One-Pot Biocatalytic Route from Alkanes to α,ω-Diamines by Whole-Cell Consortia of Engineered Yarrowia lipolytica and Escherichia coli.

Metabolically engineered microbial consortia can contribute as a promising production platform for the supply of polyamide monomers. To date, the biosynthesis of long-chain α,ω-diamines from n-alkanes is challenging because of the inert nature of n-alkanes and the complexity of the overall synthesis pathway. We combined an engineered Yarrowia lipolytica module with Escherichia coli modules to obtain a mixed strain microbial consortium that could catalyze an efficient biotransformation of n-alkanes into corresponding α,ω-diamines. The engineered Y. lipolytica strain was constructed (YALI10) wherein the two genes responsible for ß-oxidation and the five genes responsible for the overoxidation of fatty aldehydes were deleted. This newly constructed YALI10 strain expressing transaminase (TA) could produce 0.2 mM 1,12-dodecanediamine (40.1 mg/L) from 10 mM n-dodecane. The microbial consortia comprising engineered Y. lipolytica strains for the oxidation of n-alkanes (OM) and an E. coli amination module (AM) expressing an aldehyde reductase (AHR) and transaminase (TA) improved the production of 1,12-diamine up to 1.95 mM (391 mg/L) from 10 mM n-dodecane. Finally, combining the E. coli reduction module (RM) expressing a carboxylic acid reductase (CAR) and an sfp phosphopantetheinyl transferase with OM and AM further improved the production of 1,12-diamine by catalyzing the reduction of undesired 1,12-diacids into 1,12-diols, which further undergo amination to give 1,12-diamine as the target product. This newly constructed mixed strain consortium comprising three modules in one pot gave 4.1 mM (41%; 816 mg/L) 1,12-diaminododecane from 10 mM n-dodecane. The whole-cell consortia reported herein present an elegant "greener" alternative for the biosynthesis of various α,ω-diamines (C8, C10, C12, and C14) from corresponding n-alkanes.

Dual-function transaminases with hybrid nanoflower for the production of value-added chemicals from biobased levulinic acid.

The U.S. Department of Energy has listed levulinic acid (LA) as one of the top 12 compounds derived from biomass. LA has gained much attention owing to its conversion into enantiopure 4-aminopentanoic acid through an amination reaction. Herein, we developed a coupled-enzyme recyclable cascade employing two transaminases (TAs) for the synthesis of (S)-4-aminopentanoic acid. TAs were first utilized to convert LA into (S)-4-aminopentanoic acid using (S)-α-Methylbenzylamine [(S)-α-MBA] as an amino donor. The deaminated (S)-α-MBA i.e., acetophenone was recycled back using a second TAs while using isopropyl amine (IPA) amino donor to generate easily removable acetone. Enzymatic reactions were carried out using different systems, with conversions ranging from 30% to 80%. Furthermore, the hybrid nanoflowers (HNF) of the fusion protein were constructed which afforded complete biocatalytic conversion of LA to the desired (S)-4-aminopentanoic acid. The created HNF demonstrated storage stability for over a month and can be reused for up to 7 sequential cycles. A preparative scale reaction (100 mL) achieved the complete conversion with an isolated yield of 62%. Furthermore, the applicability of this recycling system was tested with different ß-keto ester substrates, wherein 18%-48% of corresponding ß-amino acids were synthesized. Finally, this recycling system was applied for the biosynthesis of pharmaceutical important drug sitagliptin intermediate ((R)-3-amino-4-(2,4,5-triflurophenyl) butanoic acid) with an excellent conversion 82%.

Non-Canonical Amino Acid-Based Engineering of (R)-Amine Transaminase.

