RESUMEN
The highly active and selective electrochemical CO2 reduction reaction (CO2RR) can be exploited to produce valuable chemicals and fuels and is also crucial for achieving clean energy goals and environmental remediation. Decorated single-atom catalysts (D-SACs), which feature synergistic interactions between the active metal site (M) and an axially decorated ligand, have been extensively explored for the CO2RR. Very recently, novel double-atom catalysts (DACs) featuring inverse sandwich structures were theoretically proposed and identified as promising CO2RR electrocatalysts. However, the experimental synthesis of DACs remains a challenge. To facilitate the fabrication and to realize the potential of these novel DACs, we designed a D-SAC system, denoted as M1@gra+Cuslab. This system features a graphene layer with a vacancy-anchored SAC, all stacked on a Cu(111) surface, thereby embodying a Cu slab-supported inverse sandwich M-graphene-Cu structure. Using density functional theory calculations, we evaluated the stability, selectivity, and activity of 27 M1@gra+Cuslab systems (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Zr, Nb, Mo, Ru, Rh, Pd, Ag, Cd, Hf, Ta, W, Re, Os, Ir, Pt, or Au) and showed five M1@gra+Cuslab (M = Co, Ni, Cu, Rh, or Pd) systems exhibit optimal characteristics for the CO2RR and can potentially outperform their SAC and DAC counterparts. This study offers a new strategy for developing highly efficient CO2RR D-SACs with an inverse sandwich structural moiety.
RESUMEN
Low-dimensional water transport can be drastically enhanced under atomic-scale confinement. However, its microscopic origin is still under debate. In this work, we directly imaged the atomic structure and transport of two-dimensional water islands on graphene and hexagonal boron nitride surfaces using qPlus-based atomic force microscopy. The lattice of the water island was incommensurate with the graphene surface but commensurate with the boron nitride surface owing to different surface electrostatics. The area-normalized static friction on the graphene diminished as the island area was increased by a power of ~-0.58, suggesting superlubricity behavior. By contrast, the friction on the boron nitride appeared insensitive to the area. Molecular dynamic simulations further showed that the friction coefficient of the water islands on the graphene could reduce to <0.01.
RESUMEN
Transition metal oxides are promising catalysts for catalytic oxidation reactions but are hampered by low room-temperature activities. Such low activities are normally caused by sparse reactive sites and insufficient capacity for molecular oxygen (O2) activation. Here, we present a dual-stimulation strategy to tackle these two issues. Specifically, we import highly dispersed nickel (Ni) atoms onto MnO2 to enrich its oxygen vacancies (reactive sites). Then, we use molecular ozone (O3) with a lower activation energy as an oxidant instead of molecular O2. With such dual stimulations, the constructed O3-Ni/MnO2 catalytic system shows boosted room-temperature activity for toluene oxidation with a toluene conversion of up to 98%, compared with the O3-MnO2 (Ni-free) system with only 50% conversion and the inactive O2-Ni/MnO2 (O3-free) system. This leap realizes efficient room-temperature catalytic oxidation of transition metal oxides, which is constantly pursued but has always been difficult to truly achieve.
RESUMEN
Inverted p-i-n perovskite solar cells (PSCs) are easy to process but need improved interface characteristics with reduced energy loss to prevent efficiency drops when increasing the active photovoltaic area. Here, we report a series of poly ferrocenyl molecules that can modulate the perovskite surface enabling the construction of small- and large-area PSCs. We found that the perovskite-ferrocenyl interaction forms a hybrid complex with enhanced surface coordination strength and activated electronic states, leading to lower interfacial nonradiative recombination and charge transport resistance losses. The resulting PSCs achieve an enhanced efficiency of up to 26.08% for small-area devices and 24.51% for large-area devices (1.0208 cm2). Moreover, the large-area PSCs maintain >92% of the initial efficiency after 2000 h of continuous operation at the maximum power point under 1-sun illumination and 65 °C.
