RESUMEN
High ammonia-nitrogen digestate has become a key bottleneck limiting the anaerobic digestion of organic solid waste. Vacuum ammonia stripping can simultaneously remove and recover ammonia nitrogen, which has attracted a lot of attention in recent years. To investigate the parameter effects on the efficiency and mass transfer, five combination conditions (53 °C 15 kPa, 60 °C 20 kPa, 65 °C 25 kPa, 72 °C 35 kPa, and 81 °C 50 kPa) were conducted for ammonia stripping of sludge digestate. The results showed that 80% of ammonia nitrogen was stripped in 45 min for all experimental groups, but the ammonia transfer coefficient varied under different conditions, which increased with the rising of boiling point temperature, and reached the maximum value (39.0 mm/hr) at 81 °C 50 kPa. The ammonia nitrogen removal efficiency was more than 80% for 30 min vacuum stripping after adjusting the initial pH to above 9.5, and adjustment of the initial alkalinity also affects the pH value of liquid digestate. It was found that pH and alkalinity are the key factors influencing the ammonia nitrogen dissociation and removal efficiency, while temperature and vacuum mainly affect the ammonia nitrogen mass transfer and removal velocity. In terms of the mechanism of vacuum ammonia stripping, it underwent alkalinity destruction, pH enhancement, ammonia nitrogen dissociation, and free ammonia removal. In this study, two-stage experiments of alkalinity destruction and ammonia removal were also carried out, which showed that the two-stage configuration was beneficial for ammonia removal. It provides a theoretical basis and practical technology for the vacuum ammonia stripping from liquid digestate of organic solid waste.
Asunto(s)
Amoníaco , Temperatura , Eliminación de Residuos Líquidos , Amoníaco/química , Concentración de Iones de Hidrógeno , Vacio , Eliminación de Residuos Líquidos/métodos , Nitrógeno , Aguas del Alcantarillado/química , PresiónRESUMEN
A self-corrosion microelectrolysis (SME)-enhanced membrane-aerated biofilm reactor (eMABR) was developed for the removal of pollutants and reduction of antibiotic resistance genes (ARGs). Fe2+ and Fe3+ formed iron oxides on the biofilm, which enhanced the adsorption and redox process. SME can induce microorganisms to secrete more extracellular proteins and up-regulate the expression of ammonia monooxygenase (AMO) (0.92 log2). AMO exposed extra binding sites (ASP-69) for antibiotics, weakening the competition between NH4+-N and sulfamethoxazole (SMX). The NH4+-N removal efficiency in the S-eMABR (adding SMX and IC) increased by 44.87â¯% compared to the S-MABR (adding SMX). SME increased the removal performance of SMX by approximately 1.45 times, down-regulated the expressions of sul1 (-1.69 log2) and sul2 (-1.30 log2) genes, and controlled their transfer within the genus. This study provides a novel strategy for synergistic reduction of antibiotics and ARGs, and elucidates the corresponding mechanism based on metatranscriptomic and molecular docking analyses.
RESUMEN
The development of decarbonized synthesis approaches is a critical step in the fabrication of ammonia, an indispensable chemical and a potential carbon-neutral energy carrier. In this regard, the photocatalytic production technology has gained ample attention as a sustainable alternative to energy-intensive and environmentally detrimental Haber-Bosch process. Here, we present cobalt ferrite nanoparticles supported on microporous ZSM-5 type ferrisilicate zeolite as a desirable novel photocatalyst for the ammonia generation. The zeolite introduced as a microporous support increasing the catalytically active sites. A straightforward one-pot sol-gel method was used to synthesize cobalt ferrite (CoFe2O4) and CoFe2O4/ferrisilicate (CF/FS) nanocomposites with various weight percentages (10, 25 and 50%) of CoFe2O4. The photocatalytic performances of the samples in the production of ammonia were investigated under visible light irradiation. The highest rate of NH4+ production (484.74 µmol L-1 h-1) was achieved using the CF50%/FS photocatalyst. The distribution of < 50 nm-sized CoFe2O4 nanoparticles on the surface of the zeolite, as demonstrated by TEM images, and extensive BET surface areas are presented as convincing evidences for the improved photocatalytic activity paticularly in CF50%/FS photocatalyst.
