Near-Infrared Light and Acid/Base Dual-Regulated Polymerization Utilizing Imidazole-Anion-Fused Perylene Diimides as Photocatalysts.

This work presents the first example of acid/base-responsive and near-infrared (NIR)-absorbing photocatalysts based on imidazole-anion-fused perylene diimide chromophores. The photocatalysts were in situ generated by deprotonation of imidazole-fused perylene diimide under an alkaline environment. NIR (λ = 730 nm, 128 mW/cm2) photoinduced atom transfer radical polymerization (ATRP) was implemented, exhibiting high efficiency and excellent livingness under ppm level of photocatalysts (15 ppm relative to monomer) and Cu(II) complex (10 ppm relative to monomer) concentrations. The method showed capabilities to polymerize behind opaque barriers (i.e., paper and pig skin) and under aerobic condition. Notably, this work demonstrated a dual temporal control of polymerization by adding weak base/acid and switching NIR light on/off. The polymerization can even be halted by bubbling CO2 and was then fully recovered by adding triethylamine. The NIR photoATRP of acrylamide monomers in aqueous solution was also performed, which can be regulated by the change of pH.

Synthesis of Hyperbranched Flame Retardants with Varied Branched Chains' Rigidity and Performance of Modified Epoxy Resins.

To overcome the high flammability and brittleness of epoxy resins without sacrificing their glass transition temperature (Tg) and mechanical properties, three epoxy-terminated hyperbranched flame retardants (EHBFRs) with a rigid central core and different branches, named EHBFR-HB, EHBFR-HCM, and EHBFR-HBM, were synthesized. After chemical structure characterization, the synthesized EHBFRs were introduced into the diglycidyl ether of bisphenol A (DGEBA) and cured with 4, 4-diaminodiphenylmethane (DDM). The compatibility, thermal stability, mechanical properties, and flame retardancy of the resultant resins were evaluated. Results showed that all three EHBFRs could significantly improve the fire safety of cured resins, and 30 wt. % of EHBFRs (less than 1.0 wt. % phosphorus content) endowed cured DGEBA with a UL-94 V-0 rating. In addition, the increased rigidity of branches in EHBFRs could increase the flexural strength and modulus of cured resins, and the branches with appropriate rigidity were also beneficial for improving their room temperature impact strength and Tg.

Exploring maleimide-anchored halloysites as nanophotoinitiators for surface-initiated photografting strategies.

Maleimide-functionalized HNTs (HNTs-I) were prepared and explored as a nanophotoinitiator. Vinyl monomers can be grafted onto the nanotubes following a spatially controllable, metal-free and non-contact photoinitiated approach. The obtained HNTs-I were further used in a 3D printing system to fabricate hydrogels with designed configurations.

Effective Synthesis of Ladder-type Oligo(p-aniline)s and Poly(p-aniline)s via Intramolecular SNAr Reaction.

Symmetric ladder-type oligo(p-aniline)s and poly(p-aniline)s were successfully synthesized by an intramolecular ring closure in a highly efficient SNAr reaction from oligo(p-phenylene)s and poly(p-phenylene)s with fluorine (F) and secondary amine (NH) groups. Unlike Cadogan ring closure, the newly designed cyclization reaction will not produce a mixture of symmetric and nonsymmetric structures. Moreover, the introduction of the F atom does not hinder Suzuki polymerization. The result indicates that preparing regular oligomers and polymers with a nitrogen bridge is possible.

A coumarin-containing Schiff base fluorescent probe with AIE effect for the copper(ii) ion.

A novel coumarin-derived Cu2+-selective Schiff base fluorescent "turn-off" chemosensor CTPE was successfully obtained, which showed an AIE effect. It could identify Cu2+ by quenching its fluorescence. The lower limit of detection was 0.36 µM. CTPE can act as a highly selective and sensitive fluorescence probe for detecting Cu2+.

Facile construction of a hyperbranched poly(acrylamide) bearing tetraphenylethene units: a novel fluorescence probe with a highly selective and sensitive response to Zn2.

Thermo-responsive hyperbranched copoly(bis(N,N-ethyl acrylamide)/(N,N-methylene bisacrylamide)) (HPEAM-MBA) was synthesized by using reversible addition-fragmentation chain-transfer polymerization (RAFT). Interestingly, the zinc ion (Zn2+) was found to have a crucial influence on the lowest critical solution temperature (LCST) of the thermo-responsive polymer. The tetraphenylethylene (TPE) unit was then introduced onto the backbone of the as-prepared thermo-responsive polymer, which endows a Zn2+-responsive "turn-off" effect on the fluorescence properties. The TPE-bearing polymer shows a highly specific response over other metal ions and the "turn-off" response can even be tracked as the concentration of Zn2+ reduces to 2 × 10-5 M. The decrement of fluorescence intensity was linearly dependent on the concentration of Zn2+ in the range of 4-18 µmol L-1. The flexible, versatile and feasible approach, as well as the excellent detection performance, may generate a new type of Zn2+ probe without the tedious synthesis of the moiety bearing Zn2+ recognition units.

