Smell loss is associated with cognitive impairment in amyotrophic lateral sclerosis patients.

BACKGROUND: Smell loss significantly impacts the quality of life in patients. However, there is limited research on smell loss in individuals with amyotrophic lateral sclerosis (ALS), and the correlation between smell loss and cognitive impairment is unclear. This study aimed to investigate the correlation between smell loss and cognition impairment in ALS patients. METHODS: The study included 216 ALS patients. The Edinburgh Cognitive and Behavioural ALS Screen (ECAS) and smell identification test specifically for the Chinese population (CSIT) were administered to evaluate participants' cognitive and olfactory function, respectively. RESULTS: After covarying for age, sex, BMI, education level, degree of hunger, dietary bias, eagerness for food, stress, smoking status, alcohol consumption, and upper respiratory tract infection (URTI) or rhinitis, CSIT scores were significantly correlated with ECAS scores (r = 0.162, p = 0.028), especially the ALS-specific scores (r = 0.158, p = 0.031). Even after excluding patients with URTI or rhinitis, the results were similar. CSIT scores were significantly correlated with ECAS scores (r = 0.224, p = 0.011), especially the ALS-specific scores (r = 0.205, p = 0.019). CONCLUSION: In patients with ALS, smell loss is significantly correlated with cognitive impairment, particularly frontotemporal dysfunction. Cognitive dysfunction may lead to worse olfactory performance in ALS patients.

Discovery of an efficacious KDM5B PROTAC degrader GT-653 up-regulating IFN response genes in prostate cancer.

Epigenetic alterations promote cancer development by regulating the expression of various oncogenes and anti-oncogenes. Histone methylation modification represents a pivotal area in epigenetic research and numerous publications have demonstrated that aberrant histone methylation is highly correlated with tumorigenesis and development. As a key histone demethylase, lysine-specific demethylase 5B (KDM5B) demethylates lysine 4 of histone 3 (H3K4) and serves as a transcriptional repressor of certain tumor suppressor genes. Meanwhile, KDM5B inhibits STING-induced intrinsic immune response of tumor cells or recruits SETDB1 through non-enzymatic function to silence reverse transcription elements to promote immune escape. The conventional small molecule inhibitors can only inhibit the enzymatic function of KDM5B with no effect on the non-enzymatic function. In the article, we present the development of the first series of KDM5B degraders based on CPI-455 to inhibit the non-enzymatic function. Among them, GT-653 showed optimal KDM5B degradation efficiency in a ubiquitin proteasome-dependent manner. GT-653 efficiently reduced KDM5B protein levels without affecting KDM5B transcription. Interestingly, GT-653 increased H3K4me3 levels and activated the type-I interferon signaling pathway in 22RV1 cells without significant phenotypic response on cell proliferation.

HPLC and LC-MS/MS-Based Quantitative Characterization of Related Substances Associated with Sotalol Hydrochloride.

In total, three related substances (RS) associated with sotalol hydrochloride (STHCl) were herein identified with a novel gradient high-performance liquid chromatography (HPLC) protocol. Further characterization of these substances was then performed via liquid chromatography-mass spectroscopy (LC-MS/MS) and nuclear magnetic resonance (NMR) approaches. For these analyses, commercial STHCl samples were used for quantitative HPLC studies and the degradation of STHCl under acidic (1M HCl), alkaline (1M NaOH), oxidative (30% H2O2), photolytic (4500 Lx), and thermal stress conditions (100 °C) was assessed. This approach revealed this drug to be resistant to acidic, alkaline, and high-temperature conditions, whereas it was susceptible to light and oxidation as confirmed through long-term experiments. The putative mechanisms governing RS formation were also explored, revealing that RS3 was derived from the manufacturing process, whereas RS2 was generated via oxidation and RS1 was generated in response to light exposure. The cytotoxicity of these RS compounds was then assessed using MTT assays and acute toxicity test. Overall, this study provides details regarding the characterization, isolation, quantification, and toxicological evaluation of STHCl and associated RS compounds together with details regarding the precise, specific, and reliable novel HPLC technique, thus providing the requisite information necessary to ensure STHCl purity and safety.

