RESUMEN
To develop next-generation lithium-ion batteries with enhanced stability and safety, it is crucial to understand the physicochemical principles of nonaqueous electrolytes. Kohlrausch's law describes a linear decrease in the molar conductivity (Λ) with respect to the square root of the molarity of strong electrolytes at lower concentrations. This empirical law explains the impeded ionic mobility at higher concentrations due to ionic interactions, i.e., relaxation and asymmetric effects. However, this law does not hold at higher concentrations due to the ionic association that alleviates the ionic interactions and retards the decrease in the Λ. Especially, the anomalously stagnant decrease in the Λ near the solubility limit has not been clearly explained, calling for the consideration of other concentration-dependent factors such as the mean activity coefficient (γ±), viscosity (η), and dielectric constant (ε). Herein, we develop a systematic method to modify Kohlrausch's law. First, we install the ionic association constant, and the theoretical estimation is compared with the experimental results to induce the correction function that is related with the previously neglected concentration-dependent factors. Thus, the induced correction function was close to the rectified linear unit (ReLU) function, which has been widely used in the field of artificial intelligence. The modified Kohlrausch's law with the ReLU-type correction function provides a highly precise and reliable data fitting, and the fitted parameters showed clear concentration dependency and straightforward interpretability. As a result, this method effectively generalized Kohlrausch's law for nonaqueous electrolytes at higher concentrations up to the solubility limit of 3.0-3.5 M. Moreover, the modified Kohlrausch's law inspired us to discover the physical origins of the anomalously stagnant Λ profiles near the solubility limit; and the most relevant physical origin of the anomaly was the concentration dependency of the γ± and η, which grow exponentially above a critical concentration.
RESUMEN
Invited for this month's cover are the groups of Prof. Hyun Deog Yoo and Prof. Jin Kyoon Park at Pusan National University, and Prof. Ji Heon Ryu at Tech University of Korea (Republic of Korea). The cover image illustrates the generation of tailor-made pores by the electrochemical activation of expanded graphite for a magnesium-organocation hybrid battery. The Research Article itself is available at 10.1002/cssc.202300035.
Asunto(s)
Grafito , Humanos , Magnesio , Suministros de Energía EléctricaRESUMEN
Persisting limitations of lithium-ion batteries (LIBs) in terms of safety, energy and power density, natural resources, and the price call for expeditious research to develop the "beyond Li-ion" technologies. In this regard, magnesium-organocation hybrid batteries (MOHB) hold the potential to address the above issues associated with LIBs by utilizing abundant and inexpensive elements of magnesium and carbon for the anode and cathode, respectively. Moreover, magnesium metal anode is highly energy-dense yet less susceptible to the dendrite formation, enabling safer operation compared to lithium metal anodes. In this study, we targeted to increase the capacity and rate capability of porous carbon cathode of MOHB by generating tailor-made pores, which were provided by the interlayer accommodation of solvated organic cations with controlled sizes during the electrochemical activation of expanded graphite. Our electrochemically activated expanded graphite can be used as an efficient cathode in MOHB with enhanced kinetics, specific capacitance, and cycle life.
Asunto(s)
Grafito , Magnesio , Litio , Carbono , Capacidad EléctricaRESUMEN
Owing to its abundance, high theoretical capacity, and low electrode potential, zinc is one of the most important metallic anodes for primary and secondary batteries such as alkaline and zinc-air batteries. In the operation of zinc-based batteries, passivation of the anode surface plays an essential role because the electrode potential of zinc is slightly below that of the hydrogen evolution reaction. Therefore, it is important to scrutinize the nature of the passivation film to achieve anticorrosion inside batteries. Herein, the potential-dependent formation and removal of the passivation film during the deposition and dissolution of zinc metal in aqueous electrolytes are detected via electrochemical quartz crystal microbalance analysis. Film formation was not noticeable in hydroxide-based electrolytes; however, sulfate-based electrolytes induced potential-dependent formation and removal of the passivation film, enabling a superior coulombic efficiency of 99.37% and significantly reducing the rate of corrosion of the zinc-metal anodes. These observations provide insights into the development of advanced electrolytes for safe and stable energy-storage devices based on zinc-metal anodes.
