RESUMEN
The slow reaction kinetics and severe shuttle effect of lithium polysulfide make Li-S battery electrochemical performance difficult to meet the demands of large electronic devices such as electric vehicles. Based on this, an electrocatalyst constructed by metal phase material (MoS2) and semiconductor phase material (SnS2) with ohmic contact is designed for inhibiting the dissolution of lithium polysulfide with improving the reaction kinetics. According to the density-functional theory calculations, it is found that the heterostructured samples with ohmic contacts can effectively reduce the reaction-free energy of lithium polysulfide to accelerate the sulfur redox reaction, in addition to the excellent electron conduction to reduce the overall activation energy. The metallic sulfide can add more sulfophilic sites to promote the capture of polysulfide. Thanks to the ohmic contact design, the carbon nanotube-MoS2-SnS2 achieved a specific capacity of 1437.2 mAh g-1 at 0.1 C current density and 805.5 mAh g-1 after 500 cycles at 1 C current density and is also tested as a pouch cell, which proves to be valuable for practical applications. This work provides a new idea for designing an advanced and efficient polysulfide catalyst based on ohmic contact.
RESUMEN
Noble gas xenon (Xe) is an excellent anesthetic gas, but its rarity, high cost and constrained production prohibits wide use in medicine. Here, we have developed a closed-circuit anesthetic Xe recovery and reusage process with highly effective CO2-specific adsorbent CUPMOF-5 that is promising to solve the anesthetic Xe supply problem. CUPMOF-5 possesses spacious cage cavities interconnected in four directions by confinement throat apertures of ~3.4â Å, which makes it an ideal molecular sieving of CO2 from Xe, O2, N2 with the benchmark selectivity and high uptake capacity of CO2. In situ single-crystal X-ray diffraction (SCXRD) and computational simulation solidly revealed the vital sieving role of the confined throat and the sorbent-sorbate induced-fit strengthening binding interaction to CO2. CUPMOF-5 can remove 5 % CO2 even from actual moist exhaled anesthetic gases, and achieves the highest Xe recovery rate (99.8 %) so far, as verified by breakthrough experiments. This endows CUPMOF-5 great potential for the on-line CO2 removal and Xe recovery from anesthetic closed-circuits.
RESUMEN
In order to take advantage of the distinct reversible multielectron transfer properties of polyoxometalates (POMs) and increase the electron density at the active sites during the electrochemical reduction of CO2 (CO2RR), a range of transition metal-doped polyoxometalates (TMSPOMs) was entrapped within the porphyrin-based framework of PCN-224 via an encapsulation method, known as TMSPOMs@PCN-224 (TMSPOMs = [XW11O39MII(H2O)]n-, [XW11O40VIV]n-, M = CoII, MnII; X = Si, n = 6; X = P, n = 5). The central elements (Si, P) and the incorporated transition metals (VIV, CoII, and MnII) both play a role in adjusting the electronic structure and electron transfer during the CO2RR process. Remarkably, the composite material with cobalt substitution displayed significantly improved performance. Through fine-tuning the POM loading, the electrocatalytic activity was optimized, leading to an impressive Faradaic efficiency for CO production (FECO) of 89.9% for SiW11Co@PCN-224, a significant improvement compared to the 12.1% FECO of PCN-224. Furthermore, the electrochemical stability of this catalyst was demonstrated over 20 h. Comparative analyses involving six composite materials indicated a relationship between the negative charge of the polyanions and their ability to facilitate effective electron transfer, ultimately enhancing the catalyst's performance. Meanwhile, these findings were supported by density functional theory (DFT) calculations.
