Genetically determined blood pressure, antihypertensive drug classes, and frailty: A Mendelian randomization study.

Observational studies have suggested that the use of antihypertensive drugs was associated with the risk of frailty; however, these findings may be biased by confounding and reverse causality. This study aimed to explore the effect of genetically predicted lifelong lowering blood pressure (BP) through different antihypertensive medications on frailty. One-sample Mendelian randomization (MR) and summary data-based MR (SMR) were applied. We utilized two kinds of genetic instruments to proxy the antihypertensive medications, including genetic variants within or nearby drugs target genes associated with systolic/diastolic BP, and expression level of the corresponding gene. Among 298,618 UK Biobank participants, one-sample MR analysis observed that genetically proxied BB use (relative risk ratios, 0.76; 95% CI, 0.65-0.90; p = 0.001) and CCB use (0.83; 0.72-0.95; p = 0.007), equivalent to a 10-mm Hg reduction in systolic BP, was significantly associated with lower risk of pre-frailty. In addition, although not statistically significant, the effect directions of systolic BP through ACEi variants (0.72; 0.39-1.33; p = 0.296) or thiazides variants (0.74; 0.53-1.03; p = 0.072) on pre-frailty were also protective. Similar results were obtained in analyses for diastolic BP. SMR of expression in artery showed that decreased expression level of KCNH2, a target gene of BBs, was associated with lower frailty index (beta -0.02, p = 2.87 × 10-4). This MR analysis found evidence that the use of BBs and CCBs was potentially associated with reduced frailty risk in the general population, and identified KCNH2 as a promising target for further clinical trials to prevent manifestations of frailty.

Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images.

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

The evolution of robotics: research and application progress of dental implant robotic systems.

The use of robots to augment human capabilities and assist in work has long been an aspiration. Robotics has been developing since the 1960s when the first industrial robot was introduced. As technology has advanced, robotic-assisted surgery has shown numerous advantages, including more precision, efficiency, minimal invasiveness, and safety than is possible with conventional techniques, which are research hotspots and cutting-edge trends. This article reviewed the history of medical robot development and seminal research papers about current research progress. Taking the autonomous dental implant robotic system as an example, the advantages and prospects of medical robotic systems would be discussed which would provide a reference for future research.

A digital workflow for designing and manufacturing metal frameworks and removable partial dentures: A novel dental technique.

The purpose of this technical report is to demonstrate a fully digital workflow for designing and fabricating metal frameworks and removable partial dentures. After obtaining a digital cast of the dental arch with bilateral distal extension defect, computer-aided design software and 3D printing technology are used for the design and fabrication of the removable partial denture frameworks, denture teeth, and denture bases, instead of the traditional workflow. The assembly of the three components is facilitated through a meticulously structured framework. The technology, which prints metal frameworks, denture bases, and denture teeth through different processes with different materials, achieves full 3D printing technology for making removable partial dentures.

Four Parallel Pathways in T4 Ligase-Catalyzed Repair of Nicked DNA with Diverse Bending Angles.

The structural diversity of biological macromolecules in different environments contributes complexity to enzymological processes vital for cellular functions. Fluorescence resonance energy transfer and electron microscopy are used to investigate the enzymatic reaction of T4 DNA ligase catalyzing the ligation of nicked DNA. The data show that both the ligase-AMP complex and the ligase-AMP-DNA complex can have four conformations. This finding suggests the parallel occurrence of four ligation reaction pathways, each characterized by specific conformations of the ligase-AMP complex that persist in the ligase-AMP-DNA complex. Notably, these complexes have DNA bending angles of ≈0°, 20°, 60°, or 100°. The mechanism of parallel reactions challenges the conventional notion of simple sequential reaction steps occurring among multiple conformations. The results provide insights into the dynamic conformational changes and the versatile attributes of T4 DNA ligase and suggest that the parallel multiple reaction pathways may correspond to diverse T4 DNA ligase functions. This mechanism may potentially have evolved as an adaptive strategy across evolutionary history to navigate complex environments.

Associations of birth weight, plasma metabolome in adulthood and risk of type 2 diabetes.

