RESUMEN
In this study, a new amperometric biosensor was developed for glucose determination. For this purpose, polyaniline-polypyrrole-poly(sodium-4-styrenesulfonate) film was prepared by electropolymerization of aniline and pyrrole with poly(sodium-4-styrenesulfonate) on a platinum plate. The best working conditions of the polyaniline-polypyrrole-poly(sodium-4-styrenesulfonate) film were determined. The glucose oxidase enzyme was immobilized by the entrapment method in polyaniline-polypyrrole-poly(sodium-4-styrenesulfonate) film. Glucose determination was made based on the oxidation of hydrogen peroxide, which is formed as a result of the enzymatic reaction on the surface of the prepared biosensor at +0.40 V. The working range for the glucose determination of the biosensor was determined. The effects of pH and temperature on the response of the glucose biosensor were investigated. The reusability and shelf life of the biosensor were determined. The effects of interference in biological environments on the response of the biosensor were investigated. Glucose determination was made in the biological fluid (blood) with the prepared biosensor. This study has a feature that sheds light on biosensor studies to be developed for the detection of substances in the human body, such as glucose, uric acid, and urea. This article will set an example for future scientific research on the development of a sensor for other biological fluids in the human body, such as the sensor developed for blood samples. In addition, this developed sensor provides an innovation that improves the quality of life of patients by allowing them to constantly monitor their glucose levels and intervene when necessary.
RESUMEN
A LOx-based electrochemical biosensor for high-level lactate determination was developed. For the construction of the biosensor, chitosan and Nafion layers were integrated by using a spin coating procedure, leading to less porous surfaces in comparison with those recorded after a drop casting procedure. The analytical performance of the resulting biosensor for lactate determination was evaluated in batch and flow regime, displaying satisfactory results in both modes ranging from 0.5 to 20 mM concentration range for assessing the lactic acidosis. Finally, the lactate levels in raw serum samples were estimated using the biosensor developed and verified with a blood gas analyzer. Based on these results, the biosensor developed is promising for its use in healthcare environment, after its proper miniaturization. A pH probe based on common polyaniline-based electrochemical sensor was also developed to assist the biosensor for the lactic acidosis monitoring, leading to excellent results in stock solutions ranging from 6.0 to 8.0 mM and raw plasma samples. The results were confirmed by using two different approaches, blood gas analyzer and pH-meter. Consequently, the lactic acidosis monitoring could be achieved in continuous flow regime using both (bio)sensors.
Asunto(s)
Técnicas Biosensibles , Técnicas Electroquímicas , Ácido Láctico , Técnicas Biosensibles/métodos , Técnicas Biosensibles/instrumentación , Concentración de Iones de Hidrógeno , Ácido Láctico/sangre , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentación , Humanos , Acidosis Láctica/sangre , Acidosis Láctica/diagnóstico , Quitosano/química , Polímeros de Fluorocarbono/química , Compuestos de Anilina/química , Enzimas Inmovilizadas/química , Oxigenasas de Función MixtaRESUMEN
This study describes the development of a highly sensitive amperometric biosensor for the analysis of phenolic compounds such as catechol. The biosensor architecture is based on the immobilization of tyrosinase (Tyr) on a screen-printed carbon electrode (SPE) modified with nanodiamond particles (ND), 1-butyl-3-methylimidazolium hexafluorophosphate (IL) and poly-l-lysine (PLL). Surface morphologies of the electrodes during the modification process were evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to investigate the electrochemical characteristics of the modified electrodes. Owing to the synergistic effect of the modification materials, the Tyr/PLL/ND-IL/SPE exhibited high sensitivity (328.2 µA mM-1) towards catechol with a wide linear range (5.0 × 10-8 - 1.2 × 10-5 M) and low detection limit (1.1 × 10-8 M). Furthermore, the method demonstrated good reproducibility and stability. The amperometric response of the biosensor towards other phenolic compounds such as bisphenol A, phenol, p-nitrophenol, m-cresol, p-cresol and o-cresol was also investigated. The analytical applicability of the biosensor was tested by the analysis of catechol in tap water. The results of the tap water analysis showed that the Tyr/PLL/ND-IL/SPE can be used as a practical and effective method for catechol determination.
