Creating High-entropy Single Atoms on Transition Disulfides through Substrate-induced Redox Dynamics for Efficient Electrocatalytic Hydrogen Evolution.

The controllable anchoring of multiple metal single-atoms (SAs) into a single support exhibits scientific and technological opportunities,while marrying the concentration-complex multimetallic SAs and high-entropy SAs (HESAs) into one SAC system remains a substantial challenge.Here, we present a substrate-mediated SAs formation strategy to successfully fabricate a library of multimetallic SAs and HESAs on MoS2 and MoSe2 supports, which can precisely control the doping location of SAs. Specially, the contents of SAs can continuously increase until the accessible Mo atoms on TMDs carriers are completely replaced by SAs, thus allowing the of much higher metal contents.In-depth mechanistic study shows that the well-controlled synthesis of multimetallic SAs and HESAs is realized by controlling the reversible redox reaction occurred on the TMDs/TM ion interface.As a proof-of-concept application, a variety of SAs-TMDs were applied to hydrogen evolution reaction. The optimized HESAs-TMDs (Pt,Ru,Rh,Pd,Re-MoSe2) delivers a much higher activity and durability than state of-the-art Pt. Thus, our work will broaden the family of single-atom catalysts and provide a new guideline for the rational design of high-performance single-atom catalysts.

Well-dispersed Pt/Nb2O5on zeolitic imidazolate framework derived nitrogen-doped carbon for efficient oxygen reduction reaction.

In this work, an advanced hybrid material was constructed by incorporating niobium pentoxide (Nb2O5) nanocrystals with nitrogen-doped carbon (NC) derived from ZIF-8 dodecahedrons, serving as a support, referred to as Nb2O5/NC. Pt nanocrystals were dispersed onto Nb2O5/NC using a simple impregnation reduction method. The obtained Pt/Nb2O5/NC electrocatalyst showed high oxygen reduction reaction (ORR) activity due to three-phase mutual contacting structure with well-dispersed Pt and Nb2O5NPs. In addition, the conductive NC benefits electron transfer, while the induced Nb2O5can regulate the electronic structure of Pt element and anchor Pt nanocrystals, thereby enhancing the ORR activity and stability. The half-wave potential (E1/2) for Pt/Nb2O5/NC is 0.886 V, which is higher than that of Pt/NC (E1/2= 0.826 V). The stability examinations demonstrated that Pt/Nb2O5/NC exhibited higher electrocatalytic durability than Pt/NC. Our work provides a new direction for synthesis and structural design of precious metal/oxides hybrid electrocatalysts.

Polypyrrole pre-intercalation engineering-induced NH4+ removal in tunnel ammonium vanadate toward high-performance zinc ion batteries.

Ammonium vanadate with stable bi-layered structure and superior mass-specific capacity have emerged as competitive cathode materials for aqueous rechargeable zinc-ion batteries (AZIBs). Nevertheless, fragile NH…O bonds and too strong electrostatic interaction by virtue of excessive NH4+ will lead to sluggish Zn2+ ion mobility, further largely affects the electro-chemical performance of ammonium vanadate in AZIBs. The present work incorporates polypyrrole (PPy) to partially replace NH4+ in NH4V4O10 (NVO), resulting in the significantly enlarged interlayers (from 10.1 to 11.9 Å), remarkable electronic conductivity, increased oxygen vacancies and reinforced layered structure. The partial removal of NH4+ will alleviate the irreversible deammoniation to protect the laminate structures from collapse during ion insertion/extraction. The expanded interlayer spacing and the increased oxygen vacancies by the virtue of the introduction of polypyrrole improve the ionic diffusion, enabling exceptional rate performance of NH4V4O10. As expected, the resulting polypyrrole intercalated ammonium vanadate (NVOY) presents a superior discharge capacity of 431.9 mAh g-1 at 0.5 A g-1 and remarkable cycling stability of 219.1 mAh g-1 at 20 A g-1 with 78 % capacity retention after 1500 cycles. The in-situ electrochemical impedance spectroscopy (EIS), in-situ X-ray diffraction (XRD), ex-situ X-ray photoelectron spectroscopy (XPS) and ex-situ high resolution transmission electron microscopy (HR-TEM) analysis investigate a highly reversible intercalation Zn-storage mechanism, and the enhanced the redox kinetics are related to the combined effect of interlayer regulation, high electronic conductivity and oxygen defect engineering by partial substitution NH4+ of PPy incorporation.

