A Large-Range and High-Sensitivity Fiber-Optic Fabry-Perot Pressure Sensor Based on a Membrane-Hole-Base Structure.

In the field of in situ measurement of high-temperature pressure, fiber-optic Fabry-Perot pressure sensors have been extensively studied and applied in recent years thanks to their compact size and excellent anti-interference and anti-shock capabilities. However, such sensors have high technological difficulty, limited pressure measurement range, and low sensitivity. This paper proposes a fiber-optic Fabry-Perot pressure sensor based on a membrane-hole-base structure. The sensitive core was fabricated by laser cutting technology and direct bonding technology of three-layer sapphire and develops a supporting large-cavity-length demodulation algorithm for the sensor's Fabry-Perot cavity. The sensor exhibits enhanced sensitivity, a simplified structure, convenient preparation procedures, as well as improved pressure resistance and anti-harsh environment capabilities, and has large-range pressure sensing capability of 0-10 MPa in the temperature range of 20-370 °C. The sensor sensitivity is 918.9 nm/MPa, the temperature coefficient is 0.0695 nm/(MPa∙°C), and the error over the full temperature range is better than 2.312%.

Performance improvement of underwater LIBS qualitative and quantitative analysis by irradiating with long nanosecond pulses.

Long nanosecond pulses have been proven to be efficient at enhancing underwater LIBS emission. However, the quantitative analytical capability of underwater long-pulse LIBS has yet to be further revealed. In this work, we investigated the spectral characteristics by irradiating with a laser pulse of 120 ns duration. The alkali and alkaline earth metals Li, K and Ca and the transition element Mn were selected for analysis. It is shown that obvious self-reversal structures were observed in the spectra at high concentrations, making the calibration curves saturated. Correction was performed using the approximate Voigt function fitting method, which significantly improves the linearity of the calibration curves. In addition to the target metal elements, atomic lines of the matrix elements H and O in water were also observed, which can serve as promising internal standards for quantitative analysis. A comparison of the quantification performance with and without the internal standards demonstrates that the use of the internal standards is conducive to improving the robustness of the calibration approaches with higher determination coefficients. More importantly, the underwater LIBS signal stability is improved by more than 3 times, and the prediction error for validation samples is reduced by 2-4 times. The present results suggest that long ns pulses are favorable to significantly improving the qualitative and quantitative performance of underwater single-pulse LIBS, enabling long-pulse LIBS to have great potential to be applied to underwater in situ chemical analysis.

High Performance Rotating Triboelectric Nanogenerator with Coaxial Rolling Charge Pump Strategy.

With the development of society and the advancement of technology, the emergence of the Internet of Things (IoT) has changed people's lifestyles and raised the demand for energy to a new level. However, there are some drawbacks in terms of energy supply for IoT sensors, such as limited battery capacity and limitations in replacement and maintenance. Therefore, it has become urgent to develop a sustainable green energy source (wind energy) using the surrounding environment. Meanwhile, triboelectric nanogenerators (TENGs) with advantages such as flexible structure, low manufacturing cost, and environmental friendliness provide enormous potential for constructing self-powered sensing systems. In this work, we present a novel coaxial rolling charge pump TENG (CR-TENG) based on wind energy to enhance the output performance and durability. The rolling friction charge pump TENG directly injects positive and negative charges into the main TENG, which is more wear-resistant compared to sliding friction, and greatly increases the charge density and output power. In addition, the charge pumping part and the main TENG adopt the coaxial design, reducing the complexity of the structural design. On comparing the output performance of the CR-TENG under the initial state, rectifier bridge supplemental charge strategy, and charge pump supplemental charge strategy, results shown that the output voltage performance of the CR-TENG can be improved by 5800% under the charge pump supplemental charge strategy. Moreover, the output performance of the CR-TENG remains stable after 72,000 cycles. The output power of the CR-TENG can reach 1.21 mW with a load resistance of 3 × 107 Ω. And the CR-TENG can charge a 0.1 µF capacitor to 5 V in just 1.6 s. This work provides new insights for the rotary durable high output charge pump compensating a triboelectric nanogenerator and demonstrates the important potential of harvesting environmental energy to supply intelligent IoT nodes.

