Origin of Grain-Coating Chlorite and Implications for Reservoir Quality in the Triassic Deep-Buried Volcaniclastic Sandstones, Central Junggar Basin, Northwestern China.

The occurrence and genesis of grain-coating chlorite were investigated in order to evaluate the impact of grain-coating chlorite on preserving porosity in the deep-buried Triassic Karamay volcaniclastic sandstones based on thin sections, scanning electron microscopy, and an electron probe. Grain-coating chlorite was formed during the eogenesis, originating from the precursor of smectite through the solid-state transformation (SST) mechanism. The hydration and dissolution of unstable, intermediately basic volcanic rock fragments provided essential Fe2+ and Mg2+ ions for the formation of grain-coating chlorite. Due to relatively high stability and low susceptibility to dissolution, acidic volcanic rock fragments could not promote chlorite formation but resulted in authigenic quartz and clays as pore-filling cements. This process would destroy reservoir properties. Under high hydraulic conditions, medium- to coarse-grained sandstone experienced saltation transport, creating significant velocity differentials and pressure differentials on grain surfaces. Subsequently, clay grains adhere to the surfaces, forming grain-coating chlorite during diagenesis with good continuity. In contrast, pebbly sandstone undergoes rolling transport, resulting in smaller velocity differentials on grain surfaces. This makes relatively ineffective clay adsorption and leads to discontinuous grain-coating chlorite in subsequent stages. Under weak hydraulic conditions, grains and clay particles in fine-grained sandstone undergo suspended transport, lacking mutual movement and velocity differentials. Clay particles cannot effectively cover particles but instead fill the pores between them. Therefore, continuous grain-coating chlorite is more commonly developed in the medium- to coarse-grained sandstones and is crucial for inhibiting quartz cementation with a coverage rate exceeding 80%. Inadequate coatings fail to inhibit quartz cementation effectively, while excessive coatings may block pore throats. Optimal protection of primary porosity could occur only when grain-coating chlorite is moderately developed.

Catalyst-Free Activation and Fixation of Nitrogen by Laser-Induced Conversion.

Ultrafast N2 fixation reactions are quite challenging. Currently used methods for N2 fixation are limited, and strong dinitrogen bonds usually need to be activated via extreme temperature or pressure or by the use of an energy-consuming process with sophisticated catalysts. Herein, we report a novel laser-based chemical method for N2 fixation under ambient conditions without catalysts, this method is called laser bubbling in liquids (LBL), and it directly activates N2 in water (H2O) and efficiently converts N2 into valuable NH3 (max: 4.2 mmol h-1) and NO3- (0.17 mmol h-1). Remarkably, the highest yields of NH3 and NO3- are 4 orders of magnitude greater than the best values for electrocatalysis reported to date. Notably, we further validate the experimental mechanism by using optical emission spectroscopy to detect the production of intermediate plasma and by employing isotope tracing. We also establish that an extremely high-temperature environment far from thermodynamic equilibrium inside a laser-induced bubble and the kinetic process of rapid quenching of bubbles is crucial for N2 activation and fixation to generate NH3 and NOx via LBL. Based on these results, it is shown that LBL is a simple, safe, efficient, green, and sustainable technology that enables the rapid conversion of the renewable feedstocks H2O and N2 to NH3 and NO3-, facilitating new prospects for chemical N2 fixation.

High Sensitivity and Wide Linear Range Flexible Piezoresistive Pressure Sensor with Microspheres as Spacers for Pronunciation Recognition.

Flexible piezoresistive pressure sensors have received great popularity in flexible electronics due to their simple structure and promising applications in health monitoring and artificial intelligence. However, the contradiction between sensitivity and detection range limits the application of the sensors in the medium-pressure regime. Here, a flexible piezoresistive pressure sensor is fabricated by combining a hierarchical spinous microstructure sensitive layer and a periodic microsphere array spacer. The sensor achieves high sensitivity (39.1 kPa-1) and outstanding linearity (0.99, R2 coefficient) in a medium-pressure regime, as well as a wide range of detection (100 Pa-160.0 kPa), high detection precision (<0.63‰ full scale), and excellent durability (>5000 cycles). The mechanism of the microsphere array spacer in improving sensitivity and detection range was revealed through finite element analysis. Furthermore, the sensors have been utilized to detect muscle and joint movements, spatial pressure distributions, and throat movements during pronouncing words. By means of a full-connect artificial neural network for machine learning, the sensor's output of different pronounced words can be precisely distinguished and classified with an overall accuracy of 96.0%. Overall, the high-performance flexible pressure sensor based on a microsphere array spacer has great potential in health monitoring, human-machine interface, and artificial intelligence of medium-pressure regime.

