Evaluation of heavy metal accumulation and tolerance in oxalic acid-treated Phragmites australis wetlands for textile effluent remediation.

Water contamination with metals poses significant environmental challenges. The occurrence of heavy metals (HMs) prompts modifications in plant structures, emphasizing the necessity of employing focused safeguarding measures. Cadmium (Cd), lead (Pb), and chromium (Cr) emerge as particularly menacing toxins due to their high accumulation potential. Increasing the availability of organic acids is crucial for optimizing toxic metal removal via phytoremediation. This constructed wetland system (CWs) was used to determine how oxalic acid (OA) treatments of textile wastewater (WW) effluents affected morpho-physiological characteristics, antioxidant enzyme activity, oxidative stress, and HM concentrations in Phragmites australis. Multiple treatments, comprising the application of OA at a concentration of 10 mM and WW at different dilutions (25%, 50%, 75%, and 100%), were employed, with three replications of each treatment. WW stress decreased chlorophyll and carotenoid content, and concurrently enhanced HMs adsorption and antioxidant enzyme activities. Furthermore, the application of WW was found to elevate oxidative stress levels, whereas the presence of OA concurrently mitigated this oxidative stress. Similarly, WW negatively affected soil-plant analysis development (SPAD) and the total soluble proteins (SP) in both roots and shoots. Conversely, these parameters showed improvement with OA treatments. P. australis showed the potential to enhance HM accumulation under 100% WW stress. Specifically, there is an increase in root SP ranging from 9% to 39%, an increase in shoot SP from 6% to 91%, and an elevation in SPAD values from 4% to 64% compared to their respective treatments lacking OA inclusion. The OA addition resulted in decreased EL contents in the root and shoot by 10%-19% and 13%-15%, MDA by 9%-14% and 9%-20%, and H2O2 by 14%-21% and 9%-17%, in comparison to the respective treatments without OA. Interestingly, the findings further revealed that the augmentation of OA also contributed to an increased accumulation of Cr, Cd, and Pb. Specifically, at 100% WW with OA (10 mM), the concentrations of Cr, Pb, and Cd in leaves rose by 164%, 447%, and 350%, in stems by 213%, 247%, and 219%, and in roots by 155%, 238%, and 195%, respectively. The chelating agent oxalic acid effectively alleviated plant toxicity induced by toxins. Overall, our findings demonstrate the remarkable tolerance of P. australis to elevated concentrations of WW stress, positioning it as an eco-friendly candidate for industrial effluent remediation. This plant exhibits efficacy in restoring contaminants present in textile effluents, and notably, oxalic acid emerges as a promising agent for the phytoextraction of HMs.

HMs stress decreased the physiology and morphology of Phragmites australis L.OA improved the photosynthetic pigments and antioxidant enzymesHMs accumulation and bioavailability increased under OAPhragmites australis L. showed higher efficacy for textile effluent treatment under OA.

Microwave seed priming and ascorbic acid assisted phytoextraction of heavy metals from surgical industry effluents through spinach.

The prevalence of inorganic pollutants in the environment, including heavy metals (HMs), necessitates a sustainable and cost-effective solution to mitigate their impacts on the environment and living organisms. The present research aimed to assess the phytoextraction capability of spinach (Spinach oleracea L.), under the combined effects of ascorbic acid (AA) and microwave (MW) irradiation amendments, cultivated using surgical processing wastewater. In a preliminary study, spinach seeds were exposed to MW radiations at 2.45 GHz for different durations (15, 30, 45, 60, and 90 seconds). Maximum germination was observed after the 30 seconds of radiation exposure. Healthy spinach seeds treated with MW radiations for 30 s were cultivated in the sand for two weeks, after which juvenile plants were transferred to a hydroponic system. Surgical industry wastewater in different concentrations (25 %, 50 %, 75 %, 100 %) and AA (10 mM) were provided to both MW-treated and untreated plants. The results revealed that MW-treatment significantly enhanced the plant growth, biomass, antioxidant enzyme activities and photosynthetic pigments, while untreated plants exhibited increased reactive oxygen species (ROS) and electrolyte leakage (EL) compared with their controls. The addition of AA to both MW-treated and untreated plants improved their antioxidative defense capacity under HMs-induced stress. MW-treated spinach plants, under AA application, demonstrated relatively higher concentrations and accumulation of HMs including lead (Pb), cadmium (Cd) and nickel (Ni). Specifically, MW-treated plants with AA amendment showed a significant increase in Pb concentration by 188 % in leaves, Cd by 98 %, and Ni by 102 % in roots. Additionally, the accumulation of Ni increased by 174 % in leaves, Cd by 168 % in roots, and Pb by 185 % in the stem of spinach plant tissues compared to MW-untreated plants. These findings suggested that combining AA with MW irradiation of seeds could be a beneficial strategy for increasing the phytoextraction of HMs from wastewater and improving overall plant health undergoing HMs stress.