Alternative Approach to Design and Optimization of High-Q Ring Resonators for Membrane-Free Acoustic Sensors.

Membrane-free acoustic sensors based on new principle and structure are becoming a research hotspot, because of many advantages, e.g., their wide bandwidth and high sensitivity. It is proposed that a membrane-free acoustic sensor employs a semi-buried optical waveguide ring resonator (SOWRR) as a sensing element. Using air as the upper cladding medium, the excited evanescent field in the air cladding medium would be modulated by acoustic wave. On this basis, the acoustic sensing model is established. Taking high Q factor and resonance depth as design criteria, the optimal design parameters are given. The optimal values of the air/SiO2: Ge/SiO2 waveguide resonator length and coupling spacing are obtained as 50 mm and 5.6 µm, respectively. The Q factor of the waveguide resonator of this size is as high as 8.33 × 106. The theoretical simulation indicates that the frequency response ranges from 1 Hz to 1.58 MHz and that the minimum detectable sound pressure is 7.48 µPa using a laser with linewidth of 1 kHz. Because of its advantages of wide bandwidth and high sensitivity, the membrane-free sensor is expected to become one of the most promising candidates for the next-generation acoustic sensor.

Enhanced wide-range gas pressure sensing with an all-solid open Fabry-Pérot interferometer.

The sensors with a wide gas pressure detection range are urgently demanded in many industrial applications. Here, we propose a gas pressure sensor based on an all-solid open Fabry-Pérot interferometer, which is prepared by using optical contact bonding to ensure high structural strength and high-quality factor of 8.8 × 105. The applied pressure induces a change in the refractive index of the air, leading to the shift of the resonant spectrum. The pressure is detected by calibrating this shift. The sensor exhibits a pressure sensitivity of 4.20 ± 0.01 nm/MPa in a pressure range of 0 to 10 MPa and has a minimum pressure resolution of 0.005 MPa. Additionally, it shows a lower temperature cross-sensitivity of -0.25 kPa/°C. These findings affirm that the sensor achieves high-sensitivity pressure sensing across a wide detection range. Moreover, owing to its exceptional mechanical strength, it holds great promise for applications in harsh environments, such as high temperature and high pressure.

Non-alcoholic fatty liver disease combined with rheumatoid arthritis exacerbates liver fibrosis by stimulating co-localization of PTRF and TLR4 in rats.

Rheumatoid arthritis (RA) has a high prevalence in patients with non-alcoholic fatty liver disease (NAFLD); however, the underlying mechanism is unclear. To address this, our study established a rat model with both NAFLD and RA by feeding a high-fat diet (HFD) and administering intradermal injection of Freund's complete adjuvant (FCA) with bovine type II collagen. Collagen-induced RA (CIA) was confirmed by hind paw swelling and histological examination. The histomorphological characteristics of NAFLD were evaluated by Masson's trichrome and hematoxylin-eosin staining. The development of NAFLD was further evaluated by measuring serum concentrations of triglyceride (TG), total cholesterol (T-CHO), alanine aminotransferase (ALT), aspartate aminotransferase (AST), and lipopolysaccharide (LPS). The results showed that HFD feeding exacerbated secondary inflammation in CIA rats, whereas FCA/bovine type II collagen injection increased serum levels of ALT, AST, TG, T-CHO, and LPS and exacerbated hepatic fibrosis in both normal and NAFLD rats. Interestingly, NAFLD + CIA significantly promoted the expression of PTRF, a caveolae structure protein involved in hepatic lipid metabolism and affecting downstream signaling of Toll-like receptor 4 (TLR4) and PI3K/Akt activation. High resolution confocal microscopy revealed increased PTRF and TLR4 co-localization in hepatic small vessels of NAFLD + CIA rats. AAV9-mediated PTRF knockdown inhibited TLR4 signaling and alleviated hepatic fibrosis in NAFLD + CIA rats. Together, these findings indicate that NAFLD combined with CIA causes synovial injury and enhances non-alcoholic fatty liver fibrosis in rats. PTRF could attenuate the symptoms of NAFLD + CIA likely by affecting TLR4/PTRF co-expression and downstream signaling.

