Ultrasensitive Ratiometric Fluorescent Nanothermometer with Reverse Signal Changes for Intracellular Temperature Mapping.

Sensing temperature at the subcellular level is pivotal for gaining essential thermal insights into diverse biological processes. However, achieving sensitive and accurate sensing of the intracellular temperature remains a challenge. Herein, we develop a ratiometric organic fluorescent nanothermometer with reverse signal changes for the ultrasensitive mapping of intracellular temperature. The nanothermometer is fabricated from a binary mixture of saturated fatty acids with a noneutectic composition, a red-emissive aggregation-caused quenching luminogen, and a green-emissive aggregation-induced emission luminogen using a modified nanoprecipitation method. Different from the eutectic mixture with a single phase-transition point, the noneutectic mixture possesses two solid-liquid phase transitions, which not only allows for reversible regulation of the aggregation states of the encapsulated luminogens but also effectively broadens the temperature sensing range (25-48 °C) across the physiological temperature range. Remarkably, the nanothermometer exhibits reverse and sensitive signal changes, demonstrating maximum relative thermal sensitivities of up to 63.66% °C-1 in aqueous systems and 44.01% °C-1 in the intracellular environment, respectively. Taking advantage of these outstanding thermometric performances, the nanothermometer is further employed to intracellularly monitor minute temperature variations upon chemical stimulation. This study provides a powerful tool for the exploration of dynamic cellular thermal activities, holding great promise in unveiling intricate physiological processes.

A universal strategy to enhance photothermal conversion efficiency by regulating the molecular aggregation states for safe photothermal therapy of bacterial infections.

Photothermal therapy (PTT) has emerged as a promising approach for treating bacterial infections. However, achieving a high photothermal conversion efficiency (PCE) of photothermal agents (PTAs) remains a challenge. Such a problem is usually compensated by the use of a high-intensity laser, which inevitably causes tissue damage. Here, we present a universal strategy to enhance PCE by regulating the molecular aggregation states of PTAs within thermoresponsive nanogels. We demonstrate the effectiveness of this approach using aggregation-induced emission (AIE) and aggregation-caused quenching (ACQ) PTAs, showing significant enhancements in PCE without the need for intricate molecular modifications. Notably, the highest PCEs reach up to 80.9% and 64.4% for AIE-NG and ACQ-NG, respectively, which are nearly 2-fold of their self-aggregate counterparts. Moreover, we elucidate the mechanism underlying PCE enhancement, highlighting the role of strong intermolecular π-π interactions facilitated by nanogel-induced volume contraction. Furthermore, we validate the safety and efficacy of this strategy in in vitro and in vivo models of bacterial infections at safe laser power densities, demonstrating its potential for clinical translation. Our findings offer a straightforward, universal, and versatile method to improve PTT outcomes while minimizing cytotoxicity, paving the way for enhanced treatment of bacterial infections with safe PTT protocols.

Bacterial Patterning: A Promising Biofabrication Technique.

Bacterial patterning has emerged as a pivotal biofabrication technique in the biomedical field. In the past 2 decades, a diverse array of bacterial patterning approaches have been developed to enable the precise manipulation of the spatial distribution of bacterial patterns for various applications. Despite the significance of these advancements, there is a deficiency of review articles providing an overview of bacterial patterning technologies. In this mini-review, we systematically summarize the progress of bacterial patterning over the past 2 decades. This review commences with an elucidation of the definition and fundamental principles of bacterial patterning. Subsequently, we introduce the established bacterial patterning strategies, accompanied by discussions about the advantages and limitations of each approach. Furthermore, we showcase the biomedical applications of these strategies, highlighting their efficacy in spatial control of biofilms, biosensing, and biointervention. Finally, this mini-review is concluded with a summary and an outlook on future challenges and opportunities. It is anticipated that this mini-review can serve as a concise guide for those who are interested in this exciting and rapidly evolving research area.

Mechanically and Thermally Stable Cathode Electrolyte Interphase Enables High-temperature, High-voltage Li||LiCoO2 Batteries.