RESUMEN
Aqueous electrolytes subjected to angstrom-scale confinement have recently attracted increasing interest because of their distinctive structural and transport properties, as well as their promising applicability in bioinspired nanofluidic iontronics and ion batteries. Here, we performed microsecond-scale molecular dynamics simulations, which provided evidence of nonlinear ionic conductance under an external lateral electric field due to the self-assembly of cations and anions with diverse polyelectrolyte morphologies (e.g., extremely large ion clusters) in aqueous solutions within angstrom-scale slits. Specifically, we found that the cations and anions of Li2SO4 and CaSO4 formed chain-like polyelectrolyte structures, whereas those of Na2SO4 and MgSO4 predominantly formed a monolayer of hydrated salt. Additionally, the cations and anions of K2SO4 assembled into a hexagonal anhydrous ionic crystal. These ion-dependent diverse polyelectrolyte morphologies stemmed from the enhanced Coulomb interactions, weakened hydration and steric constraints within the angstrom-scale slits. More importantly, once the monolayer hydrated salt or ionic crystal structure was formed, the field-induced ion current exhibited an intriguing gating effect at a low field strength. This abnormal ion transport was attributed to the concerted movement of cations and anions within the solid polyelectrolytes, leading to the suppression of ion currents. When the electric field exceeded a critical strength, however, the ion current surged rapidly due to the dissolution of many cations and anions within a few nanoseconds in the aqueous solution.
RESUMEN
Interfacial water on a metal surface acts as an active layer through the reorientation of water, thereby facilitating the energy transfer and chemical reaction across the metal surface in various physicochemical and industrial processes. However, how this active interfacial water collectively behaves on flat noble metal substrates remains largely unknown due to the experimental limitation in capturing librational vibrational motion of interfacial water and prohibitive computational costs at the first-principles level. Herein, by implementing a machine-learning approach to train neural network potentials, we enable performing advanced molecular dynamics simulations with ab initio accuracy at a nanosecond scale to map the distinct rotational motion of water molecules on a metal surface at room temperature. The vibrational density of states of the interfacial water with two-layer profiles reveals that the rotation and vibration of water within the strong adsorption layer on the metal surface behave as if the water molecules in the bulk ice, wherein the O-H stretching frequency is well consistent with the experimental results. Unexpectedly, the water molecules within the adjacent weak adsorption layer exhibit superdiffusive rotation, contrary to the conventional diffusive rotation of bulk water, while the vibrational motion maintains the characteristic of bulk water. The mechanism underlying this abnormal superdiffusive rotation is attributed to the translation-rotation decoupling of water, in which the translation is restrained by the strong hydrogen bonding within the bilayer interfacial water, whereas the rotation is accelerated freely by the asymmetric water environment. This superdiffusive rotation dynamics may elucidate the experimentally observed large fluctuation of the potential of zero charge on Pt and thereby the conventional Helmholtz layer model revised by including the contribution of interfacial water orientation. The surprising superdiffusive rotation of vicinal water next to noble metals will shed new light on the physicochemical processes and the activity of water molecules near metal electrodes or catalysts.
RESUMEN
Water tends to wet all hydrophilic surfaces under ambient conditions, and the first water adlayers on solids are important for a broad range of physicochemical phenomena and technological processes, including corrosion, wetting, lubrication, anti-icing, catalysis, and electrochemistry. Unfortunately, challenges in characterizing the first water adlayer in the laboratory have hampered molecular-level understanding of the contact water structure. Herein, we present the first ab initio molecular dynamics simulation evidence of a previously unreported ice-like adlayer structure (named as Ice-AL-II) on a prototype mica surface under ambient conditions. Calculation showed that the newly identified Ice-AL-II structure is more stable than the widely recognized ice-adlayer structure on mica surfaces (named as Ice-AL-I). Ice-AL-II exhibited a face-centered corner-cut tetragon (or a face-centered irregular pentagon) pattern of a hydrogen-bonded network. The center of the corner-cut tetragon was occupied by either a K+ cation or a water molecule with two H atoms pinned by the mica (100) via double hydrogen bonds. Our simulation also suggested that bilayer Ice-AL-II favors AA stacking rather than AB stacking. Interestingly, when a graphene sheet was coated on top of the ice-like adlayer, the stability of Ice-AL-II was further enhanced. In contrast, due to its strongly puckered structure, the Ice-AL-I structure could be crushed into a near-Ice-AL-II structure by the graphene coating. Ice-AL-II is thus proposed as a promising candidate for the ice-like structure on a mica surface detected by scanning polarization force microscopy and by atomic force microscopy between a graphene coating and a mica surface.
