Aspartic protease supplementation enhancing the performance, carcass characteristics, nutrient digestibility and economic viability, without changing blood parameters and salivary cortisol of pigs.

Aiming to study the performance, carcass characteristics, nutrient digestibility, blood parameters, salivary cortisol levels, and economic viability of pigs administered aspartic protease, a total of 135 pigs were housed in pens in a randomized block design, divided into five treatments with nine replications. The experimental diets were positive control (PC), basic diet with a 5.0% reduction in protein and amino acid requirements; negative control (NC) with a 7.5% reduction in protein and amino acid requirements; NC + 100 g/mT of aspartic protease (NC100); NC + 150 g/mT of aspartic protease (NC150); and NC + 200 g/mT of neutral serine protease (NC200). The inclusion of protease, independently of the source and amount, increased the average daily weight gain (P < 0.05) of animals compared with the control treatments (PC and NC), improved feed conversion (P < 0.05) in early stages, and improved diet digestibility (P < 0.05) compared with the PC. Treatment with NC150 and NC200 resulted in greater carcass weights (P < 0.05) than treatment with the PC. NC100 led to a greater carcass yield than PC (P < 0.05), and NC150 resulted in a greater loin eye area than PC (P < 0.05). No differences (P > 0.05) in the blood parameters or salivary cortisol levels were found. Regarding economic viability, proteases increased the profitability, with NC150 leading to the best results. Thus, the use of aspartic proteases is recommended to improve performance and further facilitate pork production.

Biogenic Synthesis of Copper Nanoparticles: A Systematic Review of Their Features and Main Applications.

Nanotechnology is an innovative field of study that has made significant progress due to its potential versatility and wide range of applications, precisely because of the development of metal nanoparticles such as copper. Nanoparticles are bodies composed of a nanometric cluster of atoms (1-100 nm). Biogenic alternatives have replaced their chemical synthesis due to their environmental friendliness, dependability, sustainability, and low energy demand. This ecofriendly option has medical, pharmaceutical, food, and agricultural applications. When compared to their chemical counterparts, using biological agents, such as micro-organisms and plant extracts, as reducing and stabilizing agents has shown viability and acceptance. Therefore, it is a feasible alternative for rapid synthesis and scaling-up processes. Several research articles on the biogenic synthesis of copper nanoparticles have been published over the past decade. Still, none provided an organized, comprehensive overview of their properties and potential applications. Thus, this systematic review aims to assess research articles published over the past decade regarding the antioxidant, antitumor, antimicrobial, dye removal, and catalytic activities of biogenically synthesized copper nanoparticles using the scientific methodology of big data analytics. Plant extract and micro-organisms (bacteria and fungi) are addressed as biological agents. We intend to assist the scientific community in comprehending and locating helpful information for future research or application development.

Fine resolution analysis of bacterial communities associated with Neochloris oleoabundans culture and insights into terpenes as contamination control agents.

Biological contamination is one of the main bottlenecks in microalgae production, reducing quality and productivity and sometimes leading to the complete loss of the cultures. Selecting terpenes can be a pathway toward eco-friendly contamination control in microalgae cultures. This work evaluated the presence of bacterial contaminants in N. oleoabundans cultures through HTS and 16 S analysis and their susceptibility to six natural terpenes (α-pinene, ß-pinene, limonene, trans-cinnamaldehyde, linalool, and eugenol). The principal phyla identified were Proteobacteria, Bacteroidetes, and Actinobacteria, and based on these data, 89 bacterial isolates of seven genera were obtained (36 Aureimonas sp., 27 Microbacterium sp., 5 Pseudomonas sp., 9 Bacillus sp., 14 Shinella sp., 1 Brevundimonas sp., and 1 Exiguobacterium sp.) at 25ºC in the presence of light. It was possible to observe that Beta-pinene 50 mg L- 1 only inhibited Bacillus sp. In contrast, Alpha-pinene, Linalool, and Trans-cinnamaldehyde, at a concentration of 6.25 mg L- 1 efficiently inhibited most isolates. The inhibition percentages found were 79-99%.

