Impact of Packaging Methods Coupled with High Barrier Packaging Loaded with TiO2 on the Preservation of Chilled Pork.

This study investigated the impact of packaging methods coupled with high barrier packaging loaded with titanium dioxide (TiO2) on the quality of chilled pork. The experiment consisted of three treatment groups: air packaging (AP), vacuum packaging (VP), and vacuum antibacterial packaging (VAP). Changes in total viable count (TVC), pH value, total volatile basic nitrogen (TVB-N) value, sensory attributes, and water holding capacity of pork were analyzed at 0, 3, 6, 9, and 12 d. TVC of the VAP group was 5.85 Log CFU/g at 12 d, which was lower than that of AP (6.95 Log CFU/g) and VP (5.93 Log CFU/g). The antibacterial film incorporating TiO2 effectively inhibited microorganism growth. The VAP group exhibited the lowest pH value and TVB-N value among all the treatment groups at this time. The findings demonstrated that the application of VAP effectively preserved the sensory attributes of pork, the hardness, cohesiveness and adhesiveness of pork in VAP group were significantly superior than those in AP group (p<0.05), but not significantly compared with VP group. On the 12 d, the CIE a* value of pork in VAP group was significantly higher (p<0.05). This exhibited that VAP could effectively maintain the freshness of chilled pork and extend the shelf life for 3 d compared to the AP group. These findings provide empirical evidence to support the practical implementation of TiO2-loaded packaging film in the food industry.

Altimella gen. nov., a new genus of Cicurinidae (Arachnida, Araneae) from Xizang, China, with description of two new species.

Altimella Wang & Zhang, gen. nov., a new genus belonging to Cicurinidae, is established, and two new species are described, Altimellanedong Wang & Zhang, sp. nov. (♂♀, type species) and A.ngamring Wang & Zhang, sp. nov. (♂♀), from Xizang, China. Detailed descriptions of somatic features and genital characteristics, photos of the habitus, photos and drawings of the copulatory organs, and a distribution map are provided.

Influence of sources and atmospheric processes on metal solubility in PM2.5 in urban Guangzhou, South China.

Water-soluble metals exert a significant influence on human and ecosystem health. In this study, a comprehensive investigation was undertaken to elucidate the solubilities of metals in PM2.5 and potential influencing factors during the dry season of 2019-2020 in urban Guangzhou, South China. The observed average solubility was <20 % for Al, Fe, Sn, and Ti; 20-40 % for V, Cr, Sb, Pb, and Ni; 40-60 % for Ba and Cu; and 60-80 % for Zn, As, Se, Cd, and Mn. Metals (Al, Ti, and Fe) originated from crustal sources (e.g., soil dust) have much lower solubilities than those (Mn, Zn, As, Se, Cd, and Ba) from fossil fuel combustion sources (e.g., traffic emission, coal combustion), suggesting the dominant role the metal sources played on solubility. Enhanced solubilities of Cu, As, Se, Cd, Sn, Sb, and Pb were associated with aerosol acidity, while those of V, Cr, Mn, Ni, Zn, and Ba were linked to organic acid complexation. For the three crustal metals, the solubilities of Al and Ti primarily depended on aerosol acidity, whereas the solubility of Fe depended on both aerosol acidity under pH < 2 conditions and organic acid complexation under pH > 2 conditions. These findings underscore the primary influence of inherent properties of the metals on their solubility and reveal the varying impacts of atmospheric physicochemical processes, with changes in their solubilities being <10 % for Cd, Sn, Sb, and Pb, 10-20 % for Cu, Cr, Mn, Ni, and Ba, and 20-30 % for As, Se, and Zn.

Dietary Effect of Curcumin on Amino Acid, Fatty Acid, and Volatile Compound Profiles of Chicken Meat.

This study investigated the dietary effect of curcumin (CUR) on amino acid, 5'-nucleotides, fatty acid, and volatile compound profiles of chicken meat. A total of 400 healthy 1-day-old broiler male chicks were divided into 4 groups (n = 10) and fed either a basal diet or a diet with the addition of CUR with concentrations of 100 mg/kg, 150 mg/kg, and 200 mg/kg for 43 days. The results show that the addition of CUR in chicken diets is conducive to promoting the deposition of amino acids and increasing the content of 5'-nucleotides in chicken meat, reducing the contents of saturated fatty acid (SFA) and C20:4 n6 but increasing the ratio between polyunsaturated fatty acid (PUFA) and SFA. In addition, the volatile compound profile shows that the main volatile compounds in chicken meat are aldehydes (including hexanal, heptanal, octanal, and nonanal), with significant increases in their contents observed among chickens in the CUR-intake group. Moreover, it has been found that (E, E)-2,4-nonadienal, trans-2-decenal, benzaldehyde, and trans-2-octenal in chicken meat can significantly increase its overall aroma, and the addition of CUR with 150 mg/kg had the best effect on improving nutritional quality and flavor of chicken meat. This study provides a basis for the comprehensive utilization of CUR as a feed additive with the potential to substitute antibiotics.

