Integrating intratumoral and peritumoral radiomics with deep transfer learning for DCE-MRI breast lesion differentiation: A multicenter study comparing performance with radiologists.

PURPOSE: To conduct the fusion of radiomics and deep transfer learning features from the intratumoral and peritumoral areas in breast DCE-MRI images to differentiate between benign and malignant breast tumors, and to compare the diagnostic accuracy of this fusion model against the assessments made by experienced radiologists. MATERIALS AND METHODS: This multi-center study conducted a retrospective analysis of DCE-MRI images from 330 women diagnosed with breast cancer, with 138 cases categorized as benign and 192 as malignant. The training and internal testing sets comprised 270 patients from center 1, while the external testing cohort consisted of 60 patients from center 2. A fusion feature set consisting of radiomics features and deep transfer learning features was constructed from both intratumoral (ITR) and peritumoral (PTR) areas. The Least absolute shrinkage and selection operator (LASSO) based support vector machine was chosen as the classifier by comparing its performance with five other machine learning models. The diagnostic performance and clinical usefulness of fusion model were verified and assessed through the area under the receiver operating characteristics (ROC) and decision curve analysis. Additionally, the performance of the fusion model was compared with the diagnostic assessments of two experienced radiologists to evaluate its relative accuracy. The study strictly adhered to CLEAR and METRICS guidelines for standardization to ensure rigorous and reproducible methods. RESULTS: The findings show that the fusion model, utilizing radiomics and deep transfer learning features from the ITR and PTR, exhibited exceptional performance in classifying breast tumors, achieving AUCs of 0.950 in the internal testing set and 0.921 in the external testing set. This performance significantly surpasses that of models relying on singular regional radiomics or deep transfer learning features alone. Moreover, the fusion model demonstrated superior diagnostic accuracy compared to the evaluations conducted by two experienced radiologists, thereby highlighting its potential to support and enhance clinical decision-making in the differentiation of benign and malignant breast tumors. CONCLUSION: The fusion model, combining multi-regional radiomics with deep transfer learning features, not only accurately differentiates between benign and malignant breast tumors but also outperforms the diagnostic assessments made by experienced radiologists. This underscores the model's potential as a valuable tool for improving the accuracy and reliability of breast tumor diagnosis.

Eutectogel Electrolyte Constructs Robust Interfaces for High-Voltage Safe Lithium Metal Battery.

Dramatic growth of lithium dendrite, structural deterioration of LiCoO2 (LCO) cathode at high voltages, and unstable electrode/electrolyte interfaces pose significant obstacles to the practical application of high-energy-density LCO||Li batteries. In this work, a novel eutectogel electrolyte is developed by confining the nonflammable eutectic electrolyte in a polymer matrix. The eutectogel electrolyte can construct a robust solid electrolyte interphase (SEI) with inorganic-rich LiF and Li3N, contributing to a uniform Li deposition. Besides, the severe interface side reactions between LCO cathode and electrolyte can be retarded with an in situ formed protective layer. Correspondingly, Li||Li symmetrical cells achieve highly reversible Li plating/stripping over 1000 h. The LCO||Li full cell can maintain 72.5% capacity after 1500 cycles with a decay rate of only 0.018% per cycle at a high charging voltage of 4.45 V. Moreover, the well-designed eutectogel electrolyte can even enable the stable operation of LCO at an extremely high cutoff voltage of 4.6 V. This work introduces a promising avenue for the advancement of eutectogel electrolytes, the nonflammable nature and well-regulated interphase significantly push forward the future application of lithium metal batteries and high-voltage utilization of LCO cathode.

Extraction process and characterization of Taraxacum kok-saghyz (TKS) latex.