Ultra-thin and Mechanically Stable LiCoO2 -Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte.

LiCoO2 (LCO) cathode materials have attracted significant attention for its potential to provide higher energy density in current Lithium-ion batteries (LIBs). However, the structure and performance degradation are exacerbated by increasing voltage due to the catastrophic reaction between the applied electrolyte and delithiated LCO. The present study focuses on the construction of physically and chemically robust Mg-integrated cathode-electrolyte interface (MCEI) to address this issue, by incorporating Magnesium bis(trifluoromethanesulfonyl)imide (Mg[TFSI]2 ) as an electrolyte additive. During formation cycles, the strong MCEI is formed and maintained its 2 nm thickness throughout long-term cycling. Notably, Mg is detected not only in the robust MCEI, but also imbedded in the surface of the LCO lattice. As a result, the parasitic interfacial side reactions, surface phase reconstruction, particle cracking, Co dissolution and shuttling are considerably suppressed, resulting in long-term cycling stability of LCO up to 4.5 V. Therefore, benefit from the double protection of the strong MCEI, the Li||LCO coin cell and the Ah-level Graphite||LCO pouch cell exhibit high capacity retention by using Mg-electrolyte, which are 88.13% after 200 cycles and 90.4% after 300 cycles, respectively. This work provides a novel approach for the rational design of traditional electrolyte additives.

Challenges and approaches of single-crystal Ni-rich layered cathodes in lithium batteries.

High energy density and high safety are incompatible with each other in a lithium battery, which challenges today's energy storage and power applications. Ni-rich layered transition metal oxides (NMCs) have been identified as the primary cathode candidate for powering next-generation electric vehicles and have been extensively studied in the last two decades, leading to the fast growth of their market share, including both polycrystalline and single-crystal NMC cathodes. Single-crystal NMCs appear to be superior to polycrystalline NMCs, especially at low Ni content (≤60%). However, Ni-rich single-crystal NMC cathodes experience even faster capacity decay than polycrystalline NMC cathodes, rendering them unsuitable for practical application. Accordingly, this work will systematically review the attenuation mechanism of single-crystal NMCs and generate fresh insights into valuable research pathways. This perspective will provide a direction for the development of Ni-rich single-crystal NMC cathodes.

Foldback-crRNA-Enhanced CRISPR/Cas13a System (FCECas13a) Enables Direct Detection of Ultrashort sncRNA.

The CRISPR/Cas13a system has promising applications in clinical small noncoding RNA (sncRNA) detection because it is free from the interference of genomic DNA. However, detecting ultrashort sncRNAs (less than 20 nucleotides) has been challenging because the Cas13a nuclease requires longer crRNA-target RNA hybrids to be activated. Here, we report the development of a foldback-crRNA-enhanced CRISPR/Cas13a (FCECas13a) system that overcomes the limitations of the current CRISPR/Cas13a system in detecting ultrashort sncRNAs. The FCECas13a system employs a 3'-terminal foldback crRNA that hybridizes with the target ultrashort sncRNA, forming a double strand that "tricks" the Cas13a nuclease into activating the HEPN structural domain and generating trans-cleavage activity. The FCECas13a system can accurately detect miRNA720 (a sncRNA currently known as tRNA-derived small RNA), which is only 17 nucleotides long and has a concentration as low as 15 fM within 20 min. This FCECas13a system opens new avenues for ultrashort sncRNA detection with significant implications for basic biological research, disease prognosis, and molecular diagnosis.

RatioCRISPR: A ratiometric biochip based on CRISPR/Cas12a for automated and multiplexed detection of heteroplasmic SNPs in mitochondrial DNA.