RESUMEN
The development of stable and efficient electrocatalysts is of key importance for the establishment of a sustainable society. The activity of a metal electrocatalyst is determined by its electrochemically active surface area and intrinsic activity, which can be increased using highly porous structures and heteroatomic doping, respectively. Herein, we propose a general strategy of generating mesopores and residual oxygen in metal electrocatalysts by reduction of metastable metal oxides using Ag2O3 electrodeposited onto carbon paper as a model system and demonstrating that the obtained multipurpose porous Ag electrocatalyst has high activity for the electroreduction of O2 and CO2. The presence of mesopores and residual oxygen is confirmed by electrochemical and spectroscopic techniques, and quantum mechanical simulations prove the importance of residual oxygen for electrocatalytic activity enhancement. Thus, the adopted strategy is concluded to allow the synthesis of highly active metal catalysts with controlled mesoporosity and residual oxygen content.
RESUMEN
α-V2O5 has been extensively explored as a Mg2+ intercalation host with potential as a battery cathode, offering high theoretical capacities and potentials vs. Mg2+/Mg. However, large voltage hysteresis is observed with Mg insertion and extraction, introducing significant and unacceptable round-trip energy losses with cycling. Conventional interpretations suggest that bulk ion transport of Mg2+ within the cathode particles is the major source of this hysteresis. Herein, we demonstrate that nanosizing α-V2O5 gives a measurable reduction to voltage hysteresis on the first cycle that substantially raises energy efficiency, indicating that mechanical formatting of the α-V2O5 particles contributes to hysteresis. However, no measurable improvement in hysteresis is found in the nanosized α-V2O5 in latter cycles despite the much shorter diffusion lengths, suggesting that other factors aside from Mg transport, such as Mg transfer between the electrolyte and electrode, contribute to this hysteresis. This observation is in sharp contrast to the conventional interpretation of Mg electrochemistry. Therefore, this study uncovers critical fundamental underpinning limiting factors in Mg battery electrochemistry, and constitutes a pivotal step towards a high-voltage, high-capacity electrode material suitable for Mg batteries with high energy density.
RESUMEN
V2O5 is of interest as a Mg intercalation electrode material for Mg batteries, both in its thermodynamically stable layered polymorph (α-V2O5) and in its metastable tunnel structure (ζ-V2O5). However, such oxide cathodes typically display poor Mg insertion/removal kinetics, with large voltage hysteresis. Herein, we report the synthesis and evaluation of nanosized (ca. 100 nm) ζ-V2O5 in Mg-ion cells, which displays significantly enhanced electrochemical kinetics compared to microsized ζ-V2O5. This effect results in a significant boost in stable discharge capacity (130 mA h g-1) compared to bulk ζ-V2O5 (70 mA h g-1), with reduced voltage hysteresis (1.0 V compared to 1.4 V). This study reveals significant advancements in the use of ζ-V2O5 for Mg-based energy storage and yields a better understanding of the kinetic limiting factors for reversible magnesiation reactions into such phases.