Taraxacum kok-saghyz (TKS) latex is a natural latex produced from its root, and its extraction optimization process is mainly studied in the present paper. The composition of fresh roots of TKS was quantitatively analyzed, and the results showed that the moisture content of the fresh root was approximately 70 %, and the rubber content averaged to 6 % (dry weight ratio). An optimal process route for extracting the TKS latex was finally determined, making the extraction efficiency reach about 80 %, and a new latex extraction process was established and optimized and named "the process of Buffer Extraction TKS Latex (BETL)". Hevea latex, extracted TKS latex and TKS latex collected directly from the broken roots were compared for study. The results showed that, like Hevea latex, the appearance of TKS latex was milky white; and after centrifugation, both showed four layers from top to bottom: rubber particles, Frey-Wyssling particles, C-serum and lutoids. The results of the composition analysis showed that the concentration of TKS latex ranged from 54.54 % to 68.25 %, which is close to that of concentrated Hevea latex; the moisture content of TKS latex was between 31.75 % and 45.46 %. The protein content of TKS latex was 13.51 mg/mL, which was lower than that of Hevea latex at the same rubber hydrocarbon concentration. The molecular structures and properties of Hevea latex, the extracted TKS latex, and the collected TKS latex were characterized by FTIR, 13C NMR, GPC, TG, SEM and LPSA, and the results showed that the main components and structure of the three latexes were similar, which are all cis-1,4-polyisoprene, and include the proteins and lipids. The distributions molecular weights of the three latexes all showed a bimodal distribution, but the molecular weight of the latex collected from TKS was lower, which indicates the larger molecules were difficult to flow outside the root automatically. The Hevea latex and TKS latex rubber particles were both core-shell structure and the size distribution were bimodal, which was consistent with the GPC analysis results.

Restraint Stress, Foot Shock and Corticosterone Differentially Alter Autophagy in the Rat Hippocampus, Basolateral Amygdala and Prefrontal Cortex.

Autophagy is a conserved lysosomal degradation process that has recently been found to be associated with stress-related psychological diseases. However, previous studies have yielded inconsistent results regarding the effects of various stress patterns on autophagy in different brain regions. This discrepancy may arise from differences in autophagy flux across nuclei, the type of stress experienced, and the timing of autophagy assessment after stress exposure. In this study, we assessed autophagy flux in the rat hippocampus (HPC), medial prefrontal cortex (mPFC), and basal lateral amygdala (BLA) by quantifying protein levels of p-ULK1, LC3-I, LC3-II, and p62 via Western blot analysis at 15 min, 30 min, and 60 min following various stress paradigms: restraint stress, foot shock, single corticosterone injection, and chronic corticosterone treatment. We found that: (1) hippocampal autophagy decreased within 1 h of restraint stress, foot shock, and corticosterone injection, except for a transient increase at 30 min after restraint stress; (2) autophagy increased 1 h after restraint stress and corticosterone injection but decreased 1 h after foot shock in mPFC; (3) In BLA, autophagy increased 1 h after foot shock and corticosterone injection but decreased 1 h after restraint stress; (4) Chronic corticosterone increased autophagy in mPFC and BLA but had no effects in HPC. These findings suggest that stress regulates autophagy in a brain region- and stressor-specific manner within 1 h after stress exposure, which may contribute to the development of stress-related psychological disorders.

A promising perovskite primary explosive.

A primary explosive is an ideal chemical substance for performing ignition in military and commercial applications. For over 150 years, nearly all of the developed primary explosives have suffered from various issues, such as troublesome syntheses, high toxicity, poor stability or/and weak ignition performance. Now we report an interesting example of a primary explosive with double perovskite framework, {(C6H14N2)2[Na(NH4)(IO4)6]}n (DPPE-1), which was synthesized using a simple green one-pot method in an aqueous solution at room temperature. DPPE-1 is free of heavy metals, toxic organic components, and doesn't involve any explosive precursors. It exhibits good stability towards air, moisture, sunlight, and heat and has acceptable mechanical sensitivities. It affords ignition performance on par with the most powerful primary explosives reported to date. DPPE-1 promises to meet the challenges existing with current primary explosives, and this work could trigger more extensive applications of perovskite.

Preparation of Taraxacum kok-saghyz Rubber and Biofuel Ethanol Simultaneously by the Yeast Fermentation Process.