Polyhydroxybutyrate production by Cupriavidus necator in a corn biorefinery concept.

The high costs of bioplastics' production may hinder their commercialization. Development of new processes with high yields and in biorefineries can enhance diffusion of these materials. This work evaluated the production of polyhydroxybutyrate (PHB) from the combination of milled corn starchy fraction hydrolysate and crude glycerol as substrates by the strain Cupriavidus necator LPB 1421. After optimization steps, maximum accumulation of 62 % of PHB was obtained, which represents 11.64 g.L-1 and productivity of 0.162 g.Lh-1. In a stirred tank bioreactor system with 8 L of operational volume, 70 % of PHB accumulation was reported, representing 14.17 g.L-1 of the biopolymer with 0.197 g.Lh-1 productivity. PHB recovery was conducted using a chemical digestion method, reaching >99 % purity. Therefore, the potential application of milled corn as substrate for PHB production was confirmed. The developed bioplastic process could be coupled to a bioethanol producing unit creating the opportunity of a sustainable and economic biorefinery.

Agro-industrial wastewater in a circular economy: Characteristics, impacts and applications for bioenergy and biochemicals.

The generation of agroindustrial byproducts is rising fast worldwide. The slaughter of animals, the production of bioethanol, and the processing of oil palm, cassava, and milk are industrial activities that, in 2019, generated huge amounts of wastewaters, around 2448, 1650, 256, 85, and 0.143 billion liters, respectively. Thus, it is urgent to reduce the environmental impact of these effluents through new integrated processes applying biorefinery and circular economy concepts to produce energy or new products. This review provides the characteristics of some of the most important agro-industrial wastes, including their physicochemical composition, worldwide average production, and possible environmental impacts. In addition, some alternatives for reusing these materials are addressed, focusing mainly on energy savings and the possibilities of generating value-added products. Finally, this review considers recent research and technological innovations and perspectives for the future.

Global cocoa fermentation microbiome: revealing new taxa and microbial functions by next generation sequencing technologies.

This review provides an overview of the application of next-generation sequencing (NGS) technologies for microbiome analysis of cocoa beans fermentation. The cocoa-producing regions where NGS has been applied include Brazil, Ghana, Ivory Coast, Cameroon, Nicaragua, and Colombia. The data collected were processed by principal component analysis (PCA) and Venn diagrams to perform a multivariate association between microbial diversity and cocoa-producing regions. NGS studies have confirmed the dominance of three major microbial groups revealed by culture-dependent approaches, i.e., lactic acid bacteria, acetic acid bacteria, and yeasts. However, a more complex microbial diversity has been revealed, comprising sub-dominant populations, late-growing species, and uncultivable microorganisms. A total of 99 microbial genera and species were for the first time reported in cocoa beans fermentation, such as Brevibacillus sp., Halomonas meridiana, Methylobacterium sp., Novosphingobium sp., and Paenibacillus pabuli. PCA and Venn diagrams showed that species composition is rarely fixed and often experiences fluctuations of varying degrees and at varying frequencies between different cocoa-producing regions. Understanding these differences will provide further directions for exploring the functional and metabolic activity of rare and abundant taxa, as well as their use as starter cultures to obtain high-quality cocoa beans.

In vitro cytotoxic effect of a chitin-like polysaccharide produced by Mortierella alpina on adrenocortical carcinoma cells H295R, and its use as mitotane adjuvant.