AIMS: We aimed to examine the longitudinal associations of birth weight with plasma metabolites in adulthood, and further quantify the proportions of the links between birth weight and incident adult type 2 diabetes (T2D) that were mediated by plasma metabolites. MATERIALS AND METHODS: A total of 62,033 participants with complete nuclear magnetic resonance metabolomics and birth weight data from the UK Biobank were included in this study. Linear regression was used to assess the associations between birth weight and metabolites. Cox regression was used to estimate hazard ratios for T2D associated with metabolites. We further performed mediation analyses to estimate the extent to which metabolites might mediate the association between birth weight and T2D risk. RESULTS: Low birth weight was associated with the adverse metabolic responses across multiple metabolic pathways, including lipoprotein subclasses, amino acids, fatty acids (FA), and inflammation. Metabolites associated with higher birth weight tended to be associated with a lower risk of T2D (Pearson correlation coefficient: -0.85). A total of 62 metabolites showed statistically significant mediation effects in the protective association of higher birth weight and T2D risk, including large-sized very low-density lipoprotein particles and triglyceride concentrations as well as saturated, and monounsaturated FA and glycoprotein acetyls. CONCLUSIONS: We identified a range of metabolites that reflect the adult metabolic response to birth weight, some of which might lie on the pathway between birth weight and adult T2D risk.

Autonomous robotic system for the assisted immediate placement of a maxillary anterior implant: A clinical report.

Precise reproduction of the preoperatively designed 3-dimensional (3D) implant position is key to seating a prefabricated restoration and restoring esthetics. Static and dynamic computer-aided implant surgery (CAIS) based on the fusion of 3D imaging files have been used to improve implant accuracy. However, both techniques have shortcomings that can be remedied by a robotic system. This clinical report describes the immediate placement of an implant in the anterior esthetic zone by using an autonomous dental implant robotic system (ADIR).

Elevated blood remnant cholesterol and triglycerides are causally related to the risks of cardiometabolic multimorbidity.

The connection between triglyceride-rich lipoproteins and cardiometabolic multimorbidity, characterized by the concurrence of at least two of type 2 diabetes, ischemic heart disease, and stroke, has not been definitively established. We aim to examine the prospective associations between serum remnant cholesterol, triglycerides, and the risks of progression from first cardiometabolic disease to multimorbidity via multistate modeling in the UK Biobank. We also evaluate the causality of these associations via Mendelian randomization using 13 biologically relevant SNPs as the genetic instruments. Here we show that elevated remnant cholesterol and triglycerides are significantly associated with gradually higher risks of cardiometabolic multimorbidity, particularly the progression of ischemic heart disease to the multimorbidity of ischemic heart disease and type 2 diabetes. These results advocate for effective management of remnant cholesterol and triglycerides as a potential strategy in mitigating the risks of cardiometabolic multimorbidity.

Endodontic Microsurgery With an Autonomous Robotic System: A Clinical Report.

INTRODUCTION: Endodontic microsurgery (EMS) requires minimally invasive osteotomy and accurate root-end resection, which can be challenging in many instances. Evidence suggests that autonomous robotic systems can significantly enhance the precision of dental implantation. The aim of this case report is to introduce a novel EMS technique that employs robot-guided osteotomy and root resection procedures. METHODS: A 59-year-old man was diagnosed with previously treated, symptomatic apical periodontitis in the mandibular left first molar. Patient data were used to integrate a digital model into preoperative planning software to design the surgical plan. The robotic system utilizes spatial alignment techniques for registration, guiding the robotic arm to autonomously perform a 3-mm osteotomy and root-end resection, based on the surgical plan. After completing the resection, the clinician confirmed the absence of cracks or root fractures and subsequently performed root-end preparation and filling under a microscope. RESULTS: To the best of our knowledge, this case marks the first use of autonomous robotic assistance in EMS. CONCLUSIONS: Utilizing an autonomous robotic system could enable precise apicoectomy in patients with intact cortical plates, thus facilitating successful EMS procedures. This has the potential to minimize errors caused by operator inexperience and mitigate the risks associated with excessive bone removal.

Clinical evaluation of autonomous robotic-assisted full-arch implant surgery: A 1-year prospective clinical study.