RESUMEN
Phosphate-based electrolyte propels the advanced battery system with high safety. Unfortunately, restricted by poor electrochemical stability, it is difficult to be compatible with advanced lithium metal anodes and Ni-rich cathodes. To alleviate these issues, the study has developed a phosphate-based localized high-concentration electrolyte with a nitrate-driven solvation structure, and the nitrate-derived N-rich inorganic interface shows excellent performance in stabilizing the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode interface and modulating the lithium deposition morphology on the anode. The results show that the Li|| NCM811 cell has exceptional long-cycle stability of >80% capacity retention after 800 cycles at 4.3 V, 1 C. A more prominent capacity retention rate of 93.3% after 200 cycles can be reached with the high voltage of 4.5 V. While being compatible with the phosphate-based electrolyte with good flame retardancy and the good electrochemical stability of Ni-rich lithium metal battery (LMBs) systems, the present work expands the construction of anion-rich solvation structures, which is expected to promote the development of the high-performance LMBs with safety.
RESUMEN
The localized high-concentration electrolyte (LHCE) propels the advanced high-voltage battery system. Sulfone-based LHCE is a transformative direction compatible with high energy density and high safety. In this work, the application of lithium bis(trifluoromethanesulphonyl)imide and lithium bis(fluorosulfonyl)imide (LiFSI) in the LHCE system constructed from sulfolane and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) is investigated. The addition of diluent causes an increase of contact ion pairs and ionic aggregates in the solvation cluster and an acceptable quantity of free solvent molecules. A small amount of LiFSI as an additive can synergistically decompose with TTE on the cathode and participate in the construction of both electrode interfaces. The designed electrolyte helps the Ni-rich system to cycle firmly at a high voltage of 4.5 V. Even with high mass load and lean electrolyte, it can keep a reversible specific capacity of 91.5% after 50 cycles. The constructed sulfone-based electrolyte system exhibits excellent thermal stability far beyond the commercial electrolytes. Further exploration of in-situ gelation has led to a quick conversion of the designed liquid electrolyte to the gel state, accompanied by preserved stability, which provides a direction for the synergistic development of LHCE with gel electrolytes.
RESUMEN
OBJECTIVES: Ranunculus L. genus contains 413 species, and it is the biggest genus in the family Ranunculaceae Juss. This review is to provide botanical characteristics, traditional uses, phytochemistry, pharmacology, toxicity, and pharmaceutical preparations of the genus Ranunculus. KEY FINDINGS: The genus Ranunculus contains flavonoids, organic acids, coumarins, lactones, glycosides, sterols, polysaccharides, and trace elements. These chemical constituents complement the pharmacological actions and work together to exert anti-inflammatory, anticancer, antitubercular, antibacterial, antimalarial, etc. Those traditional Chinese medicine characteristics, like clearing away heat and detoxification, make this genus significant in ethnic medicine. The progress in research and the development of various pharmaceutical preparations made it appear in epidemiological and clinical studies. SUMMARY: The genus Ranunculus has attracted the attention of experts and scholars in many fields due to its unique advantages. However, there are many species that are not scientifically investigated. The toxicity issues are also a huge concern. Fortunately, the toxicity can be overcome via special processes like drying or heating and by choosing a safe extraction solvent, such as water thus ensuring the safety of medication. Pharmaceutical preparations containing the plants from Ranunculus have gratifying clinical value, but they are not promoted sufficiently. Therefore, further research should be carried out to promote the genus for its health benefits to humans.
Asunto(s)
Ranunculus , Ranunculus/química , Humanos , Fitoquímicos/farmacología , Fitoquímicos/toxicidad , Fitoquímicos/aislamiento & purificación , Animales , Medicina Tradicional China/métodos , Asia , Fitoterapia , Medicamentos Herbarios Chinos/farmacología , Medicamentos Herbarios Chinos/química , Medicamentos Herbarios Chinos/toxicidad , Extractos Vegetales/farmacología , Extractos Vegetales/toxicidad , Extractos Vegetales/química , EtnofarmacologíaRESUMEN
Capturing CO2 using clamshell/eggshell-derived CaO adsorbent can not only reduce carbon emissions but also alleviate the impact of trash on the environment. However, organic acid was usually used, high-temperature calcination was often performed, and CO2 was inevitably released during preparing CaO adsorbents from shell wastes. In this work, CaO-based CO2 adsorbent was greenly prepared by calcium-induced hydrogenation of clamshell and eggshell wastes in one pot at room/moderate temperature. CO2 adsorption experiments were performed in a thermogravimetric analyzer (TGA). The adsorption performance of the adsorbents obtained from the mechanochemical reaction (BM-C/E-CaO) was superior to that of the adsorbents obtained from the thermochemical reaction (Cal-C/E-CaO). The CO2 adsorption capacity of BM-C-CaO at 650 °C is up to 36.82 wt%, but the adsorption decay rate of the sample after 20 carbonation/calcination cycles is only 30.17%. This study offers an alternative energy-saving method for greenly preparing CaO-based adsorbent from shell wastes.
