influencing changes in lipase conformation and enzyme activity. We found that water content is crucial for enzyme stability, and the optimum water content for lipase activity was 35 % in the presence of benzene-water interface, which is closely related to the increase of its interfacial activation angle from 78° to 102°. Methanol induces interfacial activation in addition to significant competitive inhibition and denaturation at low water content. Our findings shed light on the importance of understanding solvent effects on enzyme function and provide practical insights for enzyme engineering and optimization in various solvent-lipase interfaces.

Chloride Ions-Responsive Intelligent Coatings for the Active Protection of Degradable Biomedical Mg Alloys.

In this work, the hydroxyapatite (HA) microspheres are utilized as carriers for 8-hydroxyquinoline (8-HQ) inhibitors with a sodium alginate-silver nitrate layer (Ag-SA) added to confer chloride-responsive properties. These 8-HQ@Ag-SA-HA microspheres are subsequently integrated into poly(lactic acid) (PLA) coatings to produce biocompatible coatings. The resulting 8-HQ@Ag-SA-HA microsphere exhibits a spherical structure with a diameter of 3.16 µm. Thermogravimetric analysis indicates that the encapsulated 8-HQ inhibitors are approximately 11.83 wt %. Furthermore, the incorporation of these microspheres fills the micropores within the PLA coating, leading to a denser coating surface, enhanced wettability (contact angle value = 88°), and improved adhesion strength, thereby reinforcing the physical barrier effect. Corrosion tests reveal that the coatings exhibit increased resistance to corrosion in simulated body fluid (SBF) solutions. The released 8-HQ inhibitors in response to chloride ions form a protective layer of Mg(HQ)2, providing the coatings with self-healing properties and ensuring their durability in the SBF environment. Additionally, the cell test demonstrates a significant presence of MG-63 cells, accompanied by a low hemolysis rate of 3.81%, confirming the exceptional biocompatibility of the coatings. These findings offer valuable insights into the development of stimuli-responsive biocompatible coatings for effectively protecting Mg alloys.

Simulation and mechanism for the Ultrasound-Assisted Oiling-Out Process: A case study using Fructose-1,6-diphosphate.

Liquid-liquid separation, commonly referred to as oiling-out, frequently can occurs during crystallization, especially the anti-solvent crystallization process of phosphoryl compounds, and poses potential hurdle for high-quality product. Efficiently regulating oiling-out during crystallization remains a significant challenge. Among various techniques, ultrasound emerges as a green and effective approach to enhance the crystallization process. However, there is a dearth of in-depth research exploring the microscopic mechanisms of this process. Therefore, our research focused on the fructose-1,6-diphosphate (FDP), a typical phosphoryl compound, to gain a deeper understanding of how ultrasound influences the oiling-out process. The focused beam reflectance measurement (FBRM) technology was used to investigate the oiling-out phenomenon of FDPNa3 across various solvent ratios. In addition, the influence of ultrasound on the induction time was studied and the nucleation energy barrier was calculated. Finally, to further unravel the microscopic mechanisms, we utilized molecular simulation techniques to analyze the impact of ultrasound power on the dissolution-precipitation process. Our observations revealed a consistent oiling-out process that attainted a stable state regardless of the solvent employed. Notably, the results of the oiling-out induction time experiments indicated that ultrasound significantly reduced helped lower the nucleation energy barrier of FDP3- ions, thereby dismantling FDP3-clusters in solution. Thus, in turn, shortened the reduced induction time and promoted crystallization. Furthermore, ultrasound reduced the interactions between FDP3-ions and water molecules as well as FDP3- ions themselves. As simulated field intensity increased, these interaction forces gradually diminished, the thickness of the hydration layer surrounding the FDP3- clusters facilitating the disruption of clusters, ultimately enhancing the crystallization process.

Construction of a Synthetic Microbial Community for Enzymatic Pretreatment of Wheat Straw for Biogas Production via Anaerobic Digestion.

Biological pretreatment is a viable method for enhancing biogas production from straw crops, with the improvement in lignocellulose degradation efficiency being a crucial factor in this process. Herein, a metagenomic approach was used to screen core microorganisms (Bacillus subtilis, Acinetobacter johnsonii, Trichoderma viride, and Aspergillus niger) possessing lignocellulose-degrading abilities among samples from three environments: pile retting wheat straw (WS), WS returned to soil, and forest soil. Subsequently, synthetic microbial communities were constructed for fermentation-enzyme production. The crude enzyme solution obtained was used to pretreat WS and was compared with two commercial enzymes. The synthetic microbial community enzyme-producing pretreatment (SMCEP) yielded the highest enzymatic digestion efficacy for WS, yielding cellulose, hemicellulose, and lignin degradation rates of 39.85, 36.99, and 19.21%, respectively. Furthermore, pretreatment of WS with an enzyme solution, followed by anaerobic digestion achieved satisfactory results. SMCEP displayed the highest cumulative biogas production at 801.16 mL/g TS, which was 38.79% higher than that observed for WS, 22.15% higher than that of solid-state commercial enzyme pretreatment and 25.41% higher than that of liquid commercial enzyme pretreatment. These results indicate that enzyme-pretreated WS can significantly enhance biogas production. This study represents a solution to the environmental burden and energy use of crop residues.