Taraxacum kok-saghyz(TKS) rubber is considered the most ideal alternative source of natural rubber (NR). Extracting rubber from TKS with high quality, low cost, and low pollution is the basis of commercial development. The TKS roots were subjected to morphological observation and detailed compositional analysis. Scanning electron microscopy (SEM) images confirm that rubber filaments are physically entangled with plant tissues due to differences in molecular polarity. Compared with the traditional solvent TKS rubber extraction process, a new rubber extraction process developed in this study, namely, the microbial extraction (″ME″) process, is less harmful to the environment and lower in cost. The ″ME″ process is divided into three steps: dilute acid pretreatment process, enzyme degradation process, and fermentation process. After each step is completed, the purity of TKS rubber will gradually increase from 84.8% to 93.8 to 95.5%. The TKS rubber finally obtained fully meets the requirements of the traditional rubber industry, especially the tire industry. Besides, the yield of biofuel ethanol, a by-product of cellulose fermentation, reaches 2.05 g/100 g of TKS roots (dry weight), which can effectively reduce the production cost of TKS rubber. In the rubber extraction process, microorganisms have little effect on the quality of TKS rubber. The results show that the molecular weight and chemical structure of TKS rubber is very close to NR, so the ″ME″ process can be used as a new method for large-scale extraction of TKS rubber.

Quantitative Detection of Natural Rubber Content in Eucommia ulmoides by Portable Pyrolysis-Membrane Inlet Mass Spectrometry.

Eucommia ulmoides gum (EUG) is a natural polymer predominantly consisting of trans-1,4-polyisoprene. Due to its excellent crystallization efficiency and rubber-plastic duality, EUG finds applications in various fields, including medical equipment, national defense, and civil industry. Here, we devised a portable pyrolysis-membrane inlet mass spectrometry (PY-MIMS) approach to rapidly, accurately, and quantitatively identify rubber content in Eucommia ulmoides (EU). EUG is first introduced into the pyrolyzer and pyrolyzed into tiny molecules, which are then dissolved and diffusively transported via the polydimethylsiloxane (PDMS) membrane before entering the quadrupole mass spectrometer for quantitative analysis. The results indicate that the limit of detection (LOD) for EUG is 1.36 µg/mg, and the recovery rate ranges from 95.04% to 104.96%. Compared to the result of pyrolysis-gas chromatography (PY-GC), the average relative error is 1.153%, and the detection time was reduced to less than 5 min, demonstrating that the procedure was reliable, accurate, and efficient. The method has the potential to be employed to precisely identify the rubber content of natural rubber-producing plants such as Eucommia ulmoides, Taraxacum kok-saghyz (TKS), Guayule, and Thorn lettuce.

Oral Ionic Liquid for Transdermal Delivery and Obesity Treatment.

Obesity is currently a prerequisite for more than 70% of adults, including chronic obesity and long-term obesity. With the increase of diabetes patients in the world, it is urgent to develop effective oral drugs to replace insulin. However, the gastrointestinal tract is a main obstacle to oral drug preparations. Here, a highly effective oral drug was developed, mainly formulated as an ionic liquid (IL) prepared by l-(-)-carnitine and geranic acid. Density functional theory (DFT) calculations showed that l-(-)-carnitine and geranic acid can exist stably through hydrogen bonding. IL can significantly enhance the transdermal transport of drugs. In vitro study of intestinal permeability showed that particles formed by IL can prevent the absorption of intestinal fat. Compared with the control group, oral administration of IL (10 mL kg-1) significantly reduced blood glucose, white adipose tissue in the liver and epididymis, and the expression of SREBP-1c and ACC in IL. Therefore, these results and high-throughput sequencing analysis showed that IL can effectively reduce the intestinal absorption of adipose tissue to reduce blood glucose. IL has good biocompatibility and stability. Therefore, IL has a certain application value in the field of oral drug-delivery carriers, which provides an effective means for the treatment of diabetes and is a potential tool to solve the epidemic of obesity.

The Application of Cinnamon Twig Extract as an Inhibitor of Listeriolysin O against Listeria monocytogenes Infection.