Experimental study on CO2 capture by MEA/n-butanol/H2O phase change absorbent.

Monoethanolamines (MEAs) are widely used for CO2 capture, but their regeneration energy consumption is very high. CO2 Phase change absorbents (CPCAs) can be converted into CO2-rich and CO2-lean phases after absorbing CO2, and the regeneration energy consumption can be reduced because only the CO2-rich phase is thermally desorbed. In this paper, a novel CPCA with the composition "MEA/n-butanol/H2O (MNBH)" is proposed. Compared with the reported MEA phase change absorbent, the MNBH absorbent has higher CO2 absorption capacity, smaller absorbent viscosity and CO2-rich phase volume. The MNBH absorbent has the highest CO2 absorption capacity of 2.5227 mol CO2 per mol amine at a mass ratio of 3 : 4 : 3. The CO2 desorption efficiency reaches 89.96% at 120 °C, and the CO2 regeneration energy consumption is 2.6 GJ tCO2-1, which is about 35% lower than that of the 30 wt% MEA absorbent. When the mass ratio of MNBH absorbent was 3 : 6 : 1, the CO2 recycling capacity was 4.1918 mol CO2 L-1, which is 76% higher than that of the conventional 30 wt% MEA absorbent. The phase change absorbent developed in this paper can reduce the desorbent volume by about 50% and has good absorption performance for CO2 in flue gas.

A review of metallurgical slags as catalysts in advanced oxidation processes for removal of refractory organic pollutants in wastewater.

With the rapid growth of the metallurgical industry, there is a significant increase in the production of metallurgical slags. The waste slags pose significant challenges for their disposal because of complex compositions, low utilization rates, and environmental toxicity. One promising approach is to utilize metallurgical slags as catalysts for treatment of refractory organic pollutants in wastewater through advanced oxidation processes (AOPs), achieving the objective of "treating waste with waste". This work provides a literature review of the source, production, and chemical composition of metallurgical slags, including steel slag, copper slag, electrolytic manganese residue, and red mud. It emphasizes the modification methods of metallurgical slags as catalysts and the application in AOPs for degradation of refractory organic pollutants. The reaction conditions, catalytic performance, and degradation mechanisms of organic pollutants using metallurgical slags are summarized. Studies have proved the feasibility of using metallurgical slags as catalysts for removing various pollutants by AOPs. The catalytic performance was significantly influenced by slags-derived catalysts, catalyst modification, and process factors. Future research should focus on addressing the safety and stability of catalysts, developing green and efficient modification methods, enhancing degradation efficiency, and implementing large-scale treatment of real wastewater. This work offers insights into the resource utilization of metallurgical slags and pollutant degradation in wastewater.

Machine learning: Next promising trend for microplastics study.

Microplastics (MPs), as an emerging pollutant, pose a significant threat to humans and ecosystems. However, traditional MPs characterization methods are limited by sample requirements and characterization time. Machine Learning (ML) has emerged as a vital technology for analyzing MPs pollution due to its accuracy, broad application, and powerful feature extraction. Nevertheless, environmental scientists require threshold knowledge before using ML, restricting the ML application in MPs research. Furthermore, imbalanced development of ML in MPs research is a pressing concern. In order to achieve a wide ML application in MPs research, in this review, we comprehensively discussed the size and sources of MPs datasets in relevant literature to help environmental scientists deepen their understanding of the construction of MPs datasets. Commonly used ML algorithms are analyzed from the perspective of interpretability and the need for computer facilities. Additionally, methods for improving and evaluating ML model performance, such as dataset pre-processing, model optimization, and model assessment metrics, are discussed. According to datasets and characterization techniques, MPs identification using ML was divided into three categories in this work: spectral identification, image identification, and spectral imaging identification. Finally, other applications of ML in MPs studies, including toxicity analysis, pollutants adsorption, and microbial colonization, are comprehensively discussed, which reveals the great application potential of ML. Based on the discussion above, this review suggests an algorithm selection strategy to assist researchers in selecting the most suitable ML algorithm in different situations, improving efficiency and decreasing the costs of trial and error. We believe that this work sheds light on the application of ML in MPs study.