RESUMEN
Research studies on zinc metal-based batteries have attracted considerable attention as a candidate for post-lithium-ion batteries. Zinc is one of the few metal anodes that is compatible with aqueous and non-aqueous electrolytes, providing a large theoretical capacity of 820 mAh g-1. However, in aqueous electrolytes, the zinc metal anode suffers from hydrogen evolution reaction (HER), by which zinc is irreversibly consumed or corroded continually. Exact estimation of the corrosion rate has been a challenge in the development of Zn-based batteries. Measurement of the corrosion rate by conventional Tafel analysis meets serious problems because the cathodic current reflects deposition of Zn metal as well as HER, inhibiting exact measurement of the corrosion rate. Herein, we developed a chronocoulometric "deposition-rest-dissolution" method to quantify the corrosion rate without such interference from the deposition of Zn. The method was successfully applied to the quantification of the rate of chemical corrosion of Zn in aqueous electrolytes with various pH and concentration values. The "deposition-rest-dissolution" method and electrochemical impedance spectroscopy confirmed that saturated ZnSO4 (ca. 3.2 M) + 0.075 M Li2SO4 delivers the lowest corrosion rate compared to the other electrolytes, probably because the activity of water in such a concentrated electrolyte is low enough to suppress the kinetics of HER. Moreover, this method can be generally applied to determine the rate of chemical corrosion on various metal electrodes.
RESUMEN
While commercial Li-ion batteries offer the highest energy densities of current rechargeable battery technologies, their energy storage limit has almost been achieved. Therefore, there is considerable interest in Mg batteries, which could offer increased energy densities in comparison to Li-ion batteries if a high-voltage electrode material, such as a transition-metal oxide, can be developed. However, there are currently very few oxide materials which have demonstrated reversible and efficient Mg2+ insertion and extraction at high voltages; this is thought to be due to poor Mg2+ diffusion kinetics within the oxide structural framework. Herein, the authors provide conclusive evidence of electrochemical insertion of Mg2+ into the tetragonal tungsten bronze V4Nb18O55, with a maximum reversible electrochemical capacity of 75 mA h g-1, which corresponds to a magnesiated composition of Mg4V4Nb18O55. Experimental electrochemical magnesiation/demagnesiation revealed a large voltage hysteresis with charge/discharge (1.12 V vs Mg/Mg2+); when magnesiation is limited to a composition of Mg2V4Nb18O55, this hysteresis can be reduced to only 0.5 V. Hybrid-exchange density functional theory (DFT) calculations suggest that a limited number of Mg sites are accessible via low-energy diffusion pathways, but that larger kinetic barriers need to be overcome to access the entire structure. The reversible Mg2+ intercalation involved concurrent V and Nb redox activity and changes in crystal structure, as confirmed by an array of complementary methods, including powder X-ray diffraction, X-ray absorption spectroscopy, and energy-dispersive X-ray spectroscopy. Consequently, it can be concluded that the tetragonal tungsten bronzes show promise as intercalation electrode materials for Mg batteries.
RESUMEN
Chromium oxides with the spinel structure have been predicted to be promising high voltage cathode materials in magnesium batteries. Perennial challenges involving the mobility of Mg2+ and reaction kinetics can be circumvented by nano-sizing the materials in order to reduce diffusion distances, and by using elevated temperatures to overcome activation energy barriers. Herein, ordered 7 nm crystals of spinel-type MgCr2O4 were synthesized by a conventional batch hydrothermal method. In comparison, the relatively underexplored Continuous Hydrothermal Flow Synthesis (CHFS) method was used to make highly defective sub-5 nm MgCr2O4 crystals. When these materials were made into electrodes, they were shown to possess markedly different electrochemical behavior in a Mg2+ ionic liquid electrolyte, at moderate temperature (110 °C). The anodic activity of the ordered nanocrystals was attributed to surface reactions, most likely involving the electrolyte. In contrast, evidence was gathered regarding the reversible bulk deintercalation of Mg2+ from the nanocrystals made by CHFS. This work highlights the impact on electrochemical behavior of a precise control of size and crystal structure of MgCr2O4. It advances the understanding and design of new cathode materials for Mg-based batteries.