Non-canonical amino acids (ncAAs) have been utilized as an invaluable tool for modulating the active site of the enzymes, probing the complex enzyme mechanisms, improving catalytic activity, and designing new to nature enzymes. Here, we report site-specific incorporation of p-benzoyl phenylalanine (pBpA) to engineer (R)-amine transaminase previously created from d-amino acid aminotransferase scaffold. Replacement of the single Phe88 residue at the active site with pBpA exhibits a significant 15-fold and 8-fold enhancement in activity for 1-phenylpropan-1-amine and benzaldehyde, respectively. Reshaping of the enzyme's active site afforded an another variant F86A/F88pBpA, with 30% higher thermostability at 55°C without affecting parent enzyme activity. Moreover, various racemic amines were successfully resolved by transaminase variants into (S)-amines with excellent conversions (∼50%) and enantiomeric excess (>99%) using pyruvate as an amino acceptor. Additionally, kinetic resolution of the 1-phenylpropan-1-amine was performed using benzaldehyde as an amino acceptor, which is cheaper than pyruvate. Our results highlight the utility of ncAAs for designing enzymes with enhanced functionality beyond the limit of 20 canonical amino acids.

Light-Triggered In Situ Biosynthesis of Artificial Melanin for Skin Protection.

Tyrosinase-mediated melanin synthesis is an essential biological process that can protect skin from UV radiation and radical species. This work reports on in situ biosynthesis of artificial melanin in native skin using photoactivatable tyrosinase (PaTy). The I41Y mutant of Streptomyces avermitilis tyrosinase (SaTy) shows enzymatic activity comparable to that of wild-type SaTy. This Y41 is replaced with photocleavable o-nitrobenzyl tyrosine (ONBY) using the introduction of amber codon and ONBY-tRNA synthetase/tRNA pairs. The ONBY efficiently blocks the active site and tyrosinase activity is rapidly recovered by the photo-cleavage of ONBY. The activated PaTy successfully oxidizes L-tyrosine and tyramine-conjugated hyaluronic acid (HA_T) to synthesize melanin particles and hydrogel, respectively. To produce artificial melanin in living tissues, PaTy is encapsulated into lipid nanoparticles as an artificial melanosome. Using liposomes containing PaTy (PaTy_Lip), PaTy is transdermally delivered into ex vivo porcine skin and in vivo mouse skin tissues, thus achieving the in situ biosynthesis of artificial melanin for skin tissue protection under UV irradiation. The results of this study demonstrate that this biomimetic system can recapitulate the biosynthetic analogs of naturally occurring melanin. It should therefore be considered to be a promising strategy for producing protective biological molecules within living systems for tissue protection.

Chemical modification of enzymes to improve biocatalytic performance.

Improvement in intrinsic enzymatic features is in many instances a prerequisite for the scalable applicability of many industrially important biocatalysts. To this end, various strategies of chemical modification of enzymes are maturing and now considered as a distinct way to improve biocatalytic properties. Traditional chemical modification methods utilize reactivities of amine, carboxylic, thiol and other side chains originating from canonical amino acids. On the other hand, noncanonical amino acid- mediated 'click' (bioorthogoal) chemistry and dehydroalanine (Dha)-mediated modifications have emerged as an alternate and promising ways to modify enzymes for functional enhancement. This review discusses the applications of various chemical modification tools that have been directed towards the improvement of functional properties and/or stability of diverse array of biocatalysts.

Synthesis of Sitagliptin Intermediate by a Multi-Enzymatic Cascade System Using Lipase and Transaminase With Benzylamine as an Amino Donor.

Herein, we report the development of a multi-enzyme cascade using transaminase (TA), esterase, aldehyde reductase (AHR), and formate dehydrogenase (FDH), using benzylamine as an amino donor to synthesize the industrially important compound sitagliptin intermediate. A panel of 16 TAs was screened using ethyl 3-oxo-4-(2,4,5-trifluorophenyl) butanoate as a substrate (1). Amongst these enzymes, TA from Roseomonas deserti (TARO) was found to be the most suitable, showing the highest activity towards benzylamine (∼70%). The inhibitory effect of benzaldehyde was resolved by using AHR from Synechocystis sp. and FDH from Pseudomonas sp., which catalyzed the conversion of benzaldehyde to benzyl alcohol at the expense of NAD(P)H. Reaction parameters, such as pH, buffer system, and concentration of amino donor, were optimized. A single whole-cell system was developed for co-expressing TARO and esterase, and the promoter engineering strategy was adopted to control the expression level of each biocatalyst. The whole-cell reactions were performed with varying substrate concentrations (10-100 mM), resulting in excellent conversions (ranging from 72 to 91%) into the desired product. Finally, the applicability of this cascade was highlighted on Gram scale, indicating production of 70% of the sitagliptin intermediate with 61% isolated yield. The protocol reported herein may be considered an alternative to existing methods with respect to the use of cheaper amine donors as well as improved synthesis of (R) and (S) enantiomers with the use of non-chiral amino donors.