The development of high-energy-density Li||LiCoO2 batteries is severely limited by the instability of cathode electrolyte interphase (CEI) at high voltage and high temperature. Here we propose a mechanically and thermally stable CEI by electrolyte designing for achieving the exceptional performance of Li||LiCoO2 batteries at 4.6 V and 70 °C. 2,4,6-tris(3,4,5-trifluorophenyl)boroxin (TTFPB) as the additive could preferentially enter into the first shell structure of PF6 - solvation and be decomposed on LiCoO2 surface at low oxidation potential to generate a LiBx Oy -rich/LiF-rich CEI. The LiBx Oy surface layer effectively maintained the integrity of CEI and provided excellent mechanical and thermal stability while abundant LiF in CEI further improved the thermal stability and homogeneity of CEI. Such CEI drastically alleviated the crack and regeneration of CEI and irreversible phase transformation of the cathode. As expected, the Li||LiCoO2 batteries with the tailored CEI achieved 91.9 % and 74.0 % capacity retention after 200 and 150 cycles at 4.6 and 4.7 V, respectively. Moreover, such batteries also delivered an unprecedented high-temperature performance with 73.6 % capacity retention after 100 cycles at 70 °C and 4.6 V.

Tailored biomedical materials for wound healing.

Wound healing is a long-term, multi-stage biological process that mainly includes haemostatic, inflammatory, proliferative and tissue remodelling phases. Controlling infection and inflammation and promoting tissue regeneration can contribute well to wound healing. Smart biomaterials offer significant advantages in wound healing because of their ability to control wound healing in time and space. Understanding how biomaterials are designed for different stages of wound healing will facilitate future personalized material tailoring for different wounds, making them beneficial for wound therapy. This review summarizes the design approaches of biomaterials in the field of anti-inflammatory, antimicrobial and tissue regeneration, highlights the advanced precise control achieved by biomaterials in different stages of wound healing and outlines the clinical and practical applications of biomaterials in wound healing.

Reconstituting Low-Density Lipoprotein with NIR-Absorbing Organic Photothermal Agents for Targeted Killing of Cancer Cells.

Photothermal therapy (PTT) systems typically do not possess intrinsic tumor-targeting capability, resulting in indiscriminate thermal damage to both cancer and normal cells. Herein, a low-density lipoprotein (LDL)-based nanosystem (denoted as MTTQ@LDL) is reported for targeted photothermal killing of cancer cells. Such a nanosystem is fabricated by reconstituting the lipophilic core of LDL with an organic photothermal agent MTTQ. The reconstitution process improves the supramolecular photothermal effects of MTTQ assemblies, which contributes to the significantly enhanced photothermal conversion efficiency (41.3% vs. 16.2%). MTTQ@LDL can actively target LDL receptor-overexpressed cancer cells via receptor-mediated endocytosis, enabling the selective killing of cancer cells over normal cells (98% vs. 7%) post-NIR irradiation. Reconstituted LDL can serve as a promising platform for targeted delivery of functional materials, holding great promise in tumor eradication in vivo.

STM studies on porphyrins and phthalocyanines at the liquid/solid interface for molecular-scale electronics.

Porphyrins and phthalocyanines are promising candidates for single-molecule electronics. Among the many characterization tools, scanning tunneling microscopy (STM) represents a very powerful one to gain insight into the electronic properties at the molecular level, by correlating the charge transport behaviours of π-conjugated molecules with ultrahigh resolution imaging. In view of the sophistication of molecular self-assembly in the presence of a solution phase, in this frontier, we focus on STM studies on porphyrins and phthalocyanines at the liquid/solid interface, placing emphasis on the electronic and magnetic properties, as well as the switching behaviour of surface-confined or surface-anchored molecules. Furthermore, we have also addressed the topics of potential that can be exploited in this area.

Activated alkyne-enabled turn-on click bioconjugation with cascade signal amplification for ultrafast and high-throughput antibiotic screening.

Antimicrobial susceptibility testing plays a pivotal role in the discovery of new antibiotics. However, the development of simple, sensitive, and rapid assessment approaches remains challenging. Herein, we report an activated alkyne-based cascade signal amplification strategy for ultrafast and high-throughput antibiotic screening. First of all, a novel water-soluble aggregation-induced emission (AIE) luminogen is synthesized, which contains an activated alkyne group to enable fluorescence turn-on and metal-free click bioconjugation under physiological conditions. Taking advantage of the in-house established method for bacterial lysis, a number of clickable biological substances (i.e., bacterial solutes and debris) are released from the bacterial bodies, which remarkably increases the quantity of analytes. By means of the activated alkyne-mediated turn-on click bioconjugation, the system fluorescence signal is significantly amplified due to the increased labeling sites as well as the AIE effect. Such a cascade signal amplification strategy efficiently improves the detection sensitivity and thus enables ultrafast antimicrobial susceptibility assessment. By integration with a microplate reader, this approach is further applied to high-throughput antibiotic screening.

Constructing Highly Li+ Conductive Electrode Electrolyte Interphases for 4.6 V Li||LiCoO2 Batteries via Electrolyte Additive Engineering.