As a major virulence factor of Listeria monocytogenes (L. monocytogenes), listeriolysin O (LLO) can assist in the immune escape of L. monocytogenes, which is critical for the pathogen to evade host immune recognition, leading to various infectious diseases. Cinnamon twig (CT), as a traditional medicine, has been widely used in clinics for multiple functions and it has exhibited excellent safety, efficacy and stability. There are few reports on the effects of the extracts of traditional medicine on bacterial virulence factors. CT has not been reported to be effective in the treatment of L. monocytogenes infection. Therefore, this study aims to explore the preventive effect of CT against L. monocytogenes infection in vivo and in vitro by targeting LLO. Firstly, a hemolysis assay and a cell viability determination are used to detect the effect of CT extract on the inhibition of the cytolytic activity of LLO. The potential mechanism through which CT extract inhibits LLO activity is predicted through network pharmacology, molecular docking assay, real-time polymerase chain reaction (RT-PCR), Western blotting and circular dichroism (CD) analysis. The experimental therapeutic effect of CT extract is examined in a mouse model infected with L. monocytogenes. Then, the ingredients are identified through a high-performance liquid chromatography (HPLC) and thin layer chromatography (TLC) analysis. Here we find that CT extract, containing mainly cinnamic acid, cinnamaldehyde, ß-sitosterol, taxifolin, catechin and epicatechin, shows a potential inhibition of LLO-mediated hemolysis without any antimicrobial activity. The results of the mechanism research show that CT extract treatment can simultaneously inhibit LLO expression and oligomerization. Furthermore, the addition of CT extract led to a remarkable alleviation of LLO-induced cytotoxicity. After treatment with CT extract, the mortality, bacterial load, pathological damage and inflammatory responses of infected mice are significantly reduced when compared with the untreated group. This study suggests that CT extract can be a novel and multicomponent inhibitor of LLO with multiple strategies against L. monocytogenes infection, which could be further developed into a novel treatment for infections caused by L. monocytogenes.

Influence of relative positions of the heat carrier and lateral canal opening on gutta-percha obturation of lateral canals in a three-dimensional-printed model.

Background/purpose: Effective filling of the lateral canals is of great significance in successful root canal treatment, but it is generally being challenging. This study aimed to evaluate the influence of relative positions of the heat carrier and lateral canal opening on gutta-percha obturation of lateral canals in a three-dimensional (3D)-printed model. Materials and methods: Thermal conductivity and real-time temperature transmission of gutta-percha were investigated using laser flash and thermal infrared analyses. 3D-printed root canal models with lateral canals at 1, 3, and 5 mm from the apex were fabricated, and different relative positions of the heat carrier were tested. The obturation process was recorded on video, and the obturation depth of the lateral canals was observed using X-ray micro-computed tomography. Results: Gutta-percha showed low thermal conductivity of 1.07 W/(m·K), and heating increased the temperature of gutta-percha above 60 °C only within 1 mm beyond the heat carrier tip. For lateral canals at 1 and 3 mm from the apex, gutta-percha penetrated further with deeper penetration of the heat carrier (P < 0.05). For 5-mm lateral canals, the heat carrier was always at apical level and the gutta-percha obturation depth was more at 2 mm apically than at 3 or 4 mm (P < 0.05). Conclusion: Gutta-percha is a poor thermal conductor. The position of the heat carrier in relation to the lateral canal opening affects obturation depth. Only when the heat carrier reaches or passes the lateral canal opening can gutta-percha penetrate a lateral canal.

Construction of the first high-density SNP genetic map and identification of QTLs for the natural rubber content in Taraxacum kok-saghyz Rodin.

