Photoactivated Formation of an Extravascular Dynamic Hydrogel as an Intelligent Blood Flow Regulator to Reprogram the Immunogenic Landscape.

Long-term tumor starvation may be a potential strategy to elevate the antitumor immune response by depriving nutrients. However, combining long-term starvation therapy with immunotherapy often yields limited efficacy due to the blockage of immune cell migration pathways. Herein, an intelligent blood flow regulator (BFR) is first established through photoactivated in situ formation of the extravascular dynamic hydrogel to compress blood vessels, which can induce long-term tumor starvation to elicit metabolic stress in tumor cells without affecting immune cell migration pathways. By leveraging methacrylate-modified nanophotosensitizers (HMMAN) and biodegradable gelatin methacrylate (GelMA), the developed extravascular hydrogel dynamically regulates blood flow via enzymatic degradation. Additionally, aPD-L1 loaded into HMMAN continuously blocks immune checkpoints. Systematic in vivo experiments demonstrate that the combination of immune checkpoint blockade (ICB) and BFR-induced metabolic stress (BIMS) significantly delays the progression of Lewis lung and breast cancers by reshaping the tumor immunogenic landscape and enhancing antitumor immune responses.

Comparative efficacy and safety of different drugs in patients with systemic juvenile idiopathic arthritis: A systematic review and network meta-analysis.

BACKGROUND: The goal of this study was to estimate the relative efficacy and safety of different biological agents (infliximab, canakinumab, baricitinib, anakinra, adalimumab, tofacitinib, tocilizumab, and rilonacept) compared with placebo for systemic juvenile idiopathic arthritis (JIA) patients, through a network meta-analysis. METHODS: Pubmed, Embase, and Cochrane Library were searched from database inception to July 2023 for randomized controlled trials comparing different biological agents (infliximab, canakinumab, baricitinib, anakinra, adalimumab, tofacitinib, tocilizumab, and rilonacept) or placebo directly or indirectly in JIA. Bayesian network meta-analyses were conducted. Data was extracted and analyzed by R with gemtc package. The treatment options were ranked using the surface under the cumulative ranking curve (SUCRA) value. RESULTS: We identified 10 randomized controlled trials and analyzed 898 participants. Canakinumab (odds ratio 55.0, 95% credible intervals 2.4-67.0) was more effective than the placebo, and the difference was statistically significant. However, there was no statistical significance between other drugs versus placebo in terms of the modified ACRpedi30 (P > .05). The SUCRA shows that canakinumab ranked first (SUCRA, 86.9%), anakinra ranked second (SUCRA, 77.7%), adalimumab ranked third (SUCRA, 61.9%), and placebo ranked the last (SUCRA, 6.3%). Nevertheless, there were no notable discrepancies in the occurrence of adverse events, hepatic-related adverse events, infectious adverse event, serious adverse events, and serious infection following treatment with canakinumab, anakinra, tocilizumab, rilonacept, or the placebo. Based on the clustergram of modified ACRpedi30 and adverse events, canakinumab is suggested for JIA according to the surface under SUCRAs considering the symptom and adverse events simultaneously. CONCLUSIONS: Among patients with JIA, canakinumab exhibited the highest likelihood of being the optimal treatment for achieving the modified ACRpedi30 response rate, and neither of the tested biological agents carried a significant risk of serious adverse events.

Embryo Transfer Strategies for Women with Recurrent Implantation Failure During the Frozen-thawed Embryo Transfer Cycles: Sequential Embryo Transfer or Double-blastocyst Transfer?