To improve voltage is considered to effectively address the energy-density question of Li||LiCoO2 batteries. However, it is restricted by the instability of electrode electrolyte interphases in carbonate electrolytes, which mainly originates from Li dendrite growth and structural instability of LiCoO2 at high voltage. Herein, an electrolyte additive strategy is proposed for constructing efficient LiNx Oy -contained cathode electrolyte interphase for 4.6 V LiCoO2 and LiF-rich solid electrolyte interphase for Li anode to enhance the stability of Li||LiCoO2 battery using 4-nitrophthalic anhydride as the additive. As expected, the Li||LiCoO2 battery can stably operate up to 4.6 V, with a high specific capacity of 216.9 mAh g-1 during the 1st cycle and a capacity retention of 167.1 mAh g-1 after 200 cycles at 0.3 C. This work provides an available strategy to realize the application of high-voltage Li||LiCoO2 battery.

Differentiation therapy for murine myelofibrosis model with MLN8237 loaded low-density lipoproteins.

Primary myelofibrosis (PMF) is a severe myeloproliferative neoplasm that is characterized by low-differentiation megakaryoblasts and progressive bone marrow fibrosis. Although an Aurora kinase A (AURKA) targeting small-molecule inhibitor MLN8237 has been approved in clinical trials for differentiation therapy of high-risk PMF patients, its off-target side effects lead to a partial remission and serious complications. Here, we report a dual-targeting therapy agent (rLDL-MLN) with great clinical translation potential for differentiation therapy of PMF disease. In particular, the reconstituted low-density lipoprotein (rLDL) nanocarrier and the loaded MLN8237 can actively target malignant hematopoietic stem/progenitor cells (HSPCs) via LDL receptors and intracellular AURKA, respectively. In contrast to free MLN8237, rLDL-MLN effectively prohibits the proliferation of PMF cell lines and abnormal HSPCs and significantly induces their differentiation, as well as prevents the formation of erythrocyte and megakaryocyte colonies from abnormal HSPCs. Surprisingly, even at a 1500-fold lower dosage (0.01 mg/kg) than that of free MLN8237, rLDL-MLN still exhibits a much more effective therapeutic effect, with the PMF mice almost clear of blast cells. More importantly, rLDL-MLN promotes hematological recovery without any toxic side effects at the effective dosage, holding great promise in the targeted differentiation therapy of PMF patients.

Armor-like Inorganic-rich Cathode Electrolyte Interphase Enabled by the Pentafluorophenylboronic Acid Additive for High-voltage Li||NCM622 Batteries.

Lithium metal batteries (LMBs) comprising Li metal anode and high-voltage nickel-rich cathode could potentially realize high capacity and power density. However, suitable electrolytes to tolerate the oxidation on the cathode at high cut-off voltage are urgently needed. Herein, we present an armor-like inorganic-rich cathode electrolyte interphase (CEI) strategy for exploring oxidation-resistant electrolytes for sustaining 4.8 V Li||LiNi0.6 Co0.2 Mn0.2 O2 (NCM622) batteries with pentafluorophenylboronic acid (PFPBA) as the additive. In such CEI, the armored lithium borate surrounded by CEI up-layer represses the dissolution of inner CEI moieties and also improves the Li+ conductivity of CEI while abundant LiF is distributed over whole CEI to enhance the mechanical stability and Li+ conductivity compared with polymer moieties. With such robust Li+ conductive CEI, the Li||NCM622 battery delivered excellent stability at 4.6 V cut-off voltage with 91.2 % capacity retention after 400 cycles. The excellent cycling performance was also obtained even at 4.8 V cut-off voltage.

Thermoresponsive Hydrogel-Enabled Thermostatic Photothermal Therapy for Enhanced Healing of Bacteria-Infected Wounds.

Photothermal therapy (PTT) has emerged as an attractive technique for the treatment of bacterial infections. However, the uncontrolled heat generation in conventional PTT inevitably causes thermal damages to healthy tissues and/or organs. It is thus essential to develop a smart and universal strategy to regulate the photothermal equilibrium temperature to a preset safe threshold. Herein, a thermoresponsive hydrogel-enabled thermostatic PTT system for enhanced healing of bacteria-infected wounds is reported. In this system, the near-infrared (NIR)-triggered heat generation by photothermal nanomaterials is spontaneously transferred to a thermoresponsive hydrogel with a lower critical solution temperature (LCST), leading to its rapid phase transition by forming considerable light-scattering centers to block NIR penetration. Such a dynamic and reversible process automatically regulates the photothermal equilibrium temperature to the phase-transition point of the LCST-type hydrogel. In contrast to temperature-uncontrolled conventional PTT with severe thermal damages, the thermoresponsive hydrogel-enabled thermostatic PTT provides effective protection on healthy tissues and/or organs, which remarkably accelerates wound healing by efficient bacterial eradication. This study establishes a smart, simple and universal PTT platform, holding great promise in the safe and efficient treatment of bacterial skin infections.

