RESUMEN
Addressing the issue of inadequate temperature tolerance in traditional polymers, in this study, we successfully executed a one-step synthesis of intelligent-responsive polymers which have excellent adaptability in water-gas alternating displacement scenarios. Utilizing the fatty acid method, we produced OANND from oleic acid (OA) and N,N-dimethyl-1,3-propanediamine (NND). Upon testing the average particle size in the aqueous solution both prior and subsequent to CO2 passage, it became evident that OANND assumes the form of a small-molecule particle in the aqueous phase, minimizing damage during formation. Notably, upon CO2 exposure, it promptly organizes into stable micelles with an average size of 88 nm and a relatively uniform particle distribution. This unique characteristic endows it with a rapid CO2 response mechanism and the ability to form a highly resilient gel. In the exploration of viscoelastic fluids, we observed the remarkable behavior of the AONND aqueous solution when CO2/N2 was introduced. This system displayed repeatable transitions between aqueous and gel states, with the highest viscosity peaking at approximately 3895 mPa·s, highlighting its viscosity reversibility and reusability properties. The rheological property results that we obtained indicate that an elongated micellar structure is present in the solution system, with the optimal concentration ratio for its formation determined as 0.8, which is the molar ratio of the OANND-NaOA system. In the sealing performance tests, a 1.0 wt% concentration of the gel system exhibited excellent injectability properties. At 80 °C, this gel effectively reduced the permeability of a sand-filled model to 94.5% of its initial value, effectively sealing potential leakage paths or gas fluxes. This remarkable ability to block leakage paths and reduce seepage capacity highlights the material's superior blocking effect and erosion resistance properties. Furthermore, even at a temperature of 90 °C and an injection pore volume (PV) of 3, this plugging system could reduce the permeability of a high-permeability sand-filled model to over 90% of its initial value.
RESUMEN
A tactile sensor is an indispensable component for electronic skin, mimicking the sensing function of organism skin. Various sensing materials and microstructures have been adopted in the fabrication of tactile sensors. Herein, we propose a highly sensitive flexible tactile sensor composed of nanocomposites with pyramid and irregularly rough microstructures and implement a comparison of piezoresistive properties of nanocomposites with varying weight proportions of multi-wall nanotubes and carbon black particles. In addition to the simple and low-cost fabrication method, the tactile sensor can reach high sensitivity of 3.2 kPa-1 in the range of <1 kPa and fast dynamic response of 217 ms (loading) and 81 ms (recovery) at 40 kPa pressure. Moreover, body movement monitoring applications have been carried out utilizing the flexible tactile sensor. A sound monitoring application further indicates the potential for applications in electronic skin, human-computer interaction, and physiological detection.
RESUMEN
Flexible tactile sensors have broad applications in human physiological monitoring, robotic operation and human-machine interaction. However, the research of wearable and flexible tactile sensors with high sensitivity, wide sensing range and ability to detect three-dimensional (3D) force is still very challenging. Herein, a flexible tactile electronic skin sensor based on carbon nanotubes (CNTs)/polydimethylsiloxane (PDMS) nanocomposites is presented for 3D contact force detection. The 3D forces were acquired from combination of four specially designed cells in a sensing element. Contributed from the double-sided rough porous structure and specific surface morphology of nanocomposites, the piezoresistive sensor possesses high sensitivity of 12.1 kPa-1 within the range of 600 Pa and 0.68 kPa-1 in the regime exceeding 1 kPa for normal pressure, as well as 59.9 N-1 in the scope of < 0.05 N and > 2.3 N-1 in the region of < 0.6 N for tangential force with ultra-low response time of 3.1 ms. In addition, multi-functional detection in human body monitoring was employed with single sensing cell and the sensor array was integrated into a robotic arm for objects grasping control, indicating the capacities in intelligent robot applications.
