Atomically dispersed ternary FeCoNb active sites anchored on N-doped honeycomb-like mesoporous carbon for highly catalytic degradation of 4-nitrophenol.

In the last decades, 4-nitrophenol is regarded as one of highly toxic organic pollutants in industrial wastewater, which attracts great concern to earth sustainability. Herein, atomically dispersed ternary FeCoNb active sites were incorporated into nitrogen-doped honeycomb-like mesoporous carbon (termed FeCoNb/NHC) by a two-step pyrolysis strategy, whose morphology, structure and size were characterized by a set of techniques. Further, the catalytic activity and reusability of the as-prepared FeCoNb/NHC were rigorously examined by using 4-NP catalytic hydrogenation as a proof-of-concept model. The influence of the secondary pyrolysis temperature on the catalytic performance was investigated, combined by illuminating the catalytic mechanism. The resultant catalyst exhibited significantly enhanced catalytic features with a normalized rate constant (kapp) of 1.2 × 104 min-1g-1 and superior stability, surpassing the home-made catalysts in the control groups and earlier research. This study provides some constructive insights for preparation of high-efficiency and cost-effectiveness single-atom nanocatalysts in organic pollutants environmental remediation.

Multiplicative rGO/Cu-BDC MOF for 4-nitrophenol reduction and supercapacitor applications.

Two-dimensional nanosheets, with their distinct characteristics, are widely used in various applications such as water splitting, supercapacitors, catalysis etc. In this research, we produced Cu-BDC MOF nanosheets by using Cu2O nanotubes for metal ions and H2BDC as the organic linker. We combined these Cu-BDC MOF nanosheets with reduced graphene oxide (rGO) to form a nanocomposite. The collaboration between Cu-BDC MOF and rGO boosts both the catalytic reduction of 4-nitrophenol and the electrochemical capabilities. The conversion of 4-nitrophenol to 4-aminophenol is achieved using sodium borohydride as both a reducing agent and a catalyst. The study explores the impact of different concentrations of 4-nitrophenol and sodium borohydride on catalytic efficiency. The increase in sodium borohydride concentration enhances catalytic efficiency by providing more BH4- ions and electrons for the reduction process. The catalytic reduction process adheres to the Langmuir-Hinshelwood mechanism with apparent pseudo-first-order kinetics. Specifically, Cu-BDC MOF and rGO/Cu-BDC MOF exhibit specific capacities of 468.4 mA h/g and 656.4 mA h/g at a current density of 2 A/g, respectively, while also enhancing the operating voltage window. Therefore, electrodes based on rGO/Cu-BDC MOF nanosheets present a novel approach for environmental remediation and energy storage applications across various fields.

4-Nitrophenol at environmentally relevant concentrations mediates reproductive toxicity in Caenorhabditis elegans via metabolic disorders-induced estrogen signaling pathway.

4-Nitrophenol (4-NP), as a toxic and refractory pollutant, has generated significant concern due to its adverse effects. However, the potential toxic effects and mechanism remained unclear. In this study, the reproduction, development, locomotion and reactive oxygen species (ROS) production of Caenorhabditis elegans were investigated to evaluate the 4-NP toxicity. We used metabolomics to assess the potential damage mechanisms. The role of metabolites in mediating the relationship between 4-NP and phenotypes was examined by correlation and mediation analysis. 4-NP (8 ng/L and 8 µg/L) caused significant reduction of brood size, ovulation rate, total germ cells numbers, head thrashes and body bends, and an increase in ROS. However, the oosperm numbers in uterus, body length and body width were decreased in 8 µg/L. Moreover, 36 differential metabolites were enriched in the significant metabolic pathways, including lysine biosynthesis, ß-alanine metabolism, tryptophan metabolism, pentose phosphate pathway, pentose and glucuronate interconversions, amino sugar and nucleotide sugar metabolism, starch and sucrose metabolism, galactose metabolism, propanoate metabolism, glycerolipid metabolism, and estrogen signaling pathway. The mechanism of 4-NP toxicity was that oxidative stress caused by the perturbation of amino acid, which had effects on energy metabolism through disturbing carbohydrate and lipid metabolism, and finally affected the estrogen signaling pathway to exert toxic effects. Moreover, correlation and mediation analysis showed glycerol-3P, glucosamine-6P, glucosamine-1P, UDP-galactose, L-aspartic acid, and uracil were potential markers for the reproduction and glucose-1,6P2 for developmental toxicity. The results provided insight into the pathways involved in the toxic effects caused by 4-NP and developed potential biomarkers to evaluate 4-NP toxicity.

