Sapphire-Based Optrode for Low Noise Neural Recording and Optogenetic Manipulation.

Electrophysiological recordings of neurons in deep brain regions using optogenetic stimulation are essential to understanding and regulating the role of complex neural activity in biological behavior and cognitive function. Optogenetic techniques have significantly advanced neuroscience research by enabling the optical manipulation of neural activities. Because of the significance of the technique, constant advancements in implantable optrodes that integrate optical stimulation with low-noise, large-scale electrophysiological recording are in demand to improve the spatiotemporal resolution for various experimental designs and future clinical applications. However, robust and easy-to-use neural optrodes that integrate neural recording arrays with high-intensity light emitting diodes (LEDs) are still lacking. Here, we propose a neural optrode based on Gallium Nitride (GaN) on sapphire technology, which integrates a high-intensity blue LED with a 5x2 recording array monolithically for simultaneous neural recording and optogenetic manipulation. To reduce the noise interference between the recording electrodes and the LED, which is in close physical proximity, three metal grounding interlayers were incorporated within the optrode, and their ability to reduce LED-induced artifacts during neural recording was confirmed through both electromagnetic simulations and experimental demonstrations. The capability of the sapphire optrode to record action potentials has been demonstrated by recording the firing of mitral/tuft cells in the olfactory bulbs of mice in vivo. Additionally, the elevation of action potential firing due to optogenetic stimulation observed using the sapphire probe in medial superior olive (MSO) neurons of the gerbil auditory brainstem confirms the capability of this sapphire optrode to precisely access neural activities in deep brain regions under complex experimental designs.

An Integrated Neural Optrode with Modification of Polymer-Carbon Composite Films for Suppression of the Photoelectric Artifacts.

Optogenetics-based integrated photoelectrodes with high spatiotemporal resolution play an important role in studying complex neural activities. However, the photostimulation artifacts caused by the high level of integration and the high impedance of metal recording electrodes still hinder the application of photoelectrodes for optogenetic studies of neural circuits. In this study, a neural optrode fabricated on sapphire GaN material was proposed, and 4 µLEDs and 14 recording microelectrodes were monolithically integrated on a shank. Poly(3,4-ethylenedioxythiophene)/polystyrenesulfonate and multiwalled carbon nanotubes (PEDOT:PSS-MWCNT) and poly(3,4-ethylenedioxythiophene) and graphene oxide (PEDOT-GO) composite films were deposited on the surface of the recording microelectrode by electrochemical deposition. The results demonstrate that compared with the gold microelectrode, the impedances of both composite films reduced by more than 98%, and the noise amplitudes decreased by 70.73 and 87.15%, respectively, when exposed to light stimulation. Adjusting the high and low levels, we further reduced the noise amplitude by 48.3%. These results indicate that modifying the electrode surface by a polymer composite film can effectively enhance the performance of the microelectrode and further promote the application of the optrode in the field of neuroscience.

Asymmetric Structural Engineering of Hot-Exciton Emitters Achieving a Breakthrough in Non-Doped BT.2020 Blue OLEDs with a Record 9.5% External Quantum Efficiency.

High-efficiency non-doped deep-blue organic light-emitting diodes (OLEDs) meeting the standard of BT.2020 color gamut is desired but rarely reported. Herein, an asymmetric structural engineering based on crossed long-short axis (CLSA) strategy is developed to obtain three new deep-blue emitters (BICZ, PHDPYCZ, and PHPYCZ) with a hot-exciton characteristic. Compared to 2BuCz-CNCz featuring a symmetric single hole-transport framework, these asymmetric emitters with the introduction of different electron-transport units show the enhancement of photoluminescence efficiency and improvement of bipolar charge transport capacity. Further combined with high radiative exciton utilization efficiency and light outcoupling efficiency, the non-doped OLED based on PHPYCZ exhibits the best performance with an excellent current efficiency of 3.49%, a record-high maximum external quantum efficiency of 9.5%, and a CIE y coordinate of 0.049 approaching the BT.2020 blue point. The breakthrough obtained in this work can inspire the molecular design of deep-blue emitters for high-performance non-doped BT.2020 blue OLEDs.

Thermal Analysis of THz Schottky Diode Chips with Single and Double-Row Anode Arrangement.

GaN Schottky diodes show great potential in high-power terahertz frequency multipliers. The thermal characteristics of GaN Schottky diodes with single and double-row anode arrangements are described in this paper. The temperature distribution inside the Schottky diode is discussed in detail under the coupling condition of Joule heat and solid heat transfer. The effects of different substrates and substrate geometric parameters on the thermal characteristics of the Schottky diode chips with single and double-row anode arrangements are systematically analyzed. Compared with that of the chip with single-row anode arrangement, the maximum temperature of the chip with double-row anode arrangement can be reduced by 40 K at the same conditions. For chips with different substrates, chips with diamond substrates can withstand greater power dissipation when reaching the same temperature. The simulation results are instructive for the design and optimization of Schottky diodes in the terahertz field.

Quantized Microcavity Polariton Lasing Based on InGaN Localized Excitons.

