RESUMEN
This study employed a two-step Mendelian randomization analysis to explore the causal relationship between telomere length, as a marker of aging, and anorexia nervosa and to evaluate the mediating role of changes in the white matter microstructure across different brain regions. We selected genetic variants associated with 675 diffusion magnetic resonance imaging phenotypes representing changes in brain white matter. F-statistics confirmed the validity of the instruments, ensuring robust causal inference. Sensitivity analyses, including heterogeneity tests, horizontal pleiotropy tests, and leave-one-out tests, validated the results. The results show that telomere length is significantly negatively correlated with anorexia nervosa in a unidirectional manner (p = 0.017). Additionally, changes in specific white matter structures, such as the internal capsule, corona radiata, posterior thalamic radiation, left cingulate gyrus, left longitudinal fasciculus, and left forceps minor (p < 0.05), were identified as mediators. These findings enhance our understanding of the neural mechanisms, underlying the exacerbation of anorexia nervosa with aging; emphasize the role of brain functional networks in disease progression; and provide potential biological targets for future therapeutic interventions.
RESUMEN
Supercritical anti-solvent fluidized bed (SAS-FB) coating technology has the advantages of reducing particle size, preventing high surface energy particle aggregation, improving the dissolution performance and bioavailability of insoluble drugs. The poor solubility of Biopharmaceutics Classification System (BCS) class IV drugs poses challenges in achieving optimal bioavailability. Numerous anti-cancer drugs including paclitaxel (PTX) belong to the BCS class IV, hindering their therapeutic efficacy. To address this concern, our study explored SAS-FB technology to coat PTX with D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) onto lactose. Under our optimized conditions, we achieved a PTX coating efficiency of 96.8%. Further characterization confirmed the crystalline state of PTX in the lactose surface coating by scanning electron microscopy and X-ray powder diffraction. Dissolution studies indicated that SAS-FB processed samples release over 95% of the drug within 1 min. Moreover, cell transmembrane transport assays demonstrated that SAS-FB processed PTX samples co-coated with TPGS had an enhanced PTX internalization into cells and a higher permeability coefficient compared to those without TPGS. Finally, compared to unprocessed PTX, SAS-FB (TPGS) and SAS-FB processed samples showed a 2.66- and 1.49-fold increase in oral bioavailability in vivo, respectively. Our study highlights the efficacy of SAS-FB co-coating for PTX and TPGS as a promising strategy to overcome bioavailability challenges inherent in BCS class IV drugs. Our approach holds broader implications for enhancing the performance of similarly classified medications.
RESUMEN
Hyper-cross-linked polymers (HCPs) with ultra-high porosity, superior physicochemical stability, and excellent cost-effectiveness are attractive candidates for methane storage. However, the construction of HCPs with BET surface areas exceeding 3000 m2 g-1 remains extremely challenging. In this work, a newly developed DBM-knitting method with a slow-knitting rate is employed to increase the cross-linking degree, in which dichloromethane (DCM) is replaced by dibromomethane (DBM) as both solvent and electrophilic cross-linker, resulting in highly porous and physicochemically stable HCPs. The BET surface areas of DBM-knitted SHCPs-Br are 44%-120% higher than that of DCM-knitted SHCPs-Cl using the same building blocks. Remarkably, SHCP-3-Br exhibits an unprecedentedly high porosity (SBET = 3120 m2 g-1) among reported HCPs, and shows a competitive volumetric 5-100 bar working methane capacity of 191 cm3 (STP) cm-3 at 273 K calculated by using real packing density, which outperforms sate-of-art metal-organic framework (MOFs) at comparable conditions. This facile and versatile low-knitting-rate strategy enables effective improvement in the porosity of HCPs for porosity-desired applications.
RESUMEN
The supercritical antisolvent-fluidized bed coating process (SAS-FB) shows great potential as a technique to manufacture dry powder inhaler (DPI) that incorporate nanodrugs onto micronized matrix particles, capitalizing on the merits of both nanoparticle and pulmonary delivery. In this study, naringin (NAR), a pharmacologically active flavonoid with low solubility and in vivo degradation issues, was utilized as a model active pharmaceutical ingredient to construct nanomedicine-based DPI through SAS-FB. It is showed that processed NAR exhibited a near-spherical shape and an amorphous structure with an average size of around 130 nm. Notably, SAS-FB products prepared with different fluidized matrices resulted in varying deposition patterns, particularly when mixed with a coarse lactose to enhance the fine particle fraction (FPF) of the formulations. The FPF was positively associated with specific surface area of the SAS-FB products, while the specific surface area was directly related to surface roughness and particle size. In vitro dissolution studies using simulated lung fluid revealed that the NAR nanoparticles coated on the products were released immediately upon contact with solution, with a cumulative dissolution exceeding 90% within the first minute. Importantly, compared to oral raw NAR, the optimized DPI formulation demonstrated superior in vivo plasmatic and pulmonary AUC0â∞ by 51.33-fold and 104.07-fold respectively in a Sprague-Dawley rat model. Overall, SAS- FB technology provides a practical approach to produce nanomedicine DPI product that combine the benefits of nanoparticles with the aerodynamics properties of inhaled microparticles.