Astragalus polysaccharide alleviates alcoholic-induced hepatic fibrosis by inhibiting polymerase I and transcript release factor and the TLR4/JNK/NF-κB/MyD88 pathway.

ETHNOPHARMACOLOGICAL RELEVANCE: Astragali Radix (AR), the root of Astragalus membranaceus (Fisch.) Bge. or Astragalus membranaceus (Fisch.) Bge. var. mongholicus (Bge.) Hsiao, known as Huangqi in traditional Chinese medicine, has been widely used in traditional Chinese medicine prescriptions for acute and chronic liver injury. AR was the most important medicine in a Chinese traditional prescription called Huangqi Decoction (HQD), has been used to treat chronic liver diseases since the 11th century. In particular, its major active ingredient, Astragalus polysaccharide (APS), has demonstrated promising effects on inhibiting hepatic fibrosis. However, to date, the effect of APS against alcohol-induced hepatic fibrosis and its underlying molecular mechanisms remains unknown. AIMS OF THE STUDY: This study aimed to explore the effect and potential molecular mechanisms of APS against alcohol-induced hepatic fibrosis by using network pharmacology and experimental validation. MATERIALS AND METHODS: The potential targets and underling mechanism of AR in alcoholic liver fibrosis were first predicted using network pharmacology, followed by experimental validation using SD rat model with alcohol-induced hepatic fibrosis. Further, the predicted candidate signaling pathways and potential target polymerase I and transcript release factor (PTRF) were combined to explore the multifaceted mechanism of APS against alcohol-induced hepatic fibrosis. Finally, overexpression of PTRF was explored to reveal the role of PTRF in the mechanism of APS against alcohol-induced hepatic fibrosis. RESULT: APS exerted potent anti-hepatic fibrosis effects by downregulating genes involved in the Toll-like receptor 4 (TLR4)/JNK/NF-κB/MyD88 pathway. Notably, APS treatment ameliorated the hepatic damage by inhibiting the overexpression of PTRF and decreasing the co-localisation of TLR4/PTRF. Overexpression of PTRF induced reversal of the protective effects of APS on alcohol-induced hepatic fibrosis. CONCLUSION: This study indicated that APS may alleviate alcohol-induced hepatic fibrosis by inhibiting the activation of PTRF and TLR4/JNK/NF-κB/MyD88 pathway, which provides a scientific elucidation for the mechanisms of APS on the anti-hepatic fibrosis activity and presents a promising therapeutic approach for treating hepatic fibrosis.

Acoustic Sensing Performance Investigation Based on Grooves Etched in the Ring Resonators.

Acoustic detection based on optical technology has moved in the direction of high sensitivity and resolution. In this study, an optical waveguide acoustic sensor based on a ring resonator with the evanescent field is proposed. Grooves are introduced into the ring resonators as a direct sensitive structure to excite the evanescent field. A series of resonators with diverse grooves are fabricated for a comparative analysis of acoustic performance. The acoustic parameters of bandwidth, sensitivity, and signal-to-noise ratio (SNR) vary with different grooves indicated by the Q-factor. The results show that the ring resonators with variable-sized grooves exhibit excellent capability of acoustics detection. A maximum frequency of 160 kHz and a high sensitivity of 60.075 mV/Pa is achieved, with the minimum detectable sound pressure being 131.34 µPa/Hz1/2. Furthermore, the resonators with high Q-factors represent a remarkable sound resolution reaching 0.2 Hz. This work is of great significance for optimizing acoustic sensors and broadening the application range.