Fabrication and characterization of Karaya gum-based films reinforced with bacterial nanocellulose stabilized valerian root extract Pickering emulsion for lamb meat preservation.

A novel biodegradable film was fabricated by incorporating bacterial nanocellulose stabilized valerian root extract (VRE) Pickering emulsion into karaya gum with better antioxidant and antibacterial properties for lamb meat preservation. The valerian root extract Pickering emulsion (VPE) exhibited 98 ± 1.84 % encapsulating efficiency and excellent physical stability with an average particle size of 274.6 nm. The incorporation of VPE-5 into the film matrix increased its elongation at break (EAB), and improved water resistance and barrier properties against oxygen, water vapor, and UV light. Moreover, the antioxidant and anti-bacterial properties against S.aerous and E. coli were also improved based on VPE-5 concentration. The SEM images showed a uniform distribution of VPE-5 while FTIR and XRD revealed its compatibility with karaya gum, which improved its thermal stability. The active films showed a significant preservative effect by reducing the pH, total volatile basic nitrogen (TVB-N), thiobarbituric acid reactive substances (TBARS), and total viable count (TVC) value of lamb meat and maintained its texture and color during the storage period of 9 days at 4 °C. These results demonstrated the inclusion of VPE-5 into Karaya gum was a promising technique and offers a great potential application as a bioactive material in food packaging.

Seven new species of the subgenus Homoneura Malloch (Diptera, Lauxaniidae, Homoneura) from Jiangjin District, southwestern Chongqing, China.

Seven new species of the subgenus Homoneura are described, Homoneura (Homoneura) biconica Chen & Li, sp. nov., Homoneura (Homoneura) dilatata Chen & Li, sp. nov., Homoneura (Homoneura) jiangjinensis Chen & Li, sp. nov., Homoneura (Homoneura) microtricha Chen & Li, sp. nov., Homoneura (Homoneura) multiseta Chen & Li, sp. nov., Homoneura (Homoneura) serrulata Chen & Li, sp. nov., Homoneura (Homoneura) simianshana Chen & Li, sp. nov., which were collected from Jiangjin District, southwestern Chongqing, China and are assigned to the henanensis group. A key to all of the 53 species of this species group in China is presented.

Using celluloses to reinforce the optimized alginate film in wet state: Effect of cellulose types and cooking treatment.

Alginate (Alg) as co-extruded casing is of interest to the meat industry as replacers for natural sausage casing. However, these studies on the mechanical reinforcement of Alg-based film are still limited in the wet state (e.g. co-extrusion process). In this work, Alg-D with the highest viscosity-average molecular weight (1.12 × 105) was selected from four types of alginates based on the results of the viscosity of Alg solutions and film strength. Next, three celluloses (cellulose nanocrystals (CNC), cellulose nanofibers (CNF) and microfibrillated fiber (MFC)) were added to the Alg-D matrix at different concentrations. SEM showed that the cross section of the Alg-based films became more compact and uniform when the size of celluloses decreased. The tensile test revealed that the strength (TS) of Alg-based films exhibited an initial increase followed by a subsequent drop as the cellulose content rose. The best mechanical strengthening effect was the Alg-CNC film (1.16 MPa), which increased by 93.33 % compared with that of pure Alg. Cooking treatment could further enhance this trend. The opacity increased gradually with the increase of cellulose content, while these films were still transparent enough for food packaging. These findings would have potential applications in food packaging, especially co-extruded sausage casings.

Study on the mechanical and aging properties of an antibacterial composite resin loaded with fluoride-doped nano-zirconia fillers.

