Metal-Free Electron Donor-Acceptor Pair Enabled Long-Term Stability of Li-CO2 Battery.

The challenges of Lithium-carbon dioxide (Li-CO2) batteries for ensuring long-term cycling stability arise from the thermodynamically stable and electrically insulating discharge products (e.g., Li2CO3), which primarily rely on their interaction with the active materials. To achieve the optimized intermediates, the bifunctional electron donor-acceptor (D-A) pairs are proposed in cathode design to adjust such interactions in the case of B-O pairs. The inclusion of BC2O sites allows for the optimized redistribution of electrons via p-π conjugation. The as-obtained DO-AB pairs endow the enhanced interactions with Li+, CO2, and various intermediates, accompanied by the adjustable growth mode of Li2CO3. The shift from solvation-mediated mode into surface absorption mode in turn manipulates the morphology and decomposition kinetics of Li2CO3. Therefore, the corresponding Li-CO2 battery got twofold improved in both the capacity and reversibility. The cycling prolongs exceed 1300 h and well operates at a wide temperature range (20-50 °C) and different folding angles (0-180°). Such a strategy of introducing electron donor-acceptor pairs provides a distinct direction to optimize the lifetime of Li-CO2 battery from local structure regulation at the atomic scale, further inspiring in-depth understandings for developing electrochemical energy storage and carbon capture technologies.

Regulating Local Atomic Environment around Vacancies for Efficient Hydrogen Evolution.

Defect engineering is essential for the development of efficient electrocatalysts at the atomic level. While most work has focused on various vacancies as effective catalytic modulators, little attention has been paid to the relation between the local atomic environment of vacancies and catalytic activities. To face this challenge, we report a facile synthetic approach to manipulate the local atomic environments of vacancies in MoS2 with tunable Mo-to-S ratios. Our studies indicate that the MoS2 with more Mo terminated vacancies exhibits better hydrogen evolution reaction (HER) performance than MoS2 with S terminated vacancies and defect-free MoS2. The improved performance originates from the adjustable orbital orientation and distribution, which is beneficial for regulating H adsorption and eventually boosting the intrinsic per-site activity. This work uncovers the underlying essence of the local atomic environment of vacancies on catalysis and provides a significant extension of defect engineering for the rational design of transition metal dichalcogenides (TMDs) catalysts and beyond.

Cu-MOFs based photocatalyst triggered antibacterial platform for wound healing: 2D/2D Schottky junction and DFT calculation.

Herein, we developed a multimodal antibacterial nanoplatform via synergism effect including knife-effect, photothermal, photocatalytic induced reactive oxygen species (ROS), and Cu2+ inherent attribute. Typically, 0.8-TC/Cu-NS possesses higher photothermal property with the higher photothermal conversion efficiency of 24% and the moderate temperature up to 97 °C. Meanwhile, 0.8-TC/Cu-NS exhibits the more active ROS, 1O2 and ·O2-. Hence, 0.8-TC/Cu-NS possesses best antibacterial properties against S. aureus and E. coli in vitro with efficiency of 99.94%/99.97% under near-infrared (NIR) light, respectively. In the therapeutic practical use for wound healing of Kunming mice, this system exhibits outstanding curing capacity and good biocompatibility. Based on the electron configuration measurement and density functional theory (DFT) simulation, it is confirmed that the electrons on CB of Cu-TCPP flow fleetingly to MXene trough the interface, with redistribution of charge and band upward bending over Cu-TCPP. As a result, the self-assembled 2D/2D interfacial Schottky junction have made great favor to accelerate photogenerated charges mobility, hamper charge recombination, and increases the photothermal/photocatalytic activity. This work gives us a hint to mostly design the multimodal synergistic nanoplatform under NIR light in biological applications without drug resistance.

Ultrafast Superfilling Construction of a Metal Artificial Interface for Long-Term Stable Zinc Anodes.

Zinc (Zn)-metal anodes are promising candidates for large-scale, highly safe energy-storage systems. However, their cycling life is associated with instability issues such as dendritic growth, corrosion, and hydrogen evolution. Introducing an artificial metal interface is expected to help overcome this challenge owing to the optimization of the absorption, nucleation, and growth of Zn2+ . In this study, an ultrafast, universal, and cost-effective superfilling approach is developed to construct a metal artificial interface decorated Zn anode in situ. Most zincophilic metals, including Sn, Cu, and Ag, can be used to construct a homogenous interface without any restrictions on the size, morphology, or curvature of the substrates. With Sn as a proof-of-concept demonstration, the as-obtained Sn@Zn anode is conducive for the homogenous Zn nuclei and 2D diffusion of Zn2+ ions. Symmetric cells with Sn@Zn electrodes can be operated for over 900 h at different current densities. This superior performance contributes to the attractive electrochemical characteristics of both coin and scaled-up Sn@Zn//ß-MnO2 cells. Given the facile and cost-effective fabrication and recyclability of the cells, this work enables the efficient design and exploration of Zn anodes for research, industrialization, and commercialization purposes.