Triboelectric-Electromagnetic Hybrid Wind-Energy Harvester with a Low Startup Wind Speed in Urban Self-Powered Sensing.

Wind energy as a renewable energy source is easily available and widely distributed in cities. However, current wind-energy harvesters are inadequate at capturing energy from low-speed winds in urban areas, thereby limiting their application in distributed self-powered sensor networks. A triboelectric-electromagnetic hybrid harvester with a low startup wind speed (LSWS-TEH) is proposed that also provides output power within a wide range of wind speeds. An engineering-implementable propeller design method is developed to reduce the startup wind speed of the harvester. A mechanical analysis of the aerodynamics of the rotating propeller is performed, and optimal propeller parameter settings are found that greatly improved its aerodynamic torque. By combining the high-voltage output of the triboelectric nanogenerator under low-speed winds with the high-power output of the electromagnetic generator under high-speed winds, the harvester can maintain direct current output over a wide wind-speed range after rectification. Experiments show that the harvester activates at wind speeds as low as 1.2 m/s, powers a sensor with multiple integrated components in 1.7 m/s wind speeds, and drives a Bluetooth temperature and humidity sensor in 2.7 m/s wind speeds. The proposed small, effective, inexpensive hybrid energy harvester provides a promising way for self-powered requirements in smart city settings.

Optimized Design of an Ultrasonic-Based High-Efficiency Wireless Passive Monitoring System for Sealed Metal Compartments.

The condition monitoring (CM) of sealed metal compartments (SMCs) is an urgently required restructure. Ultrasound penetrates SMCs to power and communicate with built-in sensors, enabling the CM of SMCs. However, current ultrasonic wireless power transfer and data communication (UWPTADC) systems are large and complex, and limited by the efficiency of energy transfer and data reliability. In this paper, an optimized design of a high-efficiency wireless passive monitoring system using UWPTADC techniques is proposed for SMC. The circuit model of the system is developed and analyzed to achieve an optimal design for efficient wireless power transfer and effective data communication coupling. A test system was constructed using a steel wall of 11 mm thickness as a validation object. At the ultrasonic carrier frequency of 1.045 MHz, the system has an energy transfer efficiency of 60%, and a communication rate of 50 kbps. In addition, the system realizes temperature and humidity monitoring inside a 13 mm thick cylindrical SMC, simulating the process of ultrasonic CM of an actual engine compartment. The system provides a wiring-free and battery-free solution for CM in SMCs, advancing CM in aerospace, marine and other fields.

Research on high-temperature characteristics of a miniature Fabry-Pérot cavity acoustic sensor.

The applications of fiber-optic acoustic sensors are expanded to the high-temperature field, but it still faces challenges to realize the wide-band and high-sensitivity acoustic signal detection in high-temperature environments. Here, we propose a miniature membrane-free fiber-optic acoustic sensor based on a rigid Fabry-Pérot (F-P) cavity and construct an acoustic signal detection system. The system can achieve high-sensitivity acoustic detection while maintaining a wide frequency band in temperatures ranging from 20 °C to 200 °C. The prepared F-P cavity based on optical contact technology is the sensitive unit of the sensor, and has a high-quality factor of 8.8×105. Specifically, with the increasing of temperature, the sensitivity gradually increases, and the frequency response range does not change. A maximum sensitivity of 491.2 mV/Pa and a high signal-to-noise ratio of 60.9 dB are achieved at 200 °C. The sensor has an excellent acoustic signal response in the frequency range of 10 Hz-50 kHz with a flatness of ±2 dB. This study is important for the application of the fiber-optic acoustic sensor in high-temperature environments.

Paeoniflorin Ameliorates Colonic Fibrosis in Rats with Postinfectious Irritable Bowel Syndrome by Inhibiting the Leptin/LepRb Pathway.

