RESUMEN
A broadband online X-ray spectrometer has been designed and commissioned at the SUD beamline of the Shanghai Soft X-ray Free-Electron Laser Facility, which can deliver both SASE and seeded FEL pulses to user experiments, spanning the photon energy range of 50-620â eV. The resolving powers of the spectrometer calibrated via online measurement at 92â eV and 249â eV are â¼20000 and â¼15000, respectively, and the absolute photon energy is characterized by an electron time-of-flight spectrometer. The high energy resolution provided by the spectrometer can differentiate the fine structure in the FEL spectrum, to determine its pulse length.
RESUMEN
This study explores the limitations of TiO2 as a photocatalyst, focusing on its narrow bandwidth and high electron-hole complexation probabilities that restrict its applications. A novel one-pot synthesis method for TiO2/hydrochar matrix composites is presented, with variations achieved through control of hydrothermal temperature, time, and loading concentration. The efficacy of these composites in ammonia removal is investigated, revealing optimal performance for the composite denoted as 3Ti-160-7, synthesized with a titanium salt concentration of 0.3 mol L-1, a hydrothermal temperature of 160 °C, and a hydrothermal time of 7 hours. Comparative analyses with commercial TiO2 (P25) and hydrochar demonstrate superior performance of 3Ti-160-7, exhibiting significantly lower ammonia concentration and reduced NO and NO2 concentrations. This research underscores the cost-effectiveness and application potential of TiO2/hydrochar matrix composites, offering valuable insights for the enhancement of photocatalytic activity and broader applicability in addressing TiO2-related challenges.
RESUMEN
Accompanied by the progressive development of electronic equipment, excellent electromagnetic interference (EMI) shielding materials display a satisfying prospect in protecting electronic devices against electromagnetic pollution/radiation, while integrating energy conversion. Heretofore, it remains a conundrum to availably construct thin films with multi-interfacial bridging engineering as multifunctional shielding devices. To effectively achieve electromagnetic wave attenuation and integrate energy conversion, a co-mixed vacuum-assisted filtration strategy is designed to synthesize Au@MXene/cellulose nanocrystal/dodecylbenzenesulfonic acid-doped polyaniline (AMCP) films. Profited from the interfacial engineering, the total EMI shielding effectiveness (SE) can be increased by 27 % with the highest value of 67.9 dB. MXene with localized surface plasmon resonance characteristics gives the composite films good energy conversion performance, that is, the composite film can be rapidly heated up to 100 °C under the irradiation of an infrared lamp, and its surface temperature remains stable after continuous irradiation. Additionally, the infrared emissivity is as low as 0.173 within the 8-14 µm, which is necessary to adapt various application scenarios. Therefore, it is reliable that the AMCP films constructed by multicomponent offer a facile strategy for MXene-based EMI shielding devices with integration characteristics.
RESUMEN
Pretreatment process is considered as the most important step for effective microalgae biomass refining and has gained more interest since last decades. However, the main obstacles to commercialize microalgae products are recalcitrant cell wall and lack of cost-effective, green, and sustainable pretreatment approaches. Till now, various microalgae pretreatment approaches have been applied prior to extraction steps to enhance the accessibility of solvent inside the cells. However, high energy consumption and the hazardousness of solvents are considerable problem for these pretreatment methods. In this regard, deep eutectic solvents are recognized as sustainable and green solvents possessing great potential for microalgae biomass processing due to their low toxicity, low cost, biodegradability, easy recycling, and reuse. This article provides the fundamentals of DES composition, synthesis, properties, and the current advances in the application of microalgae biomass process.
