Axially aligned organic fibers and amorphous calcium phosphate form the claws of a terrestrial isopod (Crustacea).

Skeletal elements that are exposed to heavy mechanical loads may provide important insights into the evolutionary solutions to mechanical challenges. We analyzed the microscopic architecture of dactylus claws in the woodlice Porcellio scaber and correlated these observations with analyses of the claws' mineral composition with energy dispersive X-ray spectrometry (EDX), electron energy loss spectroscopy (EELS) and selected area electron diffraction (SAED). Extraordinarily, amorphous calcium phosphate is the predominant mineral in the claw endocuticle. Unlike the strongly calcified exocuticle of the dactylus base, the claw exocuticle is devoid of mineral and is highly brominated. The architecture of the dactylus claw cuticle is drastically different from that of other parts of the exoskeleton. In contrast to the quasi-isotropic structure with chitin-protein fibers oriented in multiple directions, characteristic of the arthropod exoskeleton, the chitin-protein fibers and mineral components in the endocuticle of P. scaber claws are exclusively axially oriented. Taken together, these characteristics suggest that the claw cuticle is highly structurally anisotropic and fracture resistant and can be explained as adaptations to predominant axial loading of the thin, elongated claws. The nanoscale architecture of the isopod claw may inspire technological solutions in the design of durable machine elements subjected to heavy loading and wear.

Electrochemical sensors for the simultaneous determination of zinc, cadmium and lead using a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode.

A simple, low cost, and highly sensitive electrochemical sensor, based on a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode (N/IL/G/SPCE) was developed to determine zinc (Zn(II)), cadmium (Cd(II)), and lead (Pb(II)) simultaneously. This disposable electrode shows excellent conductivity and fast electron transfer kinetics. By in situ plating with a bismuth film (BiF), the developed electrode exhibited well-defined and separate peaks for Zn(II), Cd(II), and Pb(II) by square wave anodic stripping voltammetry (SWASV). Analytical characteristics of the BiF/N/IL/G/SPCE were explored with calibration curves which were found to be linear for Zn(II), Cd(II), and Pb(II) concentrations over the range from 0.1 to 100.0 ng L(-1). With an accumulation period of 120 s detection limits of 0.09 ng mL(-1), 0.06 ng L(-1) and 0.08 ng L(-1) were obtained for Zn(II), Cd(II) and Pb(II), respectively using the BiF/N/IL/G/SPCE sensor, calculated as 3σ value of the blank. In addition, the developed electrode displayed a good repeatability and reproducibility. The interference from other common ions associated with Zn(II), Cd(II) and Pb(II) detection could be effectively avoided. Finally, the proposed analytical procedure was applied to detect the trace metal ions in drinking water samples with satisfactory results which demonstrates the suitability of the BiF/N/IL/G/SPCE to detect heavy metals in water samples and the results agreed well with those obtained by inductively coupled plasma mass spectrometry.

Gel-sol synthesis of rutile nanoparticles.

Titanium dioxide (TiO(2)) rutile nanoparticles were synthesized at temperatures below 100 °C using a gel-sol process that provides control of the final particles' characteristics, such as the nanoparticle size, morphology, crystal structure and crystallinity. The synthesized rutile nanoparticles were analyzed using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the gel-sol process allows control over the final nanoparticle characteristics with the proper choice of reaction parameters. The most profound influence on the nanoparticles' properties is achieved by the type and concentration of the acid used in the reaction mixture. The gel-sol synthesis resulted in anisotropic rutile nanoparticles that are 60-160 nm long, depending on the reaction parameters, and have an aspect ratio of about 5. A reaction mechanism is presented, explaining the influence of various reaction parameters on the characteristics of the TiO(2) nanoparticles.

Exoskeletal cuticle differentiation during intramarsupial development of Porcellio scaber (Crustacea: Isopoda).

Exoskeletal crustacean cuticle is a calcified apical extracellular matrix of epidermal cells, illustrating the chitin-based organic scaffold for biomineralization. Studies of cuticle formation during molting reveal significant dynamics and complexity of the assembly processes, while cuticle formation during embryogenesis is poorly investigated. This study reveals in the terrestrial isopod Porcellio scaber, the ultrastructural organization of the differentiating precuticular matrices and exoskeletal cuticles during embryonic and larval intramarsupial development. The composition of the epidermal matrices was obtained by WGA lectin labelling and EDXS analysis. At least two precuticular matrices, consisting of loosely arranged material with overlying electron dense lamina, are secreted by the epidermis in the mid-stage embryo. The prehatching embryo is the earliest developmental stage with a cuticular matrix consisting of an epicuticle and a procuticle, displaying WGA binding and forming cuticular scales. In newly hatched marsupial larva manca, a new cuticle is formed and calcium sequestration in the cuticle is evident. Progression of larval development leads to the cuticle thickening, structural differentiation of cuticular layers and prominent cuticle calcification. Morphological characteristics of exoskeleton renewal in marsupial manca are described. Elaborated cuticle in marsupial larvae indicates the importance of the exoskeleton in protection and support of the larval body in the marsupium and during the release of larvae in the external environment.