A Novel Water-Soluble Fluorescence Probe with Wash-Free Cellular Imaging Capacity Based on AIE Characteristics.

A potential real-time imaging water-soluble fluorescent polymer (P3) is facilely prepared via one-pot method. For P3, tetraphenylethene unit serves as the fluorescent unit, poly(acryloyl ethylene diamine) (a kind of polyelectrolyte) with specific degree of polymerization acts as water-soluble part. 1 H-NMR, gel permeation chromatography (GPC), UV-vis spectroscopy, photoluminescence (PL), and confocal laser scanning microscopy are undertaken to characterize the structure and property of P3. The results of wash-free cellular imaging show that the signal-to-noise ratio is high as the concentration of P3 is 50 µg mL-1 . In addition, the pH-responsive and Cd2+ -responsive are also investigated in this paper. The results coming from pH-responsive show that P3 solution displays significant fluorescence under near neutral. And the result from the cellular imaging shows that intracellular fluorescence intensity enhances with the augment of concentration of Cd2+ , which reveals that P3 can give a hint to resolve the dilemma of traditional fluorescent dyes used as living cellular fluorescent probe.

A novel water-soluble fluorescent polymer based on perylene bisimides dyes: one-pot preparation and its bio-imaging.

Perylene bisimides dye-based water-soluble fluorescent polymer P3, N,N'-bis(3-amyl)-1-bromo-7-{4'-[3''-(S-poly(N-acryloyl ethylene diamine hydrochloride)-2'''-methyl propionic acid)propionyloxy hexyloxy]phenyl} perylene-3,4:9,10-tetracarboxylic bisimides, was synthesized with polyelectrolyte modification via one-pot reaction (the reduction reaction of trithioester and click reaction between the thiol group and carbon-carbon double bond were simultaneously conducted in one pot with high conversion). One-pot method can overcome the limitation that usual click reaction between thiol and other groups has low conversion because thiol group is subject to rapid oxidation during purification and storage. Chemical, structural, and optical properties of P3 and intermediate products were fully characterized by nuclear magnetic resonance spectroscopy, Fourier transform infrared, gel permeation chromatograph, UV-vis spectra, and fluorescence spectra, respectively. The results revealed that P3 displayed excellent water solubility and not only exhibited red strong fluorescence emission band in water but also had the similar photoluminescent spectra to those of intermediate products (M4 and P2) in chloroform. Allowing for the potential application in biological detection field, cell viability and live cell imaging with the presence of P3 were further investigated with Hela cells. The results showed that P3 had low cytotoxicity with strong intracellular fluorescence entry. Meanwhile, with the augment of concentration of P3 (0-0.500 mg mL(-1)), the cell uptake and accumulation of P3 increased and thereby result in enhancement of the intracellular fluorescence. These experiment results suggested that P3 had enormous potential as a fluorescence probe to be an important component in biological detection field.

The Synthesis of Backbone Thermo and pH Responsive Hyperbranched Poly(Bis(N,N-Propyl Acryl Amide))s by RAFT.

Hyperbranched poly(methylene-bis-acrylamide), poly(bis(N,N-propyl acryl amide)) (HPNPAM) and poly(bis(N,N-butyl acryl amide)) were synthesized by reversible addition-fragmentation chain transfer polymerization. HPNPAMs showed lower critical solution temperature (LCST) due to an appropriate ratio between hydrophilic and hydrophobic groups. The effects of reaction conditions on polymerization were investigated in detail. The structure of HPNPAM was characterized by ¹H NMR, FT-IR, Muti detector-size exclusion chromatography (MDSEC) and Ultravioletvisble (UV-Vis). The α value reached 0.20 and DB was 90%, indicating HPNPAMs with compact topology structure were successfully prepared. LCSTs were tuned by Mw and the pH value of the solution. The change of molecular size was assayed by dynamic light scattering and scanning electron microscope. These results indicated that the stable uniform nanomicelles were destroyed and macromolecules aggregated together, forming large particles as temperature exceeded LCST. In addition, after the cells were incubated for 24 h, the cell viability reached 80%, which confirmed this new dual responsive HPNPAM had low cytotoxicity.

Fabrication of a molecular-level multilayer film on organic polymer surfaces via chemical bonding assembly.

A fresh multilayer film was fabricated on a molecular level and successfully tethered to the surface of a hydroxylated organic substrate via chemical bonding assembly (CBA). Sulfate anion groups (SO4-) were preintroduced onto the surface of biaxially oriented polypropylene (BOPP) films via a reference method. Upon hydrolysis of the SO4- groups, hydroxyl groups (--OH) were formed that subsequently acted as initial reagents for a series of alternate reactions with terephthalyl chloride (TPC) and bisphenol A (BPA). A stable and well-defined multilayer film was thus fabricated via the CBA method. As a result of the nanoscale multilayer fresh film being abundant with reactive groups, it is believed that the film and its fabrication method should provide a fundamental platform for further surface functionalization and direct the design of advanced materials with desired properties.