BACKGROUND: Taraxacum kok-saghyz Rodin (TKS) is a promising commercial alternative natural rubber (NR) yielding plant. Cultivating TKS with a high NR content is an important breeding target, and developing molecular markers related to NR content can effectively accelerate the breeding process of TKS. RESULTS: To construct a high-density SNP genetic map and uncover genomic regions related to the NR content in TKS, an F1 mapping population of TKS was constructed by crossing two parents (l66 and X51) with significant differences in NR contents. The NR content of the F1 plants ranged from 0.30 to 15.14% and was distributed normally with a coefficient of variation of 47.61%, indicating quantitative trait inheritance. Then, employing whole-genome resequencing (WGR), a TKS genetic linkage map of 12,680 bin markers comprising 322,439 SNPs was generated. Based on the genetic map and NR content of the F1 population, six quantitative trait loci (QTLs) for NR content with LOD > 4.0 were identified on LG01/Chr01 and LG06/Chr06. Of them, the 2.17 Mb genomic region between qHRC-C6-1 and qHRC-C6-2 on ChrA06, with 65.62% PVE in total, was the major QTL region. In addition, the six QTLs have significant additive genetic effects on NR content and could be used to develop markers for marker-assisted selection (MAS) in TKS with a high NR content. CONCLUSION: This work constructed the first high-density TKS genetic map and identified the QTLs and genomic regions controlling the NR content, which provides useful information for fine mapping, map-based cloning, and MAS in TKS.

Study on in vitro NR biosynthesis by rapid quantitative determination of substrate depletion.

A convenient and nonradioactive method for quantifying in vitro NR biosynthesis is presented that is based upon the quantitation of substrate depletion by ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). NR oligomers could be in vitro biosynthesized with the enzyme source from Hevea brasiliensis (Hevea) or Taraxacum kok-saghyz (TKS) by exogenous monomers (IPP) and initiators (FPP). The IPP incorporation rate and FPP consumption rate were 62.24% and 51.14% respectively when the washed rubber particles (WRP) of Hevea was the enzyme source. The IPP incorporation rate and the FPP consumption rate were 74.49% and 95.90% respectively when the sediment bottom fraction (BF) of Hevea was the enzyme source. The in vitro NR biosynthesis can be divided into two stages:(1) the initiation reaction of FPP, which occurs more in BF, and (2) the growth reaction of IPP, which occurs more in WRP. In addition, the IPP incorporation and FPP consumption rates were 59.39% and 34.15% respectively when the BF of TKS was selected as an enzyme source.

Prenatal Morphine Exposure Differentially Alters Addictive and Emotional Behavior in Adolescent and Adult Rats in a Sex-Specific Manner.

The effects of prenatal opioid exposure in adult animals has been widely studied, but little is known about the effects of prenatal opioid on adolescents. Most of the risk behaviors associated with drug abuse are initiated during adolescence. The developmental state of the adolescent brain makes it vulnerable to initiate drug use and susceptible to drug-induced brain changes. In this study, pregnant rats were subcutaneously injected with an increasing dose of morphine (5 mg/kg, 7 mg/kg, 10 mg/kg) for 9 days since the gestation day 11. The effects of prenatal morphine (PNM) on learning and memory, anxiety- and depressive- like behavior, morphine induced conditioned place preference (CPP) as well as locomotor sensitization were tested in both adolescent and adult rats. The results showed that: (1) PNM decreased anxiety-like behavior in both adolescent and adult female rats, but not males; (2) PNM decreased depressive-like behavior in adolescent but increased depressive -like behavior in adult females; (3) PNM increased low dose morphine induced locomotor sensitization in females; (4) PNM decreased tyrosine hydroxylase (TH) expression in the prefrontal cortex but decreased dopamine D1 receptor expression in the nucleus-accumbens (NAc) in female rats. These results suggested that PNM altered the emotional and addictive behavior mainly in female rats, with female rats being less anxiety and depressive during adolescence, but more depressive in adult, and more sensitive to low dose morphine induced locomotor activity sensitization, which might be mediated in part by the differential expression of the TH, dopamine D1 receptors in the female brain.

Prenatal morphine exposure increases gamma oscillation and theta coherence in the rat reward system.