Preventing the occurrence of secondary caries serves as one of the significant issues in dental clinic, thus make it indispensable to improving the properties of conventional composite resin (CR) by developing a novel CR. In present study, two groups of experimental CRs loaded with different contents of fluoride-doped nano-zirconia fillers (25 wt% and 50 wt%) were fabricated. The surface topography, mechanical performance, fluoride release, antibacterial effect, aging property and cytotoxicity of the experimental CRs were evaluated subsequently. A uniform distribution of the F-zirconia fillers over the whole surface of resin matrix could be observed. The experimental CRs showed continuous fluoride release within 28 days, which was positively correlated with the content of F-zirconia fillers. Moreover, the amount of fluoride release increased in the acidic buffer. Addition of F-zirconia fillers could improve the color stability, wear resistance and microhardness of the experimental CRs, without reducing the flexure strength. Furtherly, the fluoride ions released continuously from the experimental CRs resulted in effective contact and antibacterial properties, while they showed no cytotoxicity. As a consequence, considerations can be made to employ this new kind of composite resin loaded with fluoride-doped nano-zirconia fillers to meet clinical requirements when the antimicrobial benefits are desired.

First record of the spider family Trechaleidae Simon, 1890 (Araneae) from China.

The family Trechaleidae Simon, 1890 is reported for the first time from China, including one new species: Shinobiuscona sp. nov. (♂♀). Morphological descriptions, photos and illustrations of the new species are provided. Taxonomic features of species belonging to the genus are briefly discussed. Photos of the female of Shinobiusorientalis (Yaginuma, 1967) are also presented to compare it with the new species.

New insights into the influences of firework combustion on molecular composition and formation of sulfur- and halogen-containing organic compounds.

Firework (FW) events occur during various festivals worldwide and substantially negatively influence both air quality and human health. However, the effects of FWs on the chemical properties and formation of organic aerosols are far from clear. In this study, fine particulate matter (PM2.5) samples were collected in a suburban area in Qingdao, China during the Chinese Spring Festival. The concentrations of chemical species (especially carbonaceous components) in PM2.5 were measured using a combination of several state-of-the-art techniques. Our results showed that mass concentrations of water-soluble sulfate, potassium and chloride ions, and organic carbon drastically increased and became the predominant components in PM2.5 during FW events. Correspondingly, both the number and fractional contributions of sulfur (S)-containing subgroups (e.g., CHOS and CHONS compounds) and some chlorine (Cl)-containing organic (e.g., CHOSCl and CHONSCl) compounds identified using ultrahigh-resolution Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) increased. The S- and Cl-containing compounds unique to the FW display period were identified, and their chemical characterization, sources, and formation mechanisms were elucidated by combining FT-ICR MS and quantum chemical calculations. Our results suggest that FW emissions play notable roles in both primary and secondary organic aerosol formation, especially for CHOS- and Cl-containing organic compounds.

Decorin in the spatial control of collagen mineralization.

Understanding the molecular mechanism by which the periodontal ligament (PDL) is maintained uncalcified between two mineralized tissues (cementum and bone) may facilitate the functional repair and regeneration of the periodontium complex, disrupted in the context of periodontal diseases. However, research that explores the control of type I collagen (COL I) mineralization fails to clarify the detailed mechanism of regulating spatial collagen mineralization, especially in the periodontium complex. In the present study, decorin (DCN), which is characterized as abundant in the PDL region and rare in mineralized tissues, was hypothesized to be a key regulator in the spatial control of collagen mineralization. The circular dichroism results confirmed that DCN regulated the secondary structure of COL I, and the surface plasmon resonance results indicated that COL I possessed a higher affinity for DCN than for other mineralization promoters, such as DMP-1, OPN, BSP and DSPP. These features of DCN may contribute to blocking intrafibrillar mineralization in COL I fibrils during the polymer-induced liquid-precursor mineralization process when the fibrils are cross-linked with DCN. This effect was more remarkable when the fibrils were phosphorylated by sodium trimetaphosphate, as shown by the observation of a tube-like morphology via TEM and mineral sheath via SEM. This study enhances the understanding of the role of DCN in mineralization regulation among periodontal tissues. This provides insights for the development of biomaterials for the regeneration of interfaces between soft and hard tissues.

Ant-eating spiders from Xizang, China (Araneae, Zodariidae).

Six species of the ant-eating spider of the family Zodariidae are described from Xizang, China, including five new species: Asceuachayusp. nov. (♀), A.dawaisp. nov. (♂♀), Mallinellamigusp. nov. (♂), M.mеdogsp. nov. (♂♀), and M.yadongsp. nov. (♂♀). The female of Cydrelalinzhiensis (Hu, 2001) is described here for the first time. Descriptions and photographs of all the species are provided.