Stretchable, Transparent, and Ultra-Broadband Terahertz Shielding Thin Films Based on Wrinkled MXene Architectures.

With the increasing demand for terahertz (THz) technology in security inspection, medical imaging, and flexible electronics, there is a significant need for stretchable and transparent THz electromagnetic interference (EMI) shielding materials. Existing EMI shielding materials, like opaque metals and carbon-based films, face challenges in achieving both high transparency and high shielding efficiency (SE). Here, a wrinkled structure strategy was proposed to construct ultra-thin, stretchable, and transparent terahertz shielding MXene films, which possesses both isotropous wrinkles (height about 50 nm) and periodic wrinkles (height about 500 nm). Compared to flat film, the wrinkled MXene film (8 nm) demonstrates a remarkable 36.5% increase in SE within the THz band. The wrinkled MXene film exhibits an EMI SE of 21.1 dB at the thickness of 100 nm, and an average EMI SE/t of 700 dB µm-1 over the 0.1-10 THz. Theoretical calculations suggest that the wrinkled structure enhances the film's conductivity and surface plasmon resonances, resulting in an improved THz wave absorption. Additionally, the wrinkled structure enhances the MXene films' stretchability and stability. After bending and stretching (at 30% strain) cycles, the average THz transmittance of the wrinkled film is only 0.5% and 2.4%, respectively. The outstanding performances of the wrinkled MXene film make it a promising THz electromagnetic shielding materials for future smart windows and wearable electronics.

Endocytic activation and exosomal secretion of matriptase stimulate the second wave of EGF signaling to promote skin and breast cancer invasion.

The dysfunction of matriptase, a membrane-anchored protease, is highly related to the progression of skin and breast cancers. Epidermal growth factor (EGF)-induced matriptase activation and cancer invasion are known but with obscure mechanisms. Here, we demonstrate a vesicular-trafficking-mediated interplay between matriptase and EGF signaling in cancer promotion. We found that EGF induces matriptase to undergo endocytosis together with the EGF receptor, followed by acid-induced activation in endosomes. Activated matriptase is then secreted extracellularly on exosomes to catalyze hepatocyte growth factor precursor (pro-HGF) cleavage, resulting in autocrine HGF/c-Met signaling. Matriptase-induced HGF/c-Met signaling represents the second signal wave of EGF, which promotes cancer cell scattering, migration, and invasion. These findings demonstrate a role of vesicular trafficking in efficient activation and secretion of membrane matriptase and a reciprocal regulation of matriptase and EGF signaling in cancer promotion, providing insights into the physiological functions of vesicular trafficking and the molecular pathological mechanisms of skin and breast cancers.

Effect of screening colonoscopy frequency on colorectal cancer mortality in patients with a family history of colorectal cancer.

BACKGROUND: Colorectal cancer is a common malignant tumor in China, and its incidence in the elderly is increasing annually. Inflammatory bowel disease is a group of chronic non-specific intestinal inflammatory diseases, including ulcerative colitis and Crohn's disease. AIM: To assess the effect of screening colonoscopy frequency on colorectal cancer mortality. METHODS: We included the clinicopathological and follow-up data of patients with colorectal cancer who underwent laparoscopic colectomy or open colectomy at our Gastrointestinal Department between January 2019 and December 2022. Surgical indicators, oncological indicators, and survival rates were compared between the groups. The results of 104 patients who met the above criteria were extracted from the database (laparoscopic colectomy group = 63, open colectomy group = 41), and there were no statistically significant differences in the baseline data or follow-up time between the two groups. RESULTS: Intraoperative blood loss, time to first ambulation, and time to first fluid intake were significantly lower in the laparoscopic colectomy group than in the open colectomy group. The differences in overall mortality, tumor-related mortality, and recurrence rates between the two groups were not statistically significant, and survival analysis showed that the differences in the cumulative overall survival, tumor-related survival, and cumulative recurrence-free rates between the two groups were not statistically significant. CONCLUSION: In elderly patients with colorectal cancer, laparoscopic colectomy has better short-term outcomes than open colectomy, and laparoscopic colectomy has superior long-term survival outcomes compared with open colectomy.

