The genome sequence of the beech bark beetle, Taphrorychus bicolor (Herbst, 1793).

We present a genome assembly from an individual male Taphrorychus bicolor (the beech bark beetle; Arthropoda; Insecta; Coleoptera; Curculionidae). The genome sequence is 575.2 megabases in span. Most of the assembly is scaffolded into 12 chromosomal pseudomolecules, including the X and Y sex chromosomes. The mitochondrial genome has also been assembled and is 15.46 kilobases in length. Gene annotation of this assembly on Ensembl identified 24,125 protein coding genes.

Physical, Mechanical, and Flammability Properties of Wood-Plastic Composites (WPC) Containing Beech-Wood Flour and Flame-Retardant Additives.

This study aims to develop a recyclable, economical, and flame-retardant composite material using polypropylene, beech flour, tetrabromobisphenol A bis (TBBPA), and antimony trioxide (ATO). Flame-retardant additives (TBBPA and ATO) were initially added into polypropylene at different rates, and masterbatch (MB) samples were produced by the extrusion method. Subsequently, different percentages of wood flour (10%, 15%, 20%, 25%, and 30%) along with 60% MB were added to the polypropylene to create wood-polymer composites (WPC) using the injection method. The TBBPA, ATO, and wood flour were introduced through side-feeding hoppers during injection to ensure a homogeneous distribution within the WPC. Physical, thermal, and mechanical tests were conducted on the WPC samples. Additionally, TGA, FTIR, and SEM analyses were performed. The results indicated that the optimal ratios for TBBPA and ATO additives were 20% and 10%, respectively. It was observed that increasing the wood flour content in the WPC samples led to enhanced density, water absorption, hardness, impact, and abrasion resistance. Conversely, MFI, bending strength, and tensile strength decreased with higher wood flour content. It was observed that WPC samples exhibited flame resistance up to 725 °C. The produced WPC materials can be used in flooring applications, interior furniture, decorative wall panels, and aesthetic structural elements due to their fire behavior, good mechanical properties, low water-absorption rates, and aesthetic appearance.

Tensile and Bending Strength of Birch and Beech Lamellas Finger Jointed with Conventional and Newly Developed Finger-Joint Profiles.

In this study, the tensile and bending strength of birch and beech lamellas finger jointed with conventional (Standard) and newly developed finger-joint profiles (New) are presented. Polyurethane (PUR), Melamine-Urea-Formaldehyde (MUF) and Phenol-Resorcinol-Formaldehyde (PRF) adhesive systems were used to bond the finger joints. The objective of the New profiles was to reduce the stress concentrations within the finger joint by cutting the cross-grooved fingers perpendicular to the main orientation of the finger-joint profile. In the first trials of the development, larger cross-grooved fingers were cut with the aim to improve the stress distribution and to reinforce the finger joint by filling gaps in the finger joint with adhesive. As the study progressed, initial optimisations of the New profile were made. Smaller cross-grooved fingers were cut as it was assumed that they are beneficial for the manufacturing and integrity of the New profile. In combination with the MUF adhesive system, the New profile achieved the highest increase in the bending and tensile strengths compared to the Standard profile. In addition to the increased strength, other advantages such as reduced cracking in the finger joint were observed when using the New profile. The high strength and stiffness of hardwoods or other high-performance materials used in timber construction can probably be better exploited in combination with the New profile. Further tests will be carried out by considering different configurations of the New profile and different materials.

Molecular identification of Shiitake (Lentinula edodes), analysis and production of beta-glucan using beech wood sawdust waste.

Lentinula edodes has the ability to grow and produce bioactive compounds on industrial by-products. This study aimed to produce B-glucan of cell wall Shiitake on Beechwood Sawdust (BWS) through a two-step procedure, which included fermentation and B-glucan extraction and purification. Shiitake mushrooms are cultivated by solid-state fermentation (SSF) using the Jamas method to increase the purity of B-glucan. The fermented substrate was first separated and then hydrolyzed by sodium hydroxide (NaOH) (10 M, 1 M), followed by acid hydrolysis extraction. The structure and purity of B-glucan were confirmed by FTIR, NMR, and AFM spectroscopy. The fungus used was molecularly identified by the 18 s rRNA method. Shiitake mushroom was produced by SSF using BWS and high purity ß-glucan was extracted from the produced polysaccharide in the amount of 67.33 mg/g. FTIR, NMR, and AFM analyses proved the production of beta-glucan, and based on molecular identification, it was determined that the mushroom used was Lentinula edodes. The results obtained show that SSF is a valuable technology for the production of biomass and polysaccharides by utilizing the strain of L. edodes. To the best of our knowledge, the yield reported is the highest by the strain of L. edodes using SSF.