Previous studies have found that prenatal morphine (PNM) exposure leads to both increased and decreased risk of substance abuse in offspring. Understanding more about the neurobiological changes after the PNM exposure would help to understand more about this issue. Signaling from dopamine neurons of the ventral tegmental area (VTA) in the mesoaccumbal and mesocortical pathways plays a vital role in drug dependency. To provide further knowledge about the effects of PNM on drug seeking behavior and the dopamine system. We recorded local field potentials (LFP) simultaneously in the VTA, NAc (nucleus accumbens), BLA (basolateral amygdala) and mPFC (medial prefrontal cortex) in male adult rats prenatally treated with saline or morphine. Morphine (10 mg/kg) induced conditioned place preference (CPP) establishment, extinction and priming were tested to investigate the effects of PNM on addictive-like behavior. In addition, the expression of nuclear histone deacetylases (HDAC4, HDAC5), which plays essential epigenetic roles in neuroplasticity after drug use were also tested in VTA and NAc. The results showed that PNM did not change the acquisition of morphine CPP in male rats, but impaired CPP extinction and morphine (5 mg/kg) - primed reinstatement of CPP after extinction. PNM increased the low gamma (30-60 Hz) and high (60-90 Hz) gamma LFP powers in NAc and BLA. PNM also leads to increased theta (4-9 Hz) coherence between VTA and NAc, and increased HDAC5 expression in VTA. After chronic morphine administration, coherence between VTA-NAc, mPFC-NAc and mPFC-BLA increased significantly in PNS rats, but no changes were find in PNM rats, indicating impaired plasticity in brain circuits. All these results suggest that PNM exposure increased reward processing in adult male rats, but impaired morphine CPP extinction and reinstatement, which relate to decreases network plasticity and increased HDAC5 expression in the reward system.

Safe and Stable Lithium Metal Batteries Enabled by an Amide-Based Electrolyte.

HIGHLIGHTS: A novel amide-based nonflammable electrolyte is proposed. The formation mechanism and solvation chemistry are investigated by molecular dynamics simulations and density functional theory. An inorganic/organic-rich solid electrolyte interphase with an abundance of LiF, Li3N and Li-N-C is in situ formed, leading to spherical lithium deposition. The amide-based electrolyte can enable stable cycling performance at room temperature and 60 ℃. The formation of lithium dendrites and the safety hazards arising from flammable liquid electrolytes have seriously hindered the development of high-energy-density lithium metal batteries. Herein, an emerging amide-based electrolyte is proposed, containing LiTFSI and butyrolactam in different molar ratios. 1,1,2,2-Tetrafluoroethyl-2,2,3,3-tetrafluoropropylether and fluoroethylene carbonate are introduced into the amide-based electrolyte as counter solvent and additives. The well-designed amide-based electrolyte possesses nonflammability, high ionic conductivity, high thermal stability and electrochemical stability (> 4.7 V). Besides, an inorganic/organic-rich solid electrolyte interphase with an abundance of LiF, Li3N and Li-N-C is in situ formed, leading to spherical lithium deposition. The formation mechanism and solvation chemistry of amide-based electrolyte are further investigated by molecular dynamics simulations and density functional theory. When applied in Li metal batteries with LiFePO4 and LiMn2O4 cathode, the amide-based electrolyte can enable stable cycling performance at room temperature and 60 ℃. This study provides a new insight into the development of amide-based electrolytes for lithium metal batteries.

Stable Long Cycling of Small Molecular Organic Acid Electrode Materials Enabled by Nonflammable Eutectic Electrolyte.

Small molecule organic acids as electrode materials possess the advantages of high theoretical capacity, low cost, and good processability. However, these electrode materials suffer from poor cycling stability due to the inevitable dissolution of organic molecules in the electrolytes. Here, a eutectic mixture of lithium bis(trifluoromethanesulfonyl)imide and N-methylamine is employed as a eutectic electrolyte in Li-ion batteries with small molecule organic acids as electrodes. To enhance the cycling stability of the electrolyte, fluoroethylene carbonate is used as an additive. The electrolyte exhibits nonflammability, high ionic conductivity, and good electrochemical stability. Molecular dynamics simulations and density functional theory are performed to further investigate the solvation chemistry of the eutectic electrolyte. The well-designed eutectic electrolyte inhibits the dissolution of terephthalic acid effectively and displays superior performance with a capacity retention of ≈84% after 2000 cycles at a high current density of 1 A g-1 . It also enables stable cycling of more than 900 cycles at a high current density of 2 A g-1 at 60 °C. This study provides a strategy to enhance the cycling stability and safety of Li-ion batteries with organic electrode materials.