Postinfectious irritable bowel syndrome (PI-IBS) is a highly prevalent gastrointestinal disorder associated with immune dysregulation and depression- and anxiety-like behaviors. Through traditional medicine, the active ingredient of Paeoniae Radix called paeoniflorin (PF) was previously found to prevent the symptoms of PI-IBS. However, there is limited information on the effects of PF on intestinal function and depression- and anxiety-like symptoms in PI-IBS animal models. Here, we aimed to determine the effects of PF treatment on the symptoms of PI-IBS in a rat model. The PI-IBS rat model was established via early postnatal sibling deprivation (EPSD), trinitrobenzenesulfonic acid (TNBS), and chronic unpredictable mild stress (CUMS) stimulation and then treated with different dosages of PF (10, 20, and 40 mg/kg) and leptin (1 and 10 mg/kg). The fecal water content and body weight were measured to evaluate the intestinal function, while the two-bottle test for sucrose intake, open field test (OFT), and elevated plus maze test (EMT) were performed to assess behavioral changes. The serum leptin levels were also measured using an enzyme-linked immunosorbent assay. Furthermore, the expressions of leptin and its receptor, LepRb, were detected in colonic mucosal tissues through an immunohistochemical assay. The activation of the PI3K/AKT signaling pathway and the expression of brain-derived neurotrophic factor (BDNF) were also detected via western blotting. After the experimental period, the PI-IBS rats presented decreased body weight and increased fecal water content, which coincided with elevated leptin levels and heightened depression- and anxiety-like behaviors (e.g., low sucrose intake, less frequency in the center areas during OFT, and fewer activities in the open arms during EMT). However, the PF treatment ameliorated these observed symptoms. Furthermore, PF not only inhibited leptin/LepRb expression but also reduced the PI3K/AKT phosphorylation and BDNF expression in PI-IBS rats. Notably, cotreatment with leptin (10 mg/kg) reduced the effects of PF (20 mg/kg) on colonic fibrosis, leptin/LepRb expression, and PI3K/AKT activation. Therefore, our findings suggest that leptin is targeted by PF via the leptin/LepRb pathway, consequently ameliorating the symptoms of PI-IBS. Our study also contributes novel insights for elucidating the pharmacological action of PF on gastrointestinal disorders and may be used for the clinical treatment of PI-IBS in the future.

Development of novel nitric oxide-releasing quinolinedione/furoxan hybrids as NQO1 inhibitors for intervention of drug-resistanthepatocellular cancer.

A series of novel nitric oxide (NO)-releasing 5,8-quinolinedione/furoxan hybrids (8a-h and 9a-h) were designed and synthesized through coupling different alkanolamine substituted phenylsulfonyl furoxan with 5,8-quinolinedione. Most compounds displayed high cytotoxic activity against drug-sensitive/-resistant cancer cells. In particular, the IC50 of 9a (0.42 µM) was about 9-fold lower than that of ß-lap (3.69 µM) and 12-fold lower than that of SAHA (5.24 µM) in drug-resistant cancer cells. Also, 9a was demonstrated to selectively inhibit the growth of Bel7402/5-FU cancer cells. Mechanistic studies demonstrated that 9a could serve as an NO donor and nicotinamide quinone oxidoreductase 1 (NQO1) inhibitor (IC50 = 0.8 µM), which could induce the highest level of NO and reactive oxygen species (ROS) in Bel-7402/5-FU cancer cells. Furthermore, 9a could promote tumor cell apoptosis and autophagy via regulation of apoptosis-related protein (Bax, Bcl-2, and Caspase 3) and autophagy-associated proteins (LC3 and p62) in Bel-7402/5-FU cells. Taken together, 9a may be considered as a promising candidate for a further comprehensive study involving drug-resistant hepatocellular carcinoma.

Compact fiber-optic Fabry-Perot cavity based on sandwich structure adopting direct bonding of quartz glass.