Highly efficient TiO2-based microreactor for photocatalytic applications.

A photocatalytic, TiO2-based microreactor is designed and fabricated on a metal-titanium foil. The microchannel is mechanically engraved in the substrate foil, and a double-layered TiO2 anatase film is immobilized on its inner walls with a two-step synthesis, which included anodization and a hydrothermal treatment. X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirm the presence of an approximately 10-µm-thick layer of titania nanotubes and anatase nanoparticles. The SEM and transmission electron microscopy (TEM) of the cross sections show a dense interface between the titanium substrate and the TiO2 nanotubes. An additional layer of TiO2-anatase nanoparticles on the top of the film provides a large, photocatalytic surface area. The metal-titanium substrate with a functionalized serpentine channel is sealed with UV-transparent Plexiglas, and four 0.8-mW UV LEDs combined with a power controller on a small printed-circuit board are fixed over the substrate. The photocatalytic activity and the kinetic properties for the degradation of caffeine are provided, and the longer-term stability of the TiO2 film is evaluated. The results show that after 6 months of use and 3600 working cycles the microreactor still exhibits 60% of its initial efficiency.

Calcium bodies of Titanethes albus (Crustacea: Isopoda): molt-related structural dynamics and calcified matrix-associated bacteria.

Crustaceans form a variety of calcium deposits in which they store calcium necessary for the mineralization of their exoskeletons. Calcium bodies, organs containing large amounts of calcium, have been reported in some terrestrial isopod crustaceans, but have not yet been extensively studied. We analyzed the architecture of these organs during the molt cycle in the isopod Titanethes albus. Two pairs of calcium bodies are positioned ventrolaterally in posterior pereonites of T. albus. Individual organs are epithelial sacs that contain material arranged in concentric layers delimited by thin laminae. As demonstrated by electron microscopy and fluorescence in situ hybridization, abundant bacteria are present within the calcium bodies. Regardless of the molt cycle stage, crystalline concretions are present in the central areas of the calcium bodies. Energy dispersive X-ray spectrometry of the concretions demonstrated that they are composed predominantly of calcium and phosphorus and selected area electron diffraction indicated the presence of hydroxyapatite. In molting animals, a glassy layer of mineralized matrix is formed between the envelope and the outermost lamina of the calcium body. This layer consists of an amorphous calcium mineral which contains less phosphorus than the central concretions and is resorbed after molt. Since changes in the mineralized matrix are synchronized with the molt cycle, the calcium bodies likely function as a storage compartment that complements sternal deposits as a source of calcium for the mineralization of the exoskeleton. Bacteria associated with the mineralized matrix of calcium bodies are evidently involved in calcium dynamics.

Characterization of individual barium titanate nanorods and their assessment as building blocks of new circuit architectures.

In this work, we report on the integration of individual BaTiO(3) nanorods into simple circuit architectures. Polycrystalline BaTiO(3) nanorods were synthesized by electrophoretic deposition (EPD) of barium titanate sol into aluminium oxide (AAO) templates and subsequent annealing. Transmission electron microscopy (TEM) observations revealed the presence of slabs of hexagonal polymorphs intergrown within cubic grains, resulting from the local reducing atmosphere during the thermal treatment. Electrical measurements performed on individual BaTiO(3) nanorods revealed resistivity values between 10 and 100 Ω cm, which is in good agreement with typical values reported in the past for oxygen-deficient barium titanate films. Consequently the presence of oxygen vacancies in their structure was indirectly validated. Some of these nanorods were tested as proof-of-concept humidity sensors. They showed reproducible responses towards different moisture concentrations, demonstrating that individual BaTiO(3) nanorods may be integrated in complex circuit architectures with functional capacities.

Oriented cube-on-cube nanocrystal assembly of SrTiO3 tubules.

We report on an unusual crystallization phenomenon that results in the self-assembly of sub-micron tubules of crystalline SrTiO(3). The deposition of the tubular structures was done in the pores of anodized aluminum oxide templates by the electrophoretic deposition of SrTiO(3) sols and subsequent annealing. Homogeneous nucleation inside the pores produces a critical number of crystallites leading to their self-organization when the nanocrystals reach sizes that equal the mean free distances between the nuclei. Due to steric constraints the crystals start to organize in order to most efficiently fill the available surface of the pore walls. This process leads to the formation of domains containing a large number of idiomorphic SrTiO(3) nano-cubes that are self-aligned into almost perfect cube-on-cube and cube-to-wall registry, which makes up the walls of the tubules. The described mechanism shows the ability of nanocrystals with well defined morphologies to adapt spatial constraints and self-organize into desired geometries.