Asunto(s)
Técnicas Biosensibles , Líquidos Iónicos , Nanodiamantes , Líquidos Iónicos/análisis , Polilisina , Reproducibilidad de los Resultados , Fenoles/análisis , Catecoles/análisis , Catecoles/química , Monofenol Monooxigenasa/química , Carbono/química , Agua , Técnicas Biosensibles/métodos , Electrodos , Técnicas Electroquímicas/métodosRESUMEN
Glutamate (GLU) is a primary excitatory neurotransmitter, and its dysregulation is associated with several neurodegenerative disorders. A major challenge in GLU estimation is the existence of other biomolecules in the brain that could directly get oxidized at the electrode. Hence, highly selective electroenzymatic biosensors that enable rapid estimation of GLU are needed. Initially, a copolymer, poly(2-dimethylaminoethyl methacrylate- styrene) was synthesized through reversible addition-fragmentation chain transfer polymerization to noncovalently functionalize reduced graphene oxide (rGO), named DS-rGO. Glutamate oxidase macromolecule immobilized DS-rGO formed enzyme nanosheets, which was drop-coated over Prussian blue electrodeposited disposable electrodes to fabricate the GLU biosensor. The interconnectivity between the enzyme nanosheets and the Prussian blue endows the biosensor with enhanced conductivity and electrochemical activity. The biosensor exhibited a linearity: 3.25-250 µM; sensitivity: 3.96 µA mM-1 cm-2, and a limit of detection: 0.96 µM for GLU in the Neurobasal Medium. The biosensor was applied to an in vitro primary rat cortical model to discriminate GLU levels in Neurobasal Medium, before and after KCl mediated depolarization, which provides new insights for elucidating neuronal functioning in the brain.
Asunto(s)
Técnicas Biosensibles , Ácido Glutámico , Animales , Ratas , Ácido Glutámico/química , Ferrocianuros/química , Enzimas Inmovilizadas/química , Electrodos , NeuronasRESUMEN
Amino acid L-arginine (Arg), usually presented in food products and biological liquids, can serve both as a useful indicator of food quality and an important biomarker in medicine. The biosensors based on Arg-selective enzymes are the most promising devices for Arg assay. In this research, three types of amperometric biosensors have been fabricated. They exploit arginine oxidase (ArgO), recombinant arginase I (ARG)/urease, and arginine deiminase (ADI) coupled with the ammonium-chelating redox-active nanoparticles. Cadmium-copper nanoparticles (nCdCu) as the most effective nanochelators were used for the development of ammonium chemosensors and enzyme-coupled Arg biosensors. The fabricated enzyme/nCdCu-containing bioelectrodes show wide linear ranges (up to 200 µM), satisfactory storage stabilities (14 days), and high sensitivities (Aâ M-1â m-2) to Arg: 1650, 1700, and 4500 for ADI-, ArgO- and ARG/urease-based sensors, respectively. All biosensors have been exploited to estimate Arg content in commercial juices. The obtained data correlate well with the values obtained by the reference method. A hypothetic scheme for mechanism of action of ammonium nanochelators in electron transfer reaction on the arginine-sensing electrodes has been proposed.
Asunto(s)
Compuestos de Amonio , Técnicas Biosensibles , Ureasa/química , Arginina , Arginasa/metabolismoRESUMEN
Cellobiohydrolases are crucial for cellulose breakdown, but their efficiency on crystalline cellulose is hampered by limited access to single chain ends to initiate hydrolysis. As a result, they depend on enzymes like lytic polysaccharide monooxygenases (LPMOs), which directly target the crystalline cellulose surface. This study investigated how LPMO pretreatment affected the productive binding capacity of a Trichoderma longibrachiatum cellobiohydrolase, TlCBHI, on crystalline cellulose by applying an amperometric cellobiose dehydrogenase biosensor. After the 24-hour of LPMO pretreatment, the productive binding capacity of TlCBHI significantly increased in all reactions. However, with a shorter 5-hour LPMO pretreatment, minimal to no effect on productive binding capacity was observed. Of note, all LPMO reactions were inactivated around this time point. This delayed LPMO effect suggests that the improved binding capacity for cellulases does not directly result from cellulose chain cleavage by LPMOs but rather from the cellulose decrystallization following the oxidative cleavage.