Asunto(s)
Lignina , Microalgas , Disolventes Eutécticos Profundos , Biomasa , SolventesRESUMEN
Ammonium perchlorate (AP) has been widely used as an oxidizer in propellants and military mixed explosives in recent years. However, its high characteristic signal, environmental pollution, and poor detonation performance have prompted the industry to seek alternatives to AP. Ammonium nitrate (AN) is a suitable substitute due to its low characteristic signal, lack of pollution, and excellent detonation performance. However, its room-temperature phase transition and hygroscopicity affect its practical use. In this work, we prepared mixed crystal coprecipitation (MCC) materials of AN and potassium perchlorate (KP) using the evaporative solvent method. The characterization of AN/KP MCCs was carried out by combining TG-DSC, XRD, FT-IR, and SEM analysis, revealing that the formation of MCCs by AN and KP is due to ion exchange between the two components. AN/KP MCCs not only solve the problem of room-temperature phase transition in AN but also reduce its hygroscopicity. Furthermore, AN/KP MCCs have mechanical sensitivity, explosive performance, and specific impulse similar to pure AN, but compared to AN, AN/KP MCCs have higher density, effective oxygen content, and thermal stability. Compared with existing oxidizers AN, AP, and KP, AN/KP MCCs with high density, low sensitivity, high oxygen content, and high safety have obvious advantages and have good prospects in the application of oxidizers in solid propellants and military mixed explosives.
RESUMEN
BACKGROUND: Perineural invasion (PNI) of intrahepatic cholangiocarcinoma (ICC) is a strong independent risk factor for tumour recurrence and long-term patient survival. However, there is a lack of noninvasive tools for accurately predicting the PNI status. The authors develop and validate a combined model incorporating radiomics signature and clinicoradiological features based on machine learning for predicting PNI in ICC, and used the Shapley Additive explanation (SHAP) to visualize the prediction process for clinical application. METHODS: This retrospective and prospective study included 243 patients with pathologically diagnosed ICC (training, n =136; external validation, n =81; prospective, n =26, respectively) who underwent preoperative contrast-enhanced computed tomography between January 2012 and May 2023 at three institutions (three tertiary referral centres in Guangdong Province, China). The ElasticNet was applied to select radiomics features and construct signature derived from computed tomography images, and univariate and multivariate analyses by logistic regression were used to identify the significant clinical and radiological variables with PNI. A robust combined model incorporating radiomics signature and clinicoradiological features based on machine learning was developed and the SHAP was used to visualize the prediction process. A Kaplan-Meier survival analysis was performed to compare prognostic differences between PNI-positive and PNI-negative groups and was conducted to explore the prognostic information of the combined model. RESULTS: Among 243 patients (mean age, 61.2 years ± 11.0 (SD); 152 men and 91 women), 108 (44.4%) were diagnosed as PNI-positive. The radiomics signature was constructed by seven radiomics features, with areas under the curves of 0.792, 0.748, and 0.729 in the training, external validation, and prospective cohorts, respectively. Three significant clinicoradiological features were selected and combined with radiomics signature to construct a combined model using machine learning. The eXtreme Gradient Boosting exhibited improved accuracy and robustness (areas under the curves of 0.884, 0.831, and 0.831, respectively). Survival analysis showed the construction combined model could be used to stratify relapse-free survival (hazard ratio, 1.933; 95% CI: 1.093-3.418; P =0.021). CONCLUSIONS: We developed and validated a robust combined model incorporating radiomics signature and clinicoradiological features based on machine learning to accurately identify the PNI statuses of ICC, and visualize the prediction process through SHAP for clinical application.
Asunto(s)
Neoplasias de los Conductos Biliares , Colangiocarcinoma , Femenino , Humanos , Masculino , Persona de Mediana Edad , Neoplasias de los Conductos Biliares/diagnóstico por imagen , Conductos Biliares Intrahepáticos , Colangiocarcinoma/diagnóstico por imagen , Aprendizaje Automático , Estudios Prospectivos , Radiómica , Estudios Retrospectivos , Tomografía Computarizada por Rayos XRESUMEN
The Shanghai Soft X-ray Free-Electron Laser (SXFEL) is the first X-ray free-electron laser facility in China. The SASE beamline, which consists of a pink-beam branch and a mono-beam branch, is one of the two beamlines in the Phase-I construction. The pink-beam branch opened for users in 2023 after successful first-round beamline commissioning. In this paper, the design of the beamline is presented and the performance of the pink-beam branch is reported. The measured energy-resolving power of the online spectrometer is over 6000 @ 400â eV. The focusing spot size of the pink beam is less than 3â µm in both the horizontal and vertical at the endstation.