This study presents an in vitro evaluation of the antitumor potential of a chitin-like exopolysaccharide (EPS, produced by Mortierella alpina) on Adrenocortical carcinoma cells (ACC) compared to mitotane, a commercial drug commonly used in ACC treatment, and known for its side effects. Techniques of cellular viability determination such as MTT and fluorescence were used to measure the cytotoxic effects of the EPS and mitotane in tumoral cells (H295R) and non-tumoral cells (VERO), observing high cytotoxicity of mitotane and a 10% superior pro-apoptotic effect of the EPS compared to mitotane (p < 0.05). The cytotoxic effect of the EPS was similar to the effect of 50 µM mitotane on tumoral cells (p < 0.05). A decrement of the lysosomal volume was also noted in tumoral cells treated with the EPS. To enhance the antitumor effect, a combination of mitotane at a lower dosage and the EPS (as adjuvant) was also tested, showing a slight improvement of the cytotoxicity effect on tumoral cells. Therefore, the results indicate a cytotoxic effect of the EPS produced by Mortierella alpina on adrenocortical carcinoma, and a possible application in biomedical formulations or additional treatments.

Rice vinasse treatment by immobilized Synechococcus pevalekii and its effect on Dunaliella salina cultivation.

The development of new strategies in microalgal studies represents an outstanding opportunity to mitigate environmental problems coupled with biomass production at a reduced cost. Here we present a combined bioprocess for the treatment of rice vinasse using immobilized cyanobacteria Synechococcus pevalekii in alginate beads followed by the use of the treated vinasse as a culture medium for Dunaliella salina biomass production. Cyanobacterial-alginate beads showed a chlorophyll a production of 0.68 × 10-3 mg bead-1 and a total carotenoid production of 0.64 × 10-3 mg bead-1. The first step showed a decrease in nitrate (91%), total solids (29%), and ions. Addition of treated vinasse into D. salina cultivation resulted in a significant increase in cell replication of about 175% (optimized cultivation). The use of natural seawater drastically reduced the medium cost to US$4.75 per m3 and the addition of treated vinasse has the potential to reduce it even more (up to 69%). This study not only provides an insight on the use of cyanobacteria for rice vinasse treatment but also demonstrates a promising lower-cost medium for marine microalgal biomass production with biotechnological purposes.

Citric acid bioproduction and downstream processing: Status, opportunities, and challenges.

Citric acid (CA) has been widely used in different industrial sectors, being produced through fermentation of low-cost feedstock. The development of downstream processes, easier to operate, environmentally friendly, and more economic than precipitation, is certainly a challenge in CA bioproduction. Large volumes of by-products generated in precipitation require treatment before disposal. Adsorption, extraction, and membrane separation have been shown to have a lower environmental impact than precipitation, but the technological maturity of these methods is still limited. However, reactive extraction and adsorption have great potential for industrial applications. This review shows that there is still much to be explored, both about the factors that are intrinsic to the techniques, but also in their combination for new processes' development. This review reports the most recent advances on CA bioproduction, with significant information about recovery and purification methods involving this highly industrially demanded organic acid.

Hydrogen production by dark fermentation using a new low-cost culture medium composed of corn steep liquor and cassava processing water: Process optimization and scale-up.

The use of effluents for hydrogen production through dark fermentation is promising because it results in the generation of value-added products and reduction of the effluent's organic load. A low-cost medium using agroindustrial effluents, corn steep liquor (CSL) and cassava processing wastewater (CPW) was evaluated for hydrogen production with microbial consortia (Vir and Gal). Four variables were evaluated for their impact on biohydrogen production through a Plackett Burman design. Subsequently, the significant variables were optimized using a central composite design, resulting in two mathematical models with regression coefficients R2 > 0.92. The maximum yields were validated and resulted in 107 and 83.1 mL of biohydrogen/g COD removed for Vir and Gal, respectively. The lower medium cost for biohydrogen production was 81.5 USD/m3, approximately 80% more economical than some supplemented media. Finally, the scale-up of the biohydrogen production by consortia to 5L resulted in an increase of more than 40%.

Production, characterization, and biological activity of a chitin-like EPS produced by Mortierella alpina under submerged fermentation.