RESUMEN
Diamond-type silicon has a work function of ≈4.8 eV, and conventional n- or p-type doping modifies the value only between 4.6 and 5.05 eV. Here, it is shown that the alkali clathrates AxSi46 have substantially lower work functions approaching 2.6 eV, with clear trends between alkali electropositivity and clathrate cage size. The low work function enables alkali clathrates such as K8Si46 to be effective Haber-Bosch catalyst supports for NH3 synthesis. The catalytic properties of Si, Ge, and Sn-based clathrates are investigated while supporting Fe and Ru on the surface. The activity largely scales with the work function, and low activation energies below 60 kJ mol-1 are observed due to strong electron donation effects from the support. Ru metal and Sn clathrates seem to be unsuitable for stability issues. Compared to other similar hydride/electride catalysts, the simple structure and composition combined with stability in air/water make a systematic study of these clathrates possible and open the door to other electron-rich Zintl phases and related intermetallics as low-work function materials suitable for catalysis. The observed low work function may also have implications for other existing electronic applications.
RESUMEN
Regulating the adsorption of an intermediate on an electrocatalyst by manipulating the electron spin state of the transition metal is of great significance for promoting the activation of inert nitrogen molecules (N2) during the electrocatalytic nitrogen reduction reaction (eNRR). However, achieving this remains challenging. Herein, a novel 2D/2D Mott-Schottky heterojunction, Co9S8/Nb2CTx-P, is developed as an eNRR catalyst. This is achieved through the in situ growth of cobalt sulfide (Co9S8) nanosheets over a Nb2CTx MXene using a solution plasma modification method. Transformation of the Co spin state from low (t2g 6eg 1) to high (t2g 5eg 2) is achieved by adjusting the interface electronic structure and sulfur vacancy of Co9S8/Nb2CTx-P. The adsorption ability of N2 is optimized through high spin Co(II) with more unpaired electrons, significantly accelerating the *N2â*NNH kinetic process. The Co9S8/Nb2CTx-P exhibits a high NH3 yield of 62.62 µg h-1 mgcat. -1 and a Faradaic efficiency (FE) of 30.33% at -0.40 V versus the reversible hydrogen electrode (RHE) in 0.1 m HCl. Additionally, it achieves an NH3 yield of 41.47 µg h-1 mgcat. -1 and FE of 23.19% at -0.60 V versus RHE in 0.1 m Na2SO4. This work demonstrates a promising strategy for constructing heterojunction electrocatalysts for efficient eNRR.
RESUMEN
Polymesoda erosa is a mangrove clam known for its water filtration ability. This clam was investigated for its bioremediation potential and growth in synthetic wastewater during 40 days of incubation. Variation in the nutrient composition of water, biochemical composition of the clams, and metagenomic analysis of the microorganisms associated with clam tissue were carried out. Significant differences in the concentration of ammonia (p ≤ 0.01), nitrite (p ≤ 0.001), and nitrate (p ≤ 0.05) in the wastewater were observed between day 0 and day 40. A reduction of approximately 89% in ammonia concentration at the end of the experiment was recorded indicating nitrification activity. However, biochemical parameters showed negligible differences before and after the incubation experiment. Thus suggesting that the chemosynthetic-based nutrition aids in the survival of the clam as no organic matter was added to the medium. The substantial decline in levels of ammonia in the presence of clams as compared to its absence suggests the significant role of clams in improving the water quality. Furthermore, the metagenomic analysis of the gill tissue of P. erosa revealed ~ 50% of the microbial population to consist of nitrifiers. The study highlights the contribution by the nitrifers associated with the clams not only to its growth and resilience but also to bioremediation.