Impact of various microplastics on the morphological characteristics and nutrition of the young generation of beech (Fagus sylvatica L.).

Microplastics have the capacity to accumulate in soil due to their high resistance to degradation, consequently altering soil properties and influencing plant growth. This study focused on assessing the impact of various types and doses of microplastics on beech seedling growth. In our experiment, we used polypropylene and styrene granules with diameter of 4.0 mm in quantities of 2.5% and 7%. The hypothesis was that microplastics significantly affect seedlings' nutritional status and growth characteristics. The research analysed seedlings' nutrition, root morphological features, above-ground growth, and enzymatic activity in the substrate. Results confirmed the importance of microplastics in shaping the nutritional status of young beech trees. Microplastic type significantly impacted N/P and Ca/Mg stoichiometry, while microplastic quantity influenced Ca/Al and Ca+K+Mg/Al stoichiometry. Notably, only in the case of root diameter were significantly thicker roots noted in the control variant, whereas microplastics played a role in shaping the leaves' characteristics of the species studied. The leaf area was significantly larger in the control variant compared to the variant with polypropylene in the amount of 2.5% and styrene in the amount of 7%. Additionally, the study indicates a significant impact of microplastics on enzyme activity. In the case of CB and SP, the activity was twice as high in the control variant compared to the variants with microplastics. In the case of BG, the activity in the control variant was higher in relation to the variants used in the experiment. Research on the impact of microplastics on the growth of beech seedlings is crucial for enhancing our understanding of the effects of environmental pollution on forest ecosystems. Such studies are integral in shaping forestry management practices and fostering a broader public understanding of the ecological implications of plastic pollution.

Firewood as a tool to valorize meat: A sensory and instrumental approach to grilled veal, lamb, and pork meat.

Two firewood species (beech and olive) were used for grilling three meat types (lamb, pork, and veal) to assess their influence on the sensorial properties of meat. A multimethod approach was adopted, including sensory evaluation with consumers and two analytical techniques to characterize the volatile fraction (Solid-Phase Micro-Extraction Gas Chromatography-Mass Spectrometry [SPME-GC/MS] and electronic nose [e-nose]). The sensory session included three pairwise preference tests (one for each type of meat), an overall liking test, a Rate-All-That-Apply test, and a questionnaire on the interest and perceived value of using sustainably certified firewood in food preparation. The firewood species significantly affected the perception of a few crucial attributes. In particular, olive wood increased the roasted meat flavor perception in lamb and veal, while beech wood increased the perceived intensity of a vegetable/herbaceous flavor in veal. No effect of firewood was observed on preference within each pair of meat samples. Lamb was the significantly most liked meat by consumers, followed by pork; veal was the least liked meat type. Positive and negative drivers of preference were discussed. 36 volatile organic compounds were identified from SPME-GC/MS in meats. Congruently with sensory data, the two veal samples showed a greater distance in terms of volatile composition. Relative distances among samples on maps obtained from SPME-GC/MS and the e-nose were similar. This multi-method approach innovatively showed the potential of using firewood as a 'gastronomic' tool to sensorially characterize and valorize cooked meat.

Intraspecific variation in photosynthetic thermal acclimation in Fagus crenata seedlings from two populations growing at different elevations in northern Japan.