Surface change of microplastics in aquatic environment and the removal by froth flotation assisted with cationic and anionic surfactants.

Microplastics (MPs) are increasingly released into the environment due to the widespread usage and improper management of plastics. Considerable research efforts have been devoted to the remediation of MPs. Froth flotation has been demonstrated as an effective method to remove MPs in water and sediment. However, there is a lack of knowledge on the regulation of the hydrophobicity/hydrophilicity of MPs surfaces. We found that exposure to the natural environment resulted in the increased hydrophilicity of MPs. The flotation efficiencies of polyvinyl chloride (PVC), polypropylene (PP), polystyrene (PS), and polyethylene glycol terephthalate (PET) MPs decreased to zero after six months of natural incubation in rivers. According to various characterizations, the hydrophilization mechanism is mainly correlated with surface oxidation and the deposition of clay minerals. Inspired by surface wettability conversion, we applied surfactants (collectors) to enhance MPs hydrophobicity and flotation efficiency. Anionic sodium oleate (NaOL) and cationic dodecyl trimethyl ammonium chloride (DTAC) were used to regulate surface hydrophobicity. The effects of collector concentration, pH, conditioning time, and metal ions on MPs flotation were thoroughly elucidated. Characterizations and adsorption experiments were performed to describe the heterogeneous adsorption of surfactants on MPs surfaces. The interaction between surfactants and MPs was explained through density functional theory (DFT) simulations. The dispersion energy between hydrophobic hydrocarbon chains attracts collectors on the MPs surface, and the collector molecules wrap and laminate to MPs surfaces. Flotation using NaOL exhibited a higher removal efficiency, and NaOL was environmentally friendly. Subsequently, we investigated the activation of Ca2+, Fe3+, and Al3+ to further improve the collecting efficiency of NaOL. Under the optimized conditions, MPs in natural rivers could be removed by froth flotation. This study shows the great promise of froth flotation for the application of MPs removal.

The link between increased Desulfovibrio and disease severity in Parkinson's disease.

Parkinson's disease (PD), a progressive and incurable neurodegenerative disease, has taken a huge economic toll and medical burden on our society. Increasing evidence has shown a strong link between PD and the gut microbiome, but studies on the relationship between the gut microbiome and the severity of PD are limited. In this study, 90 fecal samples were collected from newly diagnosed and untreated patients with PD (n = 47) and matched healthy control subjects (n = 43). The 16S rRNA amplicon and shotgun metagenomic sequencing was performed, aiming to uncover the connection between the gut microbiome and disease severity in PD. The results showed that Desulfovibrio was significantly increased in PD compared to healthy controls and positively correlated with disease severity. The increase in Desulfovibrio was mainly driven by enhanced homogeneous selection and weakened drift. Moreover, through metagenome-assembled genomes (MAGs) analysis, a Desulfovibrio MAG (MAG58) was obtained which was also positively correlated with disease severity. MAG58 possesses a complete assimilatory sulfate reduction pathway and a near-complete dissimilatory sulfate reduction pathway to produce hydrogen sulfide which may influence the development of PD. Based on these results, a potential pathogenic mechanism was presented to illustrate how the increased Desulfovibrio accelerates the development of PD by producing excessive hydrogen sulfide. The present study highlighted the vital role of Desulfovibrio in the development of PD, which may provide a new target for the diagnosis and treatment of PD. KEY POINTS: • The evidence for the link between increased Desulfovibrio and disease severity in PD • A Desulfovibrio MAG was obtained which was correlated with PD • A model was presented to illustrate how increased Desulfovibrio causes PD.

Clinical features and genetic spectrum of Chinese patients with hereditary spastic paraplegia: A 14-year study.