Selective adsorption of anionic dyes by a macropore magnetic lignin-chitosan adsorbent.

Dyes pollution is well known for their hazardous impacts on human health and the environment. The removal of dyes from wastewater has become an important issue. In this study, magnetic micrometer-sized particles AL-CTS@MNPs were synthesized from alkaline lignin (AL) and chitosan (CTS) by "one-pot method". The adsorbent presented higher selectivity adsorption effect on anionic dyes than amphoteric and cationic dyes, and even no adsorption effect on cationic methylene blue (MB), which showed that the anionic dyes could be better separated from the other two types of dyes. The adsorption isotherms of the dyes were highly consistent with the Langmuir model, and the maximum adsorption capacity was 329.50 mg/g for methyl orange (MO) and 20.00 mg/g for rhodamine B (RhB). AL-CTS@MNPs showed good adsorption of anionic dyes (MO) in the pH range of 3-9. Meanwhile, the adsorbent AL-CTS@MNPs were also characterized, showing rough surface with specific surface areas of 37.38 m2/g, pore diameter of 95.8 nm and porosity of 17.62 %. The particle sizes were ranged from 800 µm to 1300 µm. The electrostatic attraction and π-π* electron donor-acceptor interactions were the main forces between the adsorbent and anionic dyes. While the electrostatic repulsive force between the adsorbent and the cationic dyes resulted in the non-absorption of MB by AL-CTS@MNPs. Subsequently, the adsorbent maintained a removal rate of >95 % after five adsorption-desorption cycles, demonstrating its excellent stability and recoverability. Ultimately, the prepared AL-CTS@MNPs illuminated good prospect on complex components dyes wastewater treatment.

Long-Chain Bio-Based Nylon 514 Salt: Crystal Structure, Phase Transformation, and Polymerization.

Nylon 514 is one of the new long-chain bio-based nylon materials; its raw material, 1,5-pentanediamine (PDA), is prepared by biological techniques, using biomass as the raw material. The high-performance monomer of nylon 514, 1,5-pentanediamine-tetradecanedioate (PDA-TDA) salt, was obtained through efficient crystallization methods. Here, two crystal forms of PDA-TDA, anhydrous and dihydrate, were identified and studied in this paper. From the characterization data, their crystal structures and thermal behaviors were investigated. Lattice energy was calculated to gain further insight into the relationship between thermal stability and crystal structures. The contribution of hydrogen bonds and other intermolecular interactions to the crystal structure stability have been quantified according to detailed Hirshfeld and IRI analyses. Additionally, the transformation mechanism of the anhydrate and dihydrate was established through a series of well-designed stability experiments, in which the temperature and water activity play a significant role in the structural stability of crystalline forms. Eventually, we obtained nylon 514 products with good thermal stability and low absorption using stable dihydrate powders as monomers. The properties of nylon 514 products prepared by different polymerization methods were also compared.

Solid-state fermentation of corn straw using synthetic microbiome to produce fermented feed: The feed quality and conversion mechanism.

Straw is a typical biomass resource which can be converted into high nutritional value feed via microbial fermentation. The degradation and conversion of straw using a synthetic microbial community (SMC-8) was functionally investigated to characterise its nitrogen conversion and carbon metabolism. Four species of bacteria were found to utilise >20 % of the inorganic nitrogen within 15 h, and the ratio of the diameter of fungal transparent circles (D) to the diameter of the colony (d) of the four fungal species was >1. Solid-state fermentation of corn straw increased the total amino acid (AA) content by 41.69 %. The absolute digestibility of fermented corn straw dry weight (DW) and true protein was 34.34 % and 45.29 %, respectively. Comprehensive analysis of functional proteins revealed that Aspergillus niger, Trichoderma viride, Cladosporium cladosporioides, Bacillus subtilis and Acinetobacter johnsonii produce a complex enzyme system during corn straw fermentation, which plays a key role in the degradation of lignocellulose. This study provided a new insight in utilizing corn straw.

Multiple medicinal chemistry strategies of targeting KRAS: State-of-the art and future directions.