RESUMEN
The current popular one-shot multi-object tracking (MOT) algorithms are dominated by the joint detection and embedding paradigm, which have high inference speeds and accuracy, but their tracking performance is unstable in crowded scenes. Not only does the detection branch have difficulty in obtaining the accurate object position, but the ambiguous appearance of features extracted by the re-identification (re-ID) branch also leads to identity switches. Focusing on the above problems, this paper proposes a more robust MOT algorithm, named CSMOT, based on FairMOT. First, on the basis of the encoder-decoder network, a coordinate attention module is designed to enhance the information interaction between channels (horizontal and vertical coordinates), which improves its object-detection abilities. Then, an angle-center loss that effectively maximizes intra-class similarity is proposed to optimize the re-ID branch, and the extracted re-ID features are made more discriminative. We further redesign the re-ID feature dimension to balance the detection and re-ID tasks. Finally, a simple and effective data association mechanism is introduced, which associates each detection instead of just the high-score detections during the tracking process. The experimental results show that our one-shot MOT algorithm achieves excellent tracking performance on multiple public datasets and can be effectively applied to crowded scenes. In particular, CSMOT decreases the number of ID switches by 11.8% and 33.8% on the MOT16 and MOT17 test datasets, respectively, compared to the baseline.
RESUMEN
Liposomes (lipos), one of the most successful nanotherapeutics in the clinic, have made a rapid advance over the past few years. However, still, several challenges exist for lipos for clinical practice, such as low drug loading and premature drug leakage during in vivo circulation. Paclitaxel (PTX), a commonly used first-line drug for cancer chemotherapy, was chosen as the model drug. Due to its non-ionizable and water-insoluble characteristics, the drug-loading efficiency of the marketable PTX lipos, Lipusu, is only 6.76%. Herein, we designed an ionizable PTX prodrug (PTXP) by modifying phenylboronic acid on the C2' hydroxyl group of PTX for the remote loading of liposomal formulations through the pH gradient method. Compared with Lipusu, PTXP lipos displayed a 34% higher loading efficiency and an encapsulation efficiency of approximately 95%. A series of in vitro/vivo experiments indicated that PTXP lipos possess colloidal stability, prolonged blood circulation, high tumor site accumulation, potent anti-tumor effects, and safety. A combination of ionizable prodrugs and remote loading has proved to be an effective and simple strategy to achieve high liposomal encapsulation efficiency of poorly soluble non-ionizable drugs for clinical application.
Asunto(s)
Neoplasias de la Mama , Profármacos , Humanos , Femenino , Liposomas , Línea Celular Tumoral , Paclitaxel/uso terapéutico , Neoplasias de la Mama/tratamiento farmacológicoRESUMEN
It is important to have sustainable and edible scaffolds to produce cultivated meat. In this research, three-dimensional (3D) porous scaffolds were developed by soy protein amyloid fibrils for cultivated meat applications. Food-safe biological and physical cross-linking methods using microbial transglutaminase and temperature-controlled water vapor annealing technique were employed to crosslink soy protein amyloid fibrils, resulting in the production of 3D scaffolds. The generated 3D scaffolds had pores with sizes ranging from 50 to 250 µm, porosities of 72-83%, and compressive moduli of 3.8-4.2 kPa, depending on the type of soy protein used in the process (ß-conglycinin (7S), glycinin (11S) and soy protein isolate (SPI)). When present with pepsin, these scaffolds can degrade within an hour but remain stable in phosphate-buffered saline for at least 30 days. The soy protein amyloid fibril scaffolds enabled C2C12 mouse skeletal myoblasts proliferate and differentiate without adding cell adhesive proteins or other coatings. The results demonstrate the potential of abundant and inexpensive soy protein amyloid fibrils to be utilized as scaffold materials for cultivated meat in the food industry.