Asunto(s)
Amoníaco , Biodegradación Ambiental , Bivalvos , Nitrificación , Aguas Residuales , Animales , Bivalvos/metabolismo , Bivalvos/microbiología , Amoníaco/metabolismo , Aguas Residuales/microbiología , Contaminantes Químicos del Agua/metabolismo , Nitritos/metabolismo , Nitratos/metabolismo , Eliminación de Residuos Líquidos/métodosRESUMEN
Acute hyperammonaemia is a medical emergency as it can progress to cerebral oedema, seizures, coma and death. Hepatic encephalopathy secondary to cirrhotic disease or portosystemic shunting are relatively well-known causes, but non-cirrhotic aetiologies of acute hyperammonaemia are less well-known, especially in the emergency department. However, an elevated ammonia is not required to make the diagnosis of hepatic encephalopathy. Although measurement of plasma ammonia is recommended for patients with acute, unexplained, altered mental status, as early identification allows early effective management which may prevent irreversible brain damage, there is currently reduced awareness among physicians of the non-cirrhotic aetiologies of acute hyperammonaemia. Furthermore, measurement of ammonia in patients with cirrhosis has been shown to have low sensitivity and specificity, and not to have altered management in the majority of cases; thus, measurement of ammonia is currently not recommended in guidelines for management of hepatic encephalopathy. We sought to describe the pathophysiology of hyperammonaemia and review the non-cirrhotic causes. This was achieved by review of MEDLINE, PubMed and Web of Science databases to include published English literature within the last 20 years. We also present a framework for investigating the acute non-cirrhotic causes of hyperammonaemia to assist both chemical pathologists and clinicians managing these often challenging cases.
Asunto(s)
Amoníaco , Encefalopatía Hepática , Hiperamonemia , Humanos , Hiperamonemia/etiología , Hiperamonemia/diagnóstico , Hiperamonemia/fisiopatología , Encefalopatía Hepática/diagnóstico , Encefalopatía Hepática/etiología , Encefalopatía Hepática/fisiopatología , Amoníaco/sangreRESUMEN
Hepatic encephalopathy (HE) is a syndrome that is associated with both acute and chronic liver injury. It manifests as a wide spectrum of neuropsychological abnormalities, ranging from subtle impairments in executive higher functions observed in cirrhosis, through to coma in acute liver failure. In acute liver failure, the central role of ammonia in the development of brain oedema has remained undisputed for 130 years. It latterly became apparent that infection and inflammation were profound determinants for the development of severe hepatic encephalopathy, associated with the development of cerebral oedema and intracranial hypertension. The relationship of the development of hepatic encephalopathy with blood ammonia levels in cirrhosis is less clear cut and the synergistic interplay of inflammation and infection with ammonia has been identified as being fundamental in the development and progression of hepatic encephalopathy. A perturbed gut microbiome and the presence of an impaired gut epithelial barrier that facilitates translocation of bacteria and bacterial degradation products into the systemic circulation, inducing systemic inflammation and innate and adaptive immune dysfunction, has now become the focus of therapies that treat hepatic encephalopathy in cirrhosis, and may explain why the prebiotic lactulose and rifaximin are efficacious. This review summarises the current clinical perspective on the roles of inflammation and infection in hepatic encephalopathy and presents the evidence base for existing therapies and those in development in the setting of acute and chronic liver failure.
RESUMEN
This study investigated the community characteristics and environmental influencing factors of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in the surface sediments of the East China Sea. The research found no consistent pattern in the richness and diversity of AOA and AOB with respect to the distance from the shore, indicating a complex interplay of factors. The expression levels of AOA amoA gene and AOB amoA gene in the surface sediments of the East China Sea ranged from 4.49 × 102 to 2.17 × 106 copies per gram of sediment and from 6.6 × 101 to 7.65 × 104 copies per gram of sediment, respectively. Salinity (31.77 to 34.53 PSU) and nitrate concentration (1.51 to 10.12 µmol/L) were identified as key environmental factors significantly affecting the AOA community, while salinity and temperature (13.71 to 19.50 °C) were crucial for the AOB community. The study also found that AOA, dominated by the Nitrosopumilaceae family, exhibited higher gene expression levels than AOB, suggesting a more significant role in ammonia oxidation. The expression of AOB was sensitive to multiple environmental factors, indicating a responsive role in nitrogen cycles and ecosystem health. The findings contribute to a better understanding of the biogeochemical processes and ecological roles of ammonia-oxidizing microorganisms in marine sediments.