Background: Hereditary spastic paraplegia (HSP) constitutes a group of clinically and genetically rare neurodegenerative diseases characterized by progressive corticospinal tract degeneration. The phenotypes and genotypes of HSP are still expanding. In this study, we aimed to analyse the differential diagnosis, clinical features, and genetic distributions of a Chinese HSP patients in a 14-year cohort and to improve our understanding of the disease. Methods: The clinical data of patients with a primary diagnosis of HSP at the initial visit to the Department of the Neurology, Peking University Third Hospital, from 2008 to 2022 were retrospectively collected. Next-generation sequencing gene panels (NGS) combined with a multiplex ligation-amplification assay (MLPA) were conducted. Epidemiological and clinical features and candidate variants in HSP-related genes were analyzed and summarized. Results: 54 cases (probands from 25 different pedigrees and 29 sporadic cases) from 95 patients with a primary diagnosis of HSP were finally confirmed to have a clinical diagnosis of HSP based on clinical criteria, including their clinical findings, family history and long-term follow-up. Earlier disease onset was associated with longer diagnostic delay and longer disease duration and was associated with a lower risk of loss of ability to walk independently. In addition, 20 candidate variants in reported HSP-related genes were identified in these clinically diagnosed HSP patients, including variants in SPAST, ALT1, WASHC5, SPG11, B4GALNT1, and REEP1. The genetic diagnostic rate in these 54 patients was 35.18%. Conclusion: Hereditary spastic paraplegia has high clinical and genetic heterogeneity and is prone to misdiagnosis. Long-term follow-up and genetic testing can partially assist in diagnosing HSP. Our study summarized the clinical features of Chinese HSP patients in a 14-year cohort, expanded the genotype spectrum, and improved our understanding of the disease.

A case report of neuronal intranuclear inclusion disease with paroxysmal peripheral neuropathy-like onset lacking typical signs on diffusion-weighted imaging.

Background: Neuronal intranuclear inclusion disease (NIID) is a slowly progressive neurodegenerative disease characterized by eosinophilic hyaline intranuclear inclusions and the GGC repeats in the 5'-untranslated region of NOTCH2NLC. The prevalent presence of high-intensity signal along the corticomedullary junction on diffusion-weighted imaging (DWI) helps to recognize this heterogeneous disease despite of highly variable clinical manifestations. However, patients without the typical sign on DWI are often misdiagnosed. Besides, there are no reports of NIID patients presenting with paroxysmal peripheral neuropathy-like onset to date. Case presentation: We present a patient with NIID who suffered recurrent transient numbness in arms for 17 months. Magnetic resonance imaging (MRI) showed diffuse, bilateral white matter lesions without typical subcortical DWI signals. Electrophysiological studies revealed mixed demyelinating and axonal sensorimotor polyneuropathies involving four extremities. After excluding differential diagnosis of peripheral neuropathy through body fluid tests and a sural nerve biopsy, NIID was confirmed by a skin biopsy and the genetic analysis of NOTCH2NLC. Conclusion: This case innovatively demonstrates that NIID could manifest as paroxysmal peripheral neuropathy-like onset, and addresses the electrophysiological characteristics of NIID in depth. We broaden the clinical spectrum of NIID and provide new insights into its differential diagnosis from the perspective of peripheral neuropathy.

A review of disposable facemasks during the COVID-19 pandemic: A focus on microplastics release.

The COVID-19 epidemic seriously threats the human society and provokes the panic of the public. Personal Protective Equipment (PPE) are widely utilized for frontline health workers to face the ongoing epidemic, especially disposable face masks (DFMs) to prevent airborne transmission of coronavirus. The overproduction and massive utilization of DFMs seriously challenge the management of plastic wastes. A huge amount of DFMs are discharged into environment, potentially induced the generation of microplastics (MPs) owing to physicochemical destruction. The MPs release will pose severe contamination burden on environment and human. In this review, environmental threats of DFMs regarding to DFMs fate in environment and DFMs threats to aquatic and terrestrial species were surveyed. A full summary of recent studies on MPs release from DFMs was provided. The knowledge of extraction and characterizations of MPs, the release behavior, and potential threats of MPs derived from DFMs was discussed. To confront the problem, feasible strategies for control DFMs pollution were analyzed from the perspective of source control and waste management. This review provides a better understanding the threats, fate, and management of DFMs linked to COVID-19 pandemic.

Insight into the microplastics release from disposable face mask: Simulated environment and removal strategy.

