RESUMEN
The construction of miniaturized light-emitting diodes (LEDs) with high external quantum efficiency (EQE) at room temperature remains a challenge for on-chip optoelectronics. Here, we demonstrate microsized LEDs fabricated by a dry-transfer van der Waals (vdW) integration method using typical layered Ruddlesden-Popper perovskites (RPPs). A single-crystalline layered RPP nanoflake is used as the active layer and sandwiched between two few-layer graphene contacts, forming van der Waals LEDs (vdWLEDs). Strong electroluminescence (EL) emission with a low turn-on current density of ~20 pA µm-2 and high EQE exceeding 10% is observed at room temperature, which sets the benchmark for the EQE of vdWLEDs ever recorded. Such efficient EL emission is attributed to the inherent multiple quantum well structure and high photoluminescence quantum yield (~35%) of RPPs and a low charge injection barrier of ~0.10 eV facilitated by the Fowler-Nordheim tunneling mechanism. These findings promise a scalable pathway for accessing high-performance miniaturized light sources for on-chip optical optoelectronics.
RESUMEN
A quantum-light source that delivers photons with a high brightness and a high degree of entanglement is fundamental for the development of efficient entanglement-based quantum-key distribution systems. Among all possible candidates, epitaxial quantum dots are currently emerging as one of the brightest sources of highly entangled photons. However, the optimization of both brightness and entanglement currently requires different technologies that are difficult to combine in a scalable manner. In this work, we overcome this challenge by developing a novel device consisting of a quantum dot embedded in a circular Bragg resonator, in turn, integrated onto a micromachined piezoelectric actuator. The resonator engineers the light-matter interaction to empower extraction efficiencies up to 0.69(4). Simultaneously, the actuator manipulates strain fields that tune the quantum dot for the generation of entangled photons with corrected fidelities to a maximally entangled state up to 0.96(1). This hybrid technology has the potential to overcome the limitations of the key rates that plague QD-based entangled sources for entanglement-based quantum key distribution and entanglement-based quantum networks. Supplementary Information: The online version contains supplementary material available at 10.1186/s43593-024-00072-8.
RESUMEN
Transition-metal dichalcogenides (TMDCs), as emerging optoelectronic materials, necessitate the establishment of an experimentally viable system to study their interaction with light. In this study, we propose and analyze a WS2/PMMA/Ag planar Fabry-Perot (F-P) cavity, enabling the direct experimental measurement of WS2 absorbance. By optimizing the structure, the absorbance of A exciton of WS2 up to 0.546 can be experimentally achieved, which matches well with the theoretical calculations. Through temperature and thermal expansion strain induced by temperature, the absorbance of the A exciton can be tuned in situ. Furthermore, temperature-dependent photocurrent measurements confirmed the consistent absorbance of the A exciton under varying temperatures. This WS2/PMMA/Ag planar structure provides a straightforward and practical platform for investigating light interaction in TMDCs, laying a solid foundation for future developments of TMDC-based optoelectronic devices.
RESUMEN
Monolayer tungsten disulfide (WS2) is a highly promising material for silicon photonics. Thus, the WS2/Si interface plays a very important role due to the interfacial complex effects and abundant states. Among them, the effect of charge transfer on exciton dynamics and the optoelectronic property is determined by the dielectric function, which is very crucial for the performance of optoelectronic devices. However, research on the exciton dynamics or the transient dielectric function of WS2 in such WS2/Si junctions is still rare. In this work, both the transient dielectric function and charge transfer of WS2/Si heterojunctions are analyzed based on the transient reflectance spectra measured by the pump-probe spectrometer. The dynamic processes of the A exciton, affected by charge transfer within the WS2/Si heterojunction, are interpreted. Moreover, the transient dielectric function of WS2 is quantitatively analyzed. The dielectric function of WS2 exhibits a notable 19% change, persisting for more than 180 ps within the WS2/Si heterojunction. These findings can pave the way for the advancement of silicon photonic devices based on WS2.
RESUMEN
Monolayer transition metal dichalcogenides (TMDCs) with direct bandgaps are considered promising candidates for building light-emitting diodes (LEDs). One crucial indicator of their performance is the brightness of electroluminescence (EL). In this study, we fabricate WS2-based LEDs that make full use of the assistance of effective transient-mode charge injection. By introducing self-assembled silver nanoparticles (NPs) on top of the LED, the extraction efficiency is significantly improved, with a 2.9-fold EL enhancement observed in the experiment. Full-wave simulations further confirm that the improvement comes from the scattering capability of silver NPs, with results qualitatively fitting the experiment. This approach, with its compatibility with van der Waals heterostructures, can be further promoted to enhance the brightness of 2D monolayer TMDC-based LEDs.
RESUMEN
Entangled photon pairs are essential for a multitude of quantum photonic applications. To date, the best performing solid-state quantum emitters of entangled photons are semiconductor quantum dots operated around liquid-helium temperatures. To favor the widespread deployment of these sources, it is important to explore and understand their behavior at temperatures accessible with compact Stirling coolers. Here we study the polarization entanglement among photon pairs from the biexciton-exciton cascade in GaAs quantum dots at temperatures up to â¼65 K. We observe entanglement degradation accompanied by changes in decay dynamics, which we ascribe to thermal population and depopulation of hot and dark states in addition to the four levels relevant for photon pair generation. Detailed calculations considering the presence and characteristics of the additional states and phonon-assisted transitions support the interpretation. We expect these results to guide the optimization of quantum dots as sources of highly entangled photons at elevated temperatures.
RESUMEN
The optical selection rules in epitaxial quantum dots are strongly influenced by the orientation of their natural quantization axis, which is usually parallel to the growth direction. This configuration is well suited for vertically emitting devices, but not for planar photonic circuits because of the poorly controlled orientation of the transition dipoles in the growth plane. Here we show that the quantization axis of gallium arsenide dots can be flipped into the growth plane via moderate in-plane uniaxial stress. By using piezoelectric strain-actuators featuring strain amplification, we study the evolution of the selection rules and excitonic fine structure in a regime, in which quantum confinement can be regarded as a perturbation compared to strain in determining the symmetry-properties of the system. The experimental and computational results suggest that uniaxial stress may be the right tool to obtain quantum-light sources with ideally oriented transition dipoles and enhanced oscillator strengths for integrated quantum photonics.