Activation of 5-HT1 receptor in lateral habenula impaired contextual fear memory and hippocampal LTP in rat.

Serotonin (5-hydroxytraptamine, 5-HT) is a neurotransmitter plays important roles in emotion and motivation. The action of 5-HT varies across nucleus and the receptor sub-types. Lateral habenula (LHb) in a brain area reciprocally connects with raphe nucleus and plays important roles in emotion and depression. In this study, we aimed to study the role of 5-HT1 receptor in LHb on fear learning. 15 min before or immediate after the fear conditioning, 5-Carboxyamidotrypamine maleate salt (5-CT), an agonist of 5-HT1 receptor, was bilaterally delivered into LHb (1 µg/µl, 1 µl/side) in rats. We found that activation of 5-HT1 receptor in LHb impaired the acquisition but not consolidation of fear memory in rats, which was accompanied by impaired long-term potentiation (LTP) and decreased phosphorylation of α-amino-3-hydroxy-5-methyl-4-isoxazole-propionic acid receptor (AMPAR) subunit 1 (GluA1) at the Ser845 site in hippocampus. In addition, 5-CT decreased the time spent in center area of the open field and time spent in open arm in elevated plus maze. These results suggest that activation of 5-HT1 receptor in LHb impaired acquisition of hippocampal dependent fear memory and increased anxiety- like behavior in rats.

Hyper-Pseudo-Viscoelastic Model and Parameter Identification for Describing Tensile Recovery Stress-Strain Responses of Rubber Components in TBR.

Tires are often in service under dynamic conditions. Realizing the high-precision prediction of the mechanical response of rubber materials under cyclic loading can provide guidance for the design of high-performance tires. In this work, the tensile recovery stress-strain responses of rubber materials in nine different components of a truck and bus radial (TBR) tire were obtained through experiments. Before fitting, an experimental data processing method was proposed to facilitate the parameter identification for a hyper-pseudo-viscoelastic model, that is, the raw experimental data were changed to the adjusted test data. The HyperFit software was used to fit the adjusted test data based on the Yeoh hyperelastic model and the Ogden-Roxburgh pseudoelastic model to obtain the initial material parameters for the two models. In order to describe the permanent set, the Prony series viscoelastic model was introduced. The Isight software was adopted to optimize the parameters. The results showed that the hyper-pseudo-viscoelastic model (i.e., the combination of Yeoh, Ogden-Roxburgh and Prony series models) can describe the tensile recovery mechanical responses (loading curve, unloading curve and permanent set) of nine different rubber components in TBRs. The fitting results are in good agreement with the adjusted data, and all the coefficients of determination (R2) exceed 0.975. Finally, the cyclic deformation simulation of a dumbbell rubber specimen was carried out based on the above constitutive model and fitted parameters. R2 was used to describe the simulation accuracy and its value reached 0.968.

One Step Closer to an Ideal Insensitive Energetic Molecule: 3,5-Diamino-6-hydroxy-2-oxide-4-nitropyrimidone and its Derivatives.

Reaching the goal of developing an insensitive high-energy molecule (IHEM) is a major challenge. In this study, 3,5-diamino-6-hydroxy-2-oxide-4-nitropyrimidone (IHEM-1) was synthesized in one step from 2,4,6-triamino-5-nitropyrimidine-1,3-dioxide hydrate (ICM-102 hydrate). The density of compound IHEM-1 is 1.95 g cm-3 with a decomposition temperature of 271 °C. Its detonation velocity and pressure are 8660 m s-1 and 33.64 GPa, respectively, which are far superior to the detonation performance of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), while its sensitivity is identical with that of TATB. In addition, four derivatives (1a, chloride; 1b, nitrate; 1c, perchlorate; and 1d, dinitramide) were prepared on the basis of the weak base site (N-O group) and show excellent energetic properties. By combining a series of advantages, including simple preparation, high yield, high density, very low solubility in aqueous solution, high thermostability, insensitivity, and excellent detonation performance, IHEM-1 approaches an ideal insensitive high-energy molecule. Compounds 1b-1d are also competitive as new high-energy-density materials.