RESUMEN
Magnesium rechargeable batteries potentially offer high-energy density, safety, and low cost due to the ability to employ divalent, dendrite-free, and earth-abundant magnesium metal anode. Despite recent progress, further development remains stagnated mainly due to the sluggish scission of magnesium-chloride bond and slow diffusion of divalent magnesium cations in cathodes. Here we report a battery chemistry that utilizes magnesium monochloride cations in expanded titanium disulfide. Combined theoretical modeling, spectroscopic analysis, and electrochemical study reveal fast diffusion kinetics of magnesium monochloride cations without scission of magnesium-chloride bond. The battery demonstrates the reversible intercalation of 1 and 1.7 magnesium monochloride cations per titanium at 25 and 60 °C, respectively, corresponding to up to 400 mAh g-1 capacity based on the mass of titanium disulfide. The large capacity accompanies with excellent rate and cycling performances even at room temperature, opening up possibilities for a variety of effective intercalation hosts for multivalent-ion batteries.Magnesium rechargeable batteries potentially offer high-energy density, safety, and low cost. Here the authors show a battery that reversibly intercalates magnesium monochloride cations with excellent rate and cycle performances in addition to the large capacity.
RESUMEN
The energy density of rechargeable batteries utilizing metals as anodes surpasses that of Li ion batteries, which employ carbon instead. Among possible metals, magnesium represents a potential alternative to the conventional choice, lithium, in terms of storage density, safety, stability, and cost. However, a major obstacle for metal-based batteries is the identification of electrolytes that show reversible deposition/dissolution of the metal anode and support reversible intercalation of ions into a cathode. Traditional Grignard-based Mg electrolytes are excellent with respect to the reversible deposition of Mg, but their limited anodic stability and compatibility with oxide cathodes hinder their applicability in Mg batteries with higher voltage. Non-Grignard electrolytes, which consist of ethereal solutions of magnesium(II) bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2), remain fairly stable near the potential of Mg deposition. The slight reactivity of these electrolytes toward Mg metal can be remedied by the addition of surface-protecting agents, such as MgCl2. Hence, ethereal solutions of Mg(TFSI)2 salt with MgCl2 as an additive have been suggested as a representative non-Grignard Mg electrolyte. In this work, the degradation mechanisms of a Mg metal anode in the TFSI-based electrolyte were studied using a current density of 1 mA cm-2 and an areal capacity of â¼0.4 mAh cm-2, which is close to those used in practical applications. The degradation mechanisms identified include the corrosion of Mg metal, which causes the loss of electronic pathways and mechanical integrity, the nonuniform deposition of Mg, and the decomposition of TFSI- anions. This study not only represents an assessment of the behavior of Mg metal anodes at practical current density and areal capacity but also details the outcomes of interfacial passivation, which was detected by simple cyclic voltammetry experiments. This study also points out the absolute absence of any passivation at the electrode-electrolyte interface for the premise of developing electrolytes compatible with a metal anode.
RESUMEN
Hybrid supercapacitors that follow a "rocking-chair"-type mechanism were developed by coupling divalent metal and activated carbon electrodes in nonaqueous electrolytes. Conventional supercapacitors require a large amount of electrolyte to provide a sufficient quantity of ions to the electrodes, due to their Daniell-type mechanism that depletes the ions from the electrolyte while charging. The alternative "rocking-chair"-type mechanism effectively enhances the energy density of supercapacitors by minimizing the necessary amount of electrolyte, because the ion is replenished from the metal anode while it is adsorbed to the cathode. Newly developed nonaqueous electrolytes for Mg and Zn electrochemistry, based on bis(trifluoromethylsulfonyl)imide (TFSI) salts, made the metal hybrid supercapacitors possible by enabling reversible deposition on the metal anodes and reversible adsorption on an activated carbon cathode. Factoring in gains through the cell design, the energy density of the metal hybrid supercapacitors is projected to be a factor of 7 higher than conventional devices thanks to both the "rocking-chair"-type mechanism that minimizes total electrolyte volume and the use of metal anodes, which have substantial merits in capacity and voltage. Self-discharge was also substantially alleviated compared to conventional supercapacitors. This concept offers a route to build supercapacitors that meet dual criteria of power and energy densities with a simple cell design.