Mitochondrial genetic diseases are often characterized by heteroplasmic single nucleotide polymorphisms (SNPs) where both wild-type (WT) and mutant-type (MT) coexist, making detection of accurate SNP abundance critical for diagnosis. Here, we present RatioCRISPR, an automated ratiometric biochip sensor based on the CRISPR/Cas12a system for detecting multiple heteroplasmic SNPs in mitochondrial DNA (mtDNA). The ratiometric sensor output is only influenced by the relative abundance of WT and MT, with minimal impact from sample concentration. Biochips allow the simultaneous detection of multiple SNP sites for more accurate disease diagnosis. RatioCRISPR can accurately detect 8 samples simultaneously within 25 min with a limit of detection (LOD) of 15.7 aM. We successfully detected 13 simulated samples of three mtDNA point mutations (m.3460G>A, m.11778G>A, and m.14484T>C), which lead to Leber's hereditary optic neuropathy (LHON) and set a threshold (60%) of heteroplasmy to evaluate disease risk. This automated and accurate biosensor has broad applications in diagnosing multiple SNPs, especially those with heteroplasmic variations, making it an advanced and convenient tool for mtDNA disease diagnosis.

Building Atomic Scale and Dense Fe─N4 Edge Sites of Highly Efficient Fe─N─C Oxygen Reduction Catalysts Using a Sacrificial Bimetallic Pyrolysis Strategy.

Replacing high-cost and scarce platinum (Pt) with transition metal and nitrogen co-doped carbon (M/N/C, M = Fe, Co, Mn, and so on) catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells has largely been impeded by the unsatisfactory ORR activity of M/N/C due to the low site utilization and inferior intrinsic activity of the M─N4 active center. Here, these limits are overcome by using a sacrificial bimetallic pyrolysis strategy to synthesize Fe─N─C catalyst by implanting the Cd ions in the backbone of ZIF-8, leading to exposure of inaccessible FeN4 edge sites (that is, increasing active site density (SD)) and high fast mass transport at the catalyst layer of cathode. As a result, the final obtained Fe(Cd)─N─C catalyst has an active site density of 33.01 µmol g-1 (with 33.01% site utilization) over 5.8 times higher than that of Fe─N─C catalyst. Specially, the optimal catalyst delivers a high ORR performance with a half-wave potential of 0.837 (vs RHE) in a 0.1 m HClO4 electrolyte, which surpasses most of Fe-based catalysts.

Revealing the role of hydrogen bond coupling structure for enhanced performance of the solid-state electrolyte.

Achieving practical applications of PEO-based composite solid electrolyte (CPE) batteries requires the precise design of filler structures at the molecular level to form stable composite interfacial phases, which in turn improve the conductivity of Li+ and inhibit the nucleation growth of lithium dendrites. Some functional fillers suffer from severe agglomeration due to poor compatibility with the polymer base or grain boundary migration, resulting in limited improvement in cell performance. In this paper, ILs@KAP1 is reported as a filler to enhance the performance of PEO-based batteries. Thereinto, the hypercrosslinked phosphorus ligand polymer-containing KAP1, designed at the molecular level, has an abundant porous structure, hydrogen bonding network, and a rigid skeleton structure of benzene rings. These can be used both to improve the flammability with PEO-based and to reduce the crystallinity of the polymer electrolyte. Ionic liquids (ILs) are encapsulated in the nanochannels of KAP1, and thus a 3D Li+ conducting framework could be formed. In this case, it could not only facilitate the wettability of the contact interface with the electrode, significantly promoting its compatibility and providing a fast Li+ transport path, but also facilitate the formation of LiF, Li3N and Li2O rich SEI components, further fostering the uniform deposition/exfoliation of lithium. The LFP||CPE||Li battery assembled with ILs@KAP1-PEO-CPE has a high initial discharge specific capacity about 156 mAh/g at 1C and a remaining capacity about 121.8 mAh/g after 300 cycles (capacity retention of 78.07%).

A Multifunctional Nanozyme with NADH Dehydrogenase-Like Activity and Nitric Oxide Release under Near-Infrared Light Irradiation as an Efficient Therapeutic for Antimicrobial Resistance Infection and Wound Healing.