Asunto(s)
Dióxido de Carbono , Tecnología Química Verde , Eliminación de Residuos , Tecnología Química Verde/métodos , Dióxido de Carbono/análisis , Dióxido de Carbono/química , Hidrogenación , Temperatura , Exoesqueleto/química , Cáscara de Huevo/química , Eliminación de Residuos/métodos , AdsorciónRESUMEN
Metal-organic framework materials can be converted into carbon-based nanoporous materials by pyrolysis, which have a wide range of applications in energy storage. Here, we design special interface engineering to combine the carbon skeleton and nitrogen-doped carbon nanotubes (CNTs) with the transition metal compounds (TMCs) well, which mitigates the bulk effect of the TMCs and improves the conductivity of the electrodes. Zeolitic imidazolate framework-67 is used as a precursor to form a carbon skeleton and a large number of nitrogen-doped CNTs by pyrolysis followed by the in situ formation of Co3O4 and CoS2, and finally, Co3O4@CNTs and CoS2@CNTs are synthesized. The obtained anode electrodes exhibit a long cycle life and high-rate properties. In lithium-ion batteries (LIBs), Co3O4@CNTs have a high capacity of 581 mAh g-1 at a high current of 5 A g-1, and their reversible capacity is still 1037.6 mAh g-1 after 200 cycles at 1 A g-1. In sodium-ion batteries (SIBs), CoS2@CNTs have a capacity of 859.9 mAh g-1 at 0.1 A g-1 and can be retained at 801.2 mAh g-1 after 50 cycles. The unique interface engineering and excellent electrochemical properties make them ideal anode materials for high-rate, long-life LIBs and SIBs.
RESUMEN
Compared to the currently widely used propane dehydrogenation process for propylene production, propane oxidative dehydrogenation (ODHP) offers the advantage of no thermodynamic limitations and lower energy consumption. However, a major challenge in ODHP is the occurrence of undesired over-oxidation reactions of propylene, which reduce selectivity and hinder industrialization. MOFs possess a large number of metal sites that can serve as catalytic centers, which facilitates the easier access of reactants to the catalytic centers for reaction. Additionally, their flexible framework structure allows for easier adjustment of their pores compared to metal oxides and molecular sieves, which is advantageous for the diffusion of products within the framework. This property reduces the likelihood of prolonged contact between the generated propylene and the catalytic centers, thus minimizing the possibility of over-oxidation. The research on MOF catalyzed oxidative dehydrogenation of propane (ODHP) mainly focuses on the catalytic properties of MOFs with cobalt oxygen sites and boron oxygen sites. The advantages of cobalt oxygen site MOFs include significantly reduced energy consumption, enabling catalytic reactions at temperatures of 230 °C and below, while boron oxygen site MOFs exhibit high conversion rates and selectivity, albeit requiring higher temperatures. The explicit structure of MOFs facilitates the mechanistic study of these sites, enabling further optimization of catalysts. This paper provides an overview of the recent progress in utilizing MOFs as catalysts for ODHP and explores how they promote progress in ODHP catalysis. Finally, the challenges and future prospects of MOFs in the field of ODHP reactions are discussed.