Phase separation of Nur77 mediates XS561-induced apoptosis by promoting the formation of Nur77/Bcl-2 condensates.

The orphan nuclear receptor Nur77 is a critical regulator of the survival and death of tumor cells. The pro-death effect of Nur77 can be regulated by its interaction with Bcl-2, resulting in conversion of Bcl-2 from a survival to killer. As Bcl-2 is overexpressed in various cancers preventing them from apoptosis and promoting their resistance to chemotherapy, targeting the apoptotic pathway of Nur77/Bcl-2 may lead to new cancer therapeutics. Here, we report our identification of XS561 as a novel Nur77 ligand that induces apoptosis of tumor cells by activating the Nur77/Bcl-2 pathway. In vitro and animal studies revealed an apoptotic effect of XS561 in a range of tumor cell lines including MDA-MB-231 triple-negative breast cancer (TNBC) and MCF-7/LCC2 tamoxifen-resistant breast cancer (TAMR) in a Nur77-dependent manner. Mechanistic studies showed XS561 potently induced the translocation of Nur77 from the nucleus to mitochondria, resulting in mitochondria-related apoptosis. Interestingly, XS561-induced accumulation of Nur77 at mitochondria was associated with XS561 induction of Nur77 phase separation and the formation of Nur77/Bcl-2 condensates. Together, our studies identify XS561 as a new activator of the Nur77/Bcl-2 apoptotic pathway and reveal a role of phase separation in mediating the apoptotic effect of Nur77 at mitochondria.

Engineering Symmetry-Breaking Centers and d-Orbital Modulation in Triatomic Catalysts for Zinc-Air Batteries.

Unraveling the configuration-activity relationship and synergistic enhancement mechanism (such as real active center, electron spin-state, and d-orbital energy level) for triatomic catalysts, as well as their intrinsically bifunctional oxygen electrocatalysis, is a great challenge. Here we present a triatomic catalyst (TAC) with a trinuclear active structure that displays extraordinary oxygen electrocatalysis for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), greatly outperforming the counterpart of single-atom and diatomic catalysts. The aqueous Zn-air battery (ZAB) equipped with a TAC-based cathode exhibits extraordinary rechargeable stability and ultrarobust cycling performance (1970 h/3940 cycles at 2 mA cm-2, 125 h/250 cycles at 10 mA cm-2 with negligible voltage decay), and the quasi-solid-state ZAB displays outstanding rechargeability and low-temperature adaptability (300 h/1800 cycles at 2 mA cm-2 at -60 °C), outperforming other state-of-the-art ZABs. The experimental and theoretical analyses reveal the symmetry-breaking CoN4 configuration under incorporation of neighboring metal atoms (Fe and Cu), which leads to d-orbital modulation, a low-shift d band center, weakened binding strength to the oxygen intermediates, and decreased energy barrier for bifunctional oxygen electrocatalysis. This rational tricoordination design as well as an in-depth mechanism analysis indicate that hetero-TACs can be promisingly applied in various electrocatalysis applications.

Efficient and Rapid Hydrogen Extraction from Ammonia-Water via Laser Under Ambient Conditions without Catalyst.

As a good carrier of hydrogen, ammonia-water has been employed to extract hydrogen in many ways. Here, we demonstrate a simple, green, ultrafast, and highly efficient method for hydrogen extraction from ammonia-water by laser bubbling in liquids (LBL) at room temperature and ambient pressure without catalyst. A maximum apparent yield of 33.7 mmol/h and a real yield of 93.6 mol/h were realized in a small operating space, which were far higher than the yields of most hydrogen evolution reactions from ammonia-water under ambient conditions. We also established that laser-induced cavitation bubbles generated a transient high temperature, which enabled a very suitable environment for hydrogen extraction from ammonia-water. The laser used here can serve as a demonstration of potentially solar-pumped catalyst-free hydrogen extraction and other chemical synthesis. We anticipate that the LBL technique will open unprecedented opportunities to produce chemicals.

Laser direct overall water splitting for H2 and H2O2 production.