OBJECTIVES: This prospective clinical study aimed to evaluate the accuracy and 1-year clinical follow-up performance of dental implant placement with an autonomous dental implant robot (ADIR) system in full-arch implant surgery. MATERIALS AND METHODS: Twelve patients with edentulous arches or final dentition received 102 implants using the ADIR system. Global platform deviation, global apex deviation, and global angular deviation between the planned and actual implants were calculated after surgery. Data were statistically analyzed for factors including jaws, implant positions, patient sequences, implant systems, and implant length. Surgery duration was recorded. Patients were followed for 3 months and 1 year after surgery. Periodontal parameters, buccal bone thickness (BBT), and facial vertical bone wall peak (IP-FC) were recorded. RESULTS: Among the 102 implants, the mean (SD) global platform deviation, global apex deviation, and global angular deviation were 0.53 (0.19) mm, 0.58 (0.17) mm, and 1.83 (0.82)°, respectively. The deviation differences between the mandible and maxilla did not show statistical significance (p > .05). No statistically significant differences were found for the jaws, implant positions, patient sequences, implant systems, and implant length to the deviations (p > .05). The periodontal parameters, the BBT, and IP-FC remained stable during 1-year follow-up. CONCLUSION: The ADIR system showed excellent positional accuracy. The 1-year follow-up after full-arch implant surgery indicated that the ADIR system could achieve promising clinical performance. Additional clinical evidence is requisite to furnish guidelines for the implementation of the ADIR system in full-arch implant surgery.

Plant size-dependent influence of foliar fungal pathogens promotes diversity through allometric growth.

The effect of pathogens on host diversity has attracted much attention in recent years, yet how the influence of pathogens on individual plants scales up to affect community-level host diversity remains unclear. Here, we assessed the effects of foliar fungal pathogens on plant growth and species richness using allometric growth theory in population-level and community-level foliar fungal pathogen exclusion experiments. We calculated growth scaling exponents of 24 species to reveal the intraspecific size-dependent effects of foliar fungal pathogens on plant growth. We also calculated the intercepts to infer the growth rates of relatively larger conspecific individuals. We found that foliar fungal pathogens inhibited the growth of small conspecific individuals more than large individuals, resulting in a positive allometric growth. After foliar fungal pathogen exclusion, species-specific growth scaling exponents and intercepts decreased, but became positively related to species' relative abundance, providing a growth advantage for individuals of abundant species with a higher growth scaling exponent and intercept compared with rare species, and thus reduced species diversity. By adopting allometric growth theory, we elucidate the size-dependent mechanisms through which pathogens regulate species diversity and provide a powerful framework to incorporate antagonistic size-dependent processes in understanding species coexistence.

Sleep patterns, genetic predisposition, and risk of chronic liver disease: A prospective study of 408,560 UK Biobank participants.

BACKGROUND: Little is known about the role that combined sleep behaviors play in the association with chronic liver disease (CLD) risk. METHODS: We included 408,560 participants initially free of CLD from the UK Biobank. A healthy sleep pattern was defined by early chronotype, sleep duration of 7-8 h/day, no insomnia, no snoring, and no excessive daytime sleepiness. Cox regression models were used to examine the association of healthy sleep pattern with incident CLD and their interaction with PNPLA3 genetic risk. RESULTS: During a median 12.5 years of follow-up, we documented 10,915 incident all-cause CLD cases, including 388 viral hepatitis, 4782 non-alcoholic fatty liver disease (NAFLD), 1356 cirrhosis, 973 alcoholic liver disease, and 725 liver cancer cases. Compared to participants with a healthy sleep score of 0-1, the hazard ratio (HR) (95 % confidence interval [CI]) for those with a sleep score of 5 was 0.54 (0.49, 0.60) for CLD, 0.52 (0.30, 0.90) for viral hepatitis, 0.47 (0.41, 0.55) for NAFLD, 0.57 (0.43, 0.75) for cirrhosis, 0.32 (0.23, 0.44) for alcoholic liver disease, and 0.53 (0.37, 0.77) for liver cancer. Healthy sleep pattern and PNPLA3 genetic risk exerted significant additive effects on CLD risk (relative excess risk due to the interaction: 0.05; attributable proportion due to the interaction: 13 %). LIMITATIONS: Measurement error was unavoidable for self-reported data on sleep behaviors. CONCLUSIONS: Our analyses provide evidence that healthy sleep pattern was inversely associated with the development of CLD, and participants with higher genetic risk were more likely to develop CLD when exposed to the unhealthy sleep pattern.

Frequency of Adding Salt to Foods, Genetic Susceptibility, and Incident Type 2 Diabetes: A Prospective Cohort Study.