RESUMEN
Anilines are core motifs in a variety of important molecules including medicines, materials and agrochemicals. We report a straightforward procedure that allows access to new chemical space of anilines via their para-C-H alkylation. The method utilizes commercially available catalytic H2 O â B(C6 F5 )3 and is highly selective for para-C-alkylation (over N-alkylation and ortho-C-alkylation) of anilines, with a wide scope in both the aniline substrates and alkene coupling partners. Readily available alkenes are used, and include new classes of alkene for the first time. The mild reaction conditions have allowed the procedure to be applied to the late-stage-functionalization of non-steroidal anti-inflammatory drugs (NSAIDs), including fenamic acids and diclofenac. The formed novel NSAID derivatives display improved anti-inflammatory properties over the parent NSAID structure.
Asunto(s)
Alquenos , Compuestos de Anilina , Alquenos/química , Compuestos de Anilina/química , Alquilación , Antiinflamatorios no Esteroideos , CatálisisRESUMEN
Propane (C3H8) is a widely used fuel gas. Metal-organic framework (MOF) physisorbents that are C3H8 selective offer the potential to significantly reduce the energy footprint for capturing C3H8 from natural gas, where C3H8 is typically present as a minor component. Here we report the C3H8 recovery performance of a previously unreported lonsdaleite, lon, topology MOF, a chiral metal-organic material, [Ni(S-IEDC)(bipy)(SCN)]n, CMOM-7. CMOM-7 was prepared from three low-cost precursors: Ni(SCN)2, S-indoline-2-carboxylic acid (S-IDECH), and 4,4'-bipyridine (bipy), and its structure was determined by single crystal X-ray crystallography. Pure gas adsorption isotherms revealed that CMOM-7 exhibited high C3H8 uptake (2.71 mmol g-1) at 0.05 bar, an indication of a higher affinity for C3H8 than both C2H6 and CH4. Dynamic column breakthrough experiments afforded high purity C3H8 capture from a gas mixture comprising C3H8/C2H6/CH4 (v/v/v = 5/10/85). Despite the dilute C3H8 stream, CMOM-7 registered a high dynamic uptake of C3H8 and a breakthrough time difference between C3H8 and C2H6 of 79.5 min g-1, superior to those of previous MOF physisorbents studied under the same flow rate. Analysis of crystallographic data and Grand Canonical Monte Carlo simulations provides insight into the two C3H8 binding sites in CMOM-7, both of which are driven by C-H···π and hydrogen bonding interactions.
RESUMEN
Solid-state batteries have become the most anticipated option for compatibility with high-energy density and safety. In situ polymerization, a novel strategy for the construction of solid-state systems, has extended its application from solid polymer electrolyte systems to other solid-state systems. This review summarizes the application of in situ polymerization strategies in solid-state batteries, which covers the construction of polymer, the formation of the electrolyte system, and the design of the full cell. For the polymer skeleton, multiple components and structures are being chosen. In the construction of solid polymer electrolyte systems, the choice of initiator for in situ polymerization is the focus of this review. New initiators, represented by lithium salts and additives, are the preferred choice because of their ability to play more diverse roles, while the coordination with other components can also improve the electrical properties of the system and introduce functionalities. In the construction of entire solid-state battery systems, the application of in situ polymerization to structure construction, interface construction, and the use of separators with multiplex functions has brought more possibilities for the development of various solid-state systems and even the perpetuation of liquid electrolytes.
RESUMEN
Gas hydrates provide alternative solutions for gas storage & transportation and gas separation. However, slow formation rate of clathrate hydrate has hindered their commercial development. Here we report a form of porous ice containing an unfrozen solution layer of sodium dodecyl sulfate, here named active ice, which can significantly accelerate gas hydrate formation while generating little heat. It can be readily produced via forming gas hydrates with water containing very low dosage (0.06 wt% or 600 ppm) of surfactant like sodium dodecyl sulfate and dissociating it below the ice point, or by simply mixing ice powder or natural snow with the surfactant. We prove that the active ice can rapidly store gas with high storage capacity up to 185 Vg Vw-1 with heat release of ~18 kJ mol-1 CH4 and the active ice can be easily regenerated by depressurization below the ice point. The active ice undergoes cyclic ice-hydrate-ice phase changes during gas uptake/release, thus removing most critical drawbacks of hydrate-based technologies. Our work provides a green and economic approach to gas storage and gas separation and paves the way to industrial application of hydrate-based technologies.