RESUMEN
Heterotrophic nitrification (HN) bacteria use organic carbon sources to remove ammonia nitrogen (NH4+-N); however, the mechanisms of carbon and nitrogen metabolism are unknown. To understand this mechanism, HN functional microbial communities named MG and MA were enriched with glucose and sodium acetate, respectively. The NH4+-N removal efficiencies were 98.87 % and 98.91 %, with 88.06 % and 69.77 % nitrogen assimilation for MG and MA at 22 h and 10 h, respectively. Fungi (52.86 %) were more competitive in MG, and bacteria (99.99 %) were dominant in MA. Metagenomic and metabolomic analyses indicated that HN might be a signaling molecule (NO) in the production and detoxification processes when MG metabolizes glucose (amo, hao, and nosZ were not detected). MA metabolizes sodium acetate to produce less energy and promotes nitrogen oxidation reduction; however, genes (hao, hox, and NOS2) were not detected. These results suggest that NO and energy requirements induce microbial HN.
Asunto(s)
Bacterias , Glucosa , Metabolómica , Metagenómica , Nitrificación , Nitrógeno , Acetato de Sodio , Acetato de Sodio/farmacología , Nitrógeno/metabolismo , Glucosa/metabolismo , Metagenómica/métodos , Bacterias/metabolismo , Bacterias/genética , Procesos Heterotróficos , Hongos/metabolismo , Hongos/genéticaRESUMEN
This study investigated the synthesis of cerium oxide (CeO2) nanoparticles (NPs) and composites with reduced graphene oxide (rGO) for the enhanced electrochemical sensing of ammonia. CeO2 NPs were prepared by the focused laser ablation in liquid (LAL) method, which enabled the production of high-purity, spherical nanoparticles with a uniform dispersion and sizes under 50 nm in a short time. The effects of varying irradiation fluence and time on the nanoparticle size, production yield, and dispersion were systematically studied. The synthesized CeO2 NPs were doped with rGO to form CeO2/rGO composites, which were drop casted to modify the glassy carbon electrodes (GCE). The CeO2/rGO-GCE electrodes exhibited superior electrochemical properties compared with single-component electrodes, which demonstrated the significant potential for ammonia detection, especially at a 4 J/cm2 fluence. The CeO2/rGO composites showed uniformly dispersed CeO2 NPs between the rGO sheets, which enhanced the conductivity, as confirmed by SEM, EDS mapping, and XRD analysis. Cyclic voltammetry data demonstrated superior electrochemical activity of the CeO2/rGO composite electrodes, with the 2rGO/1CeO2 ratio showing the highest current response and sensitivity. The CV response to varying ammonia concentrations exhibited a linear relationship, indicating the electrode's capability for accurate quantification. These findings highlight the effectiveness of focused laser ablation in enhancing nanoparticle synthesis and the promising synergistic effects of CeO2 and rGO in developing high-performance electrochemical sensors.
RESUMEN
This study investigated the effects of feeding clinoptilolite (CLN; 2.5% of diet DM) with a particle size of either 30- or 400-µm on ruminal fermentation characteristics, measures of nitrogen (N) utilization, and manure ammonia-N (NH3) emissions in feedlot cattle. The impact of directly applying 30- or 400-µm CLN to the pen surface (2,250 kg/ha) on manure NH3-N emissions was also evaluated. Six beef heifers were used in a replicated 3 × 3 Latin square design with 21-d periods. Dietary treatments were: 1) finishing ration with no supplement (CON), 2) CON + 30-µm CLN (CLN-30), and 3) CON + 400-µm CL (CLN-400). Intake was measured daily. To evaluate fermentation characteristics, ruminal fluid was collected on d 19. Indwelling pH loggers were used to measure ruminal pH from d 15 to 21. Blood was collected 3-h post-feeding on d 21 for metabolite analysis. Fecal grab and urine spot samples were also collected from d 19 to 21 to measure nutrient digestibility, route of N excretion, and in vitro NH3 emissions. There was no diet effect (P ≥ 0.12) on nutrient intake and apparent total tract digestibility, and ruminal short chain fatty acid (SCFA) profile and pH. Ruminal NH3 concentration, which was lower (P = 0.04) for CLN-30 than CON heifers, did not differ between CON and CLN-400 heifers. Although there was no diet effect (P = 0.50) on plasma urea-N (PUN) concentration, proportion of urea-N excreted in urine was lower (P = 0.01) for CLN-30 than CON and CLN-400 heifers. Urinary NH3-N excretion, which was greater (P ≤ 0.04) for CLN-400 than CON heifers, did not differ between CLN-30 and CLN-400 heifers. Feeding CLN also increased (P ≤ 0.02) fecal excretion of potassium (K) and iron (Fe) and reduced (P = 0.01) urinary excretion of calcium (Ca). There was a treatment × time interaction (P = 0.01) for NH3 emission rate, which was greatest within the first 36 h of incubation and was lower for manure from CLN-400 compared to CON and CLN-30 heifers and pen surface application treatments. Cumulative NH3 emissions were lower (P < 0.01) for manure from CLN-400 compared to CON and CLN-30 heifers and the pen surface application treatments. Although surface application was ineffective, feeding 400-µm CLN to finishing cattle could result in a beneficial decrease in manure NH3 emissions. However, changes in fecal and urine excretion of minerals like K and Ca, which suggest a decrease in bioavailability, need to be considered when feeding CLN in finishing cattle diets.