CONTEXT: Excessive salt consumption is known to increase the risk of hypertension and cardiovascular disease, but the association between salt intake and incident type 2 diabetes has not been extensively researched. OBJECTIVE: In this study, we aimed to investigate the relationships between the frequency of adding salt to foods and incident type 2 diabetes, as well as any potential interactions with genetic predisposition. METHODS: We included 368 137 eligible participants, aged 37 to 73 years, from the UK Biobank. The frequency of adding salt to foods was assessed via a food frequency questionnaire. RESULTS: During a median follow-up of 12.6 years, we documented 10 981 incident type 2 diabetes cases. After adjustment for major confounders, participants who sometimes, usually, and always added salt to foods had 7% (hazard ratio [HR]: 1.07; 95% CI, 1.03-1.12), 9% (HR: 1.09; 95% CI, 1.03-1.16), 28% (HR: 1.28; 95% CI, 1.19-1.38) higher risks of developing type 2 diabetes, respectively, than those that never/rarely added salt to foods (P for trend < .001). We found these associations to be consistent across stratified and sensitivity analyses. However, we did not observe any statistically significant multiplicative or additive interactions between the frequency of adding salt to foods and genetic predisposition regarding incident type 2 diabetes. CONCLUSION: Our findings suggest that consuming salt regularly, regardless of genetic susceptibility, may increase the risk of type 2 diabetes. Therefore, public health interventions aimed at reducing excessive salt consumption may help prevent the onset of type 2 diabetes.

Polysocial and Polygenic Risk Scores and All-Cause Dementia, Alzheimer's Disease, and Vascular Dementia.

BACKGROUND: To establish a polysocial risk score (PsRS) incorporating various social factors for capturing the dementia risk and investigate the benefits of favorable social conditions across different genetic backgrounds. METHODS: This prospective cohort study comprised 345 439 participants initially free of dementia from the UK Biobank. A total of 10 social factors were summed to create a PsRS. A polygenic risk score (PRS) was constructed based on genome-wide significant variants. RESULTS: During a median follow-up of 12.5 years, we documented 4 595 incident all-cause dementia events including 2 067 Alzheimer's disease (AD) events and 1 028 vascular dementia (VD) events. Each additional PsRS was associated with a 19% increased risk of all-cause dementia (hazard ratio [HR], 1.19; 95% confidence interval [CI], 1.17 to 1.21), a 13% increased risk of AD (1.13; 1.10 to 1.16), and a 24% increased risk of VD (1.24; 1.19 to 1.29). 29% (24% to 33%) of dementia cases, 22% (14% to 29%) of AD cases, and 39% (28% to 48%) of VD cases were associated with a disadvantageous social environment. In addition, among participants at a high genetic risk, the low social risk was linked to a lower incidence rate of all-cause dementia, AD, and VD compared to those who had a high social risk, with reductions of 67.8%, 64.5%, and 84.2%, respectively. CONCLUSIONS: The PsRS could be effectively used in discriminating individuals at high risk of dementia. Around a quarter of dementia events could have a connection with a disadvantageous social environment, especially for those genetically susceptible to dementia.

Associations of healthy aging index and all-cause and cause-specific mortality: a prospective cohort study of UK Biobank participants.

The healthy aging index (HAI) has been recently developed as a surrogate measure of biological age. However, to what extent the HAI is associated with all-cause and cause-specific mortality and whether this association differs in younger and older adults remains unknown. We aimed to quantify the association between the HAI and mortality in a population of UK adults. In the prospective cohort study, data are obtained from the UK Biobank. Five HAI components (systolic blood pressure, reaction time, cystatin C, serum glucose, forced vital capacity) were scored 0 (healthiest), 1, and 2 (unhealthiest) according to sex-specific tertiles or clinically relevant cut-points and summed to construct the HAI (range 0-10). Cox proportional hazard regression models were used to estimate the associations of the HAI with the risk of all-cause and cause-specific mortality. 387,794 middle-aged and older participants were followed up for a median of 8.9 years (IQR 8.3-9.5). A total of 14,112 all-cause deaths were documented. After adjustments, each 1-point increase in the HAI was related to a higher risk of all-cause mortality (hazards ratio [HR], 1.17; 95%CI, 1.15-1.18). Such association was stronger among adults younger than 60 years (1.19, 1.17-1.21) than that among those 60 years and older (1.15, 1.14-1.17) (P interaction < 0.001). For each unit increment of the HAI, the multivariate-adjusted HRs for risk of death were 1.28 (1.25-1.31) for cardiovascular diseases, 1.09 (1.07-1.10) for cancer, 1.36 (1.29-1.44) for digestive disease, 1.42 (1.35-1.48) for respiratory disease, 1.42 (1.33-1.51) for infectious diseases, and 1.15 (1.09-1.21) for neurodegenerative disease, respectively. Our findings indicate that the HAI is positively associated with all-cause and cause-specific mortality independent of chronological age. Our results further underscore the importance of effective early-life interventions to slow aging and prevent premature death.