Two new species and one new record of Ischnothyreus Simon, 1893 (Araneae, Oonopidae) from China.

Background: Ischnothyreus Simon, 1893 is a large genus of oonopid spiders that currently contains 126 species, amongst which, 28 have been recorded in China. New information: Two new Ischnothyreus species, Ischnothyreusdaheling Tong & Zhang, sp. nov. and Ischnothyreuslongyang Tong & Zhang, sp. nov., are described, based on specimens collected from Yunnan Province and Ischnothyreusvelox Jackson, 1908 is recorded in China for the first time, based on material collected from Guangxi Province. All three species are illustrated.

A new genus and three new species of Hahniidae (Araneae) from China.

A new genus of comb-tailed spider (Hahniidae), Sinahahniagen. nov., is described based on three new species from the high-altitude areas of China: Sinahahniaeyusp. nov. (♂♀, Chongqing and Hubei), S.fanjingshansp. nov. (♂♀, Guizhou), and S.yintiaolingsp. nov. (♀, Chongqing). Digital images, illustrations, and a distribution map are provided.

Enhancing the annual yield via nitrogen fertilizer application optimization in the direct seeding ratoon rice system.

Direct seeding ratoon rice (DSRR) system is a planting method that can significantly increase grain yield, improving light and temperature utilization efficiency and reducing labor input. However, the current nitrogen fertilizer management method which does not aim at the seedling emergence and development characteristics of DSRR just is only based on the traditional method of transplanting ratoon rice, and which is not conducive to the population development and yield improvement. To determine the suitable nitrogen fertilizer application optimization, we set four nitrogen fertilizer application treatments (N0, no nitrogen fertilizer; N1, traditional nitrogen fertilizer; N2, transferring 20% of total nitrogen from basal fertilizer to tillering stage; N3, reducing total nitrogen by 10% from N2 tillering fertilizer) on a hybrid rice "Fengliangyouxiang1 (FLYX1)" and an inbred rice "Huanghuazhan (HHZ)" under DSRR. The effects of treatments on dry matter accumulation, root growth and vigor, leaf area index, leaf senescence rate and yield were investigated. Our results demonstrated that the yield of main crop in N2 treatment was the highest, which was 63.3%, 6.6% and 8.8% higher than that of N0, N1 and N3 treatment, respectively, mainly due to the difference of effective panicle and spikelets number per m2. The average of two years and varieties, the annual yield of N2 was significant higher than that of N1 and N3 by 4.94% and 8.55%, respectively. However, there was no significant difference between the annual yields of N1 and N3. N2 treatment had significant effects on the accumulation of aboveground dry matter mass which was no significant difference in 20 days after sowing(DAS), but significant difference in 50 DAS. Meanwhile, the root activity and the leaf senescence rate of N2 treatment was significant lower than that of other treatments. In summary, "20% of total nitrogen was transferred from basal fertilizer to tillering stage" can improve the annual yield and main crop development of DSRR system. Further reducing the use of nitrogen fertilizer may significantly improve the production efficiency of nitrogen fertilizer and improve the planting income in DSRR system.

Comprehensive Analyses of Four PhNF-YC Genes from Petunia hybrida and Impacts on Flowering Time.

Nuclear Factor Y (NF-Y) is a class of heterotrimeric transcription factors composed of three subunits: NF-A, NF-YB, and NF-YC. NF-YC family members play crucial roles in various developmental processes, particularly in the regulation of flowering time. However, their functions in petunia remain poorly understood. In this study, we isolated four PhNF-YC genes from petunia and confirmed their subcellular localization in both the nucleus and cytoplasm. We analyzed the transcript abundance of all four PhNF-YC genes and found that PhNF-YC2 and PhNF-YC4 were highly expressed in apical buds and leaves, with their transcript levels decreasing before flower bud differentiation. Silencing PhNF-YC2 using VIGS resulted in a delayed flowering time and reduced chlorophyll content, while PhNF-YC4-silenced plants only exhibited a delayed flowering time. Furthermore, we detected the transcript abundance of flowering-related genes involved in different signaling pathways and found that PhCO, PhGI, PhFBP21, PhGA20ox4, and PhSPL9b were regulated by both PhNF-YC2 and PhNF-YC4. Additionally, the transcript abundance of PhSPL2, PhSPL3, and PhSPL4 increased only in PhNF-YC2-silenced plants. Overall, these results provide evidence that PhNF-YC2 and PhNF-YC4 negatively regulate flowering time in petunia by modulating a series of flowering-related genes.