Promoter engineering-mediated Tuning of esterase and transaminase expression for the chemoenzymatic synthesis of sitagliptin phosphate at the kilogram-scale.

Here, we report a bienzymatic cascade to produce ß-amino acids as an intermediate for the synthesis of the leading oral antidiabetic drug, sitagliptin. A whole-cell biotransformation using recombinant Escherichia coli coexpressing a esterase and transaminase were developed, wherein the desired expression level of each enzyme was achieved by promotor engineering. The small-scale reactions (30 ml) performed under optimized conditions at varying amounts of substrate (100-300 mM) resulted in excellent conversions of 82%-95% for the desired product. Finally, a kilogram-scale enzymatic reaction (250 mM substrate, 220 L) was carried out to produce ß-amino acid (229 mM). Sitagliptin phosphate was chemically synthesized from ß-amino acids with 82% yield and > 99% purity.

Recent Advances in Biocatalysis with Chemical Modification and Expanded Amino Acid Alphabet.

The two main strategies for enzyme engineering, directed evolution and rational design, have found widespread applications in improving the intrinsic activities of proteins. Although numerous advances have been achieved using these ground-breaking methods, the limited chemical diversity of the biopolymers, restricted to the 20 canonical amino acids, hampers creation of novel enzymes that Nature has never made thus far. To address this, much research has been devoted to expanding the protein sequence space via chemical modifications and/or incorporation of noncanonical amino acids (ncAAs). This review provides a balanced discussion and critical evaluation of the applications, recent advances, and technical breakthroughs in biocatalysis for three approaches: (i) chemical modification of cAAs, (ii) incorporation of ncAAs, and (iii) chemical modification of incorporated ncAAs. Furthermore, the applications of these approaches and the result on the functional properties and mechanistic study of the enzymes are extensively reviewed. We also discuss the design of artificial enzymes and directed evolution strategies for enzymes with ncAAs incorporated. Finally, we discuss the current challenges and future perspectives for biocatalysis using the expanded amino acid alphabet.

An Integrated Cofactor/Co-Product Recycling Cascade for the Biosynthesis of Nylon Monomers from Cycloalkylamines.

We report a highly atom-efficient integrated cofactor/co-product recycling cascade employing cycloalkylamines as multifaceted starting materials for the synthesis of nylon building blocks. Reactions using E. coli whole cells as well as purified enzymes produced excellent conversions ranging from >80 and 95 % into desired ω-amino acids, respectively with varying substrate concentrations. The applicability of this tandem biocatalytic cascade was demonstrated to produce the corresponding lactams by employing engineered biocatalysts. For instance, ϵ-caprolactam, a valuable polymer building block was synthesized with 75 % conversion from 10 mM cyclohexylamine by employing whole-cell biocatalysts. This cascade could be an alternative for bio-based production of ω-amino acids and corresponding lactam compounds.

Discovery of Novel Pseudomonas putida Flavin-Binding Fluorescent Protein Variants with Significantly Improved Quantum Yield.

Oxygen-independent, flavin-binding fluorescent proteins (FbFPs) are emerging as alternatives to green fluorescent protein (GFP), which has limited applicability in studying anaerobic microorganisms, such as human gastrointestinal bacteria, which grow in oxygen-deficient environments. However, the utility of these FbFPs has been compromised because of their poor fluorescence emission. To overcome this limitation, we have employed a high-throughput library screening strategy and engineered an FbFP derived from Pseudomonas putida (SB2) for enhanced quantum yield. Of the resulting SB2 variants, KOFP-7 exhibited a significantly improved quantum yield (0.61) compared to other reported engineered FbFPs, which was even higher than that of enhanced GFP (EGFP, 0.60), with significantly enhanced tolerance against a strong reducing agent.

