Using an external electric field to tune active layer morphology enabling high-efficiency organic solar cells via ambient blade coating.

The nanoscale morphology of the photoactive layer notably impacts the performance of organic solar cells (OSCs). Conventional methods to tune the morphology are typically chemical approaches that adjust the properties (such as solubility and miscibility) of the active components including donor, acceptor, and/or additive. Here, we demonstrate a completely different approach by applying an external electric field (EEF) on the active layer during the wet coating. The EEF-coating method is perfectly compatible with an ambient blade coating using environmentally friendly solvents, which are essential requirements for industrial production of OSCs. A record 18.6% efficiency is achieved using the EEF coating, which is the best value for open-air, blade-coated OSCs to date. Our findings suggest broad material applicability and attribute-enhanced performance to EEF-induced fiber formation and long-range ordering of microstructures of acceptor domains. This technique offers an effective method for producing high-performance OSCs, especially suited for industry OSC production based on open-air printing.

The Role of Grain Boundaries on Ion Migration and Charge Recombination in Halide Perovskites.

Grain boundaries (GBs) have a significant role in polycrystalline perovskite solar cells (PSCs). However, there is ongoing debate regarding the impact of GBs on the performance and long-term stability of PSCs. Employing the first-principles molecular dynamics for perovskites, the iodine vacancy defect migrations both in bulk and at GBs are investigated. i) The positive iodine vacancy (VI +) is found that have both lower formation energy (1.4 eV) and activation energy (0.18 eV) than those of neutral iodine vacancy (VI), statistically. It indicated the VI + acts as the dominant migrated iodine vacancy rather than VI; ii) the iodine vacancy at GBs has ≈0.48 eV higher activation energy than those in bulk, which leads to the accumulation of iodine vacancy at GBs; iii) the presence of VI + result in a 3-fold increase in charge recombination ratio at GBs, compared to pristine PSCs. Based on quantum molecular dynamics statistical results, which are consistent with experimental measurements, insights into iodine vacancy migration both at GBs and in the bulk are gained. This understanding can be valuable for defects engineering related to ion migration, in order to improve the long-term stability and promote the performance of PSCs.

Engineer Nanoscale Defects into Selective Channels: MOF-Enhanced Li+ Separation by Porous Layered Double Hydroxide Membrane.

Two-dimensional (2D) membrane-based ion separation technology has been increasingly explored to address the problem of lithium resource shortage, yet it remains a sound challenge to design 2D membranes of high selectivity and permeability for ion separation applications. Zeolitic imidazolate framework functionalized modified layered double hydroxide (ZIF-8@MLDH) composite membranes with high lithium-ion (Li+) permeability and excellent operational stability were obtained in this work by in situ depositing functional ZIF-8 nanoparticles into the nanopores acting as framework defects in MLDH membranes. The defect-rich framework amplified the permeability of Li+, and the site-selective growth of ZIF-8 in the framework defects bettered its selectivity. Specifically speaking, the ZIF-8@MLDH membranes featured a high permeation rate of Li+ up to 1.73 mol m-2 h-1 and a desirable selectivity of Li+/Mg2+ up to 31.9. Simulations supported that the simultaneously enhanced selectivity and permeability of Li+ are attributed to changes in the type of mass transfer channels and the difference in the dehydration capacity of hydrated metal cations when they pass through nanochannels of ZIF-8. This study will inspire the ongoing research of high-performance 2D membranes through the engineering of defects.

Integrated Uniformly Microporous C4 N/Multi-Walled Carbon Nanotubes Composite Toward Ultra-Stable and Ultralow-Temperature Proton Batteries.