Exciton-polaritons, which are bosonic quasiparticles with an extremely low mass, play a key role in understanding macroscopic quantum effects related to Bose-Einstein condensation (BEC) in solid-state systems. The study of trapped polaritons in a potential well provides an ideal platform for manipulating polariton condensates, enabling polariton lasing with specific formation in k-space. Here, we realize quantized microcavity polariton lasing in simple harmonic oscillator (SHO) states based on spatial localized excitons in InGaN/GaN quantum wells (QWs). Benefiting from the high exciton binding energy (90 meV) and large oscillator strength of the localized exciton, room-temperature (RT) polaritons with large Rabi splitting (61 meV) are obtained in a strongly coupled microcavity. The manipulation of polariton condensates is performed through a parabolic potential well created by optical pump control. Under the confinement situation, trapped polaritons are controlled to be distributed in the selected quantized energy sublevels of the SHO state. The maximum energy spacing of 11.3 meV is observed in the SHO sublevels, indicating the robust polariton trapping of the parabolic potential well. Coherent quantized polariton lasing is achieved in the ground state of the SHO state and the coherence property of the lasing is analyzed through the measurements of spatial interference patterns and g(2)(τ). Our results offer a feasible route to explore the manipulation of macroscopic quantum coherent states and to fabricate novel polariton devices towards room-temperature operations.

Detection of HER-3 with an AlGaN/GaN-Based Ion-Sensitive Heterostructure Field Effect Transistor Biosensor.

Human epidermal growth factor receptor-3 (HER-3) plays a key role in the growth and metastasis of cancer cells. The detection of HER-3 is very important for early screening and treatment of cancer. The AlGaN/GaN-based ion-sensitive heterostructure field effect transistor (ISHFET) is sensitive to surface charges. This makes it a promising candidate for the detection of HER-3. In this paper, we developed a biosensor for the detection of HER-3 with AlGaN/GaN-based ISHFET. The AlGaN/GaN-based ISHFET biosensor exhibits a sensitivity of 0.53 ± 0.04 mA/dec in 0.01 M phosphate buffer saline (1× PBS) (pH = 7.4) solution with 4% bovine serum albumin (BSA) at a source and drain voltage of 2 V. The detection limit is 2 ng/mL. A higher sensitivity (2.20 ± 0.15 mA/dec) can be achieved in 1× PBS buffer solution at a source and drain voltage of 2 V. The AlGaN/GaN-based ISHFET biosensor can be used for micro-liter (5 µL) solution measurements and the measurement can be performed after incubation of 5 min.

Double-Sided Sapphire Optrodes with Conductive Shielding Layers to Reduce Optogenetic Stimulation Artifacts.

Optrodes, which are single shaft neural probes integrated with microelectrodes and optical light sources, offer a remarkable opportunity to simultaneously record and modulate neural activities using light within an animal's brain; however, a common problem with optrodes is that stimulation artifacts can be observed in the neural recordings of microelectrodes when the light source on the optrode is activated. These stimulation artifacts are undesirable contaminants, and they cause interpretation complexity when analyzing the recorded neural activities. In this paper, we tried to mitigate the effects of the stimulation artifacts by developing a low-noise, double-sided optrode integrated with multiple Electromagnetic Shielding (EMS) layers. The LED and microelectrodes were constructed separately on the top epitaxial and bottom substrate layers, and EMS layers were used to separate the microelectrodes and LED to reduce signal cross-talks. Compared with conventional single-sided designs, in which the LED and microelectrodes are constructed on the same side, our results indicate that double-sided optrodes can significantly reduce the presence of stimulation artifacts. In addition, the presence of stimulation artifacts can further be reduced by decreasing the voltage difference and increasing the rise/fall time of the driving LED pulsed voltage. With all these strategies, the presence of stimulation artifacts was significantly reduced by ~76%. As well as stimulation suppression, the sapphire substrate also provided strong mechanical stiffness and support to the optrodes, as well as improved electronic stability, thus making the double-sided sapphire optrodes highly suitable for optogenetic neuroscience research on animal models.

120 GHz Frequency-Doubler Module Based on GaN Schottky Barrier Diode.

Traditional GaAs-based frequency multipliers still exhibit great challenges to meet the demand for solid-state high-power THz sources due to low breakdown voltage and heat dissipation of the Schottky barrier diode (SBD). In this study, a GaN SBD chain was fabricated with n-/n+-GaN structure. As a consequence, the breakdown voltage of 54.9 V at 1 µA and cut-off frequency of 587.5 GHz at zero bias were obtained. A 120 GHz frequency-doubler module based on the GaN SBD chain was designed and fabricated. When driven with 500 mW input power in a continuous wave, the output power of the frequency-doubler module was 15.1 mW at 120 GHz. Moreover, the experiments show that the frequency-doubler module can endure an input power of 2 W. In addition, it is worth noting that the SBD chain works well at an anode temperature of 337.2 °C.

Superfluorescence of Sub-Band States in C-Plane In0.1Ga0.9N/GaN Multiple-QWs.