Identifying Potential Causal Effects of Telomere Length on Health Outcomes: A Phenome-Wide Investigation and Mendelian Randomization Study.

BACKGROUND: Telomere length has been linked to various health outcomes. To comprehensively investigate the causal effects of telomere length throughout the human disease spectrum, we conducted a phenome-wide Mendelian randomization study (MR-PheWAS) and a systematic review of MR studies. METHODS: We conducted a PheWAS to screen for associations between telomere length and 1 035 phenotypes in the UK Biobank (n = 408 354). The exposure of interest was the genetic risk score (GRS) of telomere length. Observed associations passing multiple testing corrections were assessed for causality by 2-sample MR analysis. A systematic review of MR studies on telomere length was performed to harmonize the published evidence and complement our findings. RESULTS: Of the 1 035 phenotypes tested, PheWAS identified 29 and 78 associations of telomere length GRS at a Bonferroni- and false discovery rate-corrected threshold; 24 and 66 distinct health outcomes were causal in the following principal MR analysis. The replication MR using data from the FinnGen study provided evidence of causal effects of genetically instrumented telomere length on 28 out of 66 outcomes, including decreased risks of 5 diseases in respiratory diseases, digestive diseases, and myocardial infarction, and increased risks of 23 diseases, mainly comprised neoplasms, diseases of the genitourinary system, and essential hypertension. A systematic review of 53 MR studies found evidence to support 16 out of the 66 outcomes. CONCLUSIONS: This large-scale MR-PheWAS identified a wide range of health outcomes that were possibly affected by telomere length, and suggested that susceptibility to telomere length may vary across disease categories.

Correlation between intraosseous thermal change and drilling impulse data during osteotomy within autonomous dental implant robotic system: An in vitro study.

OBJECTIVES: This study aims at examining the correlation of intraosseous temperature change with drilling impulse data during osteotomy and establishing real-time temperature prediction models. MATERIALS AND METHODS: A combination of in vitro bovine rib model and Autonomous Dental Implant Robotic System (ADIR) was set up, in which intraosseous temperature and drilling impulse data were measured using an infrared camera and a six-axis force/torque sensor respectively. A total of 800 drills with different parameters (e.g., drill diameter, drill wear, drilling speed, and thickness of cortical bone) were experimented, along with an independent test set of 200 drills. Pearson correlation analysis was done for linear relationship. Four machining learning (ML) algorithms (e.g., support vector regression [SVR], ridge regression [RR], extreme gradient boosting [XGboost], and artificial neural network [ANN]) were run for building prediction models. RESULTS: By incorporating different parameters, it was found that lower drilling speed, smaller drill diameter, more severe wear, and thicker cortical bone were associated with higher intraosseous temperature changes and longer time exposure and were accompanied with alterations in drilling impulse data. Pearson correlation analysis further identified highly linear correlation between drilling impulse data and thermal changes. Finally, four ML prediction models were established, among which XGboost model showed the best performance with the minimum error measurements in test set. CONCLUSION: The proof-of-concept study highlighted close correlation of drilling impulse data with intraosseous temperature change during osteotomy. The ML prediction models may inspire future improvement on prevention of thermal bone injury and intelligent design of robot-assisted implant surgery.

Observational and genetic associations of adiposity with cardiopulmonary multimorbidity: Linear and nonlinear Mendelian randomization analysis.