Hydrogen (H2) and hydrogen peroxide (H2O2) play crucial roles as energy carriers and raw materials for industrial production. However, the current techniques for H2 and H2O2 production rely on complex catalysts and involve multiple intermediate steps. In this study, we present a straightforward, environmentally friendly, and highly efficient laser-induced conversion method for overall water splitting to simultaneously generate H2 and H2O2 at ambient conditions without any catalysts. The laser direct overall water splitting approach achieves an impressive light-to-hydrogen energy conversion efficiency of 2.1%, with H2 production rates of 2.2 mmol/h and H2O2 production rates of 65 µM/h in a limited reaction area (1 mm2) within a short real reaction time (0.36 ms/h). Furthermore, we elucidate the underlying physics and chemistry behind the laser-induced water splitting to produce H2 and H2O2. The laser-induced cavitation bubbles create an optimal microenvironment for water-splitting reactions because of the transient high temperatures (104 K) surpassing the chemical barrier required. Additionally, their rapid cooling rate (1010 K/s) hinders reverse reactions and facilitates H2O2 retention. Finally, upon bubble collapse, H2 is released while H2O2 remains dissolved in the water. Moreover, a preliminary amplification experiment demonstrates the potential industrial applications of this laser chemistry. These findings highlight that laser-based production of H2 and H2O2 from water holds promise as a straightforward, environmentally friendly, and efficient approach on an industrial scale beyond conventional chemical catalysis.

Flexible, Transparent and Conductive Metal Mesh Films with Ultra-High FoM for Stretchable Heating and Electromagnetic Interference Shielding.

Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference (EMI) shielding, achieving a flexible EMI shielding film, while maintaining a high transmittance remains a significant challenge. Herein, a flexible, transparent, and conductive copper (Cu) metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique. The Cu mesh film shows an ultra-low sheet resistance (0.18 Ω â–¡-1), high transmittance (85.8%@550 nm), and ultra-high figure of merit (> 13,000). It also has satisfactory stretchability and mechanical stability, with a resistance increases of only 1.3% after 1,000 bending cycles. As a stretchable heater (ε > 30%), the saturation temperature of the film can reach over 110 °C within 60 s at 1.00 V applied voltage. Moreover, the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5 µm. As a demonstration, it is used as a transparent window for shielding the wireless communication electromagnetic waves. Therefore, the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.

Non-Covalently Stapled H+ /Cl- Ion Channels Activatable by Visible Light for Targeted Anticancer Therapy.

The development of stimuli-responsive artificial H+ /Cl- ion channels, capable of specifically disturbing the intracellular ion homeostasis of cancer cells, presents an intriguing opportunity for achieving high selectivity in cancer therapy. Herein, we describe a novel family of non-covalently stapled self-assembled artificial channels activatable by biocompatible visible light at 442 nm, which enables the co-transport of H+ /Cl- across the membrane with H+ /Cl- transport selectivity of 6.0. Upon photoirradiation of the caged C4F-L for 10 min, 90 % of ion transport efficiency can be restored, giving rise to a 10.5-fold enhancement in cytotoxicity against human colorectal cancer cells (IC50 =8.5 µM). The mechanism underlying cancer cell death mediated by the H+ /Cl- channels involves the activation of the caspase 9 apoptosis pathway as well as the scarcely reported disruption of the autophagic processes. In the absence of photoirradiation, C4F-L exhibits minimal toxicity towards normal intestine cells, even at a concentration of 200 µM.

Exosomes from adipose-derived mesenchymal stem cells improve liver fibrosis by regulating the miR-20a-5p/TGFBR2 axis to affect the p38 MAPK/NF-κB pathway.