Green Synthesis of New Derivatives of Iminothiazole Using Cefixime and Removing Organic Pollutants from Aqueous Environment by Employing Cu@KF/Clinoptilolite NPs.

AIMS AND OBJECTIVE: In this research, multicomponent reactions of cefixime, isothiocyanates, and alkyl bromides were carried out for the synthesis of new iminothiazole derivatives with high yields in water as the solvent at room temperature in the presence of catalytic amounts of Cu@KF/CP NPs as catalysts. Also, the ability of Cu@KF/Clinoptilolite nanoparticles (NPs) to adsorb and remove 4-NP and cefixime from water was investigated. The Cu@KF/Clinoptilolite nanoparticles were synthesized by employing a water extract of Petasites hybridus rhizomes. MATERIALS AND METHODS: For this experiment, all of the components obtained from Fluka and Merck were subjected to further purification. The antibiotic used in this investigation, cefixime, was obtained from a pharmaceutical facility situated in Sari, Mazandaran, Iran. The antibiotic factory is located in Sari City, Iran. All solutions were prepared using distilled water. The shape of Cu@KF/CP nanoparticles was analyzed using images obtained from a Holland Philips XL30 scanning electron microscope. An analysis was performed on the crystalline structure of Cu@KF/CP nanoparticles (NPs), and a room temperature X-ray diffraction (XRD) examination was carried out utilizing a Holland Philips Xpert X-ray powder diffractometer. The X-ray diffraction (XRD) examination was conducted using CuK radiation, which has a wavelength of 0.15406 nm. The analysis covered a 2ε angle range from 20 to 80°. The nanostructures that were produced were chemically analyzed using X-ray energy dispersive spectroscopy (EDS) with an S3700N equipment. The morphology and dimensions of Cu@KF/CP nanoparticles were characterized using a Philips EM208 transmission electron microscope operated at an acceleration voltage of 90 kV. RESULTS: The primary objective of this study was to develop a sustainable approach for producing new iminothiazole derivatives 4. This was achieved using a highly efficient three-component reaction combining cefixime 1, isothiocyanates 2, and alkyl bromides 3. The reaction was carried out in water at ambient temperature, using Cu@KF/CP NPs as a highly effective catalyst, leading to excellent yields. Moreover, the study findings showed that the synthesized compounds demonstrated a significant antioxidant activity compared to conventional antioxidants. The antibacterial efficacy of the synthesized compounds was evaluated against both Gram-positive and Gram-negative bacteria. Furthermore, Cu@KF/CP nanoparticles were utilized to adsorb CFX and 4-NP from water-based solutions. CONCLUSION: This study showcases the effective synthesis of innovative iminothiazole derivatives through the use of multicomponent reactions, involving the combination of cefixime, isothiocyanates, and alkyl bromides. The reactions were conducted in a water-based solvent. The reactions were carried out at room temperature, utilizing Cu@KF/CP NPs as catalysts. The Cu@KF/CP nanoparticles, a newly developed heterogeneous nanocatalyst, were synthesized and evaluated utilizing X-ray diffraction (XRD), fieldemission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) research techniques. Cu@KF/CP nanoparticles are utilized to adsorb CFX and 4-NP from water-based solutions. The objects were manufactured using a straightforward and uncomplicated approach. The BET surface area of Cu@KF/CP NPs was measured to be 201.8 m2/g. The experimental equilibrium data was evaluated by applying the isotherms of the Langmuir, Freundlich, Dubinin-Radushkevich, and Redlich-Peterson models. Additionally, we examined the catalytic efficiency of Cu@KF/CP nanoparticles (NPs) in reducing various colors in water.

Immobilization of silver-loaded graphene oxide (Ag-GO) on canvas fabric support for catalytic conversion of 4 nitrophenol.

