RESUMEN
Objective: The aim of this study was to investigate the knowledge, attitude, and practice (KAP) of medical workers in the radiology department toward the prevention and diagnosis of COVID-19. Methods: This multicenter cross-sectional study was conducted among medical workers in the radiology department of 17 hospitals between March and June 2022. Results: A total of 324 medical workers were enrolled. The mean knowledge scores were 15.3 ± 3.4 (out of 23), attitude scores were 31.1 ± 5.6 (range 8-40), and practice scores were 35.1 ± 4.4 (range 8-40). Positive attitudes (OR = 1.235, 95% CI: 1.162-1.311, P < 0.001) and aged 41-50 years were independently associated with higher practice scores. Those with the better practice were more likely to be older (OR = 2.603, 95% CI: 1.242-5.452, P = 0.011), nurses (OR = 2.274, 95% CI: 1.210-4.272, P = 0.011) and with junior/intermediary/vice-senior title (OR = 2.326, 95% CI: 1.030-5.255, P = 0.042; OR = 2.847, 95% CI: 1.226-6.606, P = 0.015; OR = 4.547, 95% CI: 1.806-11.452, P = 0.001, respectively). Subgroup analysis revealed significant differences in knowledge between technicians and physicians and nurses and between staff working in tertiary hospitals and non-tertiary hospitals. Knowledge is positively correlated with attitude (ß = 0.54, P < 0.001), and attitude is positively correlated with practice (ß = 0.37, P < 0.001). Attitudes significantly mediated the association between knowledge and practice (ß = 0.119, P < 0.001). Conclusion: The radiology medical workers showed moderate knowledge but good attitudes and practices of prevention and diagnosis of COVID-19. Attitudes were found to be positively associated with better practices of prevention and diagnosis of COVID-19. Attitudes significantly mediated the association between knowledge and practice.
Asunto(s)
COVID-19 , Humanos , COVID-19/diagnóstico , COVID-19/prevención & control , Estudios Transversales , Conocimientos, Actitudes y Práctica en Salud , Encuestas y Cuestionarios , China , Prueba de COVID-19RESUMEN
Person search aims at localizing and recognizing query persons from raw video frames, which is a combination of two sub-tasks, i.e., pedestrian detection and person re-identification. The dominant fashion is termed as the one-step person search that jointly optimizes detection and identification in a unified network, exhibiting higher efficiency. However, there remain major challenges: (i) conflicting objectives of multiple sub-tasks under the shared feature space, (ii) inconsistent memory bank caused by the limited batch size, (iii) underutilized unlabeled identities during the identification learning. To address these issues, we develop an enhanced decoupled and memory-reinforced network (DMRNet++). First, we simplify the standard tightly coupled pipelines and establish a task-decoupled framework (TDF). Second, we build a memory-reinforced mechanism (MRM), with a slow-moving average of the network to better encode the consistency of the memorized features. Third, considering the potential of unlabeled samples, we model the recognition process as semi-supervised learning. An unlabeled-aided contrastive loss (UCL) is developed to boost the identification feature learning by exploiting the aggregation of unlabeled identities. Experimentally, the proposed DMRNet++ obtains the mAP of 94.5% and 52.1% on CUHK-SYSU and PRW datasets, which exceeds most existing methods.
RESUMEN
People live in a 3D world. However, existing works on person re-identification (re-id) mostly consider the semantic representation learning in a 2D space, intrinsically limiting the understanding of people. In this work, we address this limitation by exploring the prior knowledge of the 3D body structure. Specifically, we project 2D images to a 3D space and introduce a novel parameter-efficient omni-scale graph network (OG-Net) to learn the pedestrian representation directly from 3D point clouds. OG-Net effectively exploits the local information provided by sparse 3D points and takes advantage of the structure and appearance information in a coherent manner. With the help of 3D geometry information, we can learn a new type of deep re-id feature free from noisy variants, such as scale and viewpoint. To our knowledge, we are among the first attempts to conduct person re-id in the 3D space. We demonstrate through extensive experiments that the proposed method: (1) eases the matching difficulty in the traditional 2D space; 2) exploits the complementary information of 2D appearance and 3D structure; 3) achieves competitive results with limited parameters on four large-scale person re-id datasets; and 4) has good scalability to unseen datasets. Our code, models, and generated 3D human data are publicly available at https://github.com/layumi/person-reid-3d.
