[Land Change Simulation and Grassland Carbon Storage in the Loess Plateau Based on SSP-RCP Scenarios].

Exploring the spatial distribution of land use/coverage (LUCC) and ecosystem carbon reserves in the future of climate change can provide a scientific basis for optimizing the distribution of land resources and formulating social economic sustainable development policies. In this study, we integrated the plaques generating land use simulation (PLUS) model and ecosystem services and weighing comprehensive evaluation (InVEST) model. Based on the CMIP6-based sharing socio-economic path and representative concentration path (SSP-RCP), we evaluated the Loess Plateau for time and space dynamic changes in LUCC and ecosystem carbon reserves, analyzed the impact of driving factors on different regions, and explored the correlation between carbon reserves in various regions. The results showed:① In the future, the three scenarios were similar to the LUCC changes. The area of cultivated land, grassland, and unused land would be reduced to varying degrees, and the construction land had expanded sharply. The increase in the three scenarios was 29.23%-53.56% (SSP126), 34.59%-63.28% (SSP245), and 42.80%-73.27% (SSP585). ② Compared with that in 2020, the carbon reserves of SSP126 sites in 2040 increased by 1.813 8×106 t, and in the remaining scenarios it would continue to decline. By 2060, the grassland carbon reserves in the three scenarios decreased by 13.391×106, 33.548×106, and 85.871×106 t, respectively. ③ From the perspective of space correlation, the carbon reserves of the Loess Plateau were correlated between cities. The difference in future scenarios was not significant. The hotspots were distributed in the middle and north of the research area. There was no obvious cold spot area. ④ The changes in land use were predicted to increase or lose carbon reserves. Forestry, cultivated land, and grassland had more carbon reserves those in than other land types. Increasing their area and restrictions on the conversion of other land types should increase the ecosystem carbon reserves.

A hybrid transition metal nanocrystal-embedded graphitic carbon nitride nanosheet system as a superior oxygen electrocatalyst for rechargeable Zn-air batteries.

In this study, we, for the first time, demonstrate a general solid-phase pyrolysis method to synthesize hybrid transition metal nanocrystal-embedded graphitic carbon nitride nanosheets, namely M-CNNs, as a highly efficient oxygen electrocatalyst for rechargeable Zn-air batteries (ZABs). The ratios between metallic acetylacetonates and the g-C3N4 precursor can be controlled where Fe-CNNs-0.7, Ni-CNNs-0.7 and Co-NNs-0.7 composites have been optimized to exhibit superior ORR/OER bifunctional electrocatalytic activities. Specifically, Co-CNNs-0.7 exhibited not only a comparable half-wave potential (0.803 V vs. RHE) to that of the commercial Pt/C catalyst (0.832 V) with a larger current density for the ORR but also a lower overpotential (440 mV) toward the OER compared with the commercial IrO2 catalyst (460 mV), revealing impressive application in rechargeable ZABs. As a result, ZABs using Co-CNNs-0.7 as the cathode exhibited an excellent peak power density of 85.3 mW cm-2 with a specific capacity of 675.7 mA h g-1 and remarkable cycling stability of 1000 cycles, outperforming the commercially available Pt/C + IrO2 catalysts. This study highlights the synergy from heterointerfaces in oxygen electrocatalysis, thus providing a promising approach for advanced metal-air cathode materials.

Coordinative-to-covalent transformation, isomerization dynamics, and logic gate application of dithienylethene based photochromic cages.

Photochromic coordinative cages containing dynamic C[double bond, length as m-dash]N imine bonds are assembled from a dithienylethene-based aldehyde and tris-amine precursors via metallo-component self-assembly. The resulting metal-templated cages are then reduced and demetalated into pure covalent-organic cages (COCs), which are otherwise difficult to prepare via de novo organic synthesis. Both the obtained coordinative and covalent cages can be readily interconverted between the ring-open (o-isomer) and one-lateral ring-closed (c-isomer) forms by UV/vis light irradiation, demonstrating distinct absorption, luminescence and photoisomerization dynamics. Specifically, the ring-closed c-COCs show a blue-shifted absorption band compared with analogous metal-templated cages, which can be applied in photoluminescence (PL) color-tuning of upconversion materials in different ways, showing potential for constructing multi-readout logic gate systems.

Ultrafast water sensing and thermal imaging by a metal-organic framework with switchable luminescence.

A convenient, fast and selective water analysis method is highly desirable in industrial and detection processes. Here a robust microporous Zn-MOF (metal-organic framework, Zn(hpi2cf)(DMF)(H2O)) is assembled from a dual-emissive H2hpi2cf (5-(2-(5-fluoro-2-hydroxyphenyl)-4,5-bis(4-fluorophenyl)-1H-imidazol-1-yl)isophthalic acid) ligand that exhibits characteristic excited state intramolecular proton transfer (ESIPT). This Zn-MOF contains amphipathic micropores (<3 Å) and undergoes extremely facile single-crystal-to-single-crystal transformation driven by reversible removal/uptake of coordinating water molecules simply stimulated by dry gas blowing or gentle heating at 70 °C, manifesting an excellent example of dynamic reversible coordination behaviour. The interconversion between the hydrated and dehydrated phases can turn the ligand ESIPT process on or off, resulting in sensitive two-colour photoluminescence switching over cycles. Therefore, this Zn-MOF represents an excellent PL water-sensing material, showing a fast (on the order of seconds) and highly selective response to water on a molecular level. Furthermore, paper or in situ grown ZnO-based sensing films have been fabricated and applied in humidity sensing (RH<1%), detection of traces of water (<0.05% v/v) in various organic solvents, thermal imaging and as a thermometer.