RESUMEN
Decoration of an axial coordination ligand (ACL) on the active metal site is a highly effective and versatile strategy to tune activity of single-atom catalysts (SACs). However, the regulation mechanism of ACLs on SACs is still incompletely known. Herein, we investigate diversified combinations of ACL-SACs, including all 3d-5d transition metals and ten prototype ACLs. We identify that ACLs can weaken the adsorption capability of the metal atom (M) by raising the bonding energy levels of the M-O bond while enhancing dispersity of the d orbital of M. Through examination of various local configurations and intrinsic parameters of ACL-SACs, a general structure descriptor σ is constructed to quantify the structure-activity relationship of ACL-SACs which solely based on a few key intrinsic features. Importantly, we also identified the axial ligand descriptor σACL, as a part of σ, which can serve as a potential descriptor to determine the rate-limiting steps (RLS) of ACL-SACs in experiment. And we predicted several ACL-SACs, namely, CrN4-, FeN4-, CoN4-, RuN4-, RhN4-, OsN4-, IrN4- and PtN4-ACLs, that entail markedly higher activities than the benchmark catalysts of Pt and IrO2 for oxygen reduction reaction and oxygen evolution reaction, respectively, thereby supporting that the general descriptor σ can provide a simple and cost-effective method to assess efficient electrocatalysts.
RESUMEN
In extreme and nanoconfinement conditions, the tetrahedral arrangement of water molecules is challenged, resulting in a rich and new phase behavior unseen in bulk phases. The unique phase behavior of water confined in hydrophobic nanoslits has been previously observed, such as the formation of a variety of two-dimensional (2D) ices below the freezing temperature. The primary identified 2D ice phase, termed square tube ice (STI), represents a unique arrangement of water molecules in 2D ice, which can be viewed as an array of 1D ice nanotubes stacked in the direction parallel to the confinement plane. In this study, we report the molecular dynamics (MD) simulations evidence of a novel 2D ice phase, namely, helical square tube ice (H-STI). H-STI is characterized by the stacking of helical ice nanotubes in the direction parallel to the confinement plane. Its structural specificity is evident in the presence of helical square ice nanotubes, a configuration unseen in both STI and single-walled ice nanotubes. A detailed analysis of the hydrogen bonding strength showed that H-STI is a 2D ice phase diverging from the Bernal-Fowler-Pauling ice rules by forming only two strong hydrogen bonds between adjacent molecules along its helical ice chain. This arrangement of strong hydrogen bonds along ice nanotube and weak bonds between the ice nanotube shows a similarity to quasi-one-dimensional van der Waals materials. Ab initio molecular dynamics simulations (over a 30 ps) were employed to further verify H-STI's stability at 1 GPa and temperature up to 200 K.
RESUMEN
Microdroplets are a class of soft matter that has been extensively employed for chemical, biochemical, and industrial applications. However, fabricating microdroplets with largely controllable contact-area shape and apparent contact angle, a key prerequisite for their applications, is still a challenge. Here, by engineering a type of surface with homocentric closed-loop microwalls/microchannels, we can achieve facile size, shape, and contact-angle tunability of microdroplets on the textured surfaces by design. More importantly, this class of surface topologies (with universal genus value = 1) allows us to reveal that the conventional Gibbs equation (widely used for assessing the edge effect on the apparent contact angle of macrodroplets) seems no longer applicable for water microdroplets or nanodroplets (evidenced by independent molecular dynamics simulations). Notably, for the flat surface with the intrinsic contact angle ~0°, we find that the critical contact angle on the microtextured counterparts (at edge angle 90°) can be as large as >130°, rather than 90° according to the Gibbs equation. Experiments show that the breakdown of the Gibbs equation occurs for microdroplets of different types of liquids including alcohol and hydrocarbon oils. Overall, the microtextured surface design and topological wetting states not only offer opportunities for diverse applications of microdroplets such as controllable chemical reactions and low-cost circuit fabrications but also provide testbeds for advancing the fundamental surface science of wetting beyond the Gibbs equation.
RESUMEN
Low-dimensional/three-dimensional perovskite heterojunctions have shown great potential for improving the performance of perovskite photovoltaics, but large organic cations in low-dimensional perovskites hinder charge transport and cause carrier mobility anisotropy at the heterojunction interface. Here, we report a low-dimensional/three-dimensional perovskite heterojunction that introduces strong aromatic conjugated low-dimensional perovskites in p-i-n devices to reduce the electron transport resistance crossing the perovskite/electron extraction interface. The strong aromatic conjugated π-conjugated network results in continuous energy orbits among [Pb2I6]2- frameworks, thereby effectively suppressing interfacial non-radiative recombination and boosting carrier extraction. Consequently, the devices achieved an improved efficiency to 25.66% (certified 25.20%), and maintained over 95% of the initial efficiency after 1200 hours and 1000 hours under ISOS-L-1I and ISOS-D-1 protocols, respectively. The chemical design of strong aromatic conjugated molecules in perovskite heterojunctions provides a promising avenue for developing efficient and stable perovskite photovoltaics.