RESUMEN
L-Lactate is an indicator of food quality, so its monitoring is essential. Enzymes of L-Lactate metabolism are promising tools for this aim. We describe here some highly sensitive biosensors for L-Lactate determination which were developed using flavocytochrome b2 (Fcb2) as a bio-recognition element, and electroactive nanoparticles (NPs) for enzyme immobilization. The enzyme was isolated from cells of the thermotolerant yeast Ogataea polymorpha. The possibility of direct electron transfer from the reduced form of Fcb2 to graphite electrodes has been confirmed, and the amplification of the electrochemical communication between the immobilized Fcb2 and the electrode surface was demonstrated to be achieved using redox nanomediators, both bound and freely diffusing. The fabricated biosensors exhibited high sensitivity (up to 1436 A·M-1·m-2), fast responses, and low limits of detection. One of the most effective biosensors, which contained co-immobilized Fcb2 and the hexacyanoferrate of gold, having a sensitivity of 253 A·M-1·m-2 without freely diffusing redox mediators, was used for L-Lactate analysis in samples of yogurts. A high correlation was observed between the values of analyte content determined using the biosensor and referenced enzymatic-chemical photometric methods. The developed biosensors based on Fcb2-mediated electroactive nanoparticles can be promising for applications in laboratories of food control.
Asunto(s)
Técnicas Biosensibles , Nanopartículas , Ácido Láctico/análisis , Pichia/metabolismo , Técnicas Biosensibles/métodos , Electrodos , Enzimas Inmovilizadas/metabolismoRESUMEN
Catalytically active nanomaterials, in particular, nanozymes, are promising candidates for applications in biosensors due to their excellent catalytic activity, stability and cost-effective preparation. Nanozymes with peroxidase-like activities are prospective candidates for applications in biosensors. The purpose of the current work is to develop cholesterol oxidase-based amperometric bionanosensors using novel nanocomposites as peroxidase (HRP) mimetics. To select the most electroactive chemosensor on hydrogen peroxide, a wide range of nanomaterials were synthesized and characterized using cyclic voltammetry (CV) and chronoamperometry. Pt NPs were deposited on the surface of a glassy carbon electrode (GCE) in order to improve the conductivity and sensitivity of the nanocomposites. The most HRP-like active bi-metallic CuFe nanoparticles (nCuFe) were placed on a previously nano-platinized electrode, followed by conjugation of cholesterol oxidase (ChOx) in a cross-linking film formed by cysteamine and glutaraldehyde. The constructed nanostructured bioelectrode ChOx/nCuFe/nPt/GCE was characterized by CV and chronoamperometry in the presence of cholesterol. The bionanosensor (ChOx/nCuFe/nPt/GCE) shows a high sensitivity (3960 A·M-1·m-2) for cholesterol, a wide linear range (2-50 µM) and good storage stability at a low working potential (-0.25 V vs. Ag/AgCl/3 M KCl). The constructed bionanosensor was tested on a real serum sample. A detailed comparative analysis of the bioanalytical characteristics of the developed cholesterol bionanosensor and the known analogs is presented.
RESUMEN
Escherichia coli (E. coli) O157:H7 is a pathogenic bacterium that causes serious toxic effects in the human gastrointestinal tract. In this paper, a method for its effective analytical control in a milk sample was developed. To perform rapid (1 h) and accurate analysis, monodisperse Fe3O4@Au magnetic nanoparticles were synthesized and used in an electrochemical sandwich-type magnetic immunoassay. Screen-printed carbon electrodes (SPCE) were used as transducers, and electrochemical detection was performed by chronoamperometry using a secondary horseradish peroxidase-labeled antibody and 3,3',5,5'-tetramethylbenzidine. This magnetic assay was used to determine the E. coli O157:H7 strain in the linear range from 20 to 2 × 106 CFU/mL, with a limit of detection of 20 CFU/mL. The selectivity of the assay was tested using Listeria monocytogenes p60 protein, and the applicability of the assay was assessed by analyzing a commercial milk sample, demonstrating the usefulness of the synthesized nanoparticles in the developed magnetic immunoassay.