Homochiral D4-symmetric metal-organic cages from stereogenic Ru(II) metalloligands for effective enantioseparation of atropisomeric molecules.

Absolute chiral environments are rare in regular polyhedral and prismatic architectures, but are achievable from self-assembly of metal-organic cages/containers (MOCs), which endow us with a promising ability to imitate natural organization systems to accomplish stereochemical recognition, catalysis and separation. Here we report a general assembly approach to homochiral MOCs with robust chemical viability suitable for various practical applications. A stepwise process for assembly of enantiopure ΔΔΔΔΔΔΔΔ- and ΛΛΛΛΛΛΛΛ-Pd6(RuL3)8 MOCs is accomplished by pre-resolution of the Δ/Λ-Ru-metalloligand precursors. The obtained Pd-Ru bimetallic MOCs feature in large D4-symmetric chiral space imposed by the predetermined Ru(II)-octahedral stereoconfigurations, which are substitutionally inert, stable, water-soluble and are capable of encapsulating a dozen guests per cage. Chiral resolution tests reveal diverse host-guest stereoselectivity towards different chiral molecules, which demonstrate enantioseparation ability for atropisomeric compounds with C2 symmetry. NMR studies indicate a distinctive resolution process depending on guest exchange dynamics, which is differentiable between host-guest diastereomers.

Dimension Increase via Hierarchical Hydrogen Bonding from Simple Pincer-like Mononuclear complexes.

A tetradentate symmetric ligand bearing both coordination and hydrogen bonding sites, N(1),N(3)-bis(1-(1H-benzimidazol-2-yl)-ethylidene)propane-1,3-diamine (H2bbepd) was utilized to synthesize a series of transition metal complexes, namely [Co(H2bbepd)(H(2)O)2]·2ClO(4) (1), [Cu(H2bbepd)(OTs(-))]·OTs(-) (2),[Cu(bbepd)(CH(3)OH)] (3), [Cd(H(2)bbepd)(NO3)2]·CH(3)OH (4), [Cd(H(2)bbepd)(CH(3)OH)Cl]·Cl (5), and [Cd(bbepd)(CH(3)OH)2] (6). These complexes show similar discrete pincer-like coordination units, possessing different arrangements of hydrogen bonding donor and acceptor sites. With or without the aid of uncoordinated anions and solvent molecules, such mononuclear units have been effectively involved in the construction of hierarchical hydrogen bonding assemblies (successively via level I and level II), leading to discrete binuclear ring (complex 2), one-dimensional chain or ribbon (complexes 3, 4 and 6) and two-dimensional layer (complexes 1 and 5) aggregates.

Direct white-light and a dual-channel barcode module from Pr(III)-MOF crystals.

Direct white-light emission and further a dual-channel readable barcode module in both visible and NIR region was established by single-component homo-metallic Pr(iii)-MOF crystals for the first time.

Near-infrared (NIR) emitting Nd/Yb(III) complexes sensitized by MLCT states of Ru(II)/Ir(III) metalloligands in the visible light region.

Four Ru(II)/Ir(III) metalloligands have been designed and synthesized from polypyridine and bibenzimidazole (BiBzIm) organic ligands, which show strong visible light absorption via metal-to-ligand charge transfer (MLCT) transitions. Nd/Yb(III) complexes were further assembled from these Ru(II)/Ir(III) metalloligands, and Ln(III)-centered NIR emissions can be efficiently sensitized by (3)MLCT states of the metalloligands in the visible-light region. The energy transfer rates for the complexes are generally in the order Nd > Yb, which is due to the better matching between (3)MLCT states of Ru(II)/Ir(III) metalloligands and densely distributed excited states of Nd(III) ions. Long decayed lifetimes on a µs scale and high quantum yields up to 1% are obtained in these lanthanide complexes, suggesting that the Ru(II)/Ir(III) metalloligands can serve as a good visible light harvesting antenna to efficiently sensitize Ln(III)-based NIR luminescence.

Stepwise assembly of Pd(6)(RuL(3))(8) nanoscale rhombododecahedral metal-organic cages via metalloligand strategy for guest trapping and protection.

Stepwise synthesis of nanosized Pd-Ru heteronuclear metal-organic cages from predesigned redox- and photo-active Ru(II)-metalloligand and naked Pd(II) ion is described. The resulting cage shows rhombododecahedral shape and contains a 5350 Å(3) cavity and 12 open windows, facilitating effective trapping of both polar and nonpolar guest molecules. Protection of photosensitive guests against UV radiation is studied.