[High Resolution Emission Inventory of Greenhouse Gas and Its Characteristics in Guangdong，China].

Based on the typical city survey data and statistics of Guangdong Province， a 2018-based 3 km×3 km gridded greenhouse gas emissions inventory was developed for Guangdong Province using the combination of top-down and bottom-up emission factor methods. The inventory covered the CO2， CH4， and N2O emissions from energy， industrial processes， agriculture， land use change and forest， waste management， and indirect sources. The results showed that estimates for CO2， CH4， and N2O in Guangdong Province for the year 2018 were 8.5×108， 1.9×106， and 1.1×105 t， respectively， and 8.5×108， 4.0×107， and 3.4×107 t by equivalent carbon dioxide， totaling 9.2×108 t. CO2 was the main greenhouse gas in Guangdong Province， accounting for 92.0% of the total emissions. Energy and indirect sources were the main emission sources， accounting for 77.9% and 7.6%， respectively， totaling 85.5%. Spatial distributions illustrated that most grids were greenhouse gas emissions， whereas some others were greenhouse gas sinks； the greenhouse gas emissions were distributed mainly in the Pearl River Delta region and had certain characteristics of distribution along the road network and channels. The greenhouse gas grids of high emission were mainly the locations of high energy-consuming enterprises such as large power plants， steel mills， and cement plants.

Adjustable strength and toughness of dual cross-linked nanocellulose films via spherical cellulose as soft-phase.

Nanocellulose films possess numerous merits ascribing to their inherent biocompatibility, non-toxic and biodegradability properties. The potential for practical applications would be improved if their mechanical strength and toughness requirements could be met simultaneously. Herein, dual cross-linked nanocellulose (DC) film was fabricated by the treatments of chemical and physical cross-linking, which was mechanically superior to pure nanocellulose (CNF) films. To further increase the toughness of DC films, spherical cellulose (Sph) was incorporated into DC film (DC-Sph film), and analyzed under different humidity conditions (RH) (from 10 % to 90 %). The changes of functional groups of CNF, DC and DC-Sph films were detected by FTIR and XPS spectrum. The epichlorohydrin and Sph content were optimized, followed by the investigation of RH on the toughness of films. The highest tensile strength (146.6 ± 4.6 MPa) was obtained in DC film at 50 % RH, while the DC-Sph film showed the largest toughness (40.3 ± 3.7 kJ/m2) at 70 % RH. Furthermore, the possible toughening mechanism of DC-Sph film was also discussed.

Data-Driven Battery Characterization and Prognosis: Recent Progress, Challenges, and Prospects.

Battery characterization and prognosis are essential for analyzing underlying electrochemical mechanisms and ensuring safe operation, especially with the assistance of superior data-driven artificial intelligence systems. This review provides a unique perspective on recent progress in data-driven battery characterization and prognosis methods. First, recent informative image characterization and impedance spectrum as well as high-throughput screening approaches on revealing battery electrochemical mechanisms at multiple scales are summarized. Thereafter, battery prognosis tasks and strategies are described, with the comparison of various physics-informed modeling strategies. Considering unlocking mechanisms from tremendous battery data, the dominant role of physics-informed interpretable learning in accelerating energy device development is presented. Finally, challenges and prospects on data-driven characterization and prognosis are discussed toward accelerating energy device development with much-enhanced electrochemical transparency and generalization. This review is hoped to supply new ideas and inspirations to the next-generation battery development.

The first record of Tricholathys Chamberlin & Ivie, 1935 (Araneae, Dictynidae) from China, with a new combination and descriptions of seven new species.

The genus Tricholathys, found for the first time in China, is surveyed and seven new species, T.burangensissp. nov. (♂♀, Thibet), T.chenzhenningisp. nov. (♂♀, Qinghai), T.hebeiensissp. nov. (♀, Hebei), T.lhunzeensissp. nov. (♂♀, Tibet), Tricholathysrelictoidessp. nov. (♂♀, Xinjiang), T.serratasp. nov. (♂♀, Tibet), and T.xizangensissp. nov. (♂♀, Tibet), are described. A new combination is proposed for Tricholathysalxa (Tang, 2011) comb. nov., ex. Argenna Thorell, 1870. Descriptions of all new species are provided, together with digital images, illustrations, and a distribution map. The DNA barcode information of four recently collected species is also provided.