Plants can acclimate their photosynthesis to growth temperature, but the contribution of local adaptation to intraspecific variation in thermal acclimation of photosynthesis is not fully understood. Here, we experimentally investigated the photosynthetic thermal acclimation in Fagus crenata Blume seedlings from two populations growing at different elevations and temperature regimes (low- and high-elevation sites) in northern Japan. We acclimated seedlings for 14 to 23 days at daytime temperatures of either 22 °C (control) or 27 °C (warm treatment) and obtained photosynthetic temperature-response curves in the range of 19 to 32 °C. The optimum temperature of photosynthesis (Topt) was ~0.6 °C higher in seedlings acclimated at 27 °C than in those acclimated at 22 °C, and it was significantly lower in seedlings with higher stomatal sensitivity to leaf-to-air vapor pressure deficit than in those with lower sensitivity. The effects of warm treatment, population and treatment-population interaction on Topt were not significant in the two-way analysis of variance, but the effect of treatment became significant when stomatal sensitivity to leaf-to-air vapor pressure deficit was included as a covariate in the model. Structural equation modeling indicated that seedlings with lower root biomass had lower Topt because of the high stomatal sensitivity to leaf-to-air vapor pressure deficit. Structural equation modelling also indicated that the way of shifting the Topt differed between the two populations: seedlings from a high-elevation site depended on decreasing photosynthetic rates at low temperatures for the increase in Topt but seedlings from a low-elevation site did not. We suggest that the difference in thermal acclimation of photosynthesis between the two populations may reflect adaptation to different climate regimes and that belowground traits should be considered when investigating thermal acclimation capacity, especially in seedlings.

Collimonas rhizosphaerae sp. nov., a novel species isolated from the beech rhizosphere.

Bacterial strain H4R21T was isolated from beech rhizosphere soil sampled in the forest experimental site of Montiers (Meuse, France). It effectively weathers minerals, hydrolyses chitin and produces quorum sensing signal molecules. The strain is aerobic and Gram-stain-negative. Phylogenetic analysis based on its 16S rRNA gene sequence indicated that strain H4R21T belongs to the genus Collimonas with high sequence similarity to C. arenae Ter10T (99.38 %), C. fungivorans Ter6T(98.97 %), C. pratensis Ter91T (98.76 %), C. humicola RLT1W51T (98.46 %) and C. silvisoli RXD178 T (98.46 %), but less than 98 % similarity to other strains of the genus Collimonas. The predominant quinone in H4R21T is ubiquinone-8 (Q8). The major polar lipids are diphosphatidylglycerol, phosphatidylethanolamine, diphosphatidylglycerol, phosphatidylglycerol and lipid. The major fatty acids identified were C12 : 0, C12:0 3-OH, C16  :  0 and C17:0 cyclo. The digital DNA G+C content of the genomic DNA was 59.5 mol%. Furthermore, the strain could be clearly distinguished from its closely related type strains by a combination of phylogenomic and in silico DNA-DNA hybridization results, and phenotypic characteristics. Therefore, strain H4R21T represents a novel species within the genus Collimonas, for which the name Collimonas rhizosphaerae sp. nov. is proposed, with strain H4R21T (=CFBP 9203T=DSM 117599T) as the type strain.

Coping with extremes: Responses of Quercus robur L. and Fagus sylvatica L. to soil drought and elevated vapour pressure deficit.

Climate change, particularly droughts and heat waves, significantly impacts global photosynthesis and forest ecosystem sustainability. To understand how trees respond to and recover from hydrological stress, we investigated the combined effects of soil moisture and atmospheric vapour pressure deficit (VPD) on seedlings of the two major European broadleaved tree species Fagus sylvatica (FS) and Quercus robur (QR). The experiment was conducted under natural forest gap conditions, while soil water availability was strictly manipulated. We monitored gas exchange (net photosynthesis, stomatal conductance and transpiration rates), nonstructural carbohydrates (NSC) concentration in roots and stomatal morphometry (size and density) during a drought period and recovery. Our comparative empirical study allowed us to distinguish and quantify the effects of soil drought and VPD on stomatal behavior, going beyond theoretical models. We found that QR conserved water more conservatively than FS by reducing transpiration and regulating stomatal conductance under drought. FS maintained higher stomatal conductance and transpiration at elevated VPD until soil moisture became critically low. QR showed higher intrinsic water use efficiency than FS. Stomata density and size also likely played a role in photosynthetic rate and speed of recovery, especially since QR with its seasonal adjustments in stomatal traits (smaller, more numerous stomata in summer leaves) responded and recovered faster compared to FS. Our focal species showed different responses in NSC content under drought stress and recovery, suggesting possible different evolutionary pathways in coping with stress. QR mobilized soluble sugars, while FS relied on starch mobilization to resist drought. Although our focal species often co-occur in mixed forests, our study showed that they have evolved different physiological, morphological and biochemical strategies to cope with drought stress. This suggests that ongoing climate change may alter their competitive ability and adaptive potential in favor of one of the species studied.