A novel homozygous missense TTC12 variant identified in an infertile Pakistani man with severe oligoasthenoteratozoospermia and primary ciliary dyskinesia.

TTC12 is a cytoplasmic and centromere-localized protein that plays a role in the proper assembly of dynein arm complexes in motile cilia in both respiratory cells and sperm flagella. This finding underscores its significance in cellular motility and function. However, the wide role of TTC12 in human spermatogenesis-associated primary ciliary dyskinesia (PCD) still needs to be elucidated. Whole-exome sequencing (WES) and Sanger sequencing were performed to identify potentially pathogenic variants causing PCD and multiple morphological abnormalities of sperm flagella (MMAF) in an infertile Pakistani man. Diagnostic imaging techniques were used for PCD screening in the patient. Real-time polymerase chain reaction (RT‒PCR) was performed to detect the effect of mutations on the mRNA abundance of the affected genes. Papanicolaou staining and scanning electron microscopy (SEM) were carried out to examine sperm morphology. Transmission electron microscopy (TEM) was performed to examine the ultrastructure of the sperm flagella, and the results were confirmed by immunofluorescence staining. Using WES and Sanger sequencing, a novel homozygous missense variant (c.C1069T; p.Arg357Trp) in TTC12 was identified in a patient from a consanguineous family. A computed tomography scan of the paranasal sinuses confirmed the symptoms of the PCD. RT-PCR showed a decrease in TTC12 mRNA in the patient's sperm sample. Papanicolaou staining, SEM, and TEM analysis revealed a significant change in shape and a disorganized axonemal structure in the sperm flagella of the patient. Immunostaining assays revealed that TTC12 is distributed throughout the flagella and is predominantly concentrated in the midpiece in normal spermatozoa. In contrast, spermatozoa from patient deficient in TTC12 showed minimal staining intensity for TTC12 or DNAH17 (outer dynein arms components). This could lead to MMAF and result in male infertility. This novel TTC12 variant not only illuminates the underlying genetic causes of male infertility but also paves the way for potential treatments targeting these genetic factors. This study represents a significant advancement in understanding the genetic basis of PCD-related infertility.

Fluid-responsive tunable metasurfaces for high-fidelity optical wireless communication.

Optical wireless communication (OWC), with its blazing data transfer speed and unparalleled security, is a futuristic technology for wireless connectivity. Despite the significant advancements in OWC, the realization of tunable devices for on-demand and versatile connectivity still needs to be explored. This presents a considerable limitation in utilizing adaptive technologies to improve signal directivity and optimize data transfer. This study proposes a unique platform that utilizes tunable, fluid-responsive multifunctional metasurfaces offering dynamic and unprecedented control over electromagnetic wave manipulation to enhance the performance of OWC networks. We have achieved real-time, on-demand beam steering with vary-focusing capability by integrating the fabricated metasurfaces with different isotropic fluids. Furthermore, the designed metasurfaces are capable of polarization-based switching of the diffracted light beams to enhance overall productivity. Our research has showcased the potential of fluid-responsive tunable metasurfaces in revolutionizing OWC networks by significantly improving transmission reliability and signal quality through real-time adjustments. The proposed methodology is verified by designing and fabricating an all-dielectric metasurface measuring 500 µm × 500 µm and experimentally investigating its fluid-responsive vary-focal capability. By incorporating fluid-responsive properties into spin-decoupled metasurfaces, we aim to develop advanced high-tech optical devices and systems to simplify beam-steering and improve performance, adaptability, and functionality, making the devices suitable for various practical applications.