In vivo biosynthesis of tyrosine analogs and their concurrent incorporation into a residue-specific manner for enzyme engineering.

Herein we report the development of an efficient cellular system for the in vivo biosynthesis of Tyr-analogs and their concurrent incorporation into target proteins by the residue-specific approach. This system makes use of common phenol derivatives and the tyrosine phenol lyase machinery to create various tyrosine analogues that impart desired properties on the target proteins. Biosynthesized 2-fluorotyrosine was incorporated into three industrially important enzymes which resulted in enhanced thermostability.

Production of 12-hydroxy dodecanoic acid methyl ester using a signal peptide sequence-optimized transporter AlkL and a novel monooxygenase.

In this study, a signal peptide of AlkL was replaced with other signal peptides to improve the soluble expression and thereby facilitate the transport of dodecanoic acid methyl ester (DAME) substrate into the E. coli. Consequently, AlkL with signal peptide FadL (AlkLf) showed higher transport activity toward DAME. Furthermore, the promoter optimization for the efficient heterologous expression of the transporter AlkLf and alkane monooxygenase (AlkBGT) system was conducted and resulted in increased ω-oxygenation activity of AlkBGT system. Moreover, bioinformatic studies led to the identification of novel monooxygenase from Pseudomonas pelagia (Pel), which exhibited 20% higher activity towards DAME as substrate compared to AlkB. Finally, the construction of a chimeric transporter and the expression of newly identified monooxygenase enabled the production of 44.8 ±â€¯7.5 mM of 12-hydroxy dodecanoic acid methyl ester (HADME) and 31.8 ±â€¯1.7 mM of dodecanedioic acid monomethyl ester (DDAME) in a two-phase reaction system.

Structural basis of substrate recognition by a novel thermostable (S)-enantioselective ω-transaminase from Thermomicrobium roseum.

Transaminases catalyze the reversible transfer reaction of an amino group between a primary amine and an α-keto acid, utilizing pyridoxal 5'-phosphate as a cofactor. ω-transaminases (ωTAs) recognize an amino group linked to a non-α carbon of amine substrates. Recently, a novel (S)-enantioselective ωTA from Thermomicrobium roseum (Tr-ωTA) was identified and its enzymatic activity reported. However, the detailed mechanism of (S)-enantioselective substrate recognition remained unclear. In this study, we determined the crystal structure of Tr-ωTA at 1.8 Å resolution to elucidate the mechanism underlying Tr-ωTA substrate (S)-enantioselectivity. A structural analysis of Tr-ωTA along with molecular docking simulations revealed that two pockets at the active site tightly restrict the size and orientation of functional groups of substrate candidates. Based on the structural information and docking simulation results, we propose a comprehensive catalytic mechanism of Tr-ωTA. The present study thus provides structural and functional insights into the (S)-enantioselectivity of Tr-ωTA.

Enzymatic synthesis of sitagliptin intermediate using a novel ω-transaminase.

Enantiopure ß-amino acids are essential precursors of various pharmaceuticals, agrochemicals and other industrially important chemicals. In this study, we selected sixteen potential ω-Transaminases (ω-TAs) by BLAST and phylogenetic tree analysis. These ω-TAs were cloned, purified and tested for their reactivity for the synthesis of model ß-amino acid (R)-3-amino-4-(2,4,5-triflurophenyl) butanoic acid [3-ATfBA], a key precursor for sitagliptin. In an enzymatic cascade, lipase converted ß-ketoester substrate to ß-keto acid, which was subsequently aminated by the selected ω-TA to its corresponding ß-amino acid. A potent enzyme from Ilumatobacter coccineus (ω-TAIC) was identified for the production of 3-ATfBA. The pH dependency of the product inhibition suggested that lowering the reaction pH to 7.0 can circumvent the inhibition of ω-TAIC by 3-ATfBA and about 92.3% conversion of 100 mM ß-keto ester substrate could be achieved. The applicability of this enzymatic system was further evaluated at the scale of 140 mM, wherein 3-ATfBA was generated with excellent conversion (81.9%) and enantioselectivity (99% ee). Furthermore, ω-TAIC was successfully used for the synthesis of various ß-amino acids from their corresponding ß-keto ester substrates.