In recent years, antimicrobial resistance (AMR) has become one of the greatest threats to human health. There is an urgent need to develop new antibacterial agents to effectively treat AMR infection. Herein, a novel nanozyme platform (Cu,N-GQDs@Ru-NO) is prepared, where Cu,N-doped graphene quantum dots (Cu,N-GQDs) are covalently functionalized with a nitric oxide (NO) donor, ruthenium nitrosyl (Ru-NO). Under 808 nm near-infrared (NIR) light irradiation, Cu,N-GQDs@Ru-NO demonstrates nicotinamide adenine dinucleotide (NADH) dehydrogenase-like activity for photo-oxidizing NADH to NAD+ , thus disrupting the redox balance in bacterial cells and resulting in bacterial death; meanwhile, the onsite NIR light-delivered NO effectively eradicates the methicillin-resistant Staphylococcus aureus (MRSA) bacterial and biofilms, and promotes wound healing; furthermore, the nanozyme shows excellent photothermal effect that enhances the antibacterial efficacy as well. With the combination of NADH dehydrogenase activity, photothermal therapy, and NO gas therapy, the Cu,N-GQDs@Ru-NO nanozyme displays both in vitro and in vivo excellent efficacy for MRSA infection and biofilm eradication, which provides a new therapeutic modality for effectively treating MRSA inflammatory wounds.

NLRP3 inflammasome activation contributes to fungal clearance and lung injury during Talaromyces marneffei infection.

The increased levels of IL-1ß and IL-18 cytokines have been associated with the severity of sepsis and outcomes of patients infected with Talaromyces marneffei. Previous studies have suggested that NLRP3 plays an important role in caspase-1 activated secretion of IL-1ß and IL-18 in fungal-infected macrophages. In the present study, the role of the NLRP3 inflammasome in talaromycosis is investigated in an in vitro assay and in vivo with a mice systemic infection model. We found that the NLRP3 inflammasome pathway in infected mice is activated along with increased production of IL-1ß. Such an activation of the NLRP3 inflammasome is also observed in either mice or human macrophages challenged with T. marneffei conidia. Our results indicate that IL-1ß release by infected macrophages is NLRP3 inflammasome-dependent and NLRP3 contributes to death of mice at the early stage of pulmonary infection. Moreover, a greater number of MPO-positive cells are found in the lungs of infected Nlrp3-/- mice and WT mice with reduced LDH levels, especially at the last stage of infection. Therefore, we conclude that the NLRP3 Inflammasome activation is important for fungal clearance, neutrophil recruitment and lung injury during T. marneffei Infection.

Cellular membrane-targeting ruthenium complexes as efficient photosensitizers for broad-spectrum antibacterial activity.

A ruthenium complex [Ru(phen)2(phen-5-amine)-C14] (Ru-C14) with broad-spectrum antibacterial activity was designed and synthesized; positively charged Ru-C14 could target bacteria via electrostatic interactions and showed high binding effectiveness to cell membranes. In addition, Ru-C14 could act as a photosensitizer. Under 465 nm light irradiation, Ru-C14 could generate 1O2, thus disrupting the bacterial intracellular redox balance and leading to bacterial death. Ru-C14 also exhibited minimum inhibitory concentration values of 6.25 µM against Escherichia coli and 3.125 µM against Staphylococcus aureus; these values are lower than those of streptomycin and methicillin. This work combined the merits of cell membrane targeting and photodynamic therapy for antibacterial activity. The findings might open up a new avenue for effective anti-infection treatment and other medical applications.

Cellular uptake of nickel by NikR is regulated by phase separation.

Bacterial cells were long thought to be "bags of enzymes" with minimal internal structures. In recent years, membrane-less organelles formed by liquid-liquid phase separation (LLPS) of proteins or nucleic acids have been found to be involved in many important biological processes, although most of them were studied on eukaryotic cells. Here, we report that NikR, a bacterial nickel-responsive regulatory protein, exhibits LLPS both in solution and inside cells. Analyses of cellular nickel uptake and cell growth of E. coli confirm that LLPS enhances the regulatory function of NikR, while disruption of LLPS in cells promotes the expression of nickel transporter (nik) genes, which are negatively regulated by NikR. Mechanistic study shows that Ni(II) ions induces the accumulation of nik promoter DNA into the condensates formed by NikR. This result suggests that the formation of membrane-less compartments can be a regulatory mechanism of metal transporter proteins in bacterial cells.