Treatment Planning Strategies for Interstitial Ultrasound Ablation of Prostate Cancer.

PURPOSE: To develop patient-specific 3D models using Finite-Difference Time-Domain (FDTD) simulations and pre-treatment planning tools for the selective thermal ablation of prostate cancer with interstitial ultrasound. This involves the integration with a FDA 510(k) cleared catheter-based ultrasound interstitial applicators and delivery system. METHODS: A 3D generalized "prostate" model was developed to generate temperature and thermal dose profiles for different applicator operating parameters and anticipated perfusion ranges. A priori planning, based upon these pre-calculated lethal thermal dose and iso-temperature clouds, was devised for iterative device selection and positioning. Full 3D patient-specific anatomic modeling of actual placement of single or multiple applicators to conformally ablate target regions can be applied, with optional integrated pilot-point temperature-based feedback control and urethral/rectum cooling. These numerical models were verified against previously reported ex-vivo experimental results obtained in soft tissues. RESULTS: For generic prostate tissue, 360 treatment schemes were simulated based on the number of transducers (1-4), applied power (8-20 W/cm2), heating time (5, 7.5, 10 min), and blood perfusion (0, 2.5, 5 kg/m3/s) using forward treatment modelling. Selectable ablation zones ranged from 0.8-3.0 cm and 0.8-5.3 cm in radial and axial directions, respectively. 3D patient-specific thermal treatment modeling for 12 Cases of T2/T3 prostate disease demonstrate applicability of workflow and technique for focal, quadrant and hemi-gland ablation. A temperature threshold (e.g., Tthres = 52 °C) at the treatment margin, emulating placement of invasive temperature sensing, can be applied for pilot-point feedback control to improve conformality of thermal ablation. Also, binary power control (e.g., Treg = 45 °C) can be applied which will regulate the applied power level to maintain the surrounding temperature to a safe limit or maximum threshold until the set heating time. CONCLUSIONS: Prostate-specific simulations of interstitial ultrasound applicators were used to generate a library of thermal-dose distributions to visually optimize and set applicator positioning and directivity during a priori treatment planning pre-procedure. Anatomic 3D forward treatment planning in patient-specific models, along with optional temperature-based feedback control, demonstrated single and multi-applicator implant strategies to effectively ablate focal disease while affording protection of normal tissues.

A novel missense mutation of CCDC34 causes male infertility with oligoasthenoteratozoospermia in a consanguineous Pakistani family.

ABSTRACT: Male infertility is a worldwide health issue, affecting 8%-12% of the global population. Oligoasthenoteratozoospermia (OAT) represents a severe type of male infertility, characterized by reduced sperm count and motility and an increased frequency of sperm with aberrant morphology. Using whole-exome sequencing, this study identified a novel missense mutation (c.848C>A, p.A283E) in the coiled-coil domain-containing 34 gene (CCDC34) in a consanguineous Pakistani family. This rare mutation was predicted to be deleterious and to affect the protein stability. Hematoxylin and eosin staining of spermatozoa from the patient with OAT revealed multiple morphological abnormalities of the flagella and transmission electron microscopy indicated axonemal ultrastructural defects with a lack of outer dynein arms. These findings indicated that CCDC34 plays a role in maintaining the axonemal ultrastructure and the assembly or stability of the outer dynein arms, thus expanding the phenotypic spectrum of CCDC34 missense mutations.

Role of Functional Groups in Tuning Luminescence Signature of Solution-Processed Graphene Quantum Dots: Experimental and Theoretical Insights.