A compact fiber-optic Fabry-Perot (F-P) cavity for a sensor is designed based on a sandwich structure, adopting direct bonding of quartz glass. The reflective F-P cavity is manufactured by a fiber optic with a quartz glass ferrule and the sandwich structure with an air cavity, which is achieved by direct bonding of quartz glass. This fabrication process includes plasma surface activation, hydrophilic pre-bonding, high-temperature annealing, and dicing. The cross section of the bonding interface tested by a scanning electron microscope indicates that the sandwich structure is well bonded, and the air cavity is not deformed. Experiments show that the quality factor of the F-P cavity is 2711. Tensile strength testing shows that the bond strength exceeds 35 MPa. The advantage of direct bonding of quartz glass is that high consistency and mass production of the cavity can be realized. Moreover, the cavity is free of problems caused by the mismatch of thermal expansion coefficients between different materials. Therefore, the F-P cavity can be made into a sensor, which is promising in detecting air pressure, acoustic and high temperature.

An Optimal Design Method for Improving the Efficiency of Ultrasonic Wireless Power Transmission during Communication.

Due to the excellent directivity, strong penetrability, and no electromagnetic shielding effect, ultrasonic waves have good potential for wireless energy transmission and information transfer inside and outside of sealed metal devices. However, traditional ultrasonic based energy transmission methods usually result in considerable energy consumption because of the impedance mismatch during the impedance modulation of the communication. This paper presents an optimal design method for efficient energy transfer during ultrasonic communication. The channel equivalent circuit model is established by only using the acoustic-electric channel scattering parameters. According to the equivalent circuit model, the channel impedance matches with a weak mismatch state is performed during the communication. In this way, the impedance modulation effect is ensured with a lower decrease in the energy transmission efficiency. Finally, the simultaneous energy transmission and impedance modulation are carried out through the 11 mm thick 304 stainless steel plate. The transmission power is 37.86 W with a transmission efficiency of 45.75%, and the modulation rate is 10 Kbps. Compared with the traditional methods, our proposed energy transmission efficiency is increased by 17.62%. The results verify the proposed method's effectiveness and the high accuracy of the model. The proposed method has great engineering applications and broad prospects in condition monitoring of metallic environments.

Acoustic Performance Study of Fiber-Optic Acoustic Sensors Based on Fabry-Pérot Etalons with Different Q Factors.

The ideal development direction of the fiber-optic acoustic sensor (FOAS) is toward broadband, a high sensitivity and a large dynamic range. In order to further promote the acoustic detection potential of the Fabry-Pérot etalon (FPE)-based FOAS, it is of great significance to study the acoustic performance of the FOAS with the quality (Q) factor of FPE as the research objective. This is because the Q factor represents the storage capability and loss characteristic of the FPE. The three FOASs with different Q factors all achieve a broadband response from 20 Hz to 70 kHz with a flatness of ±2 dB, which is consistent with the theory that the frequency response of the FOAS is not affected by the Q factor. Moreover, the sensitivity of the FOAS is proportional to the Q factor. When the Q factor is 1.04×106, the sensitivity of the FOAS is as high as 526.8 mV/Pa. Meanwhile, the minimum detectable sound pressure of 347.33 µPa/Hz1/2  is achieved. Furthermore, with a Q factor of 0.27×106, the maximum detectable sound pressure and dynamic range are 152.32 dB and 107.2 dB, respectively, which is greatly improved compared with two other FOASs. Separately, the FOASs with different Q factors exhibit an excellent acoustic performance in weak sound detection and high sound pressure detection. Therefore, different acoustic detection requirements can be met by selecting the appropriate Q factor, which further broadens the application range and detection potential of FOASs.

An Optical Acoustic Detection System Based on Fabry Pérot Etalon Stability Structure.