An aM-level sensitive cascade CRISPR-Dx system (ASCas) for rapid detection of RNA without pre-amplification.

The CRISPR/Cas system is known as one of the directions of the next generation of mainstream molecular diagnostic technology. However, most current CRISPR/Cas molecular diagnostics still rely on the pre-amplification of nucleic acid due to the limited sensitivity of CRISPR/Cas alone, which has no significant advantage over commercial Taqman-PCR and TwistAmp® Exo kits. Herein, we report an aM-level sensitive cascade CRISPR-Dx system (ASCas) that eliminates nucleic acid pre-amplification, thus avoiding aerosol contamination and greatly reducing the testing environment and personnel skill requirements for molecular diagnostics. Most importantly, the Cas13a nucleases with high sensitivity and trans-cleavage efficiency can rapidly cleaved RNA bubbles on the hybridized cascade probe at low concentration target RNA detection, which results in the destruction of the cascade probe and releases a large amount of trigger DNA for further signal amplification of secondary Cas12a reactions. Therefore, the ASCas system achieves amplification-free, ultra-sensitivity (1 aM), and ultra-fast (20 min) RNA detection. In addition, the ASCas system replaces the complicated screening process of primers and probes with the programmed Cas13a-crRNA design so that a suitable detection system can be constructed more quickly and straightforwardly for the mutation-prone SARS-CoV-2 virus.

A portable thermostatic molecular diagnosis device based on high-efficiency photothermal conversion material for rapid field detection of SARS-CoV-2.

The outbreak of the novel coronavirus (SARS-CoV-2) has seriously harmed human health and economic development worldwide. Studies have shown that timely diagnosis and isolation are the most effective ways to prevent the spread of the epidemic. However, the current polymerase chain reaction (PCR) based molecular diagnostic platform has the problems of expensive equipment, high operation difficulty, and the need for stable power resources support, so it is difficult to popularize in low-resource areas. This study established a portable (<300 g), low-cost (<$10), and reusable molecular diagnostic device based on solar energy photothermal conversion strategy, which creatively introduces a sunflower-like light tracking system to improve light utilization, making the device suitable for both high and low-light areas. The experimental results show that the device can detect SARS-CoV-2 nucleic acid samples as low as 1 aM within 30 min.

Enhanced electrocatalytic performance for oxygen evolution reaction via active interfaces of Co3O4arrays@FeOx/Carbon cloth heterostructure by plasma-enhanced atomic layer deposition.

Oxygen evolution reaction (OER) is a necessary procedure in various devices including water splitting and rechargeable metal-air batteries but required a higher potential to improve oxygen evolution efficiency due to its slow reaction kinetics. In order to solve this problem, a heterostructured electrocatalyst (Co3O4@FeOx/CC) is synthesized by deposition of iron oxides (FeOx) on carbon cloth (CC) via plasma-enhanced atomic layer deposition, then growth of the cobalt oxide (Co3O4) nanosheet arrays. The deposition cycle of FeOxon the CC strongly influences thein situgrowth and distribution of Co3O4nanosheets and electronic conductivity of the electrocatalyst. Owing to the high accessible and electroactive areas and improved electrical conductivity, the free-standing electrode of Co3O4@FeOx/CC with 100 deposition cycles of FeOxexhibits excellent electrocatalytic performance for OER with a low overpotential of 314.0 mV at 10 mA cm-2and a small Tafel slope of 29.2 mV dec-1in alkaline solution, which is much better than that of Co3O4/CC (448 mV), and even commercial RuO2(380 mV). This design and optimization strategy shows a promising way to synthesize ideally designed catalytic architectures for application in energy storage and conversion.

Photoacidolysis-Mediated Iridium(III) Complex for Photoactive Antibacterial Therapy.