OBJECTIVE: Both sequential embryo transfer (SeET) and double-blastocyst transfer (DBT) can serve as embryo transfer strategies for women with recurrent implantation failure (RIF). This study aims to compare the effects of SeET and DBT on pregnancy outcomes. METHODS: Totally, 261 frozen-thawed embryo transfer cycles of 243 RIF women were included in this multicenter retrospective analysis. According to different embryo quality and transfer strategies, they were divided into four groups: group A, good-quality SeET (GQ-SeET, n=38 cycles); group B, poor-quality or mixed-quality SeET (PQ/MQ-SeET, n=31 cycles); group C, good-quality DBT (GQ-DBT, n=121 cycles); and group D, poor-quality or mixed-quality DBT (PQ/MQ-DBT, n=71 cycles). The main outcome, clinical pregnancy rate, was compared, and the generalized estimating equation (GEE) model was used to correct potential confounders that might impact pregnancy outcomes. RESULTS: GQ-DBT achieved a significantly higher clinical pregnancy rate (aOR 2.588, 95% CI 1.267-5.284, P=0.009) and live birth rate (aOR 3.082, 95% CI 1.482-6.412, P=0.003) than PQ/MQ-DBT. Similarly, the clinical pregnancy rate was significantly higher in GQ-SeET than in PQ/MQ-SeET (aOR 4.047, 95% CI 1.218-13.450, P=0.023). The pregnancy outcomes of GQ-SeET were not significantly different from those of GQ-DBT, and the same results were found between PQ/MQ-SeET and PQ/MQ-DBT. CONCLUSION: SeET relative to DBT did not seem to improve pregnancy outcomes for RIF patients if the embryo quality was comparable between the two groups. Better clinical pregnancy outcomes could be obtained by transferring good-quality embryos, no matter whether in SeET or DBT. Embryo quality plays a more important role in pregnancy outcomes for RIF patients.

One-Step Syntheses of 3,4-Disubstituted Isochroman-1-ones by the Annulation of Benzoic Acids with Nitroalkenes.

The Rh(III)-catalyzed annulation of benzoic acids with nitroalkenes was disclosed to afford a wide range of 3,4-disubstituted isochroman-1-ones with excellent regioselectivity and high catalytic efficiency. Both aromatic and aliphatic nitroalkenes participated in this cyclization reaction successfully. The synthetic value of 3,4-disubstituted isochroman-1-ones was proven by a series of derivatizations. Furthermore, a reliable mechanism is outlined on the basis of experimental investigations and related precedents.

The Protective Effect of a Human Umbilical Cord Mesenchymal Stem Cell Supernatant on UVB-Induced Skin Photodamage.

The skin is constantly exposed to a range of environmental stressors, including ultraviolet (UV) radiation, which can cause damage to the skin. Repairing UV-damaged skin has been a major focus of research in recent years. The therapeutic potential of human umbilical cord mesenchymal stem cells (HUCMSCs) exhibits anti-photoaging properties. In this study, we developed a strategy for concentrating an HUCMSC supernatant, and examined the protective effects of CHS on UVB exposure in vitro and in vivo. Our results demonstrate that CHS repairs UVB exposure by promoting cell viability and migration and reducing senescent and apoptosis cells. We further found that the photoprotective effect of CHS is due to autophagy activation. Moreover, CHS reduces wrinkles and senescent cells, increases collagen expression, and improves immune function in UVB exposure-induced skin damage. In summary, our study provides a new approach for repairing cell damage, and suggests that CHS might be a potential candidate for preventing UVB-induced skin photodamage.

Spontaneous unscarred uterine rupture at 13 weeks of gestation after in vitro fertilization-embryo transfer: A case report and literature review.

RATIONALE: Uterine rupture (UR) during pregnancy is a serious obstetric complication. Here we report a case of spontaneous rupture in an unscarred uterus at 13 weeks of gestation after in vitro fertilization embryo transfer, which is not common in past references. Our focus is to understand the relationship between systemic lupus erythematosus (SLE) and UR. PATIENT CONCERNS: A 33-year-old infertile woman with a history of SLE became pregnant after in vitro fertilization embryo transfer. She presented with sudden mental fatigue and dyspnea, accompanied by sweating, dizziness and lower abdominal pain at 13 weeks of gestation. DIAGNOSES: Blood analysis revealed anemia. Ultrasonography and plain computed tomography scan revealed intrauterine early pregnancy with effusion in pelvic and abdominal cavity. Laparotomy confirmed the diagnosis of UR. INTERVENTIONS: The patient underwent emergency laparotomy. Upon surgery, multiple myometrium was weak with only serosal layer visible, and there was a 2.5 cm irregular breach with exposed placenta and villous tissue in the posterior wall of the uterus. After removing intrauterine fetus and repairing the breach, there was still persistent intraperitoneal hemorrhage. The patient underwent subtotal hysterectomy finally. OUTCOMES: Postoperative recovery was uneventful. The patient was discharged on the 8th day after operation. LESSONS: Combined efforts of specialists from ultrasound, imaging and gynecologist led to the successful diagnosis and management of this patient. We should be cautious about the occurrence of unscarred uterus rupture during pregnancy of the women with the disease of SLE and long-term glucocorticoid treatment. In IVF, we had better transfer one embryo for these patients with the history of SLE. Obstetricians should strengthen labor tests to detect early signs of UR of the patients with SLE and long term glucocorticoid treatment. Once UR is suspected, prompt surgical treatment is needed as soon as possible.