RESUMEN
Exploration of two-dimensional (2D) sliding ferroelectric (FE) materials with experimentally detectable ferroelectricity and value-added novel functionalities is highly sought for the development of 2D "slidetronics". Herein, based on first-principles calculations, we identify the synthesizable van der Waals (vdW) layered crystals HgX2 (X = Br and I) as a new class of 2D sliding ferroelectrics. Both HgBr2 and HgI2 in 2D multilayered forms adopt the preferential stacking sequence, leading to room temperature stable out-of-plane (vertical) ferroelectricity that can be reversed via the sliding of adjacent monolayers. Owing to strong interlayer coupling and interfacial charge rearrangement, 2D HgI2 layers possess strong sliding ferroelectricity up to 0.16 µC/cm2, readily detectable in experiment. Moreover, robust sliding ferroelectricity and interlayer sliding controllable Rashba spin texture of FE-HgI2 layers enable potential applications as 2D spintronic devices such that the electric control of electron spin detection can be realized at the 2D regime.
RESUMEN
Achieving timely, reversible, and long-range remote tunability over surface wettability is highly demanded across diverse fields, including nanofluidic systems, drug delivery, and heterogeneous catalysis. Herein, using molecular dynamic simulations, we show, for the first time, a theoretical design of electrowetting to achieve remotely controllable surface wettability via using a terahertz wave. The key idea driving the design is the unique terahertz collective vibration identified in the vicinal subnanoscale water layer, which is absent in bulk water, enabling efficient energy transfer from the terahertz wave to the rotational motion of the vicinal subnanoscale water layer. Consequently, a frequency-specific alternating terahertz electric field near the critical strength can significantly affect the local hydrogen-bonding network of the contact water layer on the solid surface, thereby achieving tunable surface wettability.
RESUMEN
Intragrain impurities can impart detrimental effects on the efficiency and stability of perovskite solar cells, but they are indiscernible to conventional characterizations and thus remain unexplored. Using in situ scanning transmission electron microscopy, we reveal that intragrain impurity nano-clusters inherited from either the solution synthesis or post-synthesis storage can revert to perovskites upon irradiation stimuli, leading to the counterintuitive amendment of crystalline grains. In conjunction with computational modelling, we atomically resolve crystallographic transformation modes for the annihilation of intragrain impurity nano-clusters and probe their impacts on optoelectronic properties. Such critical fundamental findings are translated for the device advancement. Adopting a scanning laser stimulus proven to heal intragrain impurity nano-clusters, we simultaneously boost the efficiency and stability of formamidinium-cesium perovskite solar cells, by virtual of improved optoelectronic properties and relaxed intra-crystal strain, respectively. This device engineering, inspired and guided by atomic-scale in situ microscopic imaging, presents a new prototype for solar cell advancement.
RESUMEN
We present a theoretical design of a class of 2D semiconducting materials, namely, group III (In/Ga)-V (P/As)-VI (S/Se) monolayers, whose global-minimum structures are predicted based on the particle swarm optimization method. Electronic structure calculations suggest that all group III-V-VI monolayers exhibit quasi-direct semiconducting characteristics with desirable band gaps ranging from 1.76 to 2.86 eV (HSE06 functional). Moreover, most group III-V-VI monolayers possess highly anisotropic carrier mobilities with large anisotropic ratios (3.4-6 for electrons, 2.2-25 for holes). G0W0+BSE calculations suggest that these monolayers show high optical anisotropy and relatively large exciton binding energies (0.33-0.75 eV), comparable to that (0.5 eV) of MoS2 monolayer. In particular, the GaPS monolayer manifests strikingly anisotropic I-V curves with a large ON/OFF ratio of â¼105 (106 for the GaPS bilayer) and anisotropic lattice thermal conductivity. Furthermore, the GaPS monolayer is predicted to exhibit both in-plane and out-of-plane negative Poisson ratios (NPRs) and prominent anisotropic Young moduli.
RESUMEN
Self-assembly is a widely used synthetic method in nanoscience to assemble well-organized structures. Self-assembly processes usually occur in a water solvent environment. However, the self-assembly of water molecules is rarely studied. Herein, we show a strategy to fabricate porous ice via carbon nanomaterial-assisted self-assembly. Diverse frameworks of nanoporous ice are formed by using orthorhombic and tetragonal arrays of carbon nanotubes or carbon-atom chains as templates. In contrast to many bulk ices discovered in nature, nanoporous ices are shown to be stable only under negative pressure. Hence, nanoporous ices cannot be produced through the direct nucleation of water at negative pressure. The template-assisted self-assembly method is shown to be the most effective method to fabricate nanoporous ice in quantity. Several key factors for the self-assembly of nanoporous ices are identified, including proper gap spacings in the carbon nanomaterial template and suitable interactions between water and the carbon nanomaterials.