Due to the rising human population and industrialization, harmful chemical compounds such as 4-nitrophenol (4-NP) and various dyes are increasingly released into the environment, resulting in water pollution. It is essential to convert these harmful chemicals into harmless compounds to mitigate this pollution. This research focuses on synthesizing a novel heterogeneous catalyst using modified canvas fabric (CF) decorated with silver metal nanoparticles on graphene oxide nanosheets (Ag-GO/CF). The process involves coating the fabrics (CF) with graphene oxide (GO) nanosheets through sonication. Subsequently, silver nanoparticles are deposited in situ and reduced on the GO surface, resulting in the formation of the Ag-GO/CF composite. Various physicochemical characterizations were conducted to examine the interfacial interactions between CF, GO, and Ag nanoparticles. The catalytic activity of the nanocomposite was assessed by hydrogenating 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of sodium borohydride (NaBH4). The results showed that the 10%Ag-5%GO/CF with a surface of 6 cm2 (3 × 2 cm) exhibited the highest catalytic activity, achieving a reduction efficiency of over 96% in 5 min. The 4-NP reduction reaction rate was well-fitted with a pseudo-first-order kinetics model with an apparent reaction rate constant (Kapp) of 0.676 min-1. Furthermore, the Ag-GO/CF composite demonstrated remarkable stability over successive cycles, with no noticeable decrease in its catalytic activity, suggesting its promising application for long-term chemical catalytic processes. This synthesized composite can be easily added to and removed from the reaction solution while maintaining high catalytic performance in the reduction of 4-NP, and it could be beneficial in avoiding problems related to powder separation.

Highly Efficient Electrospun Silver Decorated Graphene Oxide Nanocomposites on Poly(vinylidene fluoride) (PVDF@GO-Ag) Hybrid Membrane for Reduction of 4-Nitrophenol.

Graphene oxide-silver poly(vinylidene fluoride) membranes (PVDF@GO-Ag) were successfully synthesized by the electrospinning method, which exhibited a high catalytic activity using the hydrogenation of 4-nitrophenol (4-NP) as a model reaction in a batch reaction study. The hybrid membranes doped with 1 wt% GO and 2 wt% Ag (PVDF-1-2) exhibited the most desired performance for the catalytic reduction of 4-NP. Importantly, PVDF-1-2 exhibited excellent cycling stability in 10 catalytic cycle tests and was highly amenable to separation. This property effectively addresses the significant challenges associated with the practical application of nanocatalysts. Furthermore, density-functional theory (DFT) calculations have demonstrated that the GO-Ag nanocomposites exhibit the strongest adsorption capacity for 4-NP- when a specific ratio of GO and Ag is achieved, accompanied by the loading of Ag nanoclusters onto GO. Additionally, the study demonstrated that an increase in temperature significantly accelerated the reaction rate, in line with the van't Hoff rule. This study provides an effective and environmentally friendly solution for the treatment of 4-NP in wastewater.

Controllable Assemblies of Au NPs/P5A for Enhanced Catalytic Reduction of 4-Nitrophenol.

Efficient catalytic reduction of 4-nitrophenol (4-NP) is one focus of industry and practical engineering, because 4-NP is one of the most important sources of pollution of the ecological environment and human health. Here, coassembled hybrid composites of pillar[5]arene (P5A) and gold nanoparticles (Au NPs) were successfully developed by a one-step synthetic method as a type of water-insoluble catalyst for the reduction of 4-NP. The geometric and topological structures, as well as physiochemical properties of Au NPs/P5A composite catalyst, were fully characterized and analyzed through various tests such as transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), indicating that Au NPs were well dispersed on the surface of the two-dimensional film of assembled P5A. The influence factors of the catalytic reduction of 4-NP were further investigated and discussed, confirming that the content of Au NPs and the concentration of 4-NP were very significant during the catalysis. The catalytic reaction was carried out at the catalyst concentration of 100 mg·L-1 and an initial 4-NP concentration of 90 mg·L-1 under 30 °C. The calculated reaction rate constant was 0.3959 min-1 and the reduction rate of 4-NP was more than 95% in 20 min. In addition, the as-prepared catalyst can maintain a high catalytic efficiency after five cycles. Thus, the easily recyclable composite catalyst with poor aqueous solution can exhibit prospective application to the treatment of 4-NP in water.

Enhanced detection of 4-nitrophenol in drinking water: ECL sensor utilizing velvet-like graphitic carbon nitride and molecular imprinting.