OBJECTIVE: Whether adiposity traits are causal risk factors for cardiopulmonary multimorbidity (CP-MM) remains largely unknown. The aim of this study was to examine the causal role of adiposity traits in the development of CP-MM. METHODS: This study involved 408,886 participants from the UK Biobank who had complete phenotypic and genetic data. Cox regression and Mendelian randomization (MR) analyses were conducted separately for observational and causal associations. RESULTS: During a median follow-up of 8.7 years, 1492 incident CP-MM were ascertained. In observational analysis, individuals with obesity had a hazard ratio (HR) of 1.51 (95% confidence intervals [CI]: 1.30-1.75) for developing CP-MM, compared with those with normal body mass index (BMI). Restricted cubic spline analyses showed a U-shaped relationship between continuous BMI and CP-MM (p < 0.001), whereas WHRadjBMI exhibited a linear relationship (p = 0.828). Joint analysis revealed that maintaining ideal waist-hip ratio (WHR) in adults with overweight is still effective in preventing CP-MM. In linear MR analysis, 1 kg/m2 increase in genetically predicted BMI and per 1% higher in genetically predicted WHRadjBMI was associated with 9% and 10% higher risk for incident CP-MM, respectively. Nonlinear MR analyses demonstrated linearity between genetically predicted BMI or WHRadjBMI and CP-MM. CONCLUSIONS: Adiposity may play a causal role in CP-MM development and represent a promising approach for multimorbidity prevention.

Harmonizing international quality standards for Andrographis paniculata: A comparative analysis of content determination methods across pharmacopeias.

The quality standards for Andrographis paniculata, a widely used medicinal herb, exhibited significant variations across different pharmacopeias. In this study, we compared the HPLC content determination methods and total lactone content of A. paniculata samples from different regions, as specified in the Chinese (CP), United States (USP), European (EP), Thai (TP), and Indian pharmacopeias (IP), as well as the Hong Kong Chinese Materia Medica Standards (HK). We aimed to assess the differences and similarities among these pharmacopeias and harmonized international quality standards for A. paniculata. The analysis revealed variations in sample preparation, liquid chromatographic conditions, fingerprint profiles, and total lactone content among the different pharmacopeias. Specifically, the CP and HK methods exhibited superior sample preparation and chromatographic separation. Further comparing the content of 20 A. paniculata samples with the CP, USP, EP and HK methods showed consistent determinations for the same components, indicating similar detection capabilities. The discrepancies in total lactone content primarily stemmed from differences in the number and types of detected compounds. Moreover, the acceptance criteria exhibited a stringency in the order CP > HK > EP > USP. In conclusion, this comparison analysis of content determination in CP, USP, HK, EP, TP and IP provided a scientific foundation for the international standardization and trade regulations of A. paniculata. It also served as a valuable reference for the development of international quality standards for other medicinal herbs, facilitating the harmonization of global pharmaceutical standards.

Associations of reproductive risk score and joint exposure to ambient air pollutants with chronic obstructive pulmonary disease: a cohort study in UK Biobank.

BACKGROUND: Reproductive risk factors and air pollution for developing chronic obstructive pulmonary disease (COPD) have been documented separately. However, the combined effects of overall reproductive risk status on COPD and the extent to which this can be impacted by air pollution are unknown. The aim of this study was to construct a reproductive risk score (RRS) and an air pollution score (APS) and assess independent and joint associations between the two with incident COPD risk. METHODS: 78,027 female participants aged 40-69 years without baseline COPD from UK Biobank recruited between 2006 to 2010 were included in this study. RRS was constructed by 17 women's reproductive health-related items, and APS incorporating PM2.5, PM2.5-10, PM10, NO2, and NOx was calculated to assess the joint exposure level. The outcome of the incident COPD was identified through the in-patient hospital register. The associations of RRS and APS with COPD were examined by Cox proportional hazards regression. RESULTS: The risk of COPD reached its highest in the fourth quartile of the RRS (adjusted HR: 2.23, 95% CI: 1.76-2.82, P for trend < 0.001). A dose-response manner can also be observed between higher tertile APS with increased COPD risk and the highest risk was found in the third tertile of the APS (adjusted HR: 1.37, 95% CI: 1.19-1.58, P for trend < 0.001). The relative excess risk due to interaction (RERI) of 0.030 (95% CI: 0.012-0.048) showed additive interaction between RRS and APS on COPD was significant. In the joint analysis, the combinations of both higher RRS and APS signified higher incident COPD risk. CONCLUSION: High RRS and high APS were jointly associated with increased COPD risks in a dose-response pattern. Using comprehensive indicators to identify women's reproductive risk factors, together with the control of air pollution, is effective for COPD prevention.