Asunto(s)
Escherichia coli O157 , Nanopartículas de Magnetita , Humanos , Nanopartículas de Magnetita/química , Inmunoensayo/métodos , CarbonoRESUMEN
The detection of lactate is an important indicator of the freshness, stability, and storage stability of products as well as the degree of fermentation in the food industry. In addition, it can be used as a diagnostic tool in patients' healthcare since it is known that the lactate level in blood increases in some pathological conditions. Thus, the determination of lactate level plays an important role in not only the food industry but also in health fields. As a result, biosensor technologies, which are quick, cheap, and easy to use, have become important for lactate detection. In the current study, amperometric lactate biosensors based on lactate oxidase immobilization (with Nafion 5% wt) were designed and the limit of detection, linear range, and sensitivity values were determined to be 31 µM, 50-350 µM, and 0.04 µA µM-1 cm-2, respectively. Then, it was used for the measurement of lactic acid that produced by six different and morphologically identified presumptive lactic acid bacteria (LAB) which are isolated from different naturally fermented cheese samples. The biosensors were then used to successfully perform lactate measurements within 3 min for each sample, even though a few of them were out of the limit of detection. Thus, electrochemical biosensors should be used as an alternative and quick solutions for the measurement of lactate metabolites rather than the traditional methods which require long working hours. This is the first study to use a biosensor to measure lactate produced by foodborne LAB in a real sample.
Asunto(s)
Técnicas Biosensibles , Ácido Láctico , Humanos , Ácido Láctico/metabolismo , Enzimas Inmovilizadas/metabolismo , Técnicas Biosensibles/métodos , Industria de Alimentos , FermentaciónRESUMEN
Sugar and artificial sweeteners are additives in packaged food and beverage products that are widely used, where excessive sugar consumption can cause an increase in various diseases. Detection and classification of natural sugars sucrose, fructose, glucose, and artificial sweetener aspartame are needed to determine the effects of consuming these sweeteners. This study uses an amperometric biosensor integrated biochip-D, which uses Saccharomyces cerevisiae as a bioreceptor through cellular metabolic respiration activity expressed in dissolved oxygen (DO) levels. The variations of sweetener concentration used were in the range of 50 mM to 250 mM. The measurement results showed that the higher the concentration of sugar and artificial sweeteners, the lower DO levels would be measured. It was due to the yeast cell respiration in consuming oxygen (O2) and producing carbon dioxide (CO2), where the decrease in DO levels of sucrose was 14.24%, fructose was 18.02%, glucose was 16.59%, and aspartame was 20.45% at a concentration of 250 mM. The measurement data was clustered and classified using principal component analysis (PCA), which resulted in data variance percentages of 92.80% and 89.40% for the two main components. In the application studies of the biosensor, sensitive determination of sugar in the beverage samples was investigated. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05625-8.
RESUMEN
The aim of the current research is to design alcohol oxidase-based amperometric biosensors (ABSs) using hybrid metallic nanoparticles as artificial peroxidases (PO) or PO-like nanozymes (NZs). A lot of metallic PO-like NZs were synthesized and tested with respect to their ability to substitute natural PO in solution and on amperometric electrode. The most effective PO mimetics were coupled with alcohol oxidase (AOX) on graphite electrodes (GEs) and characterized. Two types of modified GEs, namely, the AOX/nAuCePt/GE and the AOX/nFePtAu/GE show the highest sensitivities to ethanol (2600 Aâ M-1â m-2 and 1250 Aâ M-1â m-2, respectively), low limits of detection (1.5 µM and 2.2 µM), broad linear ranges (5 - 100 µM and 12 - 120 µM), as well as satisfactory storage stabilities. The most sensitive bioelectrode AOX/nAuCePt/GE was used as ABS for ethanol determination in real samples. The practical feasibility of the constructed ABS was demonstrated by determination of ethanol in beverages, human blood and saliva.