In this work, a molecularly imprinted electrochemiluminescence (ECL) sensor was developed for selective detection of 4-nitrophenol (4-NP) in drinking water for the first time. By synthesizing velvet-like graphitic carbon nitride (V-g-C3N4) via one-step thermal polycondensation and integrating it with a molecularly imprinted polymer (MIP), the ECL sensor was fabricated. The MIP-modified V-g-C3N4 composites (MIP/V-g-C3N4) were synthesized using a sol-gel method with 4-NP as the template molecule. Under optimal conditions, the ECL sensor exhibited a wide detection range (5 × 10-10-1 × 10-5 mol/L) and a low detection limit (1.8 × 10-10 mol/L). In testing with actual drinking water samples, it displayed high accuracy (recoveries for intraday and inter-day: 93.50-106.2% and 97.00-107.3%, separately) and precision (RSDs for intraday and inter-day: 1.54-4.59% and 1.53-4.28%, respectively). The developed MIP-based ECL sensor demonstrated excellent selectivity, stability, and reproducibility, offering a promising and reliable approach for highly sensitive and selective determination of 4-NP in drinking water.

A multifunctional sensor for detecting tetracycline, 4-nitrophenol, and pesticides.

In recent years, due to the abuse of antibiotics, nitro explosives and pesticides, which have caused great harm to the environment and human health, social concerns have prompted researchers to develop more sensitive detection platforms for these pollutants. In this paper, a novel two-dimensional Zn (II) coordination polymer, [Zn(L)0.5(1,2-bimb)]·DMF (1), [H4L=[1,1':4',1''-terphenyl]-2, 2'',4, 4'' -tetracarboxylic acid, 1,2-bimb = 1,2-bis(imidazol-1-ylmethyl)benzene] was synthesized using a hydro-solvothermal method. Among commonly used organic solvents, 1 exhibits significant stability. Fast and efficient fluorescence response can be achieved for tetracycline (TET), 4-nitrophenol (4-NP), fluazinam (FLU), and abamectin benzoate (AMB) with low detection limits. A binary intelligent logic gate device with FLU and AMB as chemical input signals is successfully constructed, which provides a new idea for biochemical detection. In addition, a portable visual test paper has been prepared, which has high sensitivity, good selectivity, and simple operation. It can be used for rapid detection of pollutants in daily life and has broad application prospects. Finally, a detailed discussion was conducted on the fluorescence sensing mechanism of 1 for detecting TET, 4-NP, AMB and FLU.

A bifunctional MoS2/SGCN nanocatalyst for the electrochemical detection and degradation of hazardous 4-nitrophenol.

Herein, we reported the dual functions of molybdenum disulfide/sulfur-doped graphitic carbon nitride (MoS2/SGCN) composite as a sensing material for electrochemical detection of 4-NP and a catalyst for 4-NP degradation. The MoS2 nanosheet, sulfur-doped graphitic carbon nitride (SGCN) and MoS2/SGCN were characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) spectroscopy and X-ray photoelectron spectroscopy (XPS). Electrochemical characterization of these materials with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) in 1 mM K4[Fe(CN)6]3-/4- show that the composite has the lowest charge transfer resistance and the best electrocatalytic activity. The limit of detection (LOD) and the linear range of 4-nitrophenol at MoS2/SGCN modified glassy carbon electrode (MoS2/SGCN/GCE) were computed as 12.8 nM and 0.1 - 2.6 µM, respectively. Also, the percentage recoveries of 4-NP in spiked tap water samples ranged from 97.8 - 99.1 %. The electroanalysis of 4-NP in the presence of notable interferons shows that the proposed electrochemical sensor features outstanding selectivity toward 4-NP. Additionally, the results of the catalytic degradation of 4-NP at MoS2/SGCN show that the nanocatalyst catalyzed the transformation of 4-NP to 4-aminophenol (4-AP) with a first-order rate constant (k) estimated to be 4.2 ×10-2 s-1. The results of this study confirm that the MoS2/SGCN nanocatalyst is a useful implement for electroanalytical monitoring and catalytic degradation of the hazardous 4-NP in water samples.

Green synthesis of novel Zn0.5Ni0.5FeCrO4 spinel magnetic nanoparticles: Photodegradation of 4-nitrophenol and aniline under visible light irradiation.