RESUMEN
Leachate emanating from landfills contains ammonia which may cause serious health effects on living things. An effectively designed clay barrier should not allow the contaminant to infiltrate the soil and groundwater systems. The utilization of certain industrial by-products in engineered landfill barriers, not only reduces the need for conventional liner materials but also helps in sustainable waste management. This study investigated the hydraulic conductivity, unconfined compressive strength, compaction, and adsorption characteristics of lithomargic clay blended with an optimum percentage of bentonite (10%) and granulated blast furnace slag (15%) permeated with ammonia. The results revealed that increasing the content of granulated blast furnace slag decreased the maximum dry density while increasing the optimum moisture content. In comparison to lithomargic clay, the hydraulic conductivity of the amended soil liner permeated with ammonia decreased from a value of 3 × 10-8 m/s to 5 × 10-10 m/s. The unconfined compressive strength of the amended soil specimens showed an increasing trend with curing times (i.e., 0, 14, 28, and 56 days). The batch adsorption results revealed that Freundlich and Langmuir's isotherm fits the equilibrium adsorption data and the adsorption of ammonia on clay liner follows non-linear behaviour. Overall, the experimental results implied that lithomargic clay blended with 10% bentonite and 15% granulated blast furnace slag can be used as an impermeable soil reactive barrier in engineered landfills.
Asunto(s)
Amoníaco , Bentonita , Residuos Sólidos , Instalaciones de Eliminación de Residuos , Bentonita/química , Amoníaco/química , Adsorción , Eliminación de Residuos/métodos , Suelo/química , Administración de Residuos/métodos , Contaminantes Químicos del Agua/química , Arcilla/químicaRESUMEN
Water is essential for the survival of all living things; however, its extensive use in agriculture, high-tech manufacturing, energy production, and the rapid development of the chemical and petroleum industries has led to significant contamination, making water pollution a major concern today. Ammonia is one of the most harmful contaminants present in water, posing significant environmental and health risks that require appropriate remediation methods. To remove ammonia from contaminated water, we employ Carbon Nanotubes (CNTs) and Activated Carbon (AC). To ensure appropriate metal impregnation on the adsorbents, Fe, Al, Ag, and Cu were impregnated into both CNT and AC, followed by extensive characterization using Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and Energy Dispersive X-rays (EDX). To optimize ammonia removal from water, several parameters were adjusted, including pH, dose amount, contact time, shaking speed, and temperature. Astonishingly, the highest removal efficiency of 40% was achieved with a 1 g dosage at pH 10.5 and 200 RPM, while silver oxide had a lower removal rate of 10% under the same conditions. Temperature additionally had a significant impact, with removal percentages reaching 40% at 70 °C as compared to 21.5% at 25 °C. Adsorption isotherms were used to analyze the experimental data, along with Langmuir and Freundlich's models. Notably, Langmuir produced superior curve fitting, resulting in a correlation factor close to one. Furthermore, kinetic modeling was carried out with 2nd-order and pseudo-2nd-order equations, with the latter responding better according to curve analysis. Because the ammonia removal rate was low, this study indicates the feasibility of implementing an adsorption technique using CNT and AC as a pre-treatment method for this purpose. This approach has the potential for future optimization and deployment in tackling water contamination concerns effectively.