Asunto(s)
Amiloide , Proteínas de Soja , Animales , Ratones , Temperatura , CarneRESUMEN
BACKGROUND: Accurate and timely access to large-scale crop damage information provides an essential reference for responding to agricultural disaster prevention and mitigation needs and ensuring food production security. The present study aimed to reveal the new characteristics of low-temperature cold damage to maize in the context of climate warming. Heilongjiang, one of the provinces with the highest latitude, the most significant climate change and the largest maize production in China, was taken as the study area. We combined meteorological stations and MODIS remote sensing data to spatially identify the occurrence and intensity of cold damage to maize based on the growing season temperature distance level index, as well as to assess the extent of cold damage. RESULTS: The main findings are: (i) The frequency and intensity range of cold damage in the growing season (May to September) in Heilongjiang Province from 1991 to 2020 against climate warming showed a decreasing trend. The average temperature from 1991 to 2000 was 17.777 °C, with seven occurrences of maize cold damage years, of which 5 years comprised widespread cold damage and 2 years comprised regional cold damage. The average temperature from 2000 to 2010 was 18.137 °C, with cold damage three times, of which 2 years comprised regional cold damage and 1 year comprised widespread cold damage. The average temperature from 2010 to 2020 was 18.130 °C, with one maize cold damage year occurring, which comprised regional cold damage. The frequency of maize chilling injury decreased significantly from 1991 to 2020, from 0.23 in 1991-2000 to 0.1 in 2000-2010 and, finally, to 0.03 in 2010-2020. (ii) The good consistency between MODIS_LST data and temperature data from meteorological stations suggests that MODIS_LST data can be used to build a temperature remote sensing estimation model for spatially extensive cold damage monitoring and intensity discrimination. (iii) Taking 2009 as an example of a large-scale cold damage year, the spatial discrimination of maize cold damage intensity shows that the spatial distribution of chilling injury intensity has no obvious geographical features. The intensity of cold damage was mainly mild cold damage. According to administrative regions, the scope of chilling injury was the largest in Mudanjiang City, Heihe City, and Jixi City, accounting for 91.56%, 86.25%, and 84.91%, respectively. The areas with the most extensive range of severe chilling injuries were the Great Khingan Mountains region, Heihe City, Mudanjiang City, Yichun City, and Jixi City. CONCLUSION: In the context of climate warming, the frequency and intensity range of maize cold damage showed a decreasing trend from 1991 to 2020 in Heilongjiang Province. The results of cold damage identification based on MODIS_LST data are accurate and can improve the spatial accuracy. The results of the present study provide a reference and guidance for dealing with the occurrence and defence of spatially refined cold damage. © 2023 Society of Chemical Industry.
Asunto(s)
Frío , Zea mays , Temperatura , Cambio Climático , Estaciones del Año , ChinaRESUMEN
The massive emission of CO2 has caused a series of environmental problems, including global warming, which exacerbates natural disasters and human health. Cu-based catalysts have shown great activity in the reduction of CO2, but the mechanism of CO2 activation remains ambiguous. In this work, we performed density functional theory (DFT) calculations to investigate the hydrogenation of CO2 on Cu(211)-Rh, Cu(211)-Ni, Cu(211)-Co, and Cu(211)-Ru surfaces. The doping of Rh, Ni, Co, and Ru was found to enhance CO2 hydrogenation to produce COOH. For CO2 hydrogenation to produce HCOO, Ru plays a positive role in promoting CO dissociation, while Rh, Ni, and Co increase the barriers. These results indicate that Ru is the most effective additive for CO2 reduction in Cu-based catalysts. In addition, the doping of Rh, Ni, Co, and Ru alters the electronic properties of Cu, and the activity of Cu-based catalysts was subsequently affected according to differential charge analysis. The analysis of Bader charge shows good predictions for CO2 reduction over Cu-based catalysts. This study provides some fundamental aids for the rational design of efficient and stable CO2-reducing agents to mitigate CO2 emission.