This study explores novel nanoparticles used in environmental remediation of 4-nitrophenol and aniline from wastewater bodies. The Zn0.5Ni0.5FeCrO4 magnetic nanoparticles (MNPs) were synthesized using tragacanth gel as a green, low-cost, and easy sol-gel method. The MNPs were characterized by XRD, XPS, FT-IR, VSM, TEM, EDX, FESEM, BET, DRS, and elemental mapping. The analysis demonstrated that nanoparticles have a spinel cubic structure, spatial distribution of the elements, ferromagnetic activity, narrow bandgap, and uniform morphology. Furthermore, effectiveness of the developed MNPs to degrade recalcitrant organic pollutants such as 4-nitrophenol (4-NP) and aniline under visible light exposure were studied. The results indicated 95% aniline and 80% of 4-NP were successfully degraded in 180 and 150 min, respectively. The total organic carbon (TOC) analysis revealed 65% and 54% removal of aniline and 4-NP. LC-MS was employed to elucidate the photodegradation mechanism and to identify the degradation products, including small fragmented molecules.

In situ construction of covalent-organic framework on hydrogen-bond organic framework: Fluorescence detection and removal of 4-nitrophenol and metamitron in aqueous media.

A multifunctional COF@HOF (ETTA-DFP@TCBP-HOF) composite is prepared by adding red-fluorescent ETTA-DFP COF to the blue-fluorescent TCBP-HOF preparation system through molecular hydrogen bonding or π - π stacking interactions in situ one-pot synthesis. ETTA-DFP@TCBP-HOF is a multifunctional material for the quantitative detection and simultaneous adsorption of 4-nitrophenol (4-NP) and metamitron (MET) in aqueous solution. As a dual-emission fluorescent sensor, the ETTA-DFP@TCBP-HOF has both fluorescence of TCBP-HOF at 474 nm and ETTA-DFP COF at 592 nm, which shows a ratiometric response to 4-NP and MET with high selectivity, good sensitivity, good anti-interference performance and fast response. As a adsorbent, ETTA-DFP@TCBP-HOF displays rapid adsorption kinetics, and acceptable adsorption capacity for 4-NP and MET. In conclusion, this work constructs a novel multifunctional hybrid material with dual-emission center of HOF and COF, which can not only be used as a ratiometric fluorescent probe for detection, but also for removal of hazardous pollutants, suggesting a new strategy for environmental remediation and human health.

Microwave-assisted synthesis of ZnS@CuInxSy for photocatalytic degradation of coloured and non-coloured pollutants.

Copper indium sulfide (CuInS2) exhibits strong visible light absorption and thus has the potential for good photocatalytic activity; however, rapid charge recombination limits its practical usage. An intriguing strategy to overcome this issue is to couple CuInS2 with another semiconductor to form a heterojunction, which can improve the charge carrier separation and, hence, enhance the photocatalytic activity. In this study, photocatalysts comprising CuInS2 with a secondary CuS phase (termed CuInxSy) and CuInxSy loaded with ZnS (termed ZnS@CuInxSy) were synthesized via a microwave-assisted method. Structural and morphological characterization revealed that the ZnS@CuInxSy photocatalyst comprised tetragonal CuInS2 containing a secondary phase of hexagonal CuS, coupled with hexagonal ZnS. The effective band gap energy of CuInxSy was widened from 2.23 to 2.71 as the ZnS loading increased from 0 to 30%. The coupling of CuInxSy with ZnS leads to long-lived charge carriers and efficient visible-light harvesting properties, which in turn lead to a remarkably high activity for the photocatalytic degradation of brilliant green (95.6% in 5 h) and conversion of 4-nitrophenol to 4-nitrophenolate ions (95.4% in 5 h). The active species involved in these photocatalytic processes were evaluated using suitable trapping agents. Based on the obtained results, photocatalytic mechanisms are proposed that emphasize the importance of h+, O2•-, and OH- in photocatalytic processes using ZnS@CuInxSy.

Ultrasound-electrochemistry assisted liquid-phase co-exfoliation of phosphorene decorated by Au-Ag bimetallic nanoparticles as nanozyme for smartphone-based portable sensing of 4-nitrophenol.