Asunto(s)
Técnicas Biosensibles , Grafito , Humanos , Peroxidasa , Etanol , Oxidorreductasas de Alcohol , Técnicas Biosensibles/métodos , OxidorreductasasRESUMEN
We report two novel genosensors for the quantification of SARS-CoV-2 nucleic acid using glassy carbon electrodes modified with a biocapture nanoplatform made of multi-walled carbon nanotubes (MWCNTs) non-covalently functionalized with avidin (Av) as a support of the biotinylated-DNA probes. One of the genosensors was based on impedimetric transduction offering a non-labelled and non-amplified detection of SARS-CoV-2 nucleic acid through the increment of [Fe(CN)6]3-/4- charge transfer resistance. This biosensor presented an excellent analytical performance, with a linear range of 1.0 × 10-18 M - 1.0 × 10-11 M, a sensitivity of (5.8 ± 0.6) x 102 Ω M-1 (r2 = 0.994), detection and quantification limits of 0.33 aM and 1.0 aM, respectively; and reproducibilities of 5.4% for 1.0 × 10-15 M target using the same MWCNTs-Av-bDNAp nanoplatform, and 6.9% for 1.0 × 10-15 M target using 3 different nanoplatforms. The other genosensor was based on a sandwich hybridization scheme and amperometric transduction using the streptavidin(Strep)-biotinylated horseradish peroxidase (bHRP)/hydrogen peroxide/hydroquinone (HQ) system. This genosensor allowed an extremely sensitive quantification of the SARS-CoV-2 nucleic acid, with a linear range of 1.0 × 10-20 M - 1.0 × 10-17 M, detection limit at zM level, and a reproducibility of 11% for genosensors prepared with the same MWCNTs-Av-bDNAp1 nanoplatform. As a proof-of-concept, and considering the extremely high sensitivity, the genosensor was challenged with highly diluted samples obtained from SARS-CoV-2 RNA PCR amplification.
RESUMEN
Nitrite plays a critical role in a variety of physiological processes and maintaining the nitrite level in an appropriate range is vital to keep healthy. Current nitrite analysis methods lack sensitivity and require tedious operations, which could not meet the need of point-of-care (POC) nitrite detection in precision medicine. Here we present a cyanocobalamin (VB12) bionic enzyme-assisted ion-selective amperometric biosensor based on 3D porous conductive matrix (PCM), which can facilitate rapid and accurate POC nitrite monitoring in complex biofluids. The experimental findings quantitatively demonstrate that the biosensor has a sensitivity of 64.08 µA/(mM·cm2), a wide linear range of 0.025-45 mM, and low limit of detection of 1 nM. Moreover, the developed VB12/BSA-PCM biosensor shows outstanding stability after 21 days with 2% decline in current signal, and high repeatability between batches with RSD of only 1.29%. Real salivary nitrite detection has been evaluated, and the results match well with the commercial nitrite analyzer. Thus, the bionic enzyme-assisted ion-selective amperometric biosensor proposed herein has potential utility as an affordable tool for POC detection and home-based healthcare.
Asunto(s)
Técnicas Biosensibles , Nitritos , Biónica , Técnicas Biosensibles/métodos , Técnicas Electroquímicas , Electrodos , Enzimas Inmovilizadas , Nitritos/análisis , Sistemas de Atención de Punto , Porosidad , Vitamina B 12RESUMEN
Bacterial infections in marine fishes are linked to mass mortality issues; hence, rapid detection of an infection can contribute to achieving a faster diagnosis using point-of-care testing. There has been substantial interest in identifying diagnostic biomarkers that can be detected in major organs to predict bacterial infections. Aspartate was identified as an important biomarker for bacterial infection diagnosis in olive flounder (Paralichthys olivaceus) fish. To determine aspartate levels, an amperometric biosensor was designed based on bi-enzymes, namely, glutamate oxidase (GluOx) and aspartate transaminase (AST), which were physisorbed on copolymer reduced graphene oxide (P-rGO), referred to as enzyme nanosheets (GluOx-ASTENs). The GluOx-ASTENs were drop casted onto a Prussian blue electrodeposited screen-printed carbon electrode (PB/SPCE). The proposed biosensor was optimized by operating variables including the enzyme loading amount, coreactant (α-ketoglutarate) concentration, and pH. Under optimal conditions, the biosensor displayed the maximum current responses within 10 s at the low applied potential of -0.10 V vs. the internal Ag/AgCl reference. The biosensor exhibited a linear response from 1.0 to 2.0 mM of aspartate concentrations with a sensitivity of 0.8 µA mM-1 cm-2 and a lower detection limit of approximately 500 µM. Moreover, the biosensor possessed high reproducibility, good selectivity, and efficient storage stability.