RESUMEN
BACKGROUND: Cutaneous metastasis with gastric cancer (GC) origin is extremely rare and associated with poor prognosis. Nodular type is the most common type, while other forms are extremely rare. CASE SUMMARY: This study describes severe skin redness, swelling, pain, and fever in a 65-year-old man diagnosed with GC, whose left chest wall, left upper limb, and left back were mainly affected. Firstly, the patient was diagnosed with "lymphangitis" and treated to promote lymphatic return. However, the symptoms were constantly deteriorating, and skin thickening and scattered small nodules gradually appeared. Finally, the skin biopsy confirmed cutaneous metastases, and the patient died 7 d later. CONCLUSION: Our case highlights that cutaneous metastasis should be considered when skin lesions appear in patients with GC.
RESUMEN
The central player for chromosome segregation in both mitosis and meiosis is the macromolecular kinetochore structure, which is assembled by >100 structural and regulatory proteins on centromere DNA. Kinetochores play a crucial role in cell division by connecting chromosomal DNA and microtubule polymers. This connection helps in the proper segregation and alignment of chromosomes. Additionally, kinetochores can act as a signaling hub, regulating the start of anaphase through the spindle assembly checkpoint, and controlling the movement of chromosomes during anaphase. However, the role of various kinetochore proteins in plant meiosis has only been recently elucidated, and these proteins differ in their functionality from those found in animals. In this review, our current knowledge of the functioning of plant kinetochore proteins in meiosis will be summarized. In addition, the functional similarities and differences of core kinetochore proteins in meiosis between plants and other species are discussed, and the potential applications of manipulating certain kinetochore genes in meiosis for breeding purposes are explored.
RESUMEN
Staurantherafloribunda F.Su, C.Y.Hao & K.Tan, a new species of Gesneriaceae from Yunnan, China, is described and illustrated here. It is morphologically similar to S.grandifolia Benth. in the shape of corolla, stigma, leaves and the number of stamens. However, it can be readily distinguished from the compared species by its dense cymes, leaf indumentum, lack of a corolla spur, calyx colour and stamen shape. The description of the new species, photographs, detailed descriptions, notes on etymology, distribution and habitat, as well as comparisons with morphologically similar species, are provided.
RESUMEN
The sap flow of trees is complex and difficult to express with multivariate linear or empirical models. A simple and feasible method on the basis of understanding sap flow variation to simulate its variation with environmental factors is of special importance for quantitatively analyzing forest ecohydrological processes and regional water demand. In this study, with one of the shelter forest species Euonymus bungeanus in the east sandy land of Yellow River in Ningxia as the research object, we continuously measured the trunk sap flow velocity by thermal diffusion sap flow meter, and analyzed the effects of environmental factors on stem sap flow. We used the particle swarm optimization (PSO) and sparrow search algorithm (SSA) optimized neural network model to predict sap flow velocity of E. bungeanus. Results showed that the main environmental factors influencing sap flow were solar radiation, vapor pressure deficit, air temperature, and relative humidity, with the influencing importance of 32.5%, 25.3%, 22.0% and 16.1%, respectively. The response process between sap flow and environmental factors presented a hysteresis loop relationship. The optimized BP, Elman and ELM neural network models improved the comprehensive evaluation index (GPI) by 1.5%, 30.0% and 5.3%, respectively. Compared with the PSO-Elman and SSA-ELM optimization models, the SSA-BP optimization model had the best prediction results with an improvement of 1.0% and 23.2% in GPI, respectively. Therefore, the prediction results of the BP neural network model based on the sparrow search algorithm could be used as an optimal model for predicting instantaneous sap flow velocity of E. bungeanus.