RESUMEN
PURPOSE: Transtibial pullout repair improves the clinical outcomes of medial meniscus (MM) posterior root tears (PRTs); however, reducing MM extrusion remains challenging. Thus, the purpose of this study was to examine the role of additional posterior anchoring (PA) during pullout repair in reducing the severity of MM extrusion compared to pullout repair alone. METHODS: Patients who underwent pullout repair with two-cinch stitches (TCS) only or TCS combined with PA (TCS-PA)-deployment of an additional suture anchor in the posteromedial corner of MM-were included retrospectively. MM medial and posterior extrusion (MMME and MMPE), MM extrusion and remaining volume (MMEV and MMRV), and corresponding ratios were evaluated pre-operatively and three months post-operatively using a three-dimensional meniscal model at 10° and 90° of knee flexion and compared within and between groups. RESULTS: A total of 15 and 16 patients treated with TCS and TCS-PA, respectively, were enrolled. At 90° knee flexion, both techniques significantly reduced MMPE (TCS: 4.2 ± 0.7 mm to 3.5 ± 0.6 mm, p < 0.05; TCS-PA: 3.7 ± 0.8 mm to 2.8 ± 0.7 mm, p < 0.05) at three months post-operatively. TCS-PA reduced MMPE more significantly than TCS alone (p < 0.05). Only TCS-PA significantly improved the MMEV and MMRV ratios (39.6 ± 8.9% to 28.1 ± 6.0%, p < 0.05 and 60.4 ± 8.9% to 71.9 ± 6.0%, p < 0.05, respectively). Significance was not found in all other comparisons. CONCLUSIONS: Both techniques improved MMPE at knee flexion at the three month follow-up, with TCS-PA providing significantly superior results. Our findings support the evidence that the application of PA may be an effective surgical option for alleviating persistent MMPE.
RESUMEN
BACKGROUND: Transtibial pullout repair yields beneficial clinical outcomes in patients with medial meniscus (MM) posterior root tear. However, the relationship between repaired meniscal root healing status and postoperative clinical outcomes remains unclear. We aimed to evaluate changes in articular cartilage damage and clinical scores after pullout repair using two simple stitches (TSS). METHODS: Thirty-three patients who underwent pullout repair using TSS were assessed. Healing status was assessed by a semi-quantitative second-look arthroscopic scoring system comprising three evaluation criteria (width of bridging tissues, stability of the repaired root, and synovial coverage), 1 year postoperatively. MM medial extrusion (MMME) and cartilage damage were assessed preoperatively and 1 year postoperatively. The medial compartment was divided into 8 zones (A-H) for comparison of preoperative and 1-year postoperative cartilage damage. Clinical outcomes were evaluated using the Knee Injury and Osteoarthritis Outcome score, Lysholm score, International Knee Documentation Committee scores, and visual analogue scale pain score. RESULTS: Although cartilage damage did not aggravate significantly in most medial compartment areas, MMME progressed at 1 year postoperatively. No statistical differences were observed in cartilage damage between the central-to-medial area of the medial femoral condyle and the medial tibial plateau area at 1 year postoperatively. Regarding semi-quantitative healing scores, the stability score was significantly correlated with the International Cartilage Repair Society grade at 1 year postoperatively. All 1-year and 2-year clinical scores significantly improved compared with the preoperative scores. CONCLUSION: Regarding TSS repair, stability of repaired meniscal root negatively correlated with cartilage damage in the medial compartment loading area. All 1-year and 2-year clinical scores significantly improved than those of the preoperative scores. Achieving MM stability is crucial for suppressing cartilage degeneration. LEVEL OF EVIDENCE: IV case series study.