Holdase/Foldase Mimetic Nanochaperone Improves Antibody-Based Cancer Immunotherapy.

Despite unprecedented successes of antibody-based cancer immunotherapy, the serious side effects and rapid clearance following systemic administration remain big challenges to realize its full potential. At the same time, combination immunotherapy using multiple antibodies has shown particularly promising in cancer treatment. It is noticed that the working mechanisms of natural holdase and foldase chaperone are desirable to overcome the limitations of therapeutic antibodies. Holdase chaperone stabilizes unfolded client and prevents it from activation and degradation, while foldase chaperone assists unfolded client to its native state to function. Here a holdase/foldase mimetic nanochaperone (H/F-nChap) to co-delivery two types of monoclonal antibodies (mAbs), αCD16 and αPDL1, and resiquimod (R848) is developed, which significantly improves cancer immunotherapy. The H/F-nChap presents holdase activity in blood and normal tissues that hides and protects mAbs from unnecessary targeted activation and degradation, thereby prolonging blood circulation and reducing immunotoxicity in vivo. Furthermore, H/F-nChap switches to foldase activity in the tumor microenvironment that exposes mAbs and releases R848 to enhance the engagement between NK cells and tumor cells and promote immune activation, respectively. The H/F-nChap represents a strategy for safe and spatiotemporal delivery of multiple mAbs, providing a promising platform for improved cancer immunotherapy.

Highly Oxidation-Resistant Electrolyte for 4.7†V Sodium Metal Batteries Enabled by Anion/Cation Solvation Engineering.

Sodium metal batteries (SMBs) are considered as promising battery system due to abundant Na sources. However, poor compatibility between electrolyte and cathode severely impedes its development. Herein, we proposed an anion/cation solvation strategy for realizing 4.7 V resistant SMBs electrolyte with NaClO4 and trimethoxy(pentafluorophenyl)silane (TPFS) as dual additives (DA). The ClO4 - can rapidly transfer to the cathode surface and strongly coordinate with Na+ to form stable polymer-like chains with solvents. Meanwhile, TPFS can preferentially enter into the PF6 - anion solvation sheath for reducing PF6 -solvent interaction and effectively scavenge adverse electrolyte species for protecting electrode electrolyte interphases. Thus, such electrolyte elevates the oxidative stability of carbonate electrolytes from 3.77 to 4.75 V, and enables Na||Na3 V2 (PO4 )2 O2 F (NVPF) battery with a capacity retention of 93 % and an average Coulombic efficiency (CE) of 99.6 % after 500 cycles at 4.7 V.

A Ratiometric Organic Fluorescent Nanogel Thermometer for Highly Sensitive Temperature Sensing.

Sensing temperature in biological systems is of great importance, as it is constructive to understanding various physiological and pathological processes. However, the realization of highly sensitive temperature sensing with organic fluorescent nanothermometers remains challenging. In this study, we report a ratiometric fluorescent nanogel thermometer and study its application in the determination of bactericidal temperature. The nanogel is composed of a polarity-sensitive aggregation-induced emission luminogen with dual emissions, a thermoresponsive polymer with a phase transition function, and an ionic surface with net positive charges. During temperature-induced phase transition, the nanogel exhibits a reversible and sensitive spectral change between a red-emissive state and a blue-emissive state by responding to the hydrophilic-to-hydrophobic change in the local environment. The correlation between the emission intensity ratio of the two states and the external temperature is delicately established, and the maximum relative thermal sensitivities of the optimal nanogel are determined to be 128.42 and 68.39% °C-1 in water and a simulated physiological environment, respectively. The nanogel is further applied to indicate the bactericidal temperature in both visual and ratiometric ways, holding great promise in the rapid prediction of photothermal antibacterial effects and other temperature-related biological events.

A Smart Photothermal Nanosystem with an Intrinsic Temperature-Control Mechanism for Thermostatic Treatment of Bacterial Infections.