The production of a chitin-like exopolysaccharide (EPS) was optimized through experimental design methods, evaluating the influence of urea, phosphate, and glucose. Under optimized conditions, up to 1.51 g/L was produced and its physicochemical characteristics were evaluated by chromatography, NMR, and FTIR spectroscopy, and rheological techniques. The results showed a homogeneous EPS (Mw 4.9 × 105 g mol-1) composed of chitin, linear polymer of ß-(1→4)-linked N-acetyl-d-glucosamine residues. The acetylation degree as determined by 13C CP-MAS NMR spectroscopy was over 90 %. The EPS biological activities, such as antioxidant effect and antitumor properties, were evaluated. To the best of our knowledge, this is the first study on the production of a new alternative of extracellular chitin-like polysaccharide with promising bioactive properties from the filamentous fungus M. alpina.

Biological hydrogen production from palm oil mill effluent (POME) by anaerobic consortia and Clostridium beijerinckii.

Palm oil mill effluent (POME) was tested as a substrate to produce hydrogen by dark fermentation. Two microbial consortia and a pure culture of Clostridium beijerinckii (ATCC 8260) were cultured anaerobically in raw, diluted and hydrolyzed POME to compare biohydrogen production yields in all three media. Experiments were done in 15 mL Hungate tubes containing 5 mL of medium and 1 mL of inoculum. When Clostridium beijerinckii was cultivated at 30 °C in the hydrolyzed POME (P003), containing 7.5 g/L of sucrose, during 8 days of fermentation and 20 % of the inoculum, the maximum biohydrogen production yield was 4.62 LH2/Lmed. Consortium C3 also showed the best production in hydrolyzed POME while consortium C6 achieved its maximum production in raw POME. This effluent is a potential substrate for biohydrogen production.

Efeitos da terapia combinada na adiposidade localizada: estudo experimental / Effects of combined therapy in located adiposity: experimental study

Introdução: As associações de Terapias Combinadas de Ultrassom e Eletroterapia (TCUE) no mercado nacional podem ser utilizadas através de diferentes equipamentos. Na prática clínica tem-se relatado que o uso das TCUE tem eficácia no tratamento da adiposidade localizada. Objetivo: Avaliar os efeitos da terapia combinada (TCUE) no tratamento da adiposidade localizada. Métodos: Trata-se de um estudo experimental, composto por uma amostra de 15 coelhos, de ambos os sexos, da espécie Oryctolagus Cuniculus, divididos aleatoriamente em três grupos: G1- grupo TCUE-M que utilizou efeitos do ultrassom com aplicação de correntes estereodinâmicas (n = 5); G2- grupo TCUE -H que utilizou uma combinação de ultrassom e corrente Aussie (n = 5) e G3- controle (n = 5) nenhuma terapia. Resultados: As análises dos resultados revelaram pequenas alterações na camada adiposa na maioria dos coelhos integrantes dos grupos tratados. Conclusão: A análise das lâminas histológicas apresentou irregularidades na membrana celular adiposa mostrando diferentes tamanhos de células. (AU)

Introduction: Associations of Combined Ultrasound Therapy and Electrotherapy (TCUE) can be used in the domestic market through different equipment. Some authors report that the use of TCUE has efficacy in the treatment of localized adiposity. Objective: To evaluate the effects of combined therapy (TCUE) in the treatment of localized adiposity. Methods: This is an experimental study consisting of a sample of 15 rabbits of both sexes of the species Oryctolagus Cuniculus, randomly divided into three groups: G1- TCUE-M group that used ultrasound effects with the application of stereodynamic currents (n = 5); G2-TCUE-H group that used a combination of ultrasound and current Aussie (n = 5) and G3-control (n = 5) no therapy. Results: Analyzes of the results revealed small alterations in the adipose layer in most of the rabbits in the treated groups. Conclusion: Analysis of the histological slides presented irregularities in the adipose cell membrane showing different cell sizes. (AU)

Second-generation itaconic acid: An alternative product for biorefineries?