Asunto(s)
Meniscos Tibiales , Lesiones de Menisco Tibial , Humanos , Meniscos Tibiales/diagnóstico por imagen , Meniscos Tibiales/cirugía , Artroscopía , Lesiones de Menisco Tibial/diagnóstico por imagen , Lesiones de Menisco Tibial/cirugía , Articulación de la Rodilla/cirugía , Rotura , Imagen por Resonancia Magnética , Estudios RetrospectivosRESUMEN
Recently, transtibial pullout repair of the medial meniscus (MM) posterior root tear (PRT) has become widely accepted and provides satisfactory clinical outcomes. Widening after cyclic loading or ultimate failure load using different suture materials and configurations has been studied. However, no study has compared the clinical outcomes using different suture materials. This study aimed to evaluate the clinical outcomes after performing MMPRT pullout repair using different suture materials. We hypothesized that better clinical outcomes would be achieved using ultra-high molecular weight polyethylene (UHMWPE) tape compared with a normal polyester suture. Thirty-seven patients who underwent MM posterior root repair between November 2019 and May 2020 were retrospectively investigated. Pullout repair was performed using a hollow no. 0 polyester suture (n = 14) and UHMWPE tape (n = 23). Clinical outcomes were assessed preoperatively and at 1 year postoperatively, using the Lysholm knee score, Knee Injury and Osteoarthritis Outcome Score, and visual analogue scale (VAS) pain score. The meniscal healing status was assessed using an arthroscopic scoring system (range: 0-10). All clinical scores were improved significantly in both groups. However, significantly higher meniscal healing scores and decreased VAS pain scores were observed in the UHMWPE group (7.3 ± 0.9 and 7.7 ± 11.3, respectively) than in the polyester group (5.6 ± 2.1 and 18.4 ± 18.6, respectively; p < 0.01). Suture cut-out and loss of the root continuity were observed in some cases (three cases [21.4%] in the polyester suture group and one case [4.3%] in the UHMWPE tape group). Both suture materials led to satisfactory clinical outcomes at 1 year postoperatively, whereas the UHMWPE tape was useful for obtaining good meniscal healing and decreasing the VAS pain score.
Asunto(s)
Meniscos Tibiales , Lesiones de Menisco Tibial , Humanos , Meniscos Tibiales/cirugía , Estudios Retrospectivos , Lesiones de Menisco Tibial/cirugía , Técnicas de Sutura , Suturas , Poliésteres , Dolor , Artroscopía , Imagen por Resonancia MagnéticaRESUMEN
Cellulose can be dissolved in ionic liquids (ILs), and it can be recovered by adding antisolvent such as water or alcohol. In addition, the regenerated cellulose can be used for textiles, degradable membranes, hydrogels/aerogels, etc. However, the regenerated mechanism of cellulose remains ambiguous. In this work, density functional theory (DFT) calculation is reported for the cellulose regeneration from a cellulose/1-n-butyl-3-methylimidazolium acetate (BmimOAc)/water mixture. To investigate the microscopic effects of the antisolvents, we analyzed the structures and H-bonds of BmimOAc-nH2O and cellobiose-ILs-nH2O (n = 0-6) clusters. It can be found that when n ≥ 5 in the BmimOAc-nH2O clusters, the solvent-separated ion pairs (SIPs) play a dominant position in the system. With the increasing numbers of water molecules, the cation-anion interaction can be separated by water to reduce the effects of ILs on cellulose dissolution. Furthermore, the BmimOAc-nH2O and cellobiose-ILs (n = 0-6) clusters tend to be a more stable structure with high hydration in an aqueous solution. When the water molecules were added to the system, H-bonds can be formed among H2O, the hydroxyl of cellulose, and the oxygen of OAc. Therefore, the interactions between cellulose and ILs will be decreased to promote cellulose regeneration. This work would provide some help to understand the mechanism of cellulose regeneration from the view of theoretical calculation.