RESUMEN
Modern synthetic technology generally invokes high temperatures to control the hydration level of ceramics, but even the state-of-the-art technology can still only control the overall hydration content. Magically, natural organisms can produce bioceramics with tailorable hydration profiles and crystallization traits solely from amorphous precursors under physiological conditions. To mimic the biomineralization tactic, here, we report pressure-controlled hydration and crystallization in fabricated ceramics, solely from the amorphous precursors of purely inorganic gels (PIGs) synthesized from biocompatible aqueous solutions with most common ions in organisms (Ca2+, Mg2+, CO32-, and PO43-). Transparent ceramic tablets are directly produced by compressing the PIGs under mild pressure, while the pressure regulates the hydration characteristics and the subsequent crystallization behaviors of the synthesized ceramics. Among the various hydration species, the moderately bound and ordered water appears to be a key in regulating the crystallization rate. This nature-inspired study offers deeper insights into the magic behind biomineralization.
RESUMEN
Pristine graphene and h-BN monolayers are chemically inert to oxygen and thus exhibit very limited catalytic activity toward O2 activation. Herein, we show that graphene/h-BN heterostructures exhibit a surprising O2 activation capability. We theoretically designed ten graphene/h-BN heterostructures with three types of interfaces and investigated their catalytic activities toward O2 activation and CO-oxidation. In general, O2 can be molecularly chemisorbed and activated on electron-rich graphene/h-BN heterostructures. Electron-deficient graphene/h-BN heterostructures can lead to dissociative O2 adsorption with relatively low dissociation energy barriers (<0.4 eV). For CO-oxidation, the computed energy barrier can be as low as 0.67 eV. The high catalytic activities toward O2 stem from either electron-deficient heterostructures' accumulated electrons or electron richness and low work function for the electron-rich heterostructures. Although the catalytic activities of graphene/h-BN heterostructures depend strongly on the interface type, they are insensitive to the patterns of BN-substitutes, hence benefiting applicability of a wide range of heterostructures.
RESUMEN
Clathrate hydrates reserved in the seabed are often dispersed in the pores of coarse-grained sediments; hence, their formation typically occurs under nanoconfinement. Herein, we show the first molecular dynamics (MD) simulation evidence of the spontaneous formation of two-dimensional (2D) clathrate hydrates on crystal surfaces without conventional nanoconfinement. The kinetic process of 2D clathrate formation is illustrated via simulated single-molecule deposition. 2D amorphous patterns are observed on various superhydrophilic face-centered cubic surfaces. Notably, the formation of 2D amorphous clathrate can occur over a wide range of temperatures, even at room temperature. The strong water-surface interaction, the characteristic properties of guest-gas molecules, and the underlying surface structure dictate the formation of 2D amorphous clathrates. Semiquantitative phase diagrams of 2D clathrates are constructed where representative patterns of 2D clathrates for characteristic gas molecules on prototypical Pd(111) and Pt(111) surfaces are confirmed by independent MD simulations. A tunable pattern of 2D amorphous clathrates is demonstrated by changing the lattice strain of the underlying substrate. Moreover, ab initio MD simulations confirm the stability of 2D amorphous clathrate. The underlining physical mechanism for 2D clathrate formation on superhydrophilic surfaces is elucidated, which offers deeper insight into the crucial role of water-surface interaction.
RESUMEN
Monoatomic dispersion of precious metals on the surface of CeO2 nanocrystals is a highly practical approach for dramatically reducing the usage of precious metals while exploiting the unique properties of single-atom catalysts. However, the specific atomic sites for anchoring precious metal atoms on the CeO2 support and underlying chemical mechanism remain partially unknown. Herein, we show that the terminal hydroxyls on the (100) surface are the most stable sites for anchoring Ag atoms on CeO2 , indicating that CeO2 nanocubes are the most efficient substrates to achieve monoatomic dispersion of Ag. Importantly, the newly identified chemical mechanism for single-metal-atom dispersion on CeO2 nanocubes appears to be generic and can thus be extended to other precious metals (Pt and Pd). In fact, our experiments also show that atomically dispersed Pt/Pd species exhibit morphology- and temperature-dependent CO selectivity in the catalytic CO2 hydrogenation reaction.