RESUMEN
Electrochemical nitrogen reduction reaction (e-NRR) is an eco-friendly alternative approach to generate ammonia under ambient conditions, with very low power supply. But, developing of an efficient catalyst by suppressing parallel hydrogen evolution reaction as well as avoiding the catalysts poisoning either by hydrogen or electrolyte ion is an open question. So, in order to screen the single atom catalysts (SACs) for the e-NRR, we proposed a descriptor-based approach using density functional theory (DFT) based calculations. We investigated total 24 different SACs of types TM-Pc, TM-N3C1, TM-N2C2, TM-NC3 and TM-N4, considering transition metal (TM). We have considered mainly BF3 ion to understand the role of electrolyte and extended the study for four more electrolyte ions, Cl, ClO4, SO4, OH. Herein, to predict catalytic activity for a given catalyst we have tested 16 different electronic parameters. Out of those, electronic parameter dxz↓ occupancy, identified as electronic descriptor, is showing an excellent linear correlation with catalytic activity (R2 = 0.86). Furthermore, the selectivity of e-NRR over HER is defined by using an energy parameter ∆G*H-∆G*NNH. Further, the electronic descriptor (dxz↓ occupancy) can be used to predict promising catalysts for e-NRR, thus reducing the efforts on designing future single atom catalysts (SACs).
RESUMEN
Electrochemical conversion from nitrate to ammonia is a key step in sustainable ammonia production. However, it suffers from low productive efficiency or high energy consumption due to a lack of desired electrocatalysts. Here we report nickel cobalt phosphide (NiCoP) catalysts for nitrate-to-ammonia electrocatalysis that display a record-high catalytic current density of -702±7 mA cm-2, ammonia production rate of 5415±26 mmol gcat-1 h-1 and Faraday efficiency of 99.7±0.2 % at -0.3 V vs. RHE, affording the estimated energy consumption as low as 22.7 kWh kgammonia-1. Theoretical and experimental results reveal that these catalysts benefit from hydrogen poisoning effects under low overpotentials, which leave behind catalytically inert adsorbed hydrogen species (HI*) at Co-hollow sites and thereupon enable ideally reactive HII* at secondary Co-P sites. The dimerization between HI* and HII* for H2 evolution is blocked due to the catalytic inertia of HI* thereby the HII* drives nitrate hydrogenation timely. With these catalysts, the continuous ammonia production is further shown in an electrolyser with a real energy consumption of 18.9 kWh kgammonia-1.
RESUMEN
We expected mitigation of the hypophagic effects of urea (U) with a coated urea (CU) product that aimed to partially shift urea supply to the post-ruminal gastrointestinal tract. Ruminal release and post-ruminal digestibility of CU was evaluated in vitro, followed by a randomised complete block experiment (54 Holstein-Friesian cows; 177 ± 72 days in milk). Soybean meal (SBM) was partially (PR) or fully (FR) replaced on an isonitrogenous basis by beet pulp and U or CU. Urea sources were included at 12 (U-PR, CU-PR) and 19 (U-FR, CU-FR) g/kg dietary dry matter (DM). Hypophagic effects were similar for U-PR and CU-PR (-11% vs. -7%), and for U-FR and CU-FR (-13% vs. -12%) compared with SBM (average 25.8 kg DM intake/d). Compared with SBM, U-PR and CU-PR reduced yields of milk (-8%) and protein (-12%), U-PR reduced yield of fat (-9%) and fat- and protein-corrected-milk (FPCM; -9%), and CU-PR tended to reduce FPCM yield (-5%). Compared with SBM, U-FR and CU-FR respectively reduced yields of milk (-21%, -22%), protein (-25%, -26%), fat (both -14%), lactose (-20%, -21%), and FPCM (-17%, -19%), and lowered N (-15%, -12%) and feed (-8%, trend, -9%) efficiency. Human-edible protein efficiency approximately doubled with U-PR and CU-PR and approximately tripled with U-FR and CU-FR compared with SBM. Milk composition and plasma urea concentration were similar between U and CU, except for a trend for a greater plasma urea concentration with U-PR compared with CU-PR. Dry matter intake patterns differed for CU-PR compared with U-PR and for CU-FR compared with U-FR, suggesting effects of urea release rate or location on feeding behaviour. Overall, replacing SBM with U or CU reduced DM intake and milk production and affected nutrient efficiencies. Coated urea influenced DM intake pattern but did not affect total DM intake or milk production compared with U.