RESUMEN
BACKGROUND: There are no recommendations for specific suture materials in transtibial pullout repair of medial meniscus posterior root tears. This study aimed to evaluate the clinical outcomes of transtibial pullout repair of medial meniscus posterior root tears using ultrahigh-molecular-weight polyethylene sutures and suture tape. METHODS: We retrospectively reviewed the data of 36 patients (27 women and 9 men, mean age 64.1 years) who had undergone transtibial pullout repair of medial meniscus posterior root tears between November 2018 and December 2019. Two groups of 18 patients each received either two different cord-like sutures or suture tape. Clinical parameters were assessed preoperatively and on second-look arthroscopy (mean postoperative period 12 months). The meniscal healing status was assessed using a previously published scoring system (ranging from 0 to 10), and the incidence rate of suture cut-out was assessed on second-look arthroscopy. RESULTS: All clinical scores significantly improved in both groups, with no significant between-group differences on second-look arthroscopy. The arthroscopic meniscal healing scores significantly differed between sutures (mean 6.7 points) and suture tape (mean 7.4 points; p = 0.044). No significant between-group difference in the suture cut-out rate was observed. CONCLUSIONS: This study found no significant differences in the clinical outcomes between ultrahigh-molecular-weight polyethylene sutures and suture tape. Favorable clinical outcomes were obtained using both types of suture; however, the usefulness of suture tape appears to be limited.
RESUMEN
Carbon emissions have become a focus of political and academic concern in the global community since the launch of the Kyoto Protocol. As the largest carbon emitter, China has committed to reaching the carbon peak by 2030 and carbon neutrality by 2060 in the 75th United Nations High-level Meeting. The transport sector needs to be deeply decarbonized in China to achieve this goal. Previous studies have shown that the carbon emissions of the railway sector are small compared to highways, waterways, and civil aviation. However, these studies only consider the operation stage and do not consider the carbon emissions caused by large-scale railway infrastructure construction during the construction stage. As an essential source of carbon emissions and the focus of emissions reduction, the carbon emission of railway construction projects (RCPs) is in urgent need of relevant research. Based on a systematic literature review (SLR), this paper sorts out the carbon emission factors (CEFs) related to RCPs; combines semi-structured expert interviews to clarify the carbon emissions measurement boundary of RCPs; modifies and calibrates CEFs; constructs the carbon emission measurement model of RCPs including building material production stage, building material transportation stage, and construction stage; and conducts empirical analysis to validate carbon emission factors and measurement models. This study effectively complements the theoretical research on CEFs and measurement models in the construction stage of railway engineering and contributes to guiding the construction of low-carbon railways practically.
Asunto(s)
Carbono , Transportes , Carbono/análisis , Dióxido de Carbono/análisis , China , Materiales de ConstrucciónRESUMEN
Forage availability and quality directly impact animal performance, ultimately affecting productivity and health. This study aimed to understand the interaction between qualitative and quantitative vegetation availability and feed intake of goats on alpine pastures in the Chinese Altai Mountains. The daily grazing routes of three goats from a local herding family were monitored with GPS devices set at a logging rate of 64 s during spring and the early and late summer season in 2013 and 2014. The quantity and quality of vegetation along their grazing routes was determined, and the amount of feces excreted was measured in a total of five goats per season for the indirect determination of the animals' feed intake. The grazing routes were longer in spring than in summer, leading to larger grazing areas visited in spring. Vegetation on offer ranged from 980 to 2400 kg dry mass per hectare and was similar in the spring and summer seasons but higher in 2013 than in 2014. Feed consumption of forage and nutrients did not significantly differ between seasons and years, respectively, suggesting that the goats' nutrient intake was not restricted by interannual variability of forage on offer. Regular monitoring of animal numbers and of vegetation quantity and quality on the mountain rangelands can help responsible government agencies to estimate forage offtake of small ruminants in order to timely adjust grazing pressure in the study region.