D6 high-quality expanded blastocysts and D5 expanded blastocysts have similar pregnancy and perinatal outcomes following single frozen blastocyst transfer.

Objective: We compared the pregnancy and perinatal outcomes between expanded blastocysts vitrified on D5 versus D6 following single frozen blastocyst transfer. Methods: Clinical data on 7,606 cycles of frozen-thawed blastocyst implantations were retrospectively analyzed. Depending on whether blastocysts were vitrified on D5 or D6 and the transferred blastocysts, the blastocysts were divided into 6 groups: HQB-D5, HQB-D6, 4XC-D5, 4XC-D6, 4CX-D5, and 4CX-D6 groups. The differences in clinical pregnancy rate, live birth rate, first trimester abortion rate, preterm birth rate, gestational age, birth weight, and sex ratio at birth among the groups were compared. Results: Our study showed that there was no difference in pregnancy and perinatal outcomes between the delayed formation of D6 high-quality expanded blastocysts and D5 expanded blastocysts, whether they were high-quality blastocysts or not. For low-quality blastocysts, the clinical pregnancy rate of D5 was higher than that of D6, and D5 was also better than D6 in live birth rate for those with inner cell mass rating B or above, while there was no difference between D5 and D6 for those with inner cell mass rating C. Conclusion: Based on our research, we suggest that when we are developing the implantation strategy, we give priority to the selection of high-quality expanded blastocysts, regardless of D5 and D6, whose clinical outcomes are not different. For low-quality blastocysts, D5 expanded blastocysts are preferred for transfer.

Temperature Cycle Reliability Analysis of an FBAR Filter-Bonded Ceramic Package.

On the background that the operating frequency of electronic devices tends to the radio frequency (RF) segment, a film bulk acoustic resonator (FBAR) filter is widely used in communication and military fields because of its advantages of high upper frequency, ample power capacity, small size, and low cost. However, the complex and harsh working environment puts higher requirements for packaging FBAR filters. Based on the Anand constitutive equation, the stress-strain response of the bonded ceramic package was studied by the finite element method for the FBAR filter-bonded ceramic package, and the thermal fatigue life of the device was predicted. We developed solder models with various spillage morphologies based on the random generation technique to examine the impact of spillage on device temperature reliability. The following are the primary conclusions: (1) Solder undergoes periodic deformation, stress, and strain changes throughout the cycle. (2) The corner of the contact surface between the chip and the solder layer has the largest stress at the end of the cycle, measuring 19.377 MPa. (3) The Engelmaier model predicts that the gadget will have a thermal fatigue life of 1928.67 h. (4) Expanding the layered solder area caused by any solder overflow mode may shorten the device's thermal fatigue life. The thermal fatigue life of a completely spilled solder is higher than that of a partially spilled solder.

Preparation and Performance of Silicone Rubber Composites Modified by Polyurethane.

Silicone rubber composites with good comprehensive properties modified with polyurethane were obtained through mixing and vulcanizing methods. Firstly, the polyurethane prepolymer with double bonds was prepared by polytetrahydrofuran glycol (PTMG, Mn = 1000), isophorone diisocyanate (IPDI), and 2-hydroxyethyl methacrylate (HEMA). The prepolymer was then added to the silicone rubber compounds to prepare silicone rubber composites, combining the excellent properties of polyurethane with the silicone rubber materials. The effects of polyurethane content on the mechanical properties, insulation, hydrophobicity, thermal stability, and flame retardancy of composites were studied in detail. The results showed that the silicone rubber composites not only have good hydrophobicity, thermal stability and flame retardant properties, but the addition of polyurethane significantly improves the tensile strength at room and low temperatures and the volume resistivity of the materials. The tensile strength increased by 32.5%, and the volume resistivity nearly doubled. The excellent electrical insulation, high hydrophobicity and good mechanical properties make the silicone rubber composites appropriate for use in the field of polymeric house arresters.