The stability of black phosphorene (BP) and its preparation and modification for developing and applying devices have become a hot topic in the interdisciplinary field. We propose ultrasound-electrochemistry co-assisted liquid-phase exfoliation as an eco-friendly one-step method to prepare gold-silver bimetallic nanoparticles (Au-AgNPs)-decorated BP nanozyme for smartphone-based portable sensing of 4-nitrophenol (4-NP) in different water sources. The structure, morphology, composition, and properties of Au-AgNPs-BP nanozyme are characterized by multiple instrumental analyses. Bimetallic salts are induced to efficiently occupy oxidative sites of BP to form highly stable Au-AgNPs-BP nanozyme and guarantee the integrity of the lamellar BP. The electrochemistry shortens the exfoliation time of the BP nanosheet and contributes to the loading efficiency of bimetallic nanoparticles on the BP nanosheet. Au-AgNPs-BP-modified screen-printed carbon electrode coupled with palm-sized smartphone-controlled wireless electrochemical analyzer as a portable wireless intelligent sensing platform was applied to the determination of 4-NP in a linear range of 0.6-10 µM with a limit of detection of 63 nM. It enables on-site determination of 4-NP content in lake water, river water, and irrigation ditch water. This work will provide a reference for an eco-friendly one-step preparation of bimetallic nanoparticle-decorated graphene-like materials as nanozymes and their smartphone-based portable sensing application outdoors.

Microwave-assisted synthesis of Ni-doped europium hydroxide for photocatalytic degradation of 4-nitrophenol.

Microwave-assisted synthesis method was used to prepare europium hydroxide (Eu(OH)3) and different percentages of 1, 5, and 10 % nickel-doped Eu(OH)3 (Ni-Eu(OH)3) nanorods (NRs). X-ray diffraction study showed a hexagonal phase with an average crystallite size in the range of 21 - 35 nm for Eu(OH)3 and Ni-Eu(OH)3 NRs. FT-IR and Raman studies also confirmed the synthesis of Eu(OH)3 and Ni-Eu(OH)3. The synthesized materials showed rod-like morphology with an average length and diameter between 27 - 50 nm and 8 - 13 nm, respectively. The band gap energies of Ni-Eu(OH)3 NRs were reduced (4.06 - 3.50 eV), which indicates that the doping of Ni2+ ions has influenced the band gap energy of Eu(OH)3. The PL study exhibited PL quenching with Ni doping. The photocatalytic degradation of 4-nitrophenol (4-NP) by the synthesized materials under UV light irradiation was investigated, in which 10 % Ni-Eu(OH)3 NRs showed the best response. A kinetic study was also conducted which shows pseudo-first-order kinetics. Based on this, Ni-Eu(OH)3 NRs have shown a potential to be a UV-light active material for photocatalysis.

Preparation of nanocellulose/reduced graphene oxide matrix loaded with cuprous oxide nanoparticles for efficient catalytic reduction of 4-nitrophenol.

The paper reports on the preparation of cellulose nanocrystals/reduced graphene oxide matrix loaded with cuprous oxide nanoparticles (CNC/rGO-Cu2O) through a simple solvothermal method and its application for 4-nitrophenol reduction to 4-aminophenol using sodium borohydride. The CNC/rGO-Cu2O nanocomposite was formed chemically by first mixing CNC and graphene oxide (GO) followed by complexation of the negatively charged functional groups of CNC/GO with Cu2+ ions and subsequent heating at 100°C. This resulted in the simultaneous reduction of GO to rGO and the formation of Cu2O nanoparticles. The as-elaborated nanocomposite was firstly characterized using different techniques such as atomic force microscopy, scanning electron microscopy, transmission electron microscopy, UV-Vis spectrophotometry, Raman spectroscopy and x-ray photoelectron spectroscopy. Then, it was successfully applied for efficient catalytic reduction of 4-nitrophenol to 4-aminophenol using sodium borohydride: the reduction was completed in about 6 min. After eight times use, the catalyst still maintained good catalytic performance. Compared to CNC/rGO, rGO/Cu2O and free Cu2O nanoparticles, the CNC/rGO-Cu2O nanocomposite exhibits higher catalytic activity even at lower copper loading.

Construction of mechanically robust and recyclable catalytic hydrogel based on hydroxypropyl cellulose-supported by montmorillonite/ionic liquid with different anions for pollutants(4-NP, MB, CR, Rhb) degradation.