The optical acoustic detection system based on the Fabry Pérot Etalon (FPE) with high quality-factor (High Q) and stability structure is described and tested. The FPE contains two high-reflectivity Plano-Concave lenses, achieving high fineness and stability. The protective structure of the confocal stabilized FPE is composed of an invar tube, copper sheath, Bakelite sheath and aluminum housing to protect the sensor from the effects of ambient temperature and vibration. The audio signal is injected into the cavity through the sound hole located in the center of the cavity. Acoustic waves induce the vibration of the medium in the cavity, which leads to a simultaneous change in the FPE optical path and a shift of the interference spectrum. The acoustic detection system is built, and the frequency of the laser is locked on the resonant frequency points of the FPE by using phase modulation technology, so as to detect acoustic signals of different frequencies and amplitudes. In addition, the sensitivity of the proposed sensor exceeds 34.49 mV/Pa in the range of 20 Hz-20 kHz. A Signal-to-Noise Ratio (SNR) of 37 dB can be achieved at 20 Hz. Acoustic signal detection technology based on the FPE stability model is used to test the theoretical feasibility of the future high sensitivity Fabry Pérot Interferometric (FPI) acoustic sensors.

Suppression of PTRF Alleviates Post-Infectious Irritable Bowel Syndrome via Downregulation of the TLR4 Pathway in Rats.

Background: Accumulating evidence suggests that the polymerase I and transcript release factor (PTRF), a key component of the caveolae structure on the plasma membrane, plays a pivotal role in suppressing the progression of colorectal cancers. However, the role of PTRF in the development of functional gastrointestinal (GI) disorders remains unclear. Post-infectious irritable bowel syndrome (PI-IBS) is a common functional GI disorder that occurs after an acute GI infection. Here, we focused on the role of PTRF in the occurrence of PI-IBS and investigated the underlying mechanisms. Methods: Lipopolysaccharide (LPS) (5 µg/ml) was used to induce inflammatory injury in human primary colonic epithelial cells (HCoEpiCs). Furthermore, a rat model of PI-IBS was used to study the role of PTRF. Intestinal sensitivity was assessed based on the fecal water content. A two-bottle sucrose intake test was used to evaluate behavioral changes. Furthermore, shRNA-mediated knockdown of PTRF was performed both in vitro and in vivo. We detected the expression of PTRF in colonic mucosal tissues through immunohistochemistry (IHC), western blotting (WB), and immunofluorescence (IF) analysis. Luciferase activity was quantified using a luciferase assay. Co-localization of PTRF and Toll-like receptor 4 (TLR4) was detected using IF analysis. The activation of the signaling pathways downstream of TLR4, including the iNOs, p38, extracellular signal-regulated kinase (ERK), and c-Jun N-terminal kinase (JNK) pathways, was detected via WB. The levels of NO, IL-1ß, IL-6, and TNF-α were measured using enzyme-linked immunosorbent assays. Results: LPS significantly induced PTRF expression and signaling downstream of TLR4, including p38, ERK, and JNK pathways, in HCoEpiCs. Moreover, shRNA-mediated knockdown of PTRF in HCoEpiCs significantly decreased the phosphorylation of JNK, ERK, and p38 and iNOS expression. In PI-IBS rats, the lack of PTRF not only reduced fecal water content and suppressed depressive behavior but also increased the body weight. Furthermore, we found a strong co-localization pattern for PTRF and TLR4. Consistently, the lack of PTRF impaired TLR4 signaling, as shown by the decreased levels of p-JNK, p-ERK, and p-p38, which are upstream factors involved in iNOS expression. Conclusion: PTRF promoted PI-IBS and stimulated TLR4 signaling both in vitro and in vivo. The results of this study not only enlighten the pathogenesis of PI-IBS but also help us understand the biological activity of PTRF and provide an important basis for the clinical treatment of PI-IBS by targeting PTRF.

Micro-fiber-optic acoustic sensor based on high-Q resonance effect using Fabry-Pérot etalon.