RESUMEN
Domain adaptation is to transfer the shared knowledge learned from the source domain to a new environment, i.e., target domain. One common practice is to train the model on both labeled source-domain data and unlabeled target-domain data. Yet the learned models are usually biased due to the strong supervision of the source domain. Most researchers adopt the early-stopping strategy to prevent over-fitting, but when to stop training remains a challenging problem since the lack of the target-domain validation set. In this paper, we propose one efficient bootstrapping method, called Adaboost Student, explicitly learning complementary models during training and liberating users from empirical early stopping. Adaboost Student combines deep model learning with the conventional training strategy, i.e., adaptive boosting, and enables interactions between learned models and the data sampler. We adopt one adaptive data sampler to progressively facilitate learning on hard samples and aggregate "weak" models to prevent over-fitting. Extensive experiments show that (1) Without the need to worry about the stopping time, AdaBoost Student provides one robust solution by efficient complementary model learning during training. (2) AdaBoost Student is orthogonal to most domain adaptation methods, which can be combined with existing approaches to further improve the state-of-the-art performance. We have achieved competitive results on three widely-used scene segmentation domain adaptation benchmarks.
RESUMEN
In this paper, we study the cross-view geo-localization problem to match images from different viewpoints. The key motivation underpinning this task is to learn a discriminative viewpoint-invariant visual representation. Inspired by the human visual system for mining local patterns, we propose a new framework called RK-Net to jointly learn the discriminative Representation and detect salient Keypoints with a single Network. Specifically, we introduce a Unit Subtraction Attention Module (USAM) that can automatically discover representative keypoints from feature maps and draw attention to the salient regions. USAM contains very few learning parameters but yields significant performance improvement and can be easily plugged into different networks. We demonstrate through extensive experiments that (1) by incorporating USAM, RK-Net facilitates end-to-end joint learning without the prerequisite of extra annotations. Representation learning and keypoint detection are two highly-related tasks. Representation learning aids keypoint detection. Keypoint detection, in turn, enriches the model capability against large appearance changes caused by viewpoint variants. (2) USAM is easy to implement and can be integrated with existing methods, further improving the state-of-the-art performance. We achieve competitive geo-localization accuracy on three challenging datasets, i. e., University-1652, CVUSA and CVACT. Our code is available at https://github.com/AggMan96/RK-Net.
RESUMEN
Deep learning has shown significant successes in person reidentification (re-id) tasks. However, most existing works focus on discriminative feature learning and impose complex neural networks, suffering from low inference efficiency. In fact, feature extraction time is also crucial for real-world applications and lightweight models are needed. Prevailing pruning methods usually pay attention to compact classification models. However, these methods are suboptimal for compacting re-id models, which usually produce continuous features and are sensitive to network pruning. The key point of pruning re-id models is how to retain the original filter distribution in continuous features as much as possible. In this work, we propose a blockwise adjacent filter decaying method to fill this gap. Specifically, given a trained model, we first evaluate the redundancy of filters based on the adjacency relationships to preserve the original filter distribution. Second, previous layerwise pruning methods ignore that discriminative information is enhanced block-by-block. Therefore, we propose a blockwise filter pruning strategy to better utilize the block relations in the pretrained model. Third, we propose a novel filter decaying policy to progressively reduce the scale of redundant filters. Different from conventional soft filter pruning that directly sets the filter values as zeros, the proposed filter decaying can keep the pretrained knowledge as much as possible. We evaluate our method on three popular person reidentification datasets, that is: 1) Market-1501; 2) DukeMTMC-reID; and 3) MSMT17_V1. The proposed method shows superior performance to the existing state-of-the-art pruning methods. After pruning over 91.9% parameters on DukeMTMC-reID, the Rank-1 accuracy only drops 3.7%, demonstrating its effectiveness for compacting person reidentification.