The ability to produce second-generation itaconic acid by Aspergillus terreus, and the inhibitory effects of hydrolysis by-products on the fermentation were evaluated by cultivation in a synthetic medium containing components usually present in a real hydrolysate broth from lignocellulosic biomasses. The results showed that A. terreus NRRL 1960 can produce itaconic acid and consume xylose completely, but the conversion is less than the fermentation using only glucose. In addition, compared to fermentation of glucose, or even xylose, the mix of both sugars resulted in a lower itaconic acid yield. In the inhibitory test, the final itaconic acid titer was reduced by acetic acid, furfural, and 5-hydroxymethylfurfural concentrations of, respectively, 188, 175, and 700 mg L-1. However, the presence of any amount of acetic acid proved to be detrimental to itaconic acid production. This research sheds some light on doubts about the biorefinery implementation of itaconic acid production.

Biohydrogen production in cassava processing wastewater using microbial consortia: Process optimization and kinetic analysis of the microbial community.

Biohydrogen production was evaluated using cassava processing wastewater (CPW) and two microbial consortia (Vir and Gal) from different Brazilian environments. The biohydrogen production was optimized using a Box-Behnken design (T, pH, C/N, and % v/v inoculum). Maximum yields were obtained with hydrolyzed substrate: 4.12 and 3.80 mol H2 / for Vir and Gal, respectively. Similarly, the kinetic parameters µ, k, and q were higher with hydrolyzed CPW in both consortia. The molecular analysis of the consortia through Illumina high-throughput sequencing showed the presence of bacteria from the families Porphyromonadaceae, Clostridiaceae, Ruminococcaceae, and Enterococcaceae. The relative abundance of microbial families varies as fermentation progresses. In both consortia, Clostridiaceae reached the maximum relative abundance in the media between 16 and 24 h, interval in which approximately 90% of the biohydrogen is generated.

A comparative study of extraction techniques for maximum recovery of bioactive compounds from Ganoderma lucidum spores / Estudio comparativo de técnicas de extracción para la máxima recuperación de compuestos bioactivos a partir esporas de Ganoderma lucidum

SUMMARY This study aimed at evaluating effective methods for breaking the hard and insoluble spores of Ganoderma lucidum to recover functional biomolecules. Rupture techniques were evaluated such as manual maceration (RM), maceration with spheres of various materials (BR), and microwave exposure plus maceration with steel/ chrome spheres (MBR1). Spore rupture was evaluated using UV-Vis spectroscopy, which showed vibrations of 2955, 1642, 1240, 1080 and 1746 cm-1 corresponding to changes in spore walls. The MBR1 extract contained the largest amounts of carbohydrates (19.80 mg.g-1 spores) and polyphenols (2.21 mg.g-1 spores), whereas the BR extract had higher antioxidant activity (57.22%Inb DPPH). The MBR1 and BR extracts contained 62.2 and 73.5% glucose, respectively. Both methods also involved significant extraction of carbohydrates and proteins. The best way to extract biomolecules from spore walls is to perform a microwave heat treatment and break the walls with steel/chrome spheres; this produces large quantities of carbohydrates with antioxidant properties.

RESUMEN El objetivo de este estudio fue evaluar varios métodos de ruptura de las esporas de Ganoderma lucidum y extraer sus propiedades bioactivas. Para este propósito se evaluaron diferentes técnicas de rompimiento como: la maceración manual (RM), la maceración con esferas de diversos materiales (BR) y la exposición a microondas junto la maceración de las esporas con esferas de acero/cromo (MBR1). La ruptura de las esporas fue evaluada por espectroscopia UV-Vis, la cual mostró que las vibraciones 2955, 1642, 1240, 1080 y 1746 cm-1 correspondieron a cambios estructurales en las paredes de las esporas. El extracto MBR1 presento el mayor contenido de carbohidratos (19,80 mg.g-1) y polifenoles (2,21 mg.g-1), mientras que el extracto BR tuvo una mayor actividad antioxidante (57,22% Inb DPPH). Los extractos MBR1 y BR también presentaron en el análisis de monosacáridos un 62,2 y 73,5% de contenido glucosa. Como conclusión la mejor metodología para extraer biomoléculas de las paredes de las esporas de G. lucidum fueron el tratamiento térmico con microondas y la ruptura de las paredes con esferas de acero/cromo, porque este proceso permitió la extracción de una mayor cantidad de carbohidratos con posibles propiedades antioxidantes.