Peroxynitrite-Scavenging Organosilica Nanomedicines for Light-Controllable NO Release and Precision On-Demand Glaucoma Therapy.

Nitric oxide (NO) is a promising approach for treating ocular hypertension and glaucoma. However, its clinical application is limited by its uncontrollable release and the unwanted overproduction of peroxynitrite. Herein, a denitrifying hollow mesoporous organosilica nanoparticle (HMMN) with framework cohybridization is first constructed to encapsulate S-nitroso-N-acetyl-d,l-penicillamine (SNAP) to produce SNAP@HMMN with dual capacities of selective peroxynitrite removal and controllable NO release. Featuring a large corneal permeability, the well-designed SNAP@HMMN can achieve trans-corneal delivery to reach the target trabecular meshwork (TM)/Schlemm's canal (SC) site. Upon light irradiation, the intraocular pressure (IOP) is appropriately lowered in an adjustable and long-lasting manner while the outflow tissues are protected from nitrative damage, which is expected to realize precision on-demand glaucoma therapy with little biosafety concern, promising significant clinical translational potential.

Sensitive detection of Escherichia coli in diverse foodstuffs by electrochemical aptasensor based on 2D porphyrin-based COF.

The two-dimensional porphyrin-based covalent organic framework (denoted by Tph-TDC-COF) was used as the sensitive layerto build an aptamer-based electrochemical sensor for the detection of Escherichia coli (E.coli). Tph-TDC-COF produced with 5,10,15,20-tetrakis(4-aminophenyl)-21H, 23H-porphine (Tph) and [2,2'-bithiophene]-2,5'-dicarbaldehyde (TDC) as building blocks exhibited a highly conjugated structure, outstanding conductivity, large specific surface area, and strong bioaffinity towards aptamers. The adoption of Tph-TDC-COF-modified electrode resulted in improved sensing performance and increased anchoring affinity toward the E.coli-targeted aptamer. Under optimal conditions, the Tph-TDC-COF-based electrochemical aptasensor demonstrated an extremely low detection limit of 0.17 CFU mL-1 for E.coli detection within a linear range of 10 to 1 × 108 CFU mL-1, accompanied by good stability, excellent reproducibility and regeneration ability, and wide practical applications. The current electrochemical aptasensing technique has the potential to be extended to detect different foodborne bacteria using specific aptamer, therefore widening the application of COFs in biosensing and food safety fields.

Influence of electron donor and acceptor substituents on tuning the nonlinear optical properties of zinc phthalocyanine derivatives.

Four phthalocyanine derivatives with different electron donor and acceptor substituents (B1, B2, B3, and B4) were synthesized by a solid-phase melting method. The influence of substituent type on the nonlinear optical properties of the materials was investigated in detail. In the case of similar conjugated structures, B3, which has amino electron-donor groups, presents high intramolecular charge transfer, a low energy gap (2.05 eV), and good nonlinear optical properties. Compared with B3, B4 has a larger π-conjugated structure and its energy gap is 0.04 eV smaller. Moreover, B4 has stronger reverse saturation absorption (7 × 10-12 m/W) and optical limiting performance. The four phthalocyanine derivatives exhibit third harmonic generation (THG) characteristics. Furthermore, the third harmonic strengths of B1, B2, B3, and B4 are 4 times, 9 times, 11 times, and 21 times that of SiO2, respectively. So, B4 has the best application potential in laser protection and frequency conversion.

Development of Cotton Picker Fire Monitoring System Based on GA-BP Algorithm.

Due to the characteristics of the cotton picker working in the field and the physical characteristics of cotton, it is easy to burn during the operation, and it is difficult to be detected, monitored, and alarmed. In this study, a fire monitoring system of cotton pickers based on GA optimized BP neural network model was designed. By integrating the monitoring data of SHT21 temperature and humidity sensors and CO concentration monitoring sensors, the fire situation was predicted, and an industrial control host computer system was developed to monitor the CO gas concentration in real time and display it on the vehicle terminal. The BP neural network was optimized by using the GA genetic algorithm as the learning algorithm, and the data collected by the gas sensor were processed by the optimized network, which effectively improved the data accuracy of CO concentration during fires. In this system, the CO concentration in the cotton box of the cotton picker was validated, and the measured value of sensor was compared with the actual value, which verified the effectiveness of the optimized BP neural network model with GA. The experimental verification showed that the system monitoring error rate was 3.44%, the accurate early warning rate was over 96.5%, and the false alarm rate and the missed alarm rate were less than 3%. In this study, the fire of cotton pickers can be monitored in real time and an early warning can be made in time, and a new method was provided for accurate monitoring of fire in the field operation of cotton pickers.