Zero-dimensional graphene quantum dots (GQDs) present unique optoelectronic properties in the large-spectrum range from UV to visible. However, the origin of luminescence in GQDs is still a debatable question. Therefore, the present work investigates the features of trap-mediated and edge-state-functionalized group-associated luminescence enhancement of GQDs. The attached functional groups' involvement in the upsurge of photoluminescence has been discussed theoretically as well as experimentally. In addition, the role of the aromatic ring, the functional group attached, and their positions of attachment to the aromatic ring to tune the emission wavelength and Raman modes have been elucidated theoretically as well as experimentally. We found that in the case of the -OH group attached outside of the aromatic ring, the long-range π hybridization dominates, which suggests that the emission from this model can be dictated by long-range π hybridization. In particular, we found that oxygen-containing functional groups attached outside of the aromatic ring are the main source of the luminescence signature in GQDs. Furthermore, density functional theory (DFT) indicates that the -OH functional group attached outside of the aromatic ring perfectly matched with our experimental results, as the experimental bandgap (2.407 eV) is comparable with the theoretical simulated bandgap (2.399 eV) of the -OH group attached outside of the aromatic ring.

Investigation of mechanical and thermal behavior of fiber-reinforced silica xerogel composites.

Silica aerogels or xerogels are renowned dried gels with low density, high surface area, higher porosity, and better thermal stability which makes it suitable for aerospace, light weight structures, thermal insulation, and hydrophobic coatings. But brittle behaviour, low mechanical strength, and high manufacturing cost restrict its usage. Recently, the addition of various fibres like glass or carbon fiber is one of the best reinforcement methods to minimize the brittle behaviour. Supercritical drying technique usually used to develop aerogel that is expensive and difficult to produce in bulk quantities. Higher cost obstacle can be tackled by applying ambient pressure drying technique to develop xerogel. But researcher observed cracks in samples prepared through the ambient pressure drying technique is still a major shortcoming. The aim of this study is to systematically analyze the influence of silica gel fiber reinforcement on silica xerogels, encompassing morphology, mechanics, thermal behaviour, compression test, and thermogravimetric characteristics. The research used a low-cost precursor named Tetraethyl orthosilicate to synthesize low-cost composite Silica xerogel and glass and carbon fiber added to provide strength and flexibility to the overall composite. Silica gel works as binder in strengthening the xerogel network. The investigation employs scanning electron microscopy (SEM) to examine the morphology of the composites, Fourier Transform Infrared (FTIR) analysis to affirm hydrophobic characteristics, compression tests to assess mechanical strength, and thermogravimetric tests to study weight loss under different conditions. SEM results reveals that glass fibers exhibit lower adhesion to the xerogel network compared to carbon fibers. FTIR analysis confirms the hydrophobicity of the composite silica xerogel. Compression tests showed that, under a 48% strain rate, the carbon fiber composite demonstrates superior compressive stress endurance. Thermogravimetric tests revealed a 1% lower weight loss for the carbon fiber composite compared to the glass fiber composite. This work concludes that glass and carbon fiber together with silica gel particles successfully facilitated in developing flexible, less costly, hydrophobic, and crack-free silica xerogel composites by APD. These advancements have the potential to drive innovations in material science and technology across diverse industries.

Treatment of marble industry wastewater by Brassica napus (L.) under oxalic acid amendment: efficacy as fodder and carcinogenic risk assessment.