KRAS is the most frequently mutated oncogene and drives the development and progression of malignancies, most notably non-small cell lung cancer (NSCLS), pancreatic ductal adenocarcinoma (PDAC) and colorectal cancer (CRC). However, KRAS proteins have maintained the reputation of being "undruggable" due to the lack of suitable deep pockets on its surface. One major milestone for KRAS inhibition was the discovery of the covalent inhibitors bond to the allosteric switch-II pocket of the KRASG12C protein. To date, the FDA has approved two KRASG12C inhibitors, sotorasib and adagrasib, for the treatment of patients with KRASG12C-driven cancers. Researchers have paid close attention to the development of inhibitors for other KRAS mutations and upstream regulatory factors. The KRAS targeted drug discovery has entered a state of rapid development. This article has aimed to present the current state of the art of drug development in the KRAS field. We systematically summarize recent advances in the discovery and optimization processes of direct KRAS inhibitors (including KRASG12C, KRASG12D, KRASG12A and KRASG12R inhibitors), indirect KRAS inhibitors (SOS1 and SHP2 inhibitors), pan-KRAS inhibitors, as well as proteolysis-targetingchimeras degrades and molecular chaperone modulators from the perspective of medicinal chemistry. We also discuss the current challenges and opportunities of KRAS inhibition and hope to shed light on future KRAS drug discovery.

Properties of Ophioglossum vulgatum L. extract Pickering emulsion stabilized by carbon dots and its potential use in cosmetics.

Ophioglossum vulgatum L. (O. vulgatum) is a species of fern used in traditional Chinese medicine, however, its application in cosmetics has not yet been studied. This study obtained O. vulgatum extract using 70% ethanol solution and evaporation. Fourier Transform Infrared Spectrometer (FTIR) analysis identified many active components in O. vulgatum extract, such as polyols, amino acids, and flavonoids. A Pickering emulsion of O. vulgatum extract was also prepared, stabilized by a type of carbon dot based on l-arginine (CDs-Arg). The prepared Pickering emulsion was characterized by metallographic microscope and contact angle measurement. The results demonstrated that it was a pH-responsive O/W emulsion. Facial cleanser was then created using the prepared Pickering emulsion as the main component. When squeezed onto hands, the cleanser produced many delicate foams and caused no skin irritation. The prepared Pickering emulsion facilitated the use of O. vulgatum in facial cleanser.

DNA flexible chain modified MOFs as a versatile platform for chemoenzymatic cascade reactions in glucose catalysis.

Glucose oxidase (GOD) is widely used in the pharmaceutical industry, fermentation products and glucose biosensors for its essential role in catalyzing the conversion of glucose to gluconic acid and hydrogen peroxide (H2O2). As H2O2 is the by-product and will have a toxic effect on glucose oxidase, so introducing another enzyme that could consume H2O2 to form an enzymatic cascade reaction is a practical solution. However, this decision will lead to extra expenses and complex condition optimization such as the specific mass ratio, temperature and pH to improve the activity, stability and recyclability. Herein, we describe a mild and versatile strategy by anchoring GOD on carboxyl-activated MOF (Cu-TCPP(Fe)) through DNA-directed immobilization (DDI) technology. Robust MOF nanosheets were utilized as not only the carrier for the immobilization of GOD, but also a peroxidase-like catalyst for the decomposition of H2O2 to reduce its harmful impacts. In this work, the immobilized GOD retained 55.78% of its initial activity after being used for 7 times. More than 60% of the immobilized enzyme's catalytic activity was still maintained after 96 h of being stored at 50 â„ƒ. This study provides a new idea for preparing immobilized enzymes with enhanced stability, fast diffusion and high activity, which can be used in fields such as biocatalysis and biotechnology.

Synthesis of 3-Phenylserine by a Two-enzyme Cascade System with PLP Cofactor.

A two-enzyme cascade system containing ω-transaminase (ω-TA) and L-threonine aldolase (L-ThA) was reported for the synthesis of 3-Phenylserine starting from benzylamine, and PLP was utilized as the only cofactor in these both two enzymes reaction system. Based on the transamination results, benzylamine was optimized as an advantageous amino donor as confirmed by MD simulation results. This cascade reaction system could not only facilitate the in situ removal of the co-product benzaldehyde, enhancing the economic viability of the reaction, but also establish a novel pathway for synthesizing high-value phenyl-serine derivatives. In our study, nearly 95 % of benzylamine was converted, yielding over 54 % of 3-Phenylserine under the optimized conditions cascade reaction.

Single-cell RNA sequencing indicates cordycepin remodels the tumor immune microenvironment to enhance TIGIT blockade's anti-tumor effect in colon cancer.