Metallic Carbonitride MXene Based Photonic Hyperthermia for Tumor Therapy.

Photothermal therapy (PTT) as a noninvasive hyperthermia exhibits high potential for anti-cancer treatments. The explosion of efficient photothermal agents (PTAs) keeps developing rapidly. MXene stands out due to its intriguing structures, fantastic photodynamic properties, and good biocompatibility. However, the potential of MXenes has not been sufficiently explored in PTT. Its versatile chemical compositions of MXenes provide vast opportunities to discover new candidates. Considering that the metallic feature is mainly attributed to the metal element, anionic modulation may open a distinct avenue to propel efficient PTAs with metallic nature, which is expected for high light-harvesting over near-infrared (NIR)-I and NIR-II. As a paradigm, metal carbonitride is chosen to visualize the influences of anionic modulation. Taking advantage of electron injection from nitrogen, the distinct carbonitride Ti3 C1.15 N0.85 F0.88 O0.56 (OH)0.56 exhibits a strong NIR absorption (36.6 L g-1 cm-1 at 808 nm, 43.5 L g-1 cm-1 at 1064 nm), resulting in efficient photonic hyperthermia against tumors in vitro and in vivo. Looking through a large family of MXenes, this proof-of-principle demonstration offers a deep understanding between atomic composition and physicochemical properties, which further solidifies MXenes with all the potential for biomedical applications.

Graphdiyne-supported single-cluster electrocatalysts for highly efficient carbon dioxide reduction reaction.

The electrochemical CO2 reduction reaction (CO2RR) has become a promising technology to resolve globally accelerating CO2 emissions and produce chemical fuels. In this work, the electrocatalytic performance of transition metal (TM = Cu, Cr, Mn, Co, Ni, Mo, Pt, Rh, Ru and V) triatomic clusters embedded in a graphdiyne (GDY) monolayer (TM3@GDY) for CO2RR is investigated by density functional theory (DFT) calculations. The results indicate that Cr3@GDY possesses the best catalytic performance with a remarkably low rate-limiting step of 0.39 eV toward the CO2 product, and it can also effectively suppress the hydrogen evolution reaction (HER) during the entire CO2RR process. Studies on the rate-limiting steps (CHO* + H+ + e- → CHOH) of Crn@GDY (n = 1-4) structures demonstrate that the high catalytic performance is attributed to the strong synergistic reaction of three Cr atoms interacting with the C atom for the Cr3@GDY structure. The strong synergistic reaction gives rise to the weakest interaction between O-Cr atoms, which leads to the strongest interaction between O-H atoms and makes the hydrogenation process easier for the Cr3@GDY structure. Furthermore, ab initio molecular dynamics simulations (AIMD) at 500 K reveal the high thermodynamic stability of the Cr3@GDY structure. These studies may provide a new approach for designing highly efficient electrocatalysts for the CO2RR under ambient conditions.

Ultrafast Universal Fabrication of Metal-Organic Complex Nanosheets by Joule Heating Engineering.

Two-dimensional metal-organic complex (MOC) nanosheets are of great interest in various areas. Current strategies applied to synthesize MOC nanosheets are suffering from low yield, usage of large amounts of environmentally unfriendly organic solvent, are time and energy consuming, and cumbersome steps for 2D nanostructures. In this work, a novel joule heating mechanism is proposed to fabricate MOC nanosheets about 5 nm in thickness with tunable metal compositions (i.e. M = Co, CoNi, and CoFe) within 60 s. Small amount of water is used as the only solvent. Under the intense irradiation of the microwave, fast heating via ionic conduction loss is realized, and urea is catalytically condensed into the long-chain organic ligands rich in N atoms that are capable of coordinating with metal ions to form the stubborn MOC framework, which is simultaneously puffed into an ultrathin nanosheet structure by the intensive release of gas. As a proof of concept, the as-synthesized Co-MOC nanosheet exhibits a superior lithium storage performance of 360 and 330 mA h g-1 after 1200 and 2300 cycles at a current density of 500 and 1000 mA g-1 , respectively.

Termination effects of single-atom decorated v-Mo2CTx MXene for the electrochemical nitrogen reduction reaction.