Asunto(s)
Redes Neurales de la Computación , HumanosRESUMEN
Eyeglasses removal is challenging in removing different kinds of eyeglasses, e.g., rimless glasses, full-rim glasses, and sunglasses, and recovering appropriate eyes. Due to the significant visual variants, the conventional methods lack scalability. Most existing works focus on the frontal face images in the controlled environment, such as the laboratory, and need to design specific systems for different eyeglass types. To address the limitation, we propose a unified eyeglass removal model called the eyeglasses removal generative adversarial network (ERGAN), which could handle different types of glasses in the wild. The proposed method does not depend on the dense annotation of eyeglasses location but benefits from the large-scale face images with weak annotations. Specifically, we study the two relevant tasks simultaneously, that is, removing eyeglasses and wearing eyeglasses. Given two face images with and without eyeglasses, the proposed model learns to swap the eye area in two faces. The generation mechanism focuses on the eye area and invades the difficulty of generating a new face. In the experiment, we show the proposed method achieves a competitive removal quality in terms of realism and diversity. Furthermore, we evaluate ERGAN on several subsequent tasks, such as face verification and facial expression recognition. The experiment shows that our method could serve as a preprocessing method for these tasks.
Asunto(s)
AnteojosRESUMEN
Person re-identification (re-ID) is a cross-camera retrieval task that suffers from image style variations caused by different cameras. The art implicitly addresses this problem by learning a camera-invariant descriptor subspace. In this paper, we explicitly consider this challenge by introducing camera style (CamStyle). CamStyle can serve as a data augmentation approach that reduces the risk of deep network overfitting and that smooths the CamStyle disparities. Specifically, with a style transfer model, labeled training images can be style transferred to each camera, and along with the original training samples, form the augmented training set. This method, while increasing data diversity against overfitting, also incurs a considerable level of noise. In the effort to alleviate the impact of noise, the label smooth regularization (LSR) is adopted. The vanilla version of our method (without LSR) performs reasonably well on few camera systems in which overfitting often occurs. With LSR, we demonstrate consistent improvement in all systems regardless of the extent of overfitting. We also report competitive accuracy compared with the state of the art on Market-1501 and DukeMTMC-re-ID. Importantly, CamStyle can be employed to the challenging problems of one view learning and unsupervised domain adaptation (UDA) in person re-identification (re-ID), both of which have critical research and application significance. The former only has labeled data in one camera view and the latter only has labeled data in the source domain. Experimental results show that CamStyle significantly improves the performance of the baseline in the two problems. Specially, for UDA, CamStyle achieves state-of-the-art accuracy based on a baseline deep re-ID model on Market-1501 and DukeMTMC-reID. Our code is available at: https://github.com/zhunzhong07/CamStyle .
RESUMEN
Sufficient training data normally is required to train deeply learned models. However, due to the expensive manual process for labelling large number of images (i.e., annotation), the amount of available training data (i.e., real data) is always limited. To produce more data for training a deep network, Generative Adversarial Network (GAN) can be used to generate artificial sample data (i.e., generated data). However, the generated data usually does not have annotation labels. To solve this problem, in this paper, we propose a virtual label called Multi-pseudo Regularized Label (MpRL) and assign it to the generated data. With MpRL, the generated data will be used as the supplementary of real training data to train a deep neural network in a semi-supervised learning fashion. To build the corresponding relationship between the real data and generated data, MpRL assigns each generated data a proper virtual label which reflects the likelihood of the affiliation of the generated data to predefined training classes in the real data domain. Unlike the traditional label which usually is a single integral number, the virtual label proposed in this work is a set of weight-based values each individual of which is a number in (0,1] called multi-pseudo label and reflects the degree of relation between each generated data to every pre-defined class of real data. A comprehensive evaluation is carried out by adopting two state-of-the-art convolutional neural networks (CNNs) in our experiments to verify the effectiveness of MpRL. Experiments demonstrate that by assigning MpRL to generated data, we can further improve the person re-ID performance on five re-ID datasets, i.e., Market-1501, DukeMTMC-reID, CUHK03, VIPeR, and CUHK01. The proposed method obtains +6.29%, +6.30%, +5.58%, +5.84%, and +3.48% improvements in rank-1 accuracy over a strong CNN baseline on the five datasets respectively, and outperforms state-of-the-art methods.