OBJECTIVE: Human adipose-derived mesenchymal stem cell exosomes (ADSC-Exos) are active constituents for treating liver fibrosis. This paper attempted to preliminarily explain the functional mechanism of ADSC-Exos in liver fibrosis through the p38 MAPK/NF-κB pathway. METHODS: The cell models of hepatic fibrosis were established by inducing LX-2 cells with TGF-ß1. Mouse models of liver fibrosis were established by treating mice with CCl4. The in vivo and in vitro models of liver fibrosis were treated with ADSC-Exos. ADSCs were identified by flow cytometry/Alizarin red/oil red O/alcian blue staining. ADSC-Exos were identified by transmission electron microscopy, nanoparticle tracking analysis, and Western blot. LX-2 cell proliferation/viability were evaluated by MTT/BrdU assays. Exosomes were tracked in vivo and body weight changes in mice were monitored. Hepatic pathological changes were observed by HE/Masson staining. α-SMA/collagen I levels in liver tissues were assessed by immunohistochemistry. HA/PIIINP concentrations were measured using the magnetic particle chemiluminescence method. Liver function was assessed using an automatic analyzer. miR-20a-5p level was measured by RT-qPCR. The mRNA levels of fibrosis markers were determined by RT-qPCR, and their protein levels and levels of MAPK/NF-κB pathway-related proteins, as well as TGFBR2 protein level were measured by Western blot. The P65 nuclear expression in mouse liver tissues was quantified by immunofluorescence. RESULTS: ADSC-Exos suppressed TGF-ß1-induced LX-2 cell proliferation and fibrosis and reduced mRNA and protein levels of fibrosis markers in vitro. ADSC-Exos ameliorated liver fibrosis by inhibiting the p38 MAPK/NF-κB pathway activation. ADSC-Exos inhibited activation of the p38 MAPK/NF-κB pathway via regulating the miR-20a-5p/TGFBR2 axis. The in vivo experiment asserted that ADSC-Exos were mainly distributed in the liver, and ADSC-Exos relieved liver fibrosis in mice, which was evidenced by alleviating decreased body weight, reducing collagen and enhancing liver function, and repressed the activation of the p38 MAPK/NF-κB pathway via the miR-20a-5p/TGFBR2 axis. CONCLUSION: ADSC-Exos attenuated liver fibrosis by suppressing the activation of the p38 MAPK/NF-κB pathway via the miR-20a-5p/TGFBR2 axis.

Nuclear receptor RXRα binds the precursor of miR-103 to inhibit its maturation.

BACKGROUND: The maturation of microRNAs (miRNAs) successively undergoes Drosha, Dicer, and Argonaute -mediated processing, however, the intricate regulations of the individual miRNA maturation are largely unknown. Retinoid x receptor alpha (RXRα) belongs to nuclear receptors that regulate gene transcription by binding to DNA elements, however, whether RXRα binds to miRNAs to exert physiological functions is not known. RESULTS: In this work, we found that RXRα directly binds to the precursor of miR-103 (pre-miR-103a-2) via its DNA-binding domain with a preferred binding sequence of AGGUCA. The binding of RXRα inhibits the processing of miR-103 maturation from pre-miR-103a-2. Mechanistically, RXRα prevents the nuclear export of pre-miR-103a-2 for further processing by inhibiting the association of exportin-5 with pre-miR-103a-2. Pathophysiologically, the negative effect of RXRα on miR-103 maturation correlates to the positive effects of RXRα on the expression of Dicer, a target of miR-103, and on the inhibition of breast cancer. CONCLUSIONS: Our findings unravel an unexpected role of transcription factor RXRα in specific miRNA maturation at post-transcriptional level through pre-miRNA binding, and present a mechanistic insight regarding RXRα role in breast cancer progression.

Flexible, Transparent, and Wafer-Scale Artificial Synapse Array Based on TiOx /Ti3 C2 Tx Film for Neuromorphic Computing.

A high-density neuromorphic computing memristor array based on 2D materials paves the way for next-generation information-processing components and in-memory computing systems. However, the traditional 2D-materials-based memristor devices suffer from poor flexibility and opacity, which hinders the application of memristors in flexible electronics. Here, a flexible artificial synapse array based on TiOx /Ti3 C2 Tx film is fabricated by a convenient and energy-efficient solution-processing technique, which realizes high transmittance (≈90%) and oxidation resistance (>30 days). The TiOx /Ti3 C2 Tx memristor shows low device-to-device variability, long memory retention and endurance, a high ON/OFF ratio, and fundamental synaptic behavior. Furthermore, satisfactory flexibility (R = 1.0 mm) and mechanical endurance (104 bending cycles) of the TiOx /Ti3 C2 Tx memristor are achieved, which is superior to other film memristors prepared by chemical vapor deposition. In addition, high-precision (>96.44%) MNIST handwritten digits recognition classification simulation indicates that the TiOx /Ti3 C2 Tx artificial synapse array holds promise for future neuromorphic computing applications, and provides excellent high-density neuron circuits for new flexible intelligent electronic equipment.