Comprehensive landscape of the T and B-cell repertoires of newly diagnosed gestational diabetes mellitus.

This study conducted a high-throughput sequencing analysis of the T- and B- repertoires in the newly diagnosed GDM patients and evaluated the association between abnormal adaptive immunity and GDM. The unique TCR CDR3 clonotypes were mildly decreased in GDM patients, and the similarity of TCR V-J distributions was higher in the GDM group. Moreover, the usages of the V gene and V-J pair and the frequency distributions of some CDR3 amino acids (AAs) both in BCR and TCR were significantly different between groups. Moreover, the cytokines including IL-4, IL-6, IFN-γ and IL-17A were synchronously elevated in the GDM cases. Our findings provide a comprehensive view of BCR and TCR repertoires at newly diagnosed GDM patients, revealing the mild reduction in unique TCRB CDR3 sequences and slight alteration of the V gene, V-J combination and CDR3 (AA) usages of BCR and TCR. This work provides deep insight into the mechanism of maternal adaptive immunity in GDM and provides novel diagnostic biomarkers and potential immunotherapy targets for GDM.

Near-Infrared-Activatable PROTAC Nanocages for Controllable Target Protein Degradation and On-Demand Antitumor Therapy.

As a novel protein knockdown tool, proteolysis targeting chimeras (PROTACs) can induce potent degradation of target proteins by hijacking E3 ubiquitin ligases. However, the uncontrollable protein disruption of PROTACs is prone to cause "off-target" toxicity after systemic administration. Herein, we designed a photocaged-PROTAC (phoBET1) and loaded it in UCNPs-based mesoporous silica nanoparticles (UMSNs) to construct a NIR light-activatable PROTAC nanocage (UMSNs@phoBET1) for controllable target protein degradation. Upon NIR light (980 nm) irradiation, UMSNs@phoBET1 nanocages could be activated to release active PROTAC via a controlled pattern for degrading bromodomain-containing protein 4 (BRD4) and inducing MV-4-11 cancer cell apoptosis. In vivo experiments demonstrated that UMSNs@phoBET1 nanocages were capable of responding to NIR light in tumor tissues to achieve BRD4 degradation and effectively suppress tumor growth. This NIR light-activatable PROTAC nanoplatform compensates for the current shortcomings of short-wavelength light-controlled PROTACs and presents a paradigm for the precise regulation of PROTACs in living tissues.

Temperature, Doping, and Chemical Potential Tuning Intrinsic Defects Concentration in Bi2MoO6: GGA + U Method.

Using the GGA + U method, the formation energy and concentration of intrinsic defects in Bi2MoO6 are explored under different chemical conditions, with/without doping, from 120 to 900 K. We find that the intrinsic defect and carrier concentration can be deduced from the small range of calculated Fermi levels in the diagram of formation energy vs Fermi level under different conditions. Once the doping conditions or/and temperature are determined, the corresponding EF is only limited to a special region in the diagram of formation energy vs Fermi level, from which the magnitude relationship of defects concentration can be directly derived from their formation energy. The lower the defect formation energy is, the higher the defect concentration is. With EF moving under different doping conditions, the intrinsic defect concentration changes accordingly. At the same time, the highest electron concentration at the relative O-poor (point HU) with only intrinsic defects confirms its intrinsic n-type behavior. Moreover, upon A-/D+ doping, EF moves closer to VBM/CBM for the increasing concentration of holes/electrons. The electron concentration can also be further improved after D+ doping, indicating that D+ doping under O-poor chemical growth conditions is positive to improve its photogenerated carriers. This provides us with a method to adjust the intrinsic defect concentration and deepens our knowledge about comprehension and application of the diagram of formation energy vs Fermi level.

Design and Synthesis of Novel Oxathiapiprolin Derivatives as Oxysterol Binding Protein Inhibitors and Their Application in Phytopathogenic Oomycetes.