In the present study, Brassica napus, a food plant, was grown for phytoextraction of selected heavy metals (HMs) from marble industry wastewater (WW) under oxalic acid (OA) amendment. The hydroponic experiment was performed under different combination of WW with OA in complete randomized design. Photosynthetic pigments and growth reduction were observed in plants treated with WW alone amendments. The combination of OA in combination with WW significantly enhanced the growth of plants along with antioxidant enzyme activities compared with WW-treated-only plants. HM stress alone enhanced the hydrogen peroxide, electrolyte leakage, and malondialdehyde contents in plants. OA-treated plants were observed with enhanced accumulation of cadmium (Cd), copper (Cu), and lead (Pb) concentrations in the roots and shoots of B. napus. The maximum concentration and accumulation of Cd in root, stem, and leaves was increased by 25%, 30%, and 30%; Cu by 42%, 24%, and 17%; and Pb by 45%, 24%, and 43%, respectively, under OA amendment. Average daily intake and hazard quotient (HQ) were calculated for males, females, and children in two phases of treatments in phytoremediation of metals before and after accumulation into B. napus leaves and stems. HQ of metals in the leaves and stem was < 1 before metal accumulation, whereas > 1 was observed after HM accumulation for all males, females, and children. Similarly, the hazard index of the three study types was found > 1. It was observed that the estimated excess lifetime cancer risk was of grade VII (very high risk), not within the accepted range of 1 × 10-4 to 1 × 10-6. Based on the present study, the increased levels of HMs up to carcinogenicity was observed in the B. napus which is not safe to be consumed later as food.

Displacement-pressure biparametrically regulated softness sensory system for intraocular pressure monitoring.

High intraocular pressure (IOP) is one of the high-risk pathogenic factors of glaucoma. Existing methods of IOP measurement are based on the direct interaction with the cornea. Commercial ophthalmic tonometers based on snapshot measurements are expensive, bulky, and their operation requires trained personnel. Theranostic contact lenses are easy to use, but they may block vision and cause infection. Here, we report a sensory system for IOP assessment that uses a soft indentor with two asymmetrically deployed iontronic flexible pressure sensors to interact with the eyelid-eyeball in an eye-closed situation. Inspired by human fingertip assessment of softness, the sensory system extracts displacement-pressure information for soft evaluation, achieving high accuracy IOP monitoring (>96%). We further design and custom-make a portable and wearable ophthalmic tonometer based on the sensory system and demonstrate its high efficacy in IOP screening. This sensory system paves a way towards cost-effective, robust, and reliable IOP monitoring.

Emerging trends and challenges in polysaccharide derived materials for wound care applications: A review.

Polysaccharides are favourable and promising biopolymers for wound care applications due to their abundant natural availability, low cost and excellent biocompatibility. They possess different functional groups, such as carboxylic, hydroxyl and amino, and can easily be modified to obtain the desirable properties and various forms. This review systematically analyses the recent progress in polysaccharides derived materials for wound care applications, emphasizing the most commonly used cellulose, chitosan, alginate, starch, dextran and hyaluronic acid derived materials. The distinctive attributes of each polysaccharide derived wound care material are discussed in detail, along with their different forms, i.e., films, membranes, sponges, nanoemulsions, nanofibers, scaffolds, nanocomposites and hydrogels. The processing methods to develop polysaccharides derived wound care materials are also summarized. In the end, challenges related to polysaccharides derived materials in wound care management are listed, and suggestions are given to expand their utilization in the future to compete with conventional wound healing materials.

High Entropy Alloys Enable Durable and Efficient Lithium-Mediated CO2 Redox Reactions.

Designing electrocatalysts with high activity and durability for multistep reduction and oxidation reactions is challenging. High-entropy alloys (HEAs) are intriguing due to their tunable geometric and electronic structure through entropy effects. However, understanding the origin of their exceptional performance and identifying active centers is hindered by the diverse microenvironment in HEAs. Herein, NiFeCoCuRu HEAs designed with an average diameter of 2.17 nm, featuring different adsorption capacities for various reactants and intermediates in Li-mediated CO2 redox reactions, are introduced. The electronegativity-dependent nature of NiFeCoCuRu HEAs induces significant charge redistribution, shifting the d-band center closer to Fermi level and forming highly active clusters of Ru, Co, and Ni for Li-based compounds adsorptions. This lowers energy barriers and simultaneously stabilizes *LiCO2 and LiCO3+CO intermediates, enhancing the efficiency of both CO2 reduction and Li2CO3 decomposition over extended periods. This work provides insights into specific active site interactions with intermediates, highlighting the potential of HEAs as promising catalysts for intricate CO2 redox reactions.