Laser-Induced Methanol Decomposition for Ultrafast Hydrogen Production.

Methanol (CH3OH) is a liquid hydrogen (H2) source that effectively releases H2 and is convenient for transportation. Traditional thermocatalytic CH3OH reforming reaction is used to produce H2, but this process needs to undergo high reaction temperature (e.g., 200 °C) along with a catalyst and a large amount of carbon dioxide (CO2) emission. Although photocatalysis and photothermal catalysis under mild conditions are proposed to replace the traditional thermal catalysis to produce H2 from CH3OH, they still inevitably produce CO2 emissions that are detrimental to carbon neutrality. Here, we, for the first time, report an ultrafast and highly selective production of H2 without any catalysts and no CO2 emission from CH3OH by laser bubbling in liquid (LBL) at room temperature and atmospheric pressure. We demonstrate that a super high H2 yield rate of 33.41 mmol·h-1 with 94.26% selectivity is achieved upon the laser-driven process. This yield is 3 orders of magnitude higher than the best value reported for photocatalytic and photothermal catalytic H2 production from CH3OH to date. The energy conversion efficiency of laser light to H2 and CO can be up to 8.5%. We also establish that the far from thermodynamic equilibrium state with high temperature inside the laser-induced bubble and the kinetic process of rapid quenching of bubbles play crucial roles in H2 production upon LBL. Thermodynamically, the high temperature induced using laser in bubbles ensures fast and efficient release of H2 from CH3OH decomposition. Kinetically, rapidly quenching of laser-induced bubbles can inhibit reverse reaction and can keep the products in the initial stage, which guarantees high selectivity. This study presents a laser-driven ultrafast and highly selective production of H2 from CH3OH under normal conditions beyond catalytic chemistry.

High-performance fiber-shaped Li-ion battery enabled by a surface-reinforced self-supporting electrode.

Herein, we develop a surface-reinforced self-supporting fiber electrode via the simple-yet-reliable ink-extrusion technology to introduce a thin polymer layer at the electrode surface, which endows the fiber architecture with sufficient rigidity for the subsequent fiber cell assembly. Such fiber LiFePO4//Li4Ti5O12 full cells exhibit high linear capacity output (0.144 mA h cm-1) and energy density (0.267 mW h cm-1).

Dihydrotrichodimerol Purified from the Marine Fungus Acremonium citrinum Prevents NAFLD by Targeting PPARα.

The pathogenesis of nonalcoholic fatty liver disease (NAFLD) is closely linked to the imbalance of lipid and glucose metabolism, in which peroxisome proliferator-activated receptors (PPARs) play essential roles. The clinical trials have shown the beneficial effects of the PPARs' ligands on NAFLD. In this study, we screen the extracts from the marine fungus Acremonium citrinum and identify the natural compounds dihydrotrichodimerol (L1A) and trichodimerol (L1B) as the ligands of PPARs, of which L1A is a dual PPARα/γ agonist, whereas L1B is a selective PPARγ agonist. L1A but not L1B significantly prevents hepatic lipid accumulation in an oleic acid-induced NAFLD cell model as well as in a high-fat-diet-induced NAFLD mouse model. Moreover, L1A potently inhibits hepatic steatosis in a PPARα-dependent manner in another NAFLD mouse model constructed by using a choline-deficient and amino acid-defined diet. Mechanistically, L1A transcriptionally up-regulates the expression of SIRT1 in a PPARα-dependent manner, followed by the activation of AMPK and inactivation of ACC, resulting in the inhibition of lipid anabolism and the increase of lipid catabolism. Taken together, our study reveals a dual ligand of PPARα/γ with a distinct structure and therapeutic effect on NAFLD, providing a potential drug candidate bridging the currently urgent need for the management of NAFLD.

Ultra-sensitive, Multi-directional Flexible Strain Sensors Based on an MXene Film with Periodic Wrinkles.