Oomycetes, particularly those from the genus Phytophthora, are significant threats to global food security and natural ecosystems. Oxathiapiprolin (OXA) is an effective oomycete fungicide that targets an oxysterol binding protein (OSBP), while the binding mechanism of OXA is still unclear, which limits the pesticide design, induced by the low sequence identity of Phytophthora and template models. Herein, we generated the OSBP model of the well-reported Phytophthora capsici using AlphaFold 2 and studied the binding mechanism of OXA. Based on it, a series of OXA analogues were designed. Then, compound 2l, the most potent candidate, was successfully designed and synthesized, showing a control efficiency comparable to that of OXA. Moreover, field trial experiments showed that 2l exhibited nearly the same activity (72.4%) as OXA against cucumber downy mildew at 25 g/ha. The present work indicated that 2l could be used as a leading compound for the discovery of new OSBP fungicides.

Three-Dimensional Integrated Fan-Out Wafer-Level Package Micro-Bump Electromigration Study.

To meet the demands for miniaturization and multi-functional and high-performance electronics applications, the semiconductor industry has shifted its packaging approach to multi-chip vertical stacking. Among the advanced packaging technologies for high-density interconnects, the most persistent factor affecting their reliability is the electromigration (EM) problem on the micro-bump. The operating temperature and the operating current density are the main factors affecting the EM phenomenon. Therefore, when a micro-bump structure is in the electrothermal environment, the EM failure mechanism of the high-density integrated packaging structure must be studied. To investigate the relationship between loading conditions and EM failure time in micro-bump structures, this study established an equivalent model of the vertical stacking structure of fan-out wafer-level packages. Then, the electrothermal interaction theory was used to carry out numerical simulations in an electrothermal environment. Finally, the MTTF equation was invoked, with Sn63Pb37 as the bump material, and the relationship between the operating environment and EM lifetime was investigated. The results showed that the current aggregation was the location where the bump structure was most susceptible to EM failure. The accelerating effect of the temperature on the EM failure time was more obvious at a current density of 3.5 A/cm2, which was 27.51% shorter than 4.5 A/cm2 at the same temperature difference. When the current density exceeded 4.5 A/cm2, the change in the failure time was not obvious, and the maximum critical value of the micro-bump failure was 4 A/cm2~4.5 A/cm2.

Synthesis and nonlinear optical properties of polyurethane composites containing a pyrene derivative.

The pyrene derivative (PD) was synthesized with pyrene-1-carboxaldehyde and p-aminoazobenzene by a Schiff base reaction. Then the obtained PD was dispersed in polyurethane (PU) prepolymer to prepare polyurethane/pyrene derivative PU/PD materials with good transmittance. The nonlinear optical (NLO) performances of the PD and PU/PD materials were studied by the Z-scan technique under picosecond and femtosecond laser pulses. The PD has reverse saturable absorption (RSA) properties under the excitation of 532 nm 15 ps pulses, 650 and 800 nm 180 fs pulses, and a low optical limiting (OL) threshold (0.01J/c m 2). The PU/PD has a larger RSA coefficient than that of the PD under 532 nm 15 ps pulses. With the enhanced RSA, the PU/PD materials exhibit excellent OL (OL) performance. Good NLO properties, high transparency, and easy processing performances make the PU/PD an excellent choice for use in OL and laser protection fields.

A flexible organic mechanoluminophore device.

A flexible mechanoluminophore device that is capable of converting mechanical energy into visualizable patterns through light-emission holds great promise in many applications, such as human-machine interfaces, Internet of Things, wearables, etc. However, the development has been very nascent, and more importantly, existing mechanoluminophore materials or devices emit light that cannot be discernible under ambient light, in particular with slight applied force or deformation. Here we report the development of a low-cost flexible organic mechanoluminophore device, which is constructed based on the multi-layered integration of a high-efficiency, high-contrast top-emitting organic light-emitting device and a piezoelectric generator on a thin polymer substrate. The device is rationalized based on a high-performance top-emitting organic light-emitting device design and maximized piezoelectric generator output through a bending stress optimization and have demonstrated that it is discernible under an ambient illumination as high as 3000 lux. A flexible multifunctional anti-counterfeiting device is further developed by integrating patterned electro-responsive and photo-responsive organic emitters onto the flexible organic mechanoluminophore device, capable of converting mechanical, electrical, and/or optical inputs into light emission and patterned displays.