RESUMEN
Laccase is a copper-containing enzyme that does not require hydrogen peroxide as a co-substrate or additional cofactors for an enzymatic reaction. Nanomaterials of various chemical structures are usually applied to the construction of enzyme-based biosensors. Metals, metal oxides, semiconductors, and composite NPs perform various functions in electrochemical transformation schemes as a platform for the enzyme immobilization, a mediator of an electron transfer, and a signal amplifier. We describe here the development of amperometric biosensors (ABSs) based on laccase and redox-active micro/nanoparticles (hereafter-NPs), which were immobilized on a graphite electrode (GE). For this purpose, we isolated a highly purified enzyme from the fungus Trametes zonatus, and then synthesized bi- and trimetallic NPs of noble and transition metals, as well as hexacyanoferrates (HCF) of noble metals; these were layered onto the surfaces of GEs. The electroactivity of many of the NPs immobilized on the GEs was characterized by cyclic voltammetry (CV) experiments. The most effective mediators of electron transfer were selected as the platform for the development of laccase-based ABSs. As a result, a number of catechol-sensitive ABSs were constructed and characterized. The laccase/CuCo/GE was demonstrated to possess the highest sensitivity to catechol (4523 A·M-1·m-2) among the tested ABSs. The proposed ABSs may be promising for the analysis of phenolic derivatives in real samples of drinking water, wastewater, and food products.
Asunto(s)
Técnicas Biosensibles , Agua Potable , Grafito , Nanoestructuras , Catecoles/análisis , Cobre/análisis , Electrodos , Enzimas Inmovilizadas/química , Grafito/química , Peróxido de Hidrógeno/análisis , Lacasa/química , Oxidación-Reducción , Trametes/metabolismo , Aguas ResidualesRESUMEN
The search for new nanoscale materials with predictable properties to target the timely and fast detection of toxic components in wastewater is one of the most promising directions of modern biosensorics. We have shown that TiO2 nanoparticles modified with sulfur significantly improve the main operational parameters of laccase-based electrodes when compared with controls. The nanoparticle samples were labeled as TiO2S(0.75), TiO2S(1.5), and TiO2S(3.0), in which the numbers in parentheses refer to the quantity of H2SO4 (mL) used in the synthesis. The nanoparticles and enzyme were immobilized by means of Nafion film formed on a carbon rod electrode. It was shown that the modification of Nafion film by TiO2 or TiO2S(1.5) nanoparticles does not affect the size of the nanocavities and defect structure of the main polymer matrix as revealed by positron annihilation spectroscopy. It testifies that the structural-morphological difference between the film samples is rather small, and the improving of the sensor operational parameters for TiO2S(1.5)-based laccase electrodes is connected only with the impact of sulfur doping, but not the difference in membrane properties. The developed bioelectrodes were tested for phenol analysis in real communal wastewater samples spiked with these analytes, demonstrating the high accuracy of the assay.
Asunto(s)
Técnicas Biosensibles , Nanopartículas , Técnicas Biosensibles/métodos , Electrodos , Enzimas Inmovilizadas/química , Lacasa/química , Azufre , Titanio , Aguas ResidualesRESUMEN
The availability of fast and non-expensive analytical methods for the determination of widespread interest analytes such as glucose is an object of large relevance; this is so not only in the field of analytical chemistry, but also in medicinal and in food chemistry. In this context, electrochemical biosensors have been proposed in different arrangements, according to the mode of electron transfer between the bioreceptor and the electrode. An efficient immobilization of an enzyme on the electrode surface is essential to assure satisfactory analytical performances of the biosensor in terms of sensitivity, limit of detection, selectivity, and linear range of employment. Here, we report the use of a thiophene monomer, (2,5-di(2-thienyl)thieno [3,2-b]thiophene (dTT-bT), as a precursor of an electrogenerated conducting film to immobilize the glucose oxidase (GOx) enzyme on Pt, glassy carbon (GC), and Au electrode surfaces. In addition, the polymer film electrochemically synthetized on a glassy carbon electrode was modified with graphene oxide before the deposition of GOx; the analytical performances of both the arrangements (without and with graphene oxide) in the glucose detection were compared. The biosensor containing graphene oxide showed satisfactory values of linear dynamic range (1.0-10 mM), limit of detection (0.036 mM), and sensitivity (9.4 µA mM-1 cm-2). Finally, it was tested in the determination of glucose in fruit juices; the interference from fructose, saccharose, and ascorbic acid was evaluated.