RESUMEN
A multi-stage oxic biofilm system based on hydrophilic polyurethane foam was established and operated for advanced treatment of coking wastewater, in which distinct gradient variations of pollutants removal, biofilm properties and microbial community in the 5 stages were evaluated. The system rapidly achieved NH+4-N removal efficiency of 97.51⯱â¯2.29â¯% within 8â¯days. The biofilm growing attached on the carriers exhibited high biomass (≥10.29â¯g/L), which ensured sufficient microbial population. Additionally, the rising extracellular polymeric substance and declining proteins/polysaccharides ratios across stages suggested a dense-to-loose transition in the biofilm's structure, in response to the varying pollutant concentrations. The dominance of Nitrosomonas cluster in the first 3 stages and Nitrospira lineage in the following 2 stages facilitated the complete depletion of high NH+4-N concentration without NO- 2-N accumulation. Overall, the distinct biofilm property and community at each stage, shaped by the multi-stage configuration, maximized the pollutants removal efficiency.
RESUMEN
Ammonia oxidation is a key step in the biogeochemical cycling of nitrogen, and soils are important ecosystems for nitrogen flux globally. Approximately 25% of the world's soils are alkaline. While nitrification has been studied more extensively in agricultural alkaline soils, less is known about natural, unfertilized alkaline soils. In this study, microorganisms responsible for ammonia oxidation and several environmental factors (season, temperature, ammonia concentration, and moisture content) known to affect nitrification were studied in an alkaline forest soil with a pH ranging from 8.36 to 8.77. Ammonia-oxidizing bacteria (AOB), ammonia-oxidizing archaea, and comammox were present, and AOB belonging to genera Nitrosospira and Nitrosomonas, originally comprising <0.01% of the total bacterial community, responded rapidly to ammonia addition to the soil. No significant difference was observed in nitrification rates between seasons, but there was a significant difference between in situ field nitrification rates and rates in laboratory microcosms. Surprisingly, nitrification took place under many of the tested conditions, but there was no detectable increase in the abundance of any recognizable group of ammonia oxidizers. This study raises questions about the role of low-abundance microorganisms in microbial processes and of situations where zero or very low microbial growth coincides with metabolic activity. In addition, this study provides insights into nitrification in unfertilized alkaline soil and supports previous studies, which found that AOB play an important role in alkaline soils supplemented with ammonia, including agricultural ecosystems.
RESUMEN
Developing sustainable energy solutions is critical for addressing the dual challenges of energy demand and environmental impact. In this study, a zinc-nitrate (Zn-NO3-) battery system was designed for the simultaneous production of ammonia (NH3) via the electrocatalytic NO3- reduction reaction (NO3RR) and electricity generation. Continuous wave CO2 laser irradiation yielded precisely controlled CoFe2O4@nitrogen-doped carbon (CoFe2O4@NC) hollow nanocubes from CoFe Prussian blue analogs (CoFe-PBA) as the integral electrocatalyst for NO3RR in 1.0-M KOH, achieving a remarkable NH3 production rate of 10.9 mgh-1cm-2 at -0.47 V versus RHE with exceptional stability. In-situ and ex-situ methods revealed that the CoFe2O4@NC surface transformed into high-valent Fe/CoOOH active-species, optimizing the adsorption energy of NO3RR (*NO2 and *NO species) intermediates. Furthermore, DFT calculations validated the possible NO3RR pathway on CoFe2O4@NC starting with NO3- conversion to *NO2 intermediates, followed by reduction to *NO. Subsequent protonation forms the *NH and *NH2 species, leading to NH3 formation via final protonation. The Zn-NO3- battery utilizing the CoFe2O4@NC cathode exhibits dual functionality by generating electricity with a stable open-circuit voltage of 1.38-V versus Zn/Zn2+ and producing NH3. This study inspires the simple design of low-cost catalysts for NO3RR-to-NH3 conversion and positions the Zn-NO3- battery as a promising technology for industrial applications.