Biological contamination and its chemical control in microalgal mass cultures.

Microalgae are versatile sources of bioproducts, a solution for many environmental problems. However, and despite its importance, one of the main problems in large-scale cultures-the presence of contaminants-is rarely systematically approached. Contamination, or the presence of undesirable organisms in a culture, is deleterious for the culture and frequently leads to culture crashes. To avoid contamination, closed systems can be used; however, for very large-scale open systems, contamination is unavoidable and remediation procedures are necessary-ranging from physicochemical treatment to addition of biocidal substances. In all cases, early detection and culture monitoring are paramount. This article describes the biological contaminants, contamination mechanisms, and control systems used in open and closed cultures, discussing the latest advances and techniques in the area. It also discusses the complex interactions of algae with other microorganisms that can be expected in cultivation systems.

In Vitro Probiotic Properties and DNA Protection Activity of Yeast and Lactic Acid Bacteria Isolated from A Honey-Based Kefir Beverage.

The probiotic characteristics of three acid-tolerant microbial strains, viz., Lactobacillus satsumensis LPBF1, Leuconostoc mesenteroides LPBF2 and Saccharomyes cerevisiae LPBF3, isolated from a honey-based kefir functional beverage, were studied following the requirements established by the Food and Agriculture Organization of the United Nation/World Health Organization (FAO/WHO), including host-associated stress resistance, epithelium adhesion ability, and antimicrobial activity. The three microbial strains tolerated different pH values (2.0, 3.0, 4.0 and 7.0) and bile salt concentrations (0.3% and 0.6%), and survive in the presence of simulated gastric juice, which are conditions imposed by the gastrointestinal tract. In addition, they showed high percentages of hydrophobicity, auto aggregation and anti-pathogenic against Escherichia coli and Staphylococcus aureus, with no hemolytic activity. The protective capacity of human DNA through microbial treatment was investigated by single-cell gel electrophoresis (SCGE) comet assay. The three selected strains showed DNA protection effect against damage caused by hydroxyl radical (H2O2). However, when the S. cerevisiae treatment was applied, the most effective DNA protection index was observed, which can be associated to its high production of extracellular antioxidants as reveled by the 2,2-diphenyl-1-picryl-hydrazylhydrate (DPPH) method. These results indicated that the three selected microbial strains could be useful for preventing oxidative DNA damage and cellular oxidation in food products. As well-adapted microbial cells, the selected strains can be used for production of non-dairy functional beverages, especially for vegans and/or vegetarians and lactose intolerants.

Microalgal biorefineries: Integrated use of liquid and gaseous effluents from bioethanol industry for efficient biomass production.

A new method for CO2 recovery was proposed for cultivation of different microalgae. First, a chemical fixation, where CO2 was injected in alkalinized vinasse to form (bi)carbonate salts, was performed. In addition, biological fixation with CO2-enriched air injection was also accomplished for evaluation of the most promising results. Two bioreactor systems, a stirred-tank reactor and a bubble column reactor, were employed. A higher carbon transfer rate (43.35 g.L-1.h-1) was achieved in the bubble column reactor using NaOH-alkalinized vinasse, along with reductions of the chemical oxygen demand (COD), biological oxygen demand (BOD) and turbidity (TD). This allowed the cultivation of microalgae and cyanobacteria at vinasse concentrations between 70 and 100%, reaching a biomass production of 2.25 g.L-1 in 15 days of culture. The viability of chemical CO2 fixation together with the use of 100% treated vinasse from a bioethanol production unit for microalgae cultivation has been demonstrated in a successfully integrated biorefinery approach.