RESUMEN
The regulation of nervous and cardiovascular systems and some brain-related behaviors, such as stress, panic, anxiety, and depression, are strictly dependent on the levels of the main catecholamines of clinical interest, dopamine (DA), epinephrine (EP), and norepinephrine (NEP). Therefore, there is an urgent need for a reliable sensing device able to accurately monitor them in biological fluids for early diagnosis of the diseases related to their abnormal levels. In this paper, we present the first tyrosinase (Tyr)-based biosensor based on chitosan nanoparticles (ChitNPs) for total catecholamine (CA) detection in human urine samples. ChitNPs were synthetized according to an ionic gelation process and successively characterized by SEM and EDX techniques. The screen-printed graphene electrode was prepared by a two-step drop-casting method of: (i) ChitNPS; and (ii) Tyr enzyme. Optimization of the electrochemical platform was performed in terms of the loading method of Tyr on ChitNPs (nanoprecipitation and layer-by-layer), enzyme concentration, and enzyme immobilization with and without 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS) as cross-linking agents. The Tyr/EDC-NHS/ChitNPs nanocomposite showed good conductivity and biocompatibility with Tyr enzyme, as evidenced by its high biocatalytic activity toward the oxidation of DA, EP, and NEP to the relative o-quinone derivatives electrochemically reduced at the modified electrode. The resulting Tyr/EDC-NHS/ChitNPs-based biosensor performs interference-free total catecholamine detection, expressed as a DA concentration, with a very low LOD of 0.17 µM, an excellent sensitivity of 0.583 µA µM-1 cm-2, good stability, and a fast response time (3 s). The performance of the biosensor was successively assessed in human urine samples, showing satisfactory results and, thus, demonstrating the feasibility of the proposed biosensor for analyzing total CA in physiological samples.
Asunto(s)
Técnicas Biosensibles , Quitosano , Nanopartículas , Técnicas Biosensibles/métodos , Catecolaminas , Quitosano/química , Técnicas Electroquímicas/métodos , Electrodos , Humanos , Monofenol Monooxigenasa , Nanopartículas/químicaRESUMEN
According to the World Health Organization, about 422 million people worldwide have diabetes, with 1.5 million deaths directly attributed each year. Therefore, there is still a need to effectively monitor glucose in diabetic patients for proper management. Recently, wearable patches based on microneedle (MN) sensors provide minimally invasive analysis of glucose through the interstitial fluid (ISF) while exhibiting excellent correlation with blood glucose. Despite many advances in wearable electrochemical sensors, long-term stability and continuous monitoring remain unsolved challenges. Herein, we present a highly stable electrochemical biosensor based on a redox mediator bilayer consisting of Prussian blue and iron-nickel hexacyanoferrate to increase the long-term stability of the readout coupled with a hollow MN array as a sampling unit for ISF uptake. First, the enzymatic biosensor is developed by using affordable screen-printed electrodes (SPE) and optimized for long-term stability fitting the physiological range of glucose in ISF (i.e., 2.5-22.5 mM). In parallel, the MN array is assessed for minimally invasive piercing of the skin. Subsequently, the biosensor is integrated with the MN array leaving a microfluidic spacer that works as the electrochemical cell. Interestingly, a microfluidic channel connects the cell with an external syringe to actively and rapidly withdraw ISF toward the cell. Finally, the robust MN sensing patch is characterized during in vitro and ex vivo tests. Overall, affordable wearable MN-based patches for the continuous monitoring of glucose in ISF are providing an advent in wearable devices for rapid and life-threatening decision-making processes.