Asunto(s)
Inhaladores de Polvo Seco , Nanomedicina , Ratas , Animales , Inhaladores de Polvo Seco/métodos , Ratas Sprague-Dawley , Administración por Inhalación , Pulmón , Tamaño de la Partícula , PolvosRESUMEN
In this study, chitosan (CS) and phytic acid (PA) were employed as raw materials to synthesize a range of chitosan-phytic acid complexes (CP) with different ratios (CS:PA = 12:1, 9:1, 6:1, 3:1, 1:1). The structures and elemental compositions of the compounds were characterized using Fourier-Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS). The thermal stability of the synthesized materials was analyzed using a Thermogravimetric Analyzer (TG). Electrochemical testing was conducted to explore the corrosion inhibition effect of the modified inhibitors with varying ratios on Q235 steel in 3.5 wt% NaCl solution. Additionally, Scanning Electron Microscopy (SEM) was utilized to investigate the surface morphology of the immersed samples. When the CS:PA ratio was 3:1, CP exhibited an impressive corrosion inhibition efficiency of 94.9 %. Furthermore, the antimicrobial properties of CP were evaluated using the colony plate counting method. At a CS:PA ratio of 1:1, CP demonstrated the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) at 0.1250 % and 0.5000 %, respectively. This research introduces a novel green corrosion inhibitor capable of simultaneously reducing the electrochemical corrosion of Q235 while inhibiting biocorrosion, avoiding the antagonistic effects arising from the simultaneous use of biocides and corrosion inhibitors in the system.
Asunto(s)
Quitosano , Ácido Fítico , Ácido Fítico/farmacología , Quitosano/farmacología , Quitosano/química , Corrosión , Espectroscopía Infrarroja por Transformada de Fourier , Antibacterianos/farmacología , Antibacterianos/químicaRESUMEN
Supercritical anti-solvent fluidized bed (SAS-FB) technology can be applied to reduce particle size, prevent particle aggregation, and improve the dissolution and bioavailability of poorly soluble drugs. In this work, drug-loaded microparticles of three similar structures, the flavonoids luteolin (LUT), naringenin (NGR), and dihydromyricetin (DMY) were prepared using SAS-FB technology, to explore its effect on the coating of flavonoid particles. Operating temperature, pressure, carrier, solvent, and concentration of drug solution were investigated for their effects on the yield and dissolution of flavonoid particles. The results showed that temperature, pressure, carrier, and drug solution concentration have a large effect on yield. Within the study range, low supercritical CO2 density at higher temperature and lower pressure, a larger surface area carrier, and moderate drug solution concentration led to a higher yield. The effect of the solvent on the yield of flavonoids is a result of multiple factors. Scanning electron microscopy (SEM) images showed that the drug-loaded particles prepared from different carriers and solvents have different precipitations pattern on the carrier surface, and their particle sizes were smaller than unprocessed particles and those prepared by the SAS process. Fluorescence microscopy (FM) results showed that the flavonoids were uniformly coated on the carrier. X-ray powder diffraction (XRPD) results showed that the crystalline morphology of SAS-FB particles remained unchanged after the SAS-FB process, although the diffraction peak intensity decreased. The cumulative dissolution of SAS-FB particles was more than four times faster in the first 5 min than that of the unprocessed flavonoids. The antioxidant activity of SAS-FB processed LUT, NGR and DMY was 1.89-3.78 times, 4.92-10.68 times and 0.99-2.57 times higher than that of the untreated flavonoids, respectively. The approach provides a reference for the application of SAS-FB technology in flavonoids.
Asunto(s)
Antioxidantes , Excipientes , Liberación de Fármacos , Flavonoides , Solventes/química , Tamaño de la Partícula , Solubilidad , Microscopía Electrónica de RastreoRESUMEN
Encapsulation technology can increase the stability and maintain the volatile active substances of plant essential oils. In the present study, tree essential oil (TTO) was encapsulated with polylactic acid (PLA) modified by octenyl succinic anhydride chitosan (OSA-CS) as shell materials to form long-term antibacterial and pH-responsive microcapsules. The PLA/OSA-CS@TTO microcapsules were characterized by high performance liquid chromatography (HPLC), scanning electron microscopy (SEM) and antibacterial performance testing. The results showed that the average particle size of microcapsules was 10 µm, and the encapsulation efficiency and drug loading efficiency of TTO reached 81.5 % and 60.3 %. After 4800 min of release in media at different pH (5 and 7) still sequestered 55.32 % and 56.74 % of TTO which approved the shell of microcapsules responded to different pH values. The microcapsules remained stable for 80 days after drying, and preserving 39.7 % of the core material. The morphology of PLA/OSA-CS@TTO microcapsules revealed that the PLA/OSA-CS@TTO microcapsules presented smooth and firm structure. Antibacterial test for staphylococcus aureus of those microcapsules implied that the bacteriostatic rate reached 100 % after 72 h. Bio-based macromolecular modification strategies can provide inspiration for the development of green microcapsules.