A micro-fiber-optic acoustic sensor based on the high-quality-factor (high-Q) resonance effect that uses a Fabry-Pérot etalon (FPE) is presented in this study. The device has been demonstrated experimentally to be a high-sensitivity acoustic sensor with a large dynamic range over a wide frequency band. Optical contact technology was used to improve the robustness of the FPE, which consists of two parallel lenses with high reflectivity exceeding 99%. An acoustic signal detection system based on phase modulation spectrum technology was also constructed. A stable and high-Q value of 106 was measured for the FPE. As a result, high sensitivity of 177.6 mV/Pa was achieved. Because of the change in the refractive index of the air when it is modulated by the acoustic waves, a frequency response of 20 Hz-70 kHz with flatness of ±2 dB was obtained and a large dynamic range of 115.3 dB was measured simultaneously. The excellent performance of the device will be beneficial for optical acoustic sensing.

Effects of Jian Pi Qu Shi Formula on intestinal bacterial flora in patients with idiopathic membranous nephropathy: A prospective randomized controlled trial.

BACKGROUND: The incidence of idiopathic membranous nephropathy (IMN) has recently increased remarkably. Immune dysfunction caused by disordered intestinal flora might be an important factor affecting IMN. The Jian Pi Qu Shi Formula (JPQSF) shows promise in treating IMN. Here, we sequenced 16S rRNA genes to compare intestinal flora between patients with IMN and healthy persons. We also conducted a randomized controlled clinical trial to further compare the intestinal flora of patients with IMN treated with traditional Chinese medicine (TCM) and western medicine (WM). METHODS: Among 40 patients with IMN treated at Department of Nephrology in Xiyuan Hospital, Chinese Academy of Traditional Chinese Medicine between July 2016 and December 2018, we compared 30 of them with 10 healthy persons (controls). The IMN group was randomly assigned to receive JPQSF (TCM) or immunosuppressant WM therapy in (n = 15 per group) for 6 months. Intestinal microbiota diversity was analyzed using alpha diversity and beta diversity. Intestinal flora that significantly differed between the groups was analyzed using MetaStat. The effects and safety of the therapies were determined based on the values for plasma albumin, 24-h urine protein excretion, serum creatinine, urea nitrogen, estimate glomerular filtration rate (eGFR), complete blood count, and liver enzymes. All data were statistically analyzed using Statistical Package for the Social Sciences (SPSS) 20.0 statistical software. RESULTS: Baseline characteristics did not significantly differ between the IMN and healthy groups, or the TCM and WM groups. After six months of treatment, 24-h urinary protein significantly declined in the TCM and WM groups (before and after treatment: 3.24 ± 1.74 vs. 1.73 ± 1.85 g, P < 0.05 and 3.94 ± 1.05 vs. 1.91 ± 1.18 g, P < 0.05, respectively). Plasma albumin was significantly increased in the TCM group (before vs. after treatment: 32.44 ± 9.04 vs. 39.99 ± 7.03 g/L, P < 0.05), but did not significantly change in the WM group (31.55 ± 4.23 vs. 34.83 ± 9.14 g/L, P > 0.05). Values for urea nitrogen, serum creatinine, and eGFR did not significantly change in either group. The alpha diversity index for intestinal flora differed between the IMN and healthy groups, and the TCM and WM groups. Comparisons of multiple samples (beta diversity) revealed differences in intestinal flora between the IMN and healthy groups, and the TCM and WM groups. The Metastat analysis findings showed that the main genera that differed between the IMN group before treatment and the healthy group were Christensenellaceae_R-7_group, Bifidobacterium (77), Dorea, Escherichia-Shigella, Parabacteroides, Bifidobacterium, and Coprococcus_3. After TCM therapy, the main differential genera were Butyricimonas, Bacteroides, Alistipes, and Lachnospira, and after WM therapy, these were Ruminococcus_2, Lachnospiraceae_ND3007_group, Lachnospira, Bifidobacterium, Alistipes, and [Eubacterium]_ventriosum_group. CONCLUSION: Patients with IMN might have disordered intestinal flora, and JPQSF can regulate intestinal flora in patients with IMN.