Photothermal therapy (PTT) has attracted extensive attention in disease treatments. However, conventional photothermal systems do not possess a temperature-control mechanism, which poses a serious risk to healthy tissues and/or organs due to inevitable thermal damage. Herein, a smart photothermal nanosystem with an intrinsic temperature-control mechanism for thermostatic treatment of bacterial infections is reported. The smart photothermal nanosystem is constructed by loading a thermochromic material into a hollow-structured silica nanocarrier, in which the thermochromic material is composed of naturally occurring phase-change materials (PCMs), a proton-responsive spirolactone, and a proton source. The resulting nanosystem shows strong near-infrared (NIR) absorption and efficient photothermal conversion in solid PCMs but becomes NIR-transparent when PCMs are melted upon NIR irradiation. Such an attractive feature can precisely regulate the photothermal equilibrium temperature to the melting point of PCMs, regardless of the variation in external experimental parameters. In contrast to conventional PTT with severe thermal damage, the reported smart photothermal nanosystem provides an internal protection mechanism on healthy tissues and/or organs, which remarkably accelerates the recovery of bacteria-infected wounds. The smart photothermal nanosystem is a versatile PTT platform, holding great promise in the safe and efficient treatment of bacterial infections and multimodality synergistic therapy.

Formation of NaF-Rich Solid Electrolyte Interphase on Na Anode through Additive-Induced Anion-Enriched Structure of Na+ Solvation.

High-capacity sodium (Na) anodes suffer from dendrite growth due to the high reactivity, which can be overcome through inducing a stable NaF-rich solid electrolyte interphase (SEI). Herein, we propose an additive strategy for realizing the anion-enriched structure of Na+ solvation to obtain a NaF-rich SEI. The electron-withdrawing acetyl group in 4-acetylpyridine (4-APD) increases the coordination number of PF6 - in the Na+ solvation sheath to facilitate PF6 - to decompose into NaF. Thus, the NaF-rich SEI with high mechanical stability and interfacial energy is formed to repress the growth of Na dendrites. With the 4-APD-contained electrolyte, the symmetric Na||Na cells show excellent cycling performance over 360 h at 1.0 mA cm-2 . Meanwhile, excellent stability is also achieved for Na||Na3 V2 (PO4 )2 O2 F full cells with high Coulombic efficiency (97 %) and capacity retention (91 %) after 200 cycles.

Aggregation-Induced Emission Fluorophore-Incorporated Curcumin-Based Ratiometric Nanoprobe for Hypochlorite Detection in Food Matrices.

The development of efficient, economic, reliable, and accurate monitoring of hypochlorite (ClO-) in food matrices is in great demand for food safety assessment, particularly during its massive use against the COVID-19 epidemic. Here, we prepared an aggregation-induced emission (AIE) fluorophore tetraphenylethylene (TPE)-incorporated curcumin-based hybrid ratiometric fluorescence nanoprobe (Curcumin/TPE@HyNPs) through amphiphilic phospholipid polymer-powered nanoprecipitation, which exhibited a fast, highly sensitive, and selective response to the residual ClO- in real food matrices. Because of the inner filter effect (IFE) from curcumin toward TPE inside the nanoprobe, the bright fluorescence of TPE aggregation at ∼437 nm was effectively quenched, along with an enhanced fluorescence of curcumin at ∼478 nm. Once there was a ClO- residue in food matrices, ClO- triggered the oxidation of o-methoxyphenol inside curcumin and led to the almost complete absorption collapse, thereby terminating curcumin fluorescence at ∼478 nm and the IFE process. Accordingly, the fluorescence of TPE at ∼437 nm was recovered. In this case, a ratiometric fluorescent response of Curcumin/TPE@HyNPs toward the residual ClO- in food matrices (e.g., milk) was proposed with a low detection limit of 0.353 µM and a rapid response time of 140.0 s. Notably, the phospholipid polymer as the protection layer effectively reduced/evaded the nonspecific binding of signal reporters inside the nanoprobe, facilitating it to directly monitor the residual ClO- in real food matrices. This work provided a novel approach to utilize the unconventional AIE luminophors for constructing the efficient and reliable early warning mechanisms toward various food contaminants.

A receptor-targeting AIE photosensitizer for selective bacterial killing and real-time monitoring of photodynamic therapy outcome.

A receptor-targeting AIE photosensitizer (CE-TPA) is synthesized by conjugating cephalothin with a cationic D-A type AIE photosensitizer for selective killing of Gram-positive bacteria over Gram-negative bacteria and normal mammalian cells. By virtue of the strong photosensitization capability, CE-TPA exhibits efficient killing against Gram-positive methicillin-resistant Staphylococcus aureus. More importantly, the photodynamic bactericidal outcome can be conveniently reflected in a real-time fashion by the polarity-sensitive property of CE-TPA.