The fight against the COVID-19 epidemic significantly raises the global demand for personal protective equipment, especially disposable face masks (DFMs). The discarded DFMs may become a potential source of microplastics (MPs), which has attracted much attention. In this work, we identified the detailed source of MPs released from DFMs with laser direct infrared spectroscopy. Polypropylene (PP) and polyurethane (PU) accounted for 24.5% and 57.1% of released MPs, respectively. The melt-blown fabric was a dominant MPs source, however, previous studies underestimated the contribution of mask rope. The captured polyethylene terephthalate (PET), polyamide (PA), polyethylene (PE), and polystyrene (PS) in airborne only shared 18.4% of released MPs. To deepen the understanding of MPs release from medical mask into the aquatic environment, we investigated the effects of environmental factors on MPs release. Based on regression analysis, the effects of temperature, incubation time, and wearing time significantly affect the release of MPs. Besides, acidity, alkalinity, sodium chloride, and humic acid also contributed to the MPs release through corroding, swelling, or repulsion of fibers. Based on the exposure of medical mask to simulated environments, the number of released MPs followed the order: seawater > simulated gut-fluid > freshwater > pure water. Considering the risk of MPs released from DFMs to the environment, we innovatively established a novel flotation removal system combined with cocoamidopropyl betaine, achieving 86% removal efficiency of MPs in water. This work shed the light on the MPs release from DFMs and proposed a removal strategy for the control of MPs pollution.

Is the presence of Cu(II) and p-benzoquinone a challenge for the removal of microplastics from landfill leachate?

A large number of plastic wastes generated eventually end up in landfills. The leachate from landfills has become a potential destination for microplastics (MPs). Many researchers have turned their attention to the distribution of MPs in landfill leachate. However, rare researchers mentioned that the efficient removal of MPs in landfill leachate was hard to realized. In this work, we analyzed MPs distribution and composition in leachate from a municipal landfill. Subsequently, to understand the causes of hydrophilization of MPs in leachate, we investigated the flotation percentage of polyvinyl chloride (PVC), polyethylene terephthalate (PET), and polystyrene (PS) MPs when exposure to p-benzoquinone and Cu2+. We conducted experiments on factors including the concentration of pollutants, pH, and interaction time. Meanwhile, the adsorption kinetics, adsorption isotherms, and synergistic effects of p-benzoquinone and Cu2+ were further investigated. The order of the strength of the hydrophilic effect of contaminants on MPs in leachate was p-benzoquinone + Cu2+ > p-benzoquinone > Cu2+. The physisorption and chemisorption of p-benzoquinone and Cu2+ on the MPs surface, respectively, resulted in the hydrophilization of the MPs surface. The order of hydrophilization and the adsorption capacity for pollutants of the three MPs were consistent: PVC > > PET ≈ PS. We proposed a feasible scheme with the oleic acid to restore the hydrophobicity of MPs, which could increase the removal rate of MPs by 87.37 %. This work revealed the hydrophilization effects of pollutants on MPs and proposed a novel insight into the MPs removal from landfill leachate.

Biochar-based slow-release of fertilizers for sustainable agriculture: A mini review.

Increasing global population and decreasing arable land pose tremendous pressures to agricultural production. The application of conventional chemical fertilizers improves agricultural production, but causes serious environmental problems and significant economic burdens. Biochar gains increasing interest as a soil amendment. Recently, more and more attentions have been paid to biochar-based slow-release of fertilizers (SRFs) due to the unique properties of biochar. This review summarizes recent advances in the development, synthesis, application, and tentative mechanism of biochar-based SRFs. The development mainly undergoes three stages: (i) soil amendment using biochar, (ii) interactions between nutrients and biochar, and (iii) biochar-based SRFs. Various methods are proposed to improve the fertilizer efficiency of biochar, majorly including in-situ pyrolysis, co-pyrolysis, impregnation, encapsulation, and granulation. Considering the distinct features of different methods, the integrated methods are promising for fabricating effective biochar-based SRFs. The in-depth understanding of the mechanism of nutrient loading and slow release is discussed based on current knowledge. Additionally, the perspectives and challenges of the potential application of biochar-based SRFs are described. Knowledge surveyed from this review indicates that applying biochar-based SRFs is a viable way of promoting sustainable agriculture.