RESUMEN
Hybrid magnesium-lithium-ion batteries (MLIBs) featuring dendrite-free deposition of Mg anode and Li-intercalation cathode are safe alternatives to Li-ion batteries for large-scale energy storage. Here we report for the first time the excellent stability of a high areal capacity MLIB cell and dendrite-free deposition behavior of Mg under high current density (2 mA cm(-2)). The hybrid cell showed no capacity loss for 100 cycles with Coulombic efficiency as high as 99.9%, whereas the control cell with a Li-metal anode only retained 30% of its original capacity with Coulombic efficiency well below 90%. The use of TiS2 as a cathode enabled the highest specific capacity and one of the best rate performances among reported MLIBs. Postmortem analysis of the cycled cells revealed dendrite-free Mg deposition on a Mg anode surface, while mossy Li dendrites were observed covering the Li surface and penetrated into separators in the Li cell. The energy density of a MLIB could be further improved by developing electrolytes with higher salt concentration and wider electrochemical window, leading to new opportunities for its application in large-scale energy storage.
RESUMEN
Mg rechargeable batteries (MgRBs) represent a safe and high-energy battery technology but suffer from the lack of suitable cathode materials due to the slow solid-state diffusion of the highly polarizing divalent Mg ion. Previous methods improve performance at the cost of incompatibility with anode/electrolyte and drastic decrease in volumetric energy density. Herein we report interlayer expansion as a general and effective atomic-level lattice engineering approach to transform inactive intercalation hosts into efficient Mg storage materials without introducing adverse side effects. As a proof-of-concept we have combined theory, synthesis, electrochemical measurement, and kinetic analysis to improve Mg diffusion behavior in MoS2, which is a poor Mg transporting material in its pristine form. First-principles simulations suggest that expanded interlayer spacing allows for fast Mg diffusion because of weakened Mg-host interactions. Experimentally, the expansion was realized by inserting a controlled amount of poly(ethylene oxide) into the lattice of MoS2 to increase the interlayer distance from 0.62 nm to up to 1.45 nm. The expansion boosts Mg diffusivity by 2 orders of magnitude, effectively enabling the otherwise barely active MoS2 to approach its theoretical storage capacity as well as to achieve one of the highest rate capabilities among Mg-intercalation materials. The interlayer expansion approach can be leveraged to a wide range of host materials for the storage of various ions, leading to novel intercalation chemistry and opening up new opportunities for the development of advanced materials for next-generation energy storage.
RESUMEN
Herein the first inorganic magnesium salt solution capable of highly reversible magnesium electrodeposition is presented. Synthesized by acid-base reaction of MgCl2 and Lewis acidic compounds such as AlCl3, this salt class demonstrates upwards of 99% Coulombic efficiency, deposition overpotential of <200 mV, and anodic stability of 3.1 V.
RESUMEN
Electrochemical, surface, and structural studies related to rechargeable Mg batteries were carried out with monolithic thin-film cathodes comprising layered V2O5 and MoO3. The reversible intercalation reactions of these electrodes with Mg ion in nonaqueous Mg salt solutions were explored using a variety of analytical tools. These included slow-scan rate cyclic voltammetry (SSCV), chrono-potentiometry (galvanostatic cycling), Raman and photoelectron spectroscopies, high-resolution microscopy, and XRD. The V2O5 electrodes exhibited reversible Mg-ion intercalation at capacities around 150-180 mAh g(-1) with 100% efficiency. A capacity of 220 mAh g(-1) at >95% efficiency was obtained with MoO3 electrodes. By applying the electrochemical driving force sufficiently slowly it was possible to measure the electrodes at equilibrium conditions and verify by spectroscopy, microscopy, and diffractometry that these electrodes undergo fully reversible structural changes upon Mg-ion insertion/deinsertion cycling.