Effects and improvement mechanisms of ultrasonic pretreatment on the quality of fermented skim milk.

Fermented skim milk is an ideal food for consumers such as diabetic and obese patients, but its low-fat content affects its texture and viscosity. In this study, we developed an effective pretreatment method for fermented skim milk using low-frequency ultrasound (US), and investigated the molecular mechanism of the corresponding quality improvement. The skim milk samples were treated by optimal ultrasonication conditions (336 W power for 7 min at 3 °C), which improved the viscosity, water-holding capacity, sensory attributes, texture, and microstructure of fermented skim milk (P < 0.05). Further mechanistic analyses revealed that the US treatment enhanced the exposure of fluorescent amino acids within proteins, facilitating the cross-linking between casein and whey. The increased surface hydrophobicity of fermented milk indicates that the US treatment led to the exposure of hydrophobic amino acid residues inside proteins, contributing to the formation of a denser gel network; the average particle size of milk protein was reduced from 24.85 to 18.06 µm, which also contributed to the development of a softer curd texture. This work is the first attempt to explain the effect of a low-frequency ultrasound treatment on the quality of fermented skim milk and discuss the molecular mechanism of its improvement.

ß-Carotene Protects Mice against Lipopolysaccharide and D-Galactosamine Induced Acute Liver Injury via Regulation of NF-κB, MAPK, and Nrf2 Signaling.

Acute liver injury (ALI), posing a serious threaten to our life, has emerged as a public health issue around the world. ß-carotene has plenty of pharmacologic effects, such as anti-inflammatory, antioxidant, and antitumor activities. In this study, we focused on studying the protective role and potential molecular mechanisms of ß-carotene against D-galactosamine (D-GalN) and lipopolysaccharide (LPS) induced ALI. Our results indicated that ß-carotene pretreatment effectively hindered abnormal changes induced by LPS/D-GalN in liver histopathology. Meanwhile, serum levels of alanine aminotransferase (ALT) and aspartate aminotransferase (AST) were downgraded with ß-carotene pretreatment. ß-carotene pretreatment also decreased malondialdehyde content and myeloperoxidase activity, increased glutathione peroxidase and superoxide dismutase levels, and reduced the levels of tumor necrosis factor-a (TNF-α) and interleukin 6 (IL-6) in liver tissues. Further investigations found that ß-carotene mediated multiple signaling pathways in LPS/D-GalN-induced ALI, inhibiting NF-κB and MAPK signaling and upregulating the expression of Nrf2 and HO-1 proteins. All findings indicate that ß-carotene appears to protect mice against LPS/D-GalN induced ALI by reducing oxidative stress and inflammation, possibly via regulating NF-κB, MAPK, and Nrf2 signaling.

Saxitoxin induces the release of human neutrophil extracellular traps.

Saxitoxin (STX) is a potent shellfish toxin found in freshwater and marine ecosystems which threatens human health by contaminating drinking water and shellfish. The formation of neutrophil extracellular traps (NETs) is a defense mechanism employed by polymorphonuclear leukocytes (PMNs) to destroy invading pathogens, and also plays a critical role in the pathogenesis of various diseases. In this study, we aimed to investigate the role of STX on human NET formation. Typical NETs-associated characteristics were detected from STX-stimulated PMNs using immunofluorescence microscopy. Moreover, NET quantification based on PicoGreen® fluorescent dye revealed that STX triggered NET formation in a concentration-dependent manner, and NET formation peaked at 120 min (with a total time of 180 min) after induction by STX. Intracellular reactive oxygen species (iROS) detection showed that iROS were significantly elevated in STX-challenged PMNs. These findings present insight into the effects of STX on human NET formation and serve as a basis for further investigations of STX immunotoxicity.

Optical Simulation and Experimental Assessment with Time-Walk Correction of TOF-PET Detectors with Multi-Ended Readouts.

As a commonly used solution, the multi-ended readout can measure the depth-of-interaction (DOI) for positron emission tomography (PET) detectors. In the present study, the effects of the multi-ended readout design were investigated using the leading-edge discriminator (LED) triggers on the timing performance of time-of-flight (TOF) PET detectors. At the very first, the photon transmission model of the four detectors, namely, single-ended readout, dual-ended readout, side dual-ended readout, and triple-ended readout, was established in Tracepro. The optical simulation revealed that the light output of the multi-ended readout was higher. Meanwhile, the readout circuit could be triggered earlier. Especially, in the triple-ended readout, the light output at 0.5 ns was observed to be nearly twice that of the single-ended readout after the first scintillating photon was generated. Subsequently, a reference detector was applied to test the multi-ended readout detectors that were constructed from a 6 × 6 × 25 mm3 LYSO crystal. Each module is composed of a crystal coupled with multiple SiPMs. Accordingly, its timing performance was improved by approximately 10% after the compensation of fourth-order polynomial fitting. Finally, the compensated full-width-at-half-maximum (FWHM) coincidence timing resolutions (CTR) of the dual-ended readout, side dual-ended readout, and triple-ended readout were 216.9 ps, 231.0 ps, and 203.6 ps, respectively.

Design study of a PET detector with 0.5 mm crystal pitch for high-resolution preclinical imaging.

Preclinical positron emission tomography (PET) is a sensitive and quantitative molecule imaging modality widely used in characterizing the biological processes and diseases in small animals. The purpose of this study is to investigate the methods to optimize a PET detector for high-resolution preclinical imaging. The PET detector proposed in this study consists of a 28 × 28 array of LYSO crystals 0.5 × 0.5 × 6.25 mm3in size, a wedged lightguide, and a 6 × 6 array of SiPMs 3 × 3 mm2in size. The simulation results showed that the most uniform flood map was achieved when the thickness of the lightguide was 2.35 mm. The quality of the flood map was significantly improved by suppressing the electronics noises using the simple threshold method with a best threshold. The peak-to-valley ratio of flood map improved 25.4% when the algorithm of ICS rejection was applied. An energy resolution (12.96% ± 1.03%) was measured on the prototype scanner constructed with 12 proposed detectors. Lastly, a prototype preclinic PET imager was constructed with 12 optimized detectors. The point source experiment was performed and an excellent spatial resolution (axial: 0.56 mm, tangential: 0.46 mm, radial: 0.42 mm) was achieved with the proposed high-performance PET detectors.

An 8.8 ps RMS Resolution Time-To-Digital Converter Implemented in a 60 nm FPGA with Real-Time Temperature Correction.

This paper presented a non-uniform multiphase (NUMP) time-to-digital converter (TDC) implemented in a field-programmable gate array (FPGA) with real-time automatic temperature compensation. NUMP-TDC is a novel, low-cost, high-performance TDC that has achieved an excellent performance in Altera Cyclone V FPGA. The root mean square (RMS) for the intrinsic timing resolution was 2.3 ps. However, the propagation delays in the delay chain of some FPGAs (for example, the Altera Cyclone 10 LP) vary significantly as the temperature changes. Thus, the timing performances of NUMP-TDCs implemented in those FPGAs are significantly impacted by temperature fluctuations. In this study, a simple method was developed to monitor variations in propagation delays using two registers deployed at both ends of the delay chain and compensate for changes in propagation delay using a look-up table (LUT). When the variations exceeded a certain threshold, the LUT for the delay correction was updated, and a bin-by-bin correction was launched. Using this correction approach, a resolution of 8.8 ps RMS over a wide temperature range (5 °C to 80 °C) had been achieved in a NUMP-TDC implemented in a Cyclone 10 LP FPGA.