Stepwise flotation separation of WEEE plastics by polymeric aluminum chloride towards source control of microplastics.

The mismanagement of waste electrical and electronic equipment (WEEE) resulted in numerous discarded plastics in the natural environment, and these waste plastics might experience aging, breaking, and migration, which becomes a crucial microplastic source. Sustainable management of WEEE plastics presents a considerable opportunity for resource recovery and microplastic pollution prevention. Flotation separation is a significant process of mechanical recycling, while most flotation methods can only deal with binary plastic mixtures. In this work, an advanced, stepwise, and sustainable flotation method was advocated to separate multi-plastics by polymeric aluminum chloride (PAC) modification. The abundant hydrophilic groups and environmental friendliness of PAC prompted us to further investigate the wetting effect. PAC had varied hydrophilization effects on acrylonitrile butadiene styrene (ABS) and polystyrene (PS) surfaces, but polyethylene terephthalate (PET) retained hydrophobicity. Treatment conditions, including PAC dosage, temperature, time, and pH were optimized. 100% of PET could be purified after primary separation, and the purities of ABS and PS could reach 100% and 97.4% after secondary separation, respectively. The strength of the interaction was determined by the different surface potentials and functional groups. In PAC solution, long-chain molecules or ions might interact with plastic surfaces electrostatically, and Al3+ could bridge long-chain molecules and plastic surfaces, thereby strengthening the polymer hydrophilicity. We further improved the PAC treatment process, and the reuse of PAC reduced modifier usage to 84.4 g/ton waste plastics, which was cost-effective in industrial applications. A preliminary evaluation of the energy consumption and environmental impact indicated that PAC treatment was superior to other modification methods. This work is an initial attempt at the stepwise separation of waste plastic and shows promising prospects for recycling plastic waste.

Pathological Role of Natural Killer Cells in Parkinson's Disease: A Systematic Review.

Parkinson's disease (PD) is one of the common neurodegenerative diseases that is characterized by selective degeneration of dopaminergic neurons in the substantia nigra, and misfolding of α-synuclein into aggregates is thought to contribute to its pathology. Studies have shown that immune-inflammatory responses are involved in the development of PD and play an important role in α-synuclein scavenge. Natural killer (NK) cells are first responders in immune cells and can directly promote immune defense mechanisms by cytotoxicity and by secreting cytokines. Recent discoveries suggest that NK cells are increasingly recognized in the pathological features of PD. However, the mechanisms underlying it have not been fully understood. In this review, we systematically retrieved and evaluated published evidence about the functions of NK cells in PD. We find alterations in the number of NK cells and cytotoxicity during the progression of PD, and it seems that NK cells play a neuroprotective role in PD pathogenesis, which may further reveal novel targets for the management and treatment of PD.

Different electrophysiology patterns in GNE myopathy.

BACKGROUND: GNE myopathy is a rare distal myopathy caused by mutations of the GNE gene. A few cases of GNE myopathy accompanied by neurogenic features of electrophysiology mimicking hereditary motor neuropathy were reported recently. We confirmed this feature and described the clinical phenotype and mutations of GNE myopathy in these rare cases. RESULTS: The absence of lower limb tendon reflexes, decreased compound muscle action potentials in lower leg motor nerves, and neurogenic pattern of electromyography suggested neuropathy in four patients. However, muscle pathology revealed a predominantly myogenic pattern. The follow-up electroneurography results implied that the compound motor action potential amplitudes deteriorated over time. Next-generation sequencing identified three novel variants of the GNE gene, c.2054T > C (p.Val685Ala), c.424G > A (p.Gly142Arg) and c.944T > C (p.Phe315Ser), as well as two hotspot mutations, c.115C > T(p.Arg39*) and c.620A > T(p.Asp207Val), in these patients. These novel mutations cosegregated with disease in the family. CONCLUSIONS: These rare cases supported the existence of neurogenic features of electrophysiology different from the typical myopathic pattern of GNE myopathy.

Flotation separation of hazardous polyvinyl chloride towards source control of microplastics based on selective hydrophilization of plasticizer-doping surfaces.

