Strategies of functionalized GelMA-based bioinks for bone regeneration: Recent advances and future perspectives.

Gelatin methacryloyl (GelMA) hydrogels is a widely used bioink because of its good biological properties and tunable physicochemical properties, which has been widely used in a variety of tissue engineering and tissue regeneration. However, pure GelMA is limited by the weak mechanical strength and the lack of continuous osteogenic induction environment, which is difficult to meet the needs of bone repair. Moreover, GelMA hydrogels are unable to respond to complex stimuli and therefore are unable to adapt to physiological and pathological microenvironments. This review focused on the functionalization strategies of GelMA hydrogel based bioinks for bone regeneration. The synthesis process of GelMA hydrogel was described in details, and various functional methods to meet the requirements of bone regeneration, including mechanical strength, porosity, vascularization, osteogenic differentiation, and immunoregulation for patient specific repair, etc. In addition, the response strategies of smart GelMA-based bioinks to external physical stimulation and internal pathological microenvironment stimulation, as well as the functionalization strategies of GelMA hydrogel to achieve both disease treatment and bone regeneration in the presence of various common diseases (such as inflammation, infection, tumor) are also briefly reviewed. Finally, we emphasized the current challenges and possible exploration directions of GelMA-based bioinks for bone regeneration.

A xonotlite nanofiber bioactive 3D-printed hydrogel scaffold based on osteo-/angiogenesis and osteoimmune microenvironment remodeling accelerates vascularized bone regeneration.

BACKGROUND: Coordination between osteo-/angiogenesis and the osteoimmune microenvironment is essential for effective bone repair with biomaterials. As a highly personalized and precise biomaterial suitable for repairing complex bone defects in clinical practice, it is essential to endow 3D-printed scaffold the above key capabilities. RESULTS: Herein, by introducing xonotlite nanofiber (Ca6(Si6O17) (OH)2, CS) into the 3D-printed silk fibroin/gelatin basal scaffold, a novel bone repair system named SGC was fabricated. It was noted that the incorporation of CS could greatly enhance the chemical and mechanical properties of the scaffold to match the needs of bone regeneration. Besides, benefiting from the addition of CS, SGC scaffolds could accelerate osteo-/angiogenic differentiation of bone mesenchymal stem cells (BMSCs) and meanwhile reprogram macrophages to establish a favorable osteoimmune microenvironment. In vivo experiments further demonstrated that SGC scaffolds could efficiently stimulate bone repair and create a regeneration-friendly osteoimmune microenvironment. Mechanistically, we discovered that SGC scaffolds may achieve immune reprogramming in macrophages through a decrease in the expression of Smad6 and Smad7, both of which participate in the transforming growth factor-ß (TGF-ß) signaling pathway. CONCLUSION: Overall, this study demonstrated the clinical potential of the SGC scaffold due to its favorable pro-osteo-/angiogenic and osteoimmunomodulatory properties. In addition, it is a promising strategy to develop novel bone repair biomaterials by taking osteoinduction and osteoimmune microenvironment remodeling functions into account.

Fabrication and Effect of Strontium-Substituted Calcium Silicate/Silk Fibroin on Bone Regeneration In Vitro and In Vivo.

Achieving rapid osteogenesis and angiogenesis was the key factor for bone regeneration. In the present study, the strontium-substituted calcium silicate (SrCS)/silk fibroin (SF) composite materials have been constructed by combining the different functional component ratios of SrCS (12.5 wt%, 25 wt%) and SF. Then, the effects of SrCS/SF materials on proliferation, osteogenic differentiation, and angiogenic factor secretion of rat bone marrow-derived mesenchymal stromal cells (rBMSCs) were first evaluated in vitro. Moreover, the in vivo effect of osteogenesis was evaluated in a critical-sized rat calvarial defect model. In vitro studies showed that SrCS/SF significantly enhanced the cell proliferation, alkaline phosphatase (ALP) activity, and the expression of osteogenic and angiogenic factors of rBMSCs as compared with the SF and CS/SF, and the optimum proportion ratio was 25 wt%. Besides, the results also showed that CS/SF achieved enhanced effects on rBMSCs as compared with SF. The in vivo results showed that 25 wt% SrCS/SF could obviously promote new bone formation more than SF and CS/SF. The present study revealed that SrCS could significantly promote the osteogenic and angiogenic activities of SF, and SrCS/SF might be a good scaffold material for bone regeneration.