A numerical approach to optimize the performance of HTL-free carbon electrode-based perovskite solar cells using organic ETLs.

Carbon electrode-based perovskite solar cells (c-PSCs) without a hole transport layer (HTL) have obtained a significant interest owing to their cost-effective, stable, and simplified structure. However, their application is limited by low efficiency and the prevalence of high-temperature processed electron transport layer (ETL), e.g. TiO2, which also has poor optoelectronic properties, including low conductivity and mobility. In this study, a series of organic materials, namely PCBM ((Park et al., 2023; Park et al., 2023) [6,6]-phenyl-C61-butyric acid methyl ester, C72H14O2), Alq3 (Al(C9H6NO)3), BCP (2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline, C26H20N2), C60, ICBA (indene-C60 bisadduct, C78H16) and PEIE (poly (ethylenimine) ethoxylated, (C37H24O6N2)n) have been numerically analyzed in SCAPS-1D solar simulator to explore alternative potential ETL materials for HTL-free c-PSCs. The presented device has FTO/ETL/CH3NH3PbI3/carbon structure, and its performance is optimized based on significant design parameters. The highest achieved PCEs for PCBM, Alq3, BCP, C60, ICBA, and PEIE-based devices are 22.85%, 19.08%, 20.99%, 25.51%, 23.91%, and 22.53%, respectively. These PCEs are obtained for optimum absorber thickness for each case, with an acceptor concentration of 1.0 × 1017 cm-3 and defect density of 2.5 × 1013 cm-3. The C60-based cell has been found to outperform with device parameters as Voc of 1.29 V, Jsc of 23.76 mA/cm2, and FF of 82.67%. As the design lacks stability when only organic materials are employed, each of the presented devices have been analyzed by applying BiI3, LiF, and ZnO as protective layers with the performances not compromised. We believe that our obtained results will be of great interest in developing stable and efficient HTL-free c-PSCs.

Exploring relationship of poor sleeping habits with prenatal stress among pregnant women in Pakistan: a cross-sectional study.

OBJECTIVE: Pregnancy is a complex phenomenon accompanied by biological, physiological and psychosocial changes for a mother. It is also regarded as a stressful life event where a woman's role, identity and interpersonal relationships are restructured. The present study from Pakistan explores the association of sleep quality and poor sleeping habits with prenatal stress using Pittsburgh Sleep quality Index. RESULTS: There were a total of 516 women (mean age = 29.82 years), with more than half reporting poor sleep quality. Ethnically, a majority (395, 76.6%) were natives of the Punjab province while rest were non-natives. A high percentage of respondents reported poor subjective sleep quality (22.1%), sleep latency (44.1%), habitual sleep efficiency (27.5%), sleep disturbance (30.1%), use of medications (7.1%) and daytime dysfunction (29.5%). According to logistic regression analysis, respondents with poor sleep quality were 2.24 (95% CI = 1.55-3.22, P < 0.001) times more likely to have high stress levels (P < 0.001).

An integrated network pharmacology approach to discover therapeutic mechanisms of Commiphora wightii for the treatment of Bell's palsy.