Asunto(s)
Quitosano , Aceites Volátiles , Aceite de Árbol de Té , Antibacterianos/química , Antibacterianos/farmacología , Cápsulas/química , Quitosano/química , Concentración de Iones de Hidrógeno , Aceites Volátiles/química , Aceites de Plantas , Poliésteres , Anhídridos Succínicos/químicaRESUMEN
The protein corona on nanoparticles (NPs) is a critical problem that often screens the targeting molecules and becomes one of the key reasons for the lack of practical application in nanotherapy. It is critical to fully understand the mechanism of the nanoparticle-biological interactions to design the nanoparticle-based therapeutic agents. Some types of proteins can be precoated on the nanoparticles to avoid unwanted protein attachment; however, the ultralow level of protein corona is hard to achieve, and the relationship of the antifouling property of the precoated protein nanoparticles with protein conformation and protein-nanoparticle interaction energy has never been investigated. In this work, we provided the quantitative protein corona composition analysis on different precoated protein nanoparticles, and on the basis of the molecular simulation process, we found their antifouling property strongly depended on the interaction energy of the precoated protein-serum protein pair and the number of hydrogen bonds formed between them. Furthermore, it also depended on the nanoparticle-serum protein pair interaction energy and the protein conformation on the nanoparticle. The casein coated nanoparticle with the antifouling property was determined, and after aptamer conjugation and drug loading, they exhibited superior targeting and internalization behavior for photodynamic and photothermal therapy in vitro and in vivo. Our work adds to the understanding of the protein corona behavior of precoated protein nanoparticles, and the determined antifouling NP can potentially be used as a highly efficient nanodrug carrier.
Asunto(s)
Materiales Biomiméticos/química , Nanopartículas/química , Corona de Proteínas/análisis , Ensayo de Materiales , Simulación de Dinámica Molecular , Tamaño de la PartículaRESUMEN
The protein corona on nano drug carriers is an important well-known biological issue that often induces biological incompatibility and screens the targeting molecules on the surfaces of carriers, thus causing a loss of targeting specificity. Although polyethylene glycol (PEG) and zwitterionic polymers have been widely used as anti-fouling materials, there still remain critical challenges for their use as protein-corona agents for drug delivery and targeting. Here, we have designed novel amphoteric natural starch-stabilized core-shell colloidal nanoparticles with more efficient protein corona-free properties, under long term circulation, at different protein concentrations and in different protein charge environments, compared to typical anti-fouling materials such as PEG and zwitterionic polymers. More importantly, the starch-coated polymer nanoparticles can be further functionalized by antibodies to achieve additional excellent targeting and cell internalization capabilities for their use in photodynamic therapy. Our findings demonstrate a novel protein-free or anti-fouling natural material that is very promising for use as highly efficient nano drug carriers and marine coatings.
Asunto(s)
Materiales Biocompatibles Revestidos/química , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Polietilenglicoles/química , Corona de Proteínas/química , Almidón/química , HumanosRESUMEN
We constructed a peptide consisting of a staphylococcal AgrD1 pheromone fused to the channel-forming domain of colicin Ia and named it pheromonicin. This fusion peptide had bactericidal effects against methicillin-sensitive and methicillin-resistant Staphylococcus aureus (MSSA and MRSA, respectively), but not against Staphylococcus epidermidis or Streptococcus pneumoniae. Growth rates, vital staining and colony forming unit (CFU) counts showed that pheromonicin did not merely suppress growth but killed S. aureus cells. The specificity of pheromonicin was shown by the absence of bactericidal effects against an accessory gene regulator (agr) locus knockout of S. aureus, and a dose-dependent inhibition of the bactericidal effects of pheromonicin by competition with corresponding free AgrD pheromone. In vivo, all pheromonicin-treated mice survived administration of MRSA that was lethal to controls. No toxicity was detectable in human liver or renal cells in culture, or in livers, kidneys or spleens of pheromonicin-treated mice. The results suggest that these types of chimeric peptides may be of value as antibiotics against specific bacterial infections.