Superfluorescence is a collective emission from quantum coherent emitters due to quantum fluctuations. This is characterized by the existence of the delay time (τD) for the emitters coupling and phase-synchronizing to each other spontaneously. Here we report the observation of superfluorescence in c-plane In0.1Ga0.9N/GaN multiple-quantum wells by time-integrated and time-resolved photoluminescence spectroscopy under higher excitation fluences of the 267 nm laser and at room temperature, showing a characteristic τD from 79 ps to 62 ps and the ultrafast radiative decay (7.5 ps) after a burst of photons. Time-resolved traces present a small quantum oscillation from coupled In0.1Ga0.9N/GaN multiple-quantum wells. The superfluorescence is attributed to the radiative recombination of coherent emitters distributing on strongly localized subband states, Ee1→Ehh1 or Ee1→Elh1 in 3nm width multiple-quantum wells. Our work paves the way for deepening the understanding of the emission mechanism in the In0.1Ga0.9N/GaN quantum well at a higher injected carrier density.

A ceRNA network mediated by LINC00475 in papillary thyroid carcinoma.

Papillary thyroid carcinoma (PTC) is the most frequent histological type of differentiated thyroid carcinoma. Long noncoding RNAs (lncRNAs) have been widely reported to play a key role in human malignancies, and PTC is included. This study aimed to find out the functions and mechanism of lncRNA LINC00475 in PTC. LINC00475 was upregulated in PTC cells and was mainly located in the cytoplasm according to reverse-transcription polymerase chain reaction analyses and subcellular fractionation assays. As shown by cell counting kit-8 assays, ethynyl deoxyuridine incorporation assays, wound healing assays, and transwell assays, LINC00475 knockdown suppressed cell viability, proliferation, migration, and invasion. Mechanistically, LINC00475 upregulated the expression of messenger RNA zinc finger CCHC-type containing 12 (ZCCHC12) by binding to miR-376c-3p. ZCCHC12 was a direct target gene of miR-376c-3p in PTC cells. The relationship between miR-376c-3p and LINC00475 (or ZCCHC12) in PTC cells was probed by luciferase reporter assays, RNA pulldown assays, and RNA immunoprecipitation assays. In addition, both mRNA and protein levels of ZCCHC12 were downregulated due to miR-376c-3p overexpression or LINC00475 silencing. ZCCHC12 overexpression partially reversed the suppressive effect of LINC00475 knockdown on malignant behaviors of PTC cells. In conclusion, LINC00475 promotes PTC cell proliferation, migration, and invasion by upregulating ZCCHC12 via the interaction with miR-376c-3p.

Influence of the Surface Material and Illumination upon the Performance of a Microelectrode/Electrolyte Interface in Optogenetics.

Integrated optrodes for optogenetics have been becoming a significant tool in neuroscience through the combination of offering accurate stimulation to target cells and recording biological signals simultaneously. This makes it not just be widely used in neuroscience researches, but also have a great potential to be employed in future treatments in clinical neurological diseases. To optimize the integrated optrodes, this paper aimed to investigate the influence of surface material and illumination upon the performance of the microelectrode/electrolyte interface and build a corresponding evaluation system. In this work, an integrated planar optrode with a blue LED and microelectrodes was designed and fabricated. The charge transfer mechanism on the interface was theoretically modeled and experimentally verified. An evaluation system for assessing microelectrodes was also built up. Using this system, the proposed model of various biocompatible surface materials on microelectrodes was further investigated under different illumination conditions. The influence of illumination on the microelectrode/electrolyte interface was the cause of optical artifacts, which interfere the biological signal recording. It was found that surface materials had a great effect on the charge transfer capacity, electrical stability and recoverability, photostability, and especially optical artifacts. The metal with better charge transfer capacity and electrical stability is highly possible to have a better performance on the optical artifacts, regardless of its electrical recoverability and photostability under the illumination conditions of optogenetics. Among the five metals used in our investigation, iridium served as the best surface material for the proposed integrated optrodes. Thus, optimizing the surface material for optrodes could reduce optical interference, enhance the quality of the neural signal recording for optogenetics, and thus help to advance the research in neuroscience.

Psychological effect of comprehensive nursing intervention in elderly patients with perforated peptic ulcer: A protocol of systematic review.

BACKGROUND: This study aims to assess the psychological effect of comprehensive nursing intervention (CNI) in elderly patients with perforated peptic ulcer (PPU). METHODS: This protocol will search all potential studies from inception to the present in electronic database sources (Cochrane Library, PUBMED, EMBASE, PsycINFO, WANGFANG, CBM, and CNKI), and other sources (such as clinical trial registry, and conference proceedings). We will not apply limitations to language and publication status. Two independent authors will scan literature, extract data, and appraise study quality. A third author will be invited to solve any disagreements between 2 authors. We will utilize RevMan 5.3 software for statistical analysis. If necessary, we will also carry out subgroup group, sensitivity analysis, and reporting bias. RESULTS: This protocol will summarize high quality evidence to evaluate the psychological effect of CNI in elderly patients with PPU. CONCLUSION: The results of this study may provide evidence to determine whether CNI is effective or not on psychological effect in elderly patients with PPU. STUDY REGISTRATION: INPLASY202080069.