Coaxially Fabricated Dual-Drug Loading Electrospinning Fibrous Mat with Programmed Releasing Behavior to Boost Vascularized Bone Regeneration.

In clinical treatment, the bone regeneration of critical-size defects is desiderated to be solved, and the regeneration of large bone segment defects depends on early vascularization. Therefore, overcoming insufficient vascularization in artificial bone grafts may be a promising strategy for critical-size bone regeneration. Herein, a novel dual-drug programmed releasing electrospinning fibrous mat (EFM) with a deferoxamine (DFO)-loaded shell layer and a dexamethasone (DEX)-loaded core layer is fabricated using coaxial electrospinning technology, considering the temporal sequence of vascularization and bone repair. DFO acts as an angiogenesis promoter and DEX is used as an osteogenesis inducer. The results demonstrate that the early and rapid release of DFO promotes angiogenesis in human umbilical vascular endothelial cells and the sustained release of DEX enhances the osteogenic differentiation of rat bone mesenchymal stem cells. DFO and DEX exert synergetic effects on osteogenic differentiation via the Wnt/ß-catenin signaling pathway, and the dual-drug programmed releasing EFM acquired perfect vascularized bone regeneration ability in a rat calvarial defect model. Overall, the study suggests a low-cost strategy to enhance vascularized bone regeneration by adjusting the behavior of angiogenesis and osteogenesis in time dimension.

A host-coupling bio-nanogenerator for electrically stimulated osteogenesis.

Implantable self-powered generators (ISPGs) have been extensively explored as energy supplies for driving electronics and electrically stimulated therapeutics in vivo. However, some drawbacks arise, such as complicated architectonics, inescapability of wire connection, energy instability, and consumption. In this study, a host-coupling bio-nanogenerator (HCBG) is developed to configure a self-powered regional electrical environment for powerful bone regeneration. An HCBG consists of a porous electret nanofiber mat coupled with interstitial fluid and stimulated objects of the host after implantation, forming a host coupling effect. This bio-nanogenerator not only overcomes the disadvantages of general ISPGs, but also accomplishes both biomechanical energy scavenging and electrical stimulation therapeutics. The enhancement of osteogenesis differentiation of bone marrow mesenchymal stem cells in vitro and bone regeneration in vivo are remarkably achieved. Moreover, osteogenic ability is systematically evaluated by regulating the electrical performance of HCBGs. Osteogenic differentiation is activated by upregulating more cytosolic calcium ion, following to activate the calcium ion-induced osteogenic signal pathway, while applying electrical stimulation. As an implantable medical technology, the HCBG provides an explorative insight to facilitate the development of ISPG-based electrical medical therapeutics.

A novel multifunctional carbon aerogel-coated platform for osteosarcoma therapy and enhanced bone regeneration.

Nowadays, groundbreaking strategies are urgently needed to address drug resistance, osteolysis, bone defects and other predicaments impeding the therapeutic efficacy of osteosarcoma. Among them, photothermal therapy (PTT), using systematically administrated nanoagents, exhibits attractive therapeutic efficacy, yet is powerless in bone defect regeneration. Herein, a novel multifunctional beta-tricalcium phosphate (ß-Ca3(PO4)2, ß-TCP) bioceramic platform-coated with carbon aerogel (CA), which was initially developed for tumor therapy, was fabricated. On account of the desirable photothermal capabilities of CA, sufficient hyperthermia is generated under the irradiation of an 808 nm laser to achieve a thorough ablation of osteosarcoma tumors. Furthermore, CA-coated surfaces provide extra roughness and a higher specific surface area, which promoted the protein recruitment ability and osteogenesis via a fibronectin (FN)-mediated signaling pathway. The photothermal therapeutic efficacy and osteogenesis capability of CA-coated ß-TCP-C suggests a novel approach for the treatment of osteosarcoma and provides provoking inspiration for the prospective bio-application of CA.