Dye wastewater poses a serious threat to the environment and human health, necessitating sustainable degradation methods. In this study, Na-based Montmorillonite (MMT) was exfoliated using different ionic liquids ([C16MIM][Cl], [C16MIM][BF4], [C16MIM][PF6]), and silver nanoparticles (Ag NPs) were green-synthesized using hydroxypropyl cellulose (HPC). The HPC significantly enhanced the dispersion of MMT in the hydrogel. By introducing lauryl methacrylate (LMA), a hydrophobic associative network was constructed in PAM/LMA/HPC/MMT@ILs&Ag NPs hydrogel. This hydrogel demonstrated outstanding mechanical properties, with a stress of 833.21 kPa, strain of 3300 %, and toughness of 14.36 MJ/m3. It also exhibited excellent catalytic activity, with a rate constant of 0.83 min-1 for 4-nitrophenol degradation at 28 °C. The effects of temperature and catalyst concentration on the catalytic reaction were systematically investigated. This study presents a simple green synthesis approach for Ag NPs using HPC, achieving superior mechanical performance and stable MMT dispersion in aqueous solutions.

Complete genome sequence of Paraburkholderia terrae strain KU-46, a 2,4-dinitrophenol-degrading bacterium.

Paraburkholderia terrae strain KU-46 has been studied for its capability to degrade 2,4-dinitrophenol. Here, we present the complete 10,833,180bp genome of this microorganism, comprising five circular chromosomes housing 9,797 protein-coding sequences. The genes responsible for 2,4-dinitrophenol and 4-nitrophenol degradation are located on chromosome 2.

Evaluation of degradation efficacy and toxicity mitigation for 4-nitrophenol using argon and air-mixed argon plasma jets.

This paper investigates the effects of argon (Ar) and that of Ar mixed with ambient air (Ar-Air) cold plasma jets (CPJs) on 4-nitrophenol (4-NP) degradation using low input power. The introduction of ambient air into the Ar-Air plasma jet enhances ionization-driven processes during high-voltage discharge by utilizing nitrogen and oxygen molecules from ambient air, resulting in increased reactive oxygen and nitrogen species (RONS) production, which synergistically interacts with argon. This substantial generation of RONS establishes Ar-Air plasma jet as an effective method for treating 4-NP contamination in deionized water (DW). Notably, the Ar-Air plasma jet treatment outperforms that of the Ar jet. It achieves a higher degradation rate of 97.2% and a maximum energy efficiency of 57.3 gkW-1h-1, following a 6-min (min) treatment with 100 mgL-1 4-NP in DW. In contrast, Ar jet treatment yielded a lower degradation rate and an energy efficiency of 75.6% and 47.8 gkW-1h-1, respectively, under identical conditions. Furthermore, the first-order rate coefficient for 4-NP degradation was measured at 0.23 min-1 for the Ar plasma jet and significantly higher at 0.56 min-1 for the Ar-Air plasma jet. Reactive oxygen species, such as hydroxyl radical and ozone, along with energy from excited species and plasma-generated electron transfers, are responsible for CPJ-assisted 4-NP breakdown. In summary, this study examines RONS production from Ar and Ar-Air plasma jets, evaluates their 4-NP removal efficacy, and investigates the biocompatibility of 4-NP that has been degraded after plasma treatment.

Amphiphilic Dendronized Copolymer-Encapsulated Au, Ag and Pd Nanoparticles for Catalysis in the 4-Nitrophenol Reduction and Suzuki-Miyaura Reactions.

The branched structures of dendronized polymers can provide good steric stabilization for metal nanoparticle catalysts. In this work, an amphiphilic dendronized copolymer containing hydrophilic branched triethylene glycol moieties and hydrophobic branched ferrocenyl moieties is designed and prepared by one-pot ring-opening metathesis polymerization, and is used as the stabilizer for metal (Au, Ag and Pd) nanoparticles. These metal nanoparticles (Au nanoparticles: 3.5 ± 3.0 nm; Ag nanoparticles: 7.2 ± 4.0 nm; Pd nanoparticles: 2.5 ± 1.0 nm) are found to be highly active in both the 4-nitrophenol reduction and Suzuki-Miyaura reactions. In the 4-nitrophenol reduction, Pd nanoparticles have the highest catalytic ability (TOF: 2060 h-1). In addition, Pd nanoparticles are also an efficient catalyst for Suzuki-Miyaura reactions (TOF: 1980 h-1) and possess good applicability for diverse substrates. The amphiphilic dendronized copolymer will open a new door for the development of efficient metal nanoparticle catalysts.