As the single largest chlorine source of plastics, hazardous polyvinyl chloride (PVC) has become an increasing environmental concern with the rapid microplastics accumulation. An advanced separation method is advocated to purify waste PVC plastics, optimize physical recycling, and protect aquatic and terrestrial environment safety. In this study, we proposed a novel scheme for the flotation separation of PVC plastics with diverse plasticizer contents (PVCs) via regulating hydrophilicity based on a selective ferric deposition. Rigid PVCs were prone to loading ferric ions and generating hydrophilic shells than flexible PVCs. Plasticizers can diffuse freely through the interior and surface of PVC plastics. Abundant plasticizers thereby overlaid the surface of flexible PVC and shielded PVC matrix from ferric ions. By regulating the ferric concentration, the wettability of PVCs was adjusted to separate rigid and flexible PVCs by froth flotation. Waste PVCs could also be separated from each other through the compound process of ferric deposition and flotation, further confirming its feasibility and stability. Thus far, this study supplies distinctive insights into the wettability regulation of plasticizer-doping PVC surfaces, contributes a pioneering hydrophilization method to PVCs separation and recycling, and mitigates hazardous PVC microplastics by source control.

The Genotype and Phenotype Features in a Large Chinese MFN2 Mutation Cohort.

Introduction: Charcot-Marie-Tooth disease type 2A (CMT2A) is a group of clinically and genetically heterogeneous disorders, which is mostly caused by mutations of the mitofusin2 (MFN2) gene. As the genotype-phenotype characteristics of CMT2A were still incompletely understood, we further explored the spectrum of CMT2A variants in China and demonstrated their phenotypic diversities. Methods: A total of 402 index patients/families with CMT throughout Mainland China were enrolled in this study. Among them, we analyzed 20 unrelated index cases with CMT2A by Sanger sequencing, next-generation sequencing, or whole-exome sequencing. Detailed clinical and genetic features of CMT2A patients were collected and analyzed. Of note, de novo mutations were not rare in MFN2 gene; we compared the clinical features of patients from the de novo group with those from the non-de novo group. Results: We identified 20 MFN2 variants, occupying 5.0% of CMT. Most patients presented with early onset and moderate phenotype with abnormal gait and foot drop as the main complaints at onset. Pyramidal signs accounts for 31.6% (6/19) in all patients, which is not uncommon. Four novel variants (p.Tyr752*, c.475-2A>G, p.Val99Met, and p.Arg275_Gln276insArg) were identified in the cohort. Besides, de novo variants occupied 35.0% (7/20) in our study with a much earlier age at onset compared with those in the non-de novo group (p = 0.021). Conclusion: Chinese CMT2A is a predominant typical pure CMT2A, with early onset and mild to moderate phenotype. Given the high frequency of de novo MFN2 mutations, genetic study should be considered for patients with early onset and severe idiopathic axonal neuropathy.

A clean and efficient flotation towards recovery of hazardous polyvinyl chloride and polycarbonate microplastics through selective aluminum coating: Process, mechanism, and optimization.

Polyvinyl chloride (PVC) and polycarbonate (PC) microplastics are major sources of hazardous chlorine and bisphenol A, threatening the ecosystem and environment. Plastic recycling can control the source of microplastics pollution, but the recycling of PVC and PC will be prevented by invalid separation. We established a novel and clean flotation method to separate PVC and PC microplastics by using aluminum coating. Trace amounts of Al(OH)3 can selectively coat the PVC microplastics surface due to its strong affinity for PVC. The contact angle of PVC decreases by 24° due to abundant hydroxyl groups of Al(OH)3 coating, whereas PC remained hydrophobic. Response surface methodology (RSM) combining Box-Behnken design (BBD) is used to optimize modification. A quadratic model is established to predict PC purity, explore the interaction between pH, aluminum chloride concentration, and ultrasonic duration. The recovery and purity of microplastics can exceed 99.65% with parameter optimization. The effects of multi-component, brand, shape, size, and mass ratio of plastics are utilized to evaluate the application potential. The suitable situations and limits of this method are disclosed. The aluminum coating offers significant benefits over other modifications in terms of reaction temperature, treatment time, and pollution prevention. Flotation based on aluminum coating provides a new insight for separating and recycling microplastics.