Asunto(s)
Euonymus , Redes Neurales de la Computación , Simulación por Computador , Algoritmos , BosquesRESUMEN
Chiral metal-organic materials (CMOMs), can offer molecular binding sites that mimic the enantioselectivity exhibited by biomolecules and are amenable to systematic fine-tuning of structure and properties. Herein, we report that the reaction of Ni(NO3)2, S-indoline-2-carboxylic acid (S-IDECH), and 4,4'-bipyridine (bipy) afforded a homochiral cationic diamondoid, dia, network, [Ni(S-IDEC)(bipy)(H2O)][NO3], CMOM-5. Composed of rod building blocks (RBBs) cross-linked by bipy linkers, the activated form of CMOM-5 adapted its pore structure to bind four guest molecules, 1-phenyl-1-butanol (1P1B), 4-phenyl-2-butanol (4P2B), 1-(4-methoxyphenyl)ethanol (MPE), and methyl mandelate (MM), making it an example of a chiral crystalline sponge (CCS). Chiral resolution experiments revealed enantiomeric excess, ee, values of 36.2-93.5%. The structural adaptability of CMOM-5 enabled eight enantiomer@CMOM-5 crystal structures to be determined. The five ordered crystal structures revealed that host-guest hydrogen-bonding interactions are behind the observed enantioselectivity, three of which represent the first crystal structures determined of the ambient liquids R-4P2B, S-4P2B, and R-MPE.
RESUMEN
To overcome the drawbacks of high solubility and instability of polyoxometalates (POMs) in aqueous solution and to expand their application in the electrocatalytic reduction of CO2 (ECR), we assemble sandwich-type POMs, K10[(PW9O34)2M4(H2O)2] (M = Mn, Ni, Zn, shortened as P2W18M4), into the hexagonal channel of a porphyrin-based metal-organic framework (MOF) PCN-222 to form P2W18M4@PCN-222 composites. Their ECR behavior displays polyoxoanion-dependent activity. P2W18Mn4@PCN-222 demonstrates a faradaic efficiency of 72.6% for the CO product (FECO), more than four times that of PCN-222 (FECO = 18.1%), and exhibits exceptional electrochemical stability over 36 h. P2W18Ni4@PCN-222 and P2W18Zn4@PCN-222 slightly increase (26.9%) and decrease (3.2%) in FECO, respectively. We combine the results with density functional theory (DFT) calculations to help understand the intrinsic reasons which reveals that the rate-determining step (RDS) reaction energy of P2W18Mn4@PCN-222 and P2W18Ni4@PCN-222 is significantly reduced compared to that of PCN-222. It is different in P2W18Zn4@PCN-222. Frontier molecular orbitals electron distribution results hint at directional electron transfer from P2W18Mn4/P2W18Ni4 to the porphyrin ring active center in PCN-222, promoting the electro-reduction of CO2 activity. By contrast, P2W18Zn4 may accumulate electrons from PCN-222, thus facilitating the hydrogen evolution reaction (HER). This work reveals the critical role of sandwich-type POMs in manipulating the electron transfer pathway during the electrocatalytic process. Our findings would broaden the scope of POM applications in electrochemical carbon dioxide reduction.
RESUMEN
Development of high-performance materials for the capture and separation of CO2 from the gas mixture is significant to alleviate carbon emission and mitigate the greenhouse effect. In this work, a novel structure of C9N7 slit was developed to explore its CO2 adsorption capacity and selectivity using Grand Canonical Monte Carlo (GCMC) and Density Functional Theory (DFT) calculations. Among varying slit widths, C9N7 with the slit width of 0.7 nm exhibited remarkable CO2 uptake with superior CO2/N2 and CO2/CH4 selectivity. At 1 bar and 298 K, a maximum CO2 adsorption capacity can be obtained as high as 7.06 mmol/g, and the selectivity of CO2/N2 and CO2/CH4 was 41.43 and 18.67, respectively. In the presence of H2O, the CO2 uptake of C9N7 slit decreased slightly as the water content increased, showing better water tolerance. Furthermore, the underlying mechanism of highly selective CO2 adsorption and separation on the C9N7 surface was revealed. The closer the adsorption distance, the stronger the interaction energy between the gas molecule and the C9N7 surface. The strong interaction between the C9N7 nanosheet and the CO2 molecule contributes to its impressive CO2 uptake and selectivity performance, suggesting that the C9N7 slit could be a promising candidate for CO2 capture and separation.