Structural dynamics of the transaminase active site revealed by the crystal structure of a co-factor free omega-transaminase from Vibrio fluvialis JS17.

Omega (ω)-transaminase catalyzes the transfer of an amino group from a non-α position amino acid, or an amine compound with no carboxylic group, to an amino acceptor, and has been studied intensively because of its high potential utility in industry and pharmatheutics. The ω-transaminase from Vibrio fluvialis JS17 (Vfat) is an amine:pyruvate transaminase capable of the stereo-selective transamination of arylic chiral amines. This enzyme exhibits extraordinary enantio-selectivity, and has a rapid reaction rate for chiral amine substrates. In this study, we report the crystal structure of the apo form of Vfat. The overall structure of Vfat was typical of other class III aminotransferase exhibiting an N-terminal helical domain, a small domain, and a large domain. Interestingly, the two subunits of apo Vfat in the asymmetric unit had different structures. A comparison of the overall structure to other transaminases, revealed that the structures of the N-terminal helical domain and the large domain can be affected by cofactor occupancy, but the structural rearrangement in these regions can occur independently.

Biosynthesis of the Nylon 12 Monomer, ω-Aminododecanoic Acid with Novel CYP153A, AlkJ, and ω-TA Enzymes.

Bioplastics are derived from renewable biomass sources, such as vegetable oils, cellulose, and starches. An important and high-performance member of the bioplastic family is Nylon 12. The biosynthesis of ω-amino dodecanoic acid (ω-AmDDA), the monomer of Nylon 12 from vegetable oil derivatives is considered as an alternative to petroleum-based monomer synthesis. In this study, for the production of ω-AmDDA from dodecanoic acid (DDA), the cascade of novel P450 (CYP153A), alcohol dehydrogenase (AlkJ), and ω-transaminase (ω-TA) is developed. The regioselective ω-hydroxylation of 1 mM DDA with near complete conversion (>99%) is achieved using a whole-cell biocatalyst co-expressing CYP153A, ferredoxin reductase and ferredoxin. When the consecutive biotransformation of ω-hydroxy dodecanoic acid (ω-OHDDA) is carried out using a whole-cell biocatalyst co-expressing AlkJ and ω-TA, 1.8 mM ω-OHDDA is converted into ω-AmDDA with 87% conversion in 3 h. Finally, when a one-pot reaction is carried out with 2 mM DDA using both whole-cell systems, 0.6 mM ω-AmDDA is produced after a 5 h reaction. The results demonstrated the scope of the potential cascade reaction of novel CYP153A, AlkJ, and ω-TA for the production of industrially important bioplastic monomers, amino fatty acids, from FFAs.

Manganese and cobalt recovery by surface display of metal binding peptide on various loops of OmpC in Escherichia coli.

In a cell-surface display (CSD) system, successful display of a protein or peptide is highly dependent on the anchoring motif and the position of the display in that anchoring motif. In this study, a recombinant bacterial CSD system for manganese (Mn) and cobalt (Co) recovery was developed by employing OmpC as an anchoring motif on three different external loops. A portion of Cap43 protein (TRSRSHTSEG)3 was employed as a manganese and cobalt binding peptide (MCBP), which was fused with OmpC at three different external loops. The fusions were made at the loop 2 [fusion protein-2 (FP2)], loop 6 (FP6), and loop 8 (FP8) of OmpC, respectively. The efficacy of the three recombinant strains in the recovery of Mn and Co was evaluated by varying the concentration of the respective metal. Molecular modeling studies showed that the short trimeric repeats of peptide probably form a secondary structure with OmpC, thereby giving rise to a difference in metal recovery among the three recombinant strains. Among the three recombinant strains, FP6 showed increased metal recovery with both Mn and Co, at 1235.14 (1 mM) and 379.68 (0.2 mM) µmol/g dry cell weight (DCW), respectively.