The lack of the green, economical and high-efficient catalysts restrict the development of electrochemical nitrogen reduction reaction (NRR). By means of density functional theory (DFT) calculations, we have systematically investigated the NRR catalytic performance of single atoms decorated v-Mo2CT2 (T = O, F, OH, Cl, and Li) MXene (TM@v-Mo2CT2). Our calculation results reveal the introduction of single atom can significantly improve the NRR activity and selectivity on v-Mo2CO2, and Ir@v-Mo2CO2 system possesses the lowest limiting potential of only -0.33 V among all studied systems. The termination effects of TM@v-Mo2CT2 are further discussed and a descriptor of the adsorption energy of *NNH species (ΔE(*NNH)) is proposed to establish the relationship with NRR limiting potential (UL(NRR)), in which a moderate (ΔE(*NNH)) is required for high NRR activity. Moreover, a good linear relationship between the ΔE(*NNH) and the excess electrons on Ir atom shows that different ΔE(*NNH) originates from the difference of valence state of Ir atom, which is due to the change of coordination environment. Importantly, the synergistic effects of Ir atom and the surface O-terminations during the first hydrogenation step lead to a promoted NRR performance. Our study might provide new possibilities for rational design of cost-effective MXene-based NRR electrocatalysts.

A DFT screening of single transition atoms supported on MoS2 as highly efficient electrocatalysts for the nitrogen reduction reaction.

The development of low-cost and highly efficient materials for the electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions is an attractive and challenging topic in chemistry. In this study, the electrocatalytic performance of a series of transition metal (TM) atoms supported on MoS2 nanosheets (TM@MoS2) was systematically investigated using density functional theory (DFT) calculations. It was found that Re supported on MoS2 (Re@MoS2) has the best NRR catalytic activity with a limiting potential of -0.43 V, along with high selectivity over the competing hydrogen evolution reaction (HER). Moreover, the ab initio molecular dynamics (AIMD) simulations at 500 K and density of states (DOS) calculations indicated the high thermodynamic stability and excellent electrical conductivity of Re@MoS2. A linear trend between several parameters of single atom catalysts (SACs) and the adsorption Gibbs free energy change of the NH species (ΔG*NH) was observed, indicating the later as a simple descriptor for the facilitated screening of novel SACs. These results pave the way for exploring novel, highly efficient electrocatalysts for the electrochemical NRR under ambient conditions.

A molecular device providing a remarkable spin filtering effect due to the central molecular stretch caused by lateral zigzag graphene nanoribbon electrodes.

Through the density functional theory, we studied molecular devices composed of single tetrathiafulvalene (TTF) molecules connected with zigzag graphene nanoribbon electrodes by four different junctions. Interestingly, some devices have exhibited half-metallic behavior and can bring out a perfect spin filtering effect and remarkable negative differential resistance behavior. The current-voltage characteristics show that these four devices possess different spin current values. We found that all the TTF molecules were stretched due to interactions with the electrodes in the four devices. This leads to the Fermi levels of the three devices being down-shifted to the valence band; therefore, these devices exhibit half-metallic properties. The underlying mechanisms of the different spin current values are attributed to the different electron transmission pathways (via chemical bonds or through hopping between atoms). These results suggest that the device properties and conductance are controlled by different junctions. Our work predicts an effective way for designing high-performance spin-injected molecular devices.

DBD Plasma Combined with Different Foam Metal Electrodes for CO2 Decomposition: Experimental Results and DFT Validations.

In the last few years, due to the large amount of greenhouse gas emissions causing environmental issue like global warming, methods for the full consumption and utilization of greenhouse gases such as carbon dioxide (CO2) have attracted great attention. In this study, a packed-bed dielectric barrier discharge (DBD) coaxial reactor has been developed and applied to split CO2 into industrial fuel carbon monoxide (CO). Different packing materials (foam Fe, Al, and Ti) were placed into the discharge gap of the DBD reactor, and then CO2 conversion was investigated. The effects of power, flow velocity, and other discharge characteristics of CO2 conversion were studied to understand the influence of the filling catalysts on CO2 splitting. Experimental results showed that the filling of foam metals in the reactor caused changes in discharge characteristics and discharge patterns, from the original filamentary discharge to the current filamentary discharge as well as surface discharge. Compared with the maximum CO2 conversion of 21.15% and energy efficiency of 3.92% in the reaction tube without the foam metal materials, a maximum CO2 decomposition rate of 44.84%, 44.02%, and 46.61% and energy efficiency of 6.86%, 6.19%, and 8.85% were obtained in the reaction tubes packed with foam Fe, Al, and Ti, respectively. The CO2 conversion rate for reaction tubes filled with the foam metal materials was clearly enhanced compared to the non-packed tubes. It could be seen that the foam Ti had the best CO2 decomposition rate among the three foam metals. Furthermore, we used density functional theory to further verify the experimental results. The results indicated that CO2 adsorption had a lower activation energy barrier on the foam Ti surface. The theoretical calculation was consistent with the experimental results, which better explain the mechanism of CO2 decomposition.