Benefiting from the proton's small size and ultrahigh mobility in water, aqueous proton batteries are regarded as an attractive candidate for high-power and ultralow-temperature energy storage devices. Herein, a new-type C4 N polymer with uniform micropores and a large specific surface area is prepared by sulfuric acid-catalyzed ketone amine condensation reaction and employed as the electrode of proton batteries. Multi-walled carbon nanotubes (MWCNT) are introduced to induce the in situ growth of C4 N, and reaped significantly enhanced porosity and conductivity, and thus better both room- and low-temperature performance. When coupled with MnO2 @Carbon fiber (MnO2 @CF) cathode, MnO2 @CF//C4 N-50% MWCNT full battery shows unprecedented cycle stability with a capacity retention of 98% after 11 000 cycles at 10 A g-1 and even 100% after 70 000 cycles at 20 A g-1 . Additionally, a novel anti-freezing electrolyte (5 m H2 SO4  + 0.5 m MnSO4 ) is developed and showed a high ionic conductivity of 123.2 mS cm-1 at -70 °C. The resultant MnO2 @CF//C4 N-50% MWCNT battery delivers a specific capacity of 110.5 mAh g-1 even at -70 °C at 1 A g-1 , the highest in all reported proton batteries under the same conditions. This work is expected to offer a package solution for constructing high-performance ultralow-temperature aqueous proton batteries.

Strain-Tunable Electronic and Transport Properties of One-Dimensional Fibrous Phosphorus Nanotubes.

The one-dimensional van der Waals (1D vdW) material fibrous red phosphorus (FRP) nanotubes are a promising direct-bandgap semiconductor with high carrier mobility and anisotropic optical responses because of low deformation potential and dangling-bond-free anisotropic interface. Employing first-principles calculations, we captured the potential of 1D FRP nanotubes. The thermal stability of 1D FRP nanotubes was confirmed by phonon calculation. Meanwhile, Raman spectroscopy indicated the strong vibration mode (366 cm-1) is along the phosphorus nanotube. Interestingly, spatial anisotropy bandgaps were found along with various stacking orientations. The charge transport calculations showed that the 1D FRP nanotube has a high hole mobility (499.2 cm2 V-1 s-1), considering the weak acoustic phonon scattering. More importantly, we found that the hole mobility changes dramatically (down to 7.1 cm2 V-1 s-1) under the strain, and the strain-dependent charge transport property of 1D FRP nanotubes could be considered to have many potential applications for electronics, optoelectronics, and switching devices.

Interfacial Designing of MnO2 Half-Wrapped by Aromatic Polymers for High-Performance Aqueous Zinc-Ion Batteries.

Due to the excellent specific capacity and high working voltage, manganese oxide (MnO2 ) has attracted considerable attention for aqueous zinc-ion batteries (AZIBs). However, the irreversible structural collapse and sluggish ionic diffusion lead to poor rate capability and inferior lifespan. Herein, we proposed a novel organic/inorganic hybrid cathode of carbon-based poly(4,4'-oxybisbenzenamine)/MnO2 (denoted as C@PODA/MnO2 ) for AZIBs. Various in/ex situ analyses and theoretical calculations prove that PODA chains with C=N groups can provide a more active surface/interface for ion/electron mobility and zinc ion storage in the hybrid cathode. More importantly, newly formed Mn-N interfacial bonds can effectively promote ion diffusion and prevent Mn atoms dissolution, enhancing redox kinetics and structural integrity of MnO2 . Accordingly, C@PODA/MnO2 cathode exhibits high capacity (321 mAh g-1 or 1.7 mAh cm-2 at 0.1 A g-1 ), superior rate performance (88 mAh g-1 at 10 A g-1 ) and excellent cycling stability over 2000 cycles. Hence, rational interfacial designs shed light on the development of organic/inorganic cathodes for advanced AZIBs.

Electrically tunable two-dimensional heterojunctions for miniaturized near-infrared spectrometers.

Miniaturized spectrometers are of considerable interest for their portability. Most designs to date employ a photodetector array with distinct spectral responses or require elaborated integration of micro & nano optic modules, typically with a centimeter-scale footprint. Here, we report a design of a micron-sized near-infrared ultra-miniaturized spectrometer based on two-dimensional van der Waals heterostructure (2D-vdWH). By introducing heavy metal atoms with delocalized electronic orbitals between 2D-vdWHs, we greatly enhance the interlayer coupling and realize electrically tunable infrared photoresponse (1.15 to 1.47 µm). Combining the gate-tunable photoresponse and regression algorithm, we achieve spectral reconstruction and spectral imaging in a device with an active footprint < 10 µm. Considering the ultra-small footprint and simple fabrication process, the 2D-vdWHs with designable bandgap energy and enhanced photoresponse offer an attractive solution for on-chip infrared spectroscopy.