Simultaneously Enhancing the Stability and Catalytic Activity of Multimeric Lysine Decarboxylase CadA by Engineering Interface Regions for Enzymatic Production of Cadaverine at High Concentration of Lysine.

Cadaverine (1,5-diaminopentane) is a major source of many industrial polyamides such as nylon and chelating agents. Currently, cadaverine is produced by the microbial fermentation of glucose to lysine, which is then decarboxylated by lysine decarboxylase (CadA). However, utilizing CadA for cadaverine production causes enzyme instability. In order to stabilize the CadA homo-decamer structure for in vitro decarboxylation reaction, mutants are designed. Of the four disulfide bond mutants in the multimeric interfacial region, B1 (F14C/K44C) showed a 216-folds increase in the half-life of CadA at 60 °C. On top of B1, another round of mutant screening is performed around F14C and K44C to generate B1/L7M/N8G, which is then examined for cadaverine production (2M lysine and 10% v/v of cell-extract at 50 °C). The reaction pH increased from 4.9 to 8.3, and the final titer of the mutant is 157 g L-1 , that is, 76.7% conversion yield in 9.5 h, whereas the wild-type gave 119 g L-1 , that is, 58.2% conversion yield in 9.5 h.

Comparative analysis of polyspecificity of the endogenous tRNA synthetase of different expression host towards photocrosslinking amino acids using an in silico approach.

Photo-induced covalent crosslinking has emerged as the powerful strategy for analyzing and characterizing the protein-protein interaction and mapping protein 3D conformations. In the last decades, a number of photocrosslinking amino acids have been reported but only a few have been efficiently utilized for photocrosslinking purposes. Recently, incorporation of diazirine containing photoactivatable analogs such as photo-methionine, photo-leucine, photo-isoleucine and photo-lysine into target proteins were accomplished in live cells (Human A549cells, HEK 293) by depleting corresponding natural amino acid and supplementing these analogs in the medium. Likewise, incorporation of photo-methionine and photo-leucine is also reported in E. coli. Incorporation of these unnatural amino acids were demonstrated only in a limited number species, thereby conventional methods have been utilized for the protein-protein interaction study in other species. With this in mind, we studied in silico analysis of polyspecificity of four endogenous tRNA synthetases (LeuRS, IleRS, MetRS, and LysRS) from six different species such as Escherichia coli, Pseudomonas fluorescens, Corynebacterium glutamicum, Saccharomyces cerevisiae, Aspergillus oryzae and Homo sapiens towards its photocrosslinking amino acids. In addition, here we describe the active site similarity of different protein bio-factories. Based on the active site similarity and similar binding mode, we predicted that the endogenous tRNA synthetases of all the species are reactive to corresponding photoactivatable analogs. This is the first in silico study to demonstrate that the photocrosslinking unnatural amino acids are recognized by the endogenous tRNA synthetases of different protein expression biofactories.

Engineering an FMN-based iLOV protein for the detection of arsenic ions.

Over the past few decades, genetically encoded fluorescent proteins have been widely used as efficient probes to explore and investigate the roles of metal ions in biological processes. The discovery of small FMN-based fluorescent proteins, such as iLOV and FbFP, has enabled researchers to exploit these fluorescent reporter proteins for metal-sensing applications. In this study, we report the inherent binding properties of iLOV towards arsenic ions. The fluorescence quenching of iLOV was linearly related to the concentration of arsenic ions, and engineered proteins showed better sensitivity than the wild-type protein. Engineering key residues around the chromophore converted the iLOV protein into a highly sensitive sensor for As3+ ions. iLOVN468S exhibited an improved binding affinity with a dissociation constant of 1.5 µM. Furthermore, the circular dichroism spectra indicated that the fluorescence quenching mechanism might be related to arsenic-protein complex formation. Thus, the reagentless sensing of arsenic can potentially be exploited to determine intracellular or environmental arsenic using a genetically encoded biosensing approach.