Photoactive antibacterial therapy is one of the novel therapeutic methods that has great application potential and prospects for curbing bacterial infections. In this work, a photoactivated iridium complex (Ir-Cl) is synthesized for photoactive antibacterial research. Ir-Cl exhibits photoacidolysis, which can generate H+ and be converted into a photolysis product Ir-OH under blue light irradiation. At the meantime, this process is accompanied by 1O2 generation. Notably, Ir-Cl can selectively permeate S. aureus and exhibit excellent photoactive antibacterial activity. Mechanism studies show that Ir-Cl can ablate bacterial membranes and biofilms under light irradiation. Metabolomics analysis proves that Ir-Cl with light exposure mainly disturbs some amino acids' degradation (e.g., valine, leucine, isoleucine, arginine) and pyrimidine metabolism, which indirectly causes the ablation of biofilms and ultimately produces irreversible damage to S. aureus. This work provides guidance for metal complexes in antibacterial application.

Engineering Energy Level of FeN4 Sites via Dual-Atom Site Construction Toward Efficient Oxygen Reduction.

Single-atom catalysts based on metal-N4 moieties and embedded in a graphite matrix (defined as MNC) are promising for oxygen reduction reaction (ORR). However, the performance of MNC catalysts is still far from satisfactory due to their imperfect adsorption energy to oxygen species. Herein, single-atom FeNC is leveraged as a model system and report an adjacent Ru-N4 moiety modulation effect to optimize the catalyst's electronic configuration and ORR performance. Theoretical simulations and physical characterizations reveal that the incorporation of Ru-N4 sites as the modulator can alter the d-band electronic energy of Fe center to weaken the FeO binding affinity, thus resulting in the lower adsorption energy of ORR intermediates at Fe sites. Thanks to the synergetic effects of neighboring Fe and Ru single-atom pairs, the FeN4 /RuN4 catalyst exhibits a half-wave potential of 0.958 V and negligible activity degradation after 10 000 cycles in 0.1 m KOH. Metal-air batteries using this catalyst in the cathode side exhibit a high power density of 219.5 mW cm-2 and excellent cycling stability for over 2370 h, outperforming the state-of-the-art catalysts.

N-Doped Graphene Supported Cu Single Atoms: Highly Efficient Recyclable Catalyst for Enhanced C-N Coupling Reactions.

Heterogenization of homogeneous catalysis through supported single-atom catalysts (SACs) provided a feasible solution to recycling catalysts while keeping its efficiency in chemical synthesis. In this work, Cu SACs anchored on N-doped graphene (Cu SACs/NG) were prepared and first used for C-N coupling reactions. During the preparation, Cu-N-C structures, including Cu-N4 moieties, were formed in a one-step pyrolysis method. As-prepared Cu SACs/NG exhibited excellent catalytic activity toward C-N coupling reactions with a broad scope of substrates and showed outstanding performance of recycling. Compared with Cu nanoparticles (Cu NPs/NG), the advantages of single-atom catalysts were validated via experimental and theoretical calculations. The enhanced performances were attributed to increasing the number of active sites and increasing the intrinsic activity of each active site. This work provides an alternative synthetic strategy for fabricating atomically dispersed SACs and represents a significant advance for coupling reactions.

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Low cycling Coulombic efficiency (CE) and messy Li dendrite growth problems have greatly hindered the development of anode-free Li-metal batteries (AFLBs). Thus, functional electrolytes for uniform lithium deposition and lithium/electrolyte side reaction suppression are desired. Here, we report a locally fluorinated electrolyte (LFE) medium layer surrounding Cu foils to tailor the chemical compositions of the solid-electrolyte interphase (SEI) in AFLBs for inhibiting the immoderate Li dendrite growth and to suppress the interfacial reaction. This LFE consists of highly concentrated LiTFSI dissolved in a fluoroethylene carbonate and/or succinonitrile plastic mixture. The CE of Cu||LiNi0.8Co0.1Mn0.1O2 (NCM811) AFLB increased to a high level of 99% as envisaged, and the cycling ability was also highly improved. These improvements are facilitated by the formation of a uniform, dense, and LiF-rich SEI. LiF possesses high interfacial energy at the LiF/Li interface, resulting in a more uniform Li deposition process as proved by density functional theory (DFT) calculation results. This work provides a simple yet utility tech for the enhancement of future high-energy-density AFLBs.