Bell's palsy (BP) can result in facial paralysis. Inflammation or injury to the cranial nerves that regulate the facial muscles is primarily responsible for that disease. Commiphora wightii remains recognized as a cure for a few human ailments. This study focused on therapeutic phenomena of C. wightii for the treatment of Bell's palsy, utilizing the network drug discovery and molecular docking techniques. Active biological constituents of C. wightii were retrieved from literature and independent databases. Potential therapeutic targets (431) of 13 bioactive phytochemicals were fetched via SwissTargetPrediction tool. Putative intersecting targets (855) of Bell's palsy were computed through the DisGeNET and GeneCards datasets. Subsequently, by the analysis of potential shared targets (87) of C. wightii and Bell's palsy, a Venn diagram was drawn. DAVID database was used to evaluate gene functional annotations and enriched pathways that are involved in Bell's palsy. STRING database was used for generating the protein-protein relationship complex. Visual presentations of the interactions of potential targets to active chemical constituents were done by the Cytoscape. Whereas, the conformational research sorted out 10 key targets through the protein-protein interactions network. Moreover, the capacity of therapeutic ingredients to interact with a target inhibiting Bell's palsy was confirmed by molecular docking, which might ratify the findings of network pharmacology. In the molecular complex of AKT1-cholesterol, a 100-ns simulation unveiled a graceful stability, with a minimal 0.167 Å ligand shift and resilient hydrogen bonds (ASN54 and SER205). The final 20 ns showcased a P1 motif pirouette, gracefully forming aromatic bonds with H165 and W186, underscoring the complex's dynamic finesse. This study evaluated compound-target interactions and their impact on disease-related genes. It revealed that five genes (AKT1, TNF, MAPK3, EGFR and SRC) of C. wightii might be useful therapeutic targets for the treatment of Bell's palsy, as well as helping in lowering down the blood pressure.Communicated by Ramaswamy H. Sarma.

Effects of different extenders, storage temperatures, and antioxidant supplementation on chilled semen quality: a review.

The successful preservation of ram semen is essential to promote genetic variability, ensure semen transportation, and inseminate multiple ewes. Currently, either animal or plant-based lipoprotein-based extenders are used for semen preservation. Animal product-based extenders include milk and egg yolk, while soybean lecithin is a plant-based extender. Although extenders containing products of animal origin better preserve the quality of chilled semen, the in vivo efficacy after 24 h of storage is still of great concern. Storage temperature is another important and effective factor in preserving sperm quality, whereby different storage temperatures are adopted to enhance the storage life of sperm. Low temperatures (4-5 °C) better preserve sperm quality for a longer duration than high temperatures (15, 20, and 25 °C). Moreover, antioxidant supplementation has a positive impact on sperm quality during liquid storage. The current review summarizes the outcomes of various extenders, different storage temperatures, and antioxidant supplementation on the liquid storage of ram sperm.

Frequency and types of pre-analytical errors in a clinical laboratory of a specialized healthcare hospital.

Background & Objective: The pre-analytical phase, encompassing all preparatory steps leading to the analytical process, represents a critical stage prone to laboratory errors. An assessment of the occurrence and categories of laboratory errors, specifically within the pre-analytical phase of laboratory procedures, can guide in taking timely actions for rectifying errors responsible for damage and loss of samples. This study aimed to assess the frequency and types of pre-analytical errors within a clinical laboratory at the Multan Institute of Kidney Diseases over two years. Methods: This research took place at the Multan Institute of Kidney Diseases. Data was extracted from the hospital laboratory records of the period from 1st January 2021 to 31st December 2022. After data compilation, a retrospective cross-sectional methodology was adopted to assess frequency and types of pre-analytical errors within a clinical laboratory. The records underwent a thorough examination to identify pre-analytical errors, which were classified according to their type and occurrence rate. Results: Among the 254810 specimens received during the data collection period, a total of 1,722 specimens (0.67% of all collected samples) were found unsuitable for further processing. Amongst the rejected specimens, 718 (41.6%) displayed indications of hemolysis, 388 (22.5%) exhibited clotting, 217 (12.6%) had an insufficient volume and the remaining specimens fell into other miscellaneous categories such as insufficient quantity, unlabeled samples etc. Conclusion: The overall percentage of sample rejections in the laboratory was 0.67%. This study provided valuable insights into various reasons, and causes that require improvements to enhance the efficiency and quality of laboratory processes.

A novel homozygous TSGA10 missense variant causes acephalic spermatozoa syndrome in a Pakistani family.