The fast-growing motion capturing/monitoring technique has raised a great demand for flexible strain sensors. For capturing complex motions (e.g., facial motion), both the strain amplitude and direction should be accurately detected. Although some reported sensors based on anisotropic conductive networks are proved to show accurate localization of strain directions, it is still a great challenge to achieve both high sensitivity and a high sensing range in these designs. Here, a self-assembled Ti3C2Tx MXene film with parallel and periodic wrinkles is fabricated on a stretchable poly(dimethylsiloxane) substrate for constructing multi-directional strain sensors. During stretching, relative slip and crack will occur between the stacked MXene nanosheets, which contribute to high structural sensitivity in the MXene film. Meanwhile, the wrinkled structure contributes to high stretchability. As a result, the sensor based on the film with one-dimensional periodic wrinkles shows a large sensing range (>50%) and a gauge factor of 45. Furthermore, the sensor can accurately detect both the strain amplitude and direction by using the MXene film with two-dimensional wrinkles. It shows distinguishable electrical responses when detecting different-amplitude human/robot motions such as joint bending and walking. Additionally, the directions in complex human motions (e.g., facial motion) can also be well-tracked. This work provides an effective strategy to detect multi-directional motions.

The prognostic value of RASGEF1A RNA expression and DNA methylation in cytogenetically normal acute myeloid leukemia.

BACKGROUND: Acute myeloid leukemia (AML) is a significantly heterogeneous malignancy of the blood. Cytogenetic abnormalities are crucial for the prognosis of AML. However, since more than half of patients with AML are cytogenetically normal AML (CN-AML), predictive prognostic indicators need to be further refined. In recent years, gene abnormalities are considered to be strong prognostic factors of CN-AML, already having clinical significance for treatment. In addition, the relationship of methylation in some genes and AML prognosis predicting has been discovered. RASGEF1A is a guanine nucleotide exchange factors of Ras and widely expressed in brain tissue, bone marrow and 17 other tissues. RASGEF1A has been reported to be associated with a variety of malignant tumors, examples include Hirschsprung disease, renal cell carcinoma, breast cancer, diffuse large B cell lymphoma, intrahepatic cholangiocarcinoma and so on [1, 2]. However, the relationship between the RASGEF1A gene and CN-AML has not been reported. METHODS: By integrating the Cancer Genome Atlas (TCGA) database 75 patients with CN-AML and 240 Gene Expression Omnibus (GEO) database CN-AML samples, we examined the association between RASGEF1A's RNA expression level and DNA methylation of and AML patients' prognosis. Then, we investigated the RASGEF1A RNA expression and DNA methylation's prognostic value in 77 patients with AML after allogeneic hematopoietic stem cell transplantation (Allo-HSCT) as well as 101 AML patients after chemotherapy respectively. We investigated the association between sensitivity to Crenolanib and expression level of RASGED1A in patients by integrating 191 CN-AML patients from BeatAML dadataset. We integrated the expression and methylation of RASGEF1A to predict the CN-AML patients' prognosis and investigated the relationship between prognostic of AML patients with different risk classification and expression levels or methylation levels of RASGEF1A. RESULTS: We found that RASGEF1A gene high expression group predicted poorer event-free survival (EFS) (P< 0.0001) as well as overall survival (OS) (P< 0.0001) in CN-AML samples, and the identical results were found in AML patients receiving chemotherapy (P< 0.0001) and Allo-HSCT (P< 0.0001). RASGEF1A RNA expression level is an CN-AML patients' independent prognostic factor (EFS: HR = 5.5534, 95% CI: 1.2982-23.756, P= 0.0208; OS: HR = 5.3615, 95% CI: 1.1014-26.099, P= 0.0376). The IC50 (half maximal inhibitory concentration) of Crenolanib of CN-AML samples with RASGEF1A high expression level is lower. In addition, patients with high RASGEF1A methylation level had significant favorable prognosis (EPS: P< 0.0001, OS: P< 0.0001). Furthermore, the integrative analysis of expression and methylation of RASGEF1A could classify CN-AML patients into subgroups with different prognosis (EFS: P= 0.034, OS: P= 0.0024). Expression levels or methylation levels of RASGEF1A help to improve risk classification of 2010 European Leukemia Net. CONCLUSION: Higher RASGEF1A RNA expression and lower DNA methylation predicts CN-AML patients' poorer prognosis. The RASGEF1A high expression level from patients with CN-AML have better sensitivity to Crenolanib. The integrative analysis of RASGEF1A RNA expression and DNA methylation can provide a more accurate classification for prognosis. Lower RASGEF1A expression is a favorable prognostic factor for AML patients receiving chemotherapy or Allo-HSCT. 2010 European Leukemia Net's risk classification can be improved by RASGEF1A expression levels or methylation levels.