Both preclinical and clinical studies have extensively proven the effectiveness of TIGIT inhibitors in tumor immunotherapy. However, it has been discovered that the presence of CD226 on tumor-infiltrating lymphocytes is crucial for the effectiveness of both anti-TIGIT therapy alone and when combined with anti-PD-1 therapy for tumors. In our investigation, we observed that cordycepin therapy significantly augmented the expression of the Cd226 gene. As a result, it was hypothesized that cordycepin therapy could enhance the effectiveness of anti-TIGIT therapy. By employing single-cell RNA sequencing analysis of immune cells in the MC38 tumor model, we discovered that cordycepin combined with anti-TIGIT therapy led to a significant increase in the proportion of NK cells within the tumor immune microenvironment. This increased NK cell activity and decreased the expression of inhibitory receptors and exhaustion marker genes. In the combination therapy group, CD8+ T cells had lower exhaustion state scores and increased cytotoxicity, indicating a better immune response. The combination therapy group increased DCs in the tumor immune microenvironment and promoted cellular interaction with CD4+ T cell and CD8+ T cell populations while decreasing Treg cell interactions. In conclusion, cordycepin with anti-TIGIT therapy in colon cancer could reshape the tumor immune microenvironment and have notable anticancer effects.

Xylan cinnamoylation for reinforcing poly (butylene adipate-co-terephthalate): Molecule design and interaction optimization.

PBAT composites with biomass fillers have gained considerable attention as alternatives to non-biodegradable plastics. This work employed xylan derivatives as fillers for PBAT composites. Xylan was modified by introducing cinnamoyl side groups which limit the hydrogen bonding and construct π-π stacking interactions with PBAT chains. The resultant xylan cinnamates (XCi) show degree of substitution (DS) of 0.55-1.89, glass-transition temperatures (Tg) of 146.5-175.0 °C and increased hydrophobicity, which can be simply controlled by varying the molar ratio of reactants. NMR results demonstrate that the C3-OH of xylopyranosyl unit is more accessible to cinnamoylation. XCi fillers (30-50 wt%) were incorporated into PBAT through melt compounding. The filler with a DS of 0.97 exhibited the optimal reinforcing effect, showing superior tensile strength (19.4 MPa) and elongation at break (330.9 %) at a high filling content (40 wt%), which is even beyond the neat PBAT. SEM and molecular dynamics simulation suggest improved compatibility and strengthened molecular interaction between XCi and PBAT, which explains the suppressed melting/crystallization behavior, the substantial increase in Tg (-34.5 â†’ -1.8 °C) and the superior mechanical properties of the composites. This research provides valuable insights into the preparation of high-performance composites by designing the molecular architecture of xylan and optimizing the associated interactions.

Cordycepin remodels the tumor microenvironment of colorectal cancer by down-regulating the expression of PD-L1.

PURPOSE: Colorectal cancer, as a common malignant tumor, poses a serious threat to human life. Cordycepin, derived from Cordyceps militaris extract, which was established as a capable inhibitor of tumor growth. Nevertheless, the precise antitumor mechanism of cordycepin in colorectal cancer cells remains elusive. METHODS: Herein, our initial focus was to explore the tumor-suppressive impact of cordycepin through its influence on various biological functions in murine colorectal cancer cells, conducted by an in vitro setting. First, we investigated the tumor-suppressive effect of cordycepin on the regulation of biological functions in murine colorectal cancer cells in vitro. Furthermore, we evaluated the in vivo antitumor potential of cordycepin using a mouse preclinical tumor model, and further explored the antitumor mechanism. RESULTS: Our findings revealed that cordycepin effectively inhibit the proliferation, invasion, and migration of murine colon cancer cells. Moreover, there is a substantial reduction in the expression of PD-L1 observed in tumor cells, in response to cordycepin treatment. Collectively, these results demonstrate the significant tumor-suppressive attributes of cordycepin against colorectal cancer. Consequently, our study lays a solid foundation for the potential clinical utilization of cordycepin in cancer therapy. CONCLUSION: Cordycepin inhibits the biological functions of colorectal cancer cells and suppresses tumor growth by reducing the expression of PD-L1.

Recent Advances of Lignin Functionalization for High-Performance and Advanced Functional Rubber Composites.

The biomass lignin is the only large-volume renewable feedstock that is composed of aromatics but has been largely underutilized and is sought for valorization as a value-added material. Recent research has highlighted lignin as a promising alternative to traditional petrol-based reinforcements and functional additives for rubber composites. This review summarized the recent advances in the functionalization of lignin for a variety of rubber composites, as well as the compounding techniques for effectively dispersing lignin within the rubber matrix. Significant progress has been achieved in the development of high-performance and advanced functional rubber/lignin composites through carefully designing the structure of lignin-based additives and the optimization of interfacial morphologies. This Review discussed the effect of lignin on composite properties, including mechanical reinforcement, dynamic properties, antiaging performance, and oil resistance, and also the advanced stimuli-responsive performance in detail. A critical analysis for the future development of rubber/lignin composites is presented as concluding remarks.