BACKGROUND: Acephalic spermatozoa syndrome is a rare type of teratozoospermia causing male infertility due to detachment of the sperm head and flagellum, which precludes fertilization potential. Although loss-of-function variations in several genes, including TSGA10, have been associated with acephalic spermatozoa syndrome, the genetic cause of many cases remains unclear. RESULTS: We recruited a Pakistani family with two infertile brothers who suffered from acephalic spermatozoa syndrome. Through whole-exome sequencing (WES) followed by Sanger sequencing, we identified a novel missense variant in TSGA10 (c.1112T > C, p. Leu371Pro), which recessively co-segregated with the acephalic spermatozoa syndrome within this family. Ultrastructural analyses of spermatozoa from the patient revealed that 98% of flagellar cross-sections displayed abnormal axonemal ultrastructure, in addition to the head-flagellum detachment. Real-time quantitative PCR analysis revealed almost no detectable TSAG10 mRNA and western blot analysis also failed to detect TSAG10 protein in patient's sperm samples while TSGA10 expression was clearly detected in control samples. Consistently, immunofluorescence analysis demonstrated the presence of TSGA10 signal in the midpiece of sperm from the control but a complete absence of TSGA10 signal in sperm from the patient. CONCLUSION: Altogether, our study identifies a novel TSGA10 pathogenic variant as a cause of acephalic spermatozoa syndrome in this family and provides information regarding the clinical manifestations associated with TSGA10 variants in human.

RéSUMé: CONTEXTE: Le syndrome des spermatozoïdes acéphaliques est un type rare de tératozoospermie provoquant une infertilité masculine en raison du détachement de la tête et du flagelle des spermatozoïdes, ce qui exclut une potentielle fécondation. Bien que des variations de perte de fonction dans plusieurs gènes, y compris TSGA10, aient été associées au syndrome des spermatozoïdes acéphaliques, la cause génétique de nombreux cas reste incertaine. RéSULTATS: Nous avons recruté une famille pakistanaise avec deux frères infertiles qui souffraient du syndrome des spermatozoïdes acéphaliques. Grâce au séquençage de l'exome entier (WES) suivi du séquençage Sanger, nous avons identifié un nouveau variant faux-sens dans TSGA10 (c.1112T > C, p. Leu371Pro), qui co-ségréguait de manière récessive avec le syndrome des spermatozoïdes acéphaliques au sein de cette famille. Les analyses ultrastructurales des spermatozoïdes des patients ont révélé que 98% des coupes transversales flagellaires présentaient une ultrastructure axonémiques anormales, en plus du décollement tête-flagelle. L'analyse quantitative par PCR en temps réel n'a révélé presque aucun ARNm TSAG10 détectable; l'analyse par transfert Western n'a pas non plus réussi à détecter la protéine TSAG10 dans les échantillons de sperme des patients, tandis que l'expression de TSGA10 a été clairement détectée dans les échantillons du témoin. De manière cohérente, l'analyse par immunofluorescence a démontré la présence du signal TSGA10 dans la partie médiane des spermatozoïdes du témoin, mais une absence totale de signal TSGA10 chez ceux des patients. CONCLUSION: Dans l'ensemble, notre étude identifie un nouveau variant pathogène de TSGA10 comme cause du syndrome des spermatozoïdes acéphaliques dans cette famille et fournit des informations concernant les manifestations cliniques associées aux variants de TSGA10 chez l'homme. MOTS-CLéS: Infertilité, TSGA10, Spermatozoïdes acéphaliques, Variations faux-sens.

Synthesis of anti-depressant molecules via metal-catalyzed reactions: a review.

Depression is one of the most mutilating conditions in the world today. It has been difficult to make advancements toward better, more effective therapies since the introduction of antidepressant medicines in the late 1950s. One important field of medicinal chemistry is the synthesis of antidepressant molecules through metal-catalyzed procedures. The important role that different transition metals, including iron, nickel, ruthenium, and others, serve as catalysts in the synthesis of antidepressants is examined in this review. Key structural motifs included in antidepressant drugs such as tricyclic antidepressants (TCAs), selective serotonin reuptake inhibitors (SSRIs), and others can be synthesized in a variety of effective ways using metal-catalyzed steps. This review examines current developments in the catalytic synthesis of antidepressants and their potential application over the previous thirteen years.