Effects of the nematode Litylenchus crenatae subsp. mccannii and beech leaf disease on leaf fungal and bacterial communities on Fagus grandifolia (American beech).

Beech leaf disease (BLD) is a newly emerging disease in North America that affects American beech (Fagus grandifolia). It is increasingly recognized that BLD is caused by a subspecies of the anguinid nematode Litylenchus crenatae subsp. mccannii (hereafter L. crenatae), which is likely native to East Asia. How nematode infestation of leaves affects the leaf microbiome and whether changes in the microbiome could contribute to BLD symptoms remain uncertain. In this study, we examined bacterial and fungal communities associated with the leaves of F. grandifolia across nine sites in Ohio and Pennsylvania that were either symptomatic or asymptomatic for BLD and used qPCR to measure relative nematode infestation levels. We found significantly higher levels of infestation at sites visibly symptomatic for BLD. Low levels of nematode infestation were also observed at asymptomatic sites, which suggests that nematodes can be present without visible symptoms evident. Bacterial and fungal communities were significantly affected by sampling site and symptomology, but only fungal communities were affected by nematode presence alone. We found many significant indicators of both bacteria and fungi related to symptoms of BLD, with taxa generally occurring in both asymptomatic and symptomatic leaves, suggesting that microbes are not responsible for BLD but could act as opportunistic pathogens. Of particular interest was the fungal genus Erysiphe, which is common in the Fagaceae and is reported to overwinter in buds-a strategy consistent with L. crenatae. The specific role microbes play in opportunistic infection of leaves affected by L. crenatae will require additional study. IMPORTANCE: Beech leaf disease (BLD) is an emerging threat to American beech (Fagus grandifolia) and has spread quickly throughout the northeastern United States and into southern Canada. This disease leads to disfigurement of leaves and is marked by characteristic dark, interveinal banding, followed by leaf curling and drop in more advanced stages. BLD tends to especially affect understory leaves, which can lead to substantial thinning of the forest understory where F. grandifolia is a dominant tree species. Understanding the cause of BLD is necessary to employ management strategies that protect F. grandifolia and the forests where it is a foundation tree species. Current research has confirmed that the foliar nematode Litylenchus crenatae subsp. mccannii is required for BLD, but whether other organisms are involved is currently unknown. Here, we present a study that investigated leaf-associated fungi and bacteria of F. grandifolia to understand more about how microorganisms may contribute to BLD.

Response of beech and fir to different light intensities along the Carpathian and Dinaric Mountains.

Predicting global change mitigations based on environmental variables, like temperature and water availability, although yielding insightful hypothesis still lacks the integration of environmental responses. Physiological limits should be assessed to obtain a complete representation of a species' fundamental niche. Detailed ecophysiological studies on the response of trees along the latitudinal gradient are rare. They could shed light on the behaviour under different light intensities and other studied traits. The forests of the Dinaric Mountains and the Carpathians represent the largest contiguous forest complexes in south-eastern Europe. In uneven-aged Carpathian (8 plots) and Dinaric Mountain (11 plots) forests, net assimilation (Amax) and maximum quantum yield (Φ) were measured for beech and fir in three predefined light intensity categories according to the indirect site factor (ISF%) obtained by the analysis of hemispherical photographs in managed and old growth forests, all located above 800 m a.s.l. The measurements were carried out under fixed environmental conditions in each light category per plot for three consecutive years. Data from the last 50-year average period from the CRU TS 4.01 dataset were used for the comparison between Amax, Φ, and climate. The highest Φ for beech were observed in the central part of the Dinaric Mountains and in the south westernmost and northwesternmost part of the Carpathians for both beech and fir, while they were highest for fir in the Dinaric Mountains in the northwesternmost part of the study area. The Φ-value of beech decreased in both complexes with increasing mean annual temperature and was highest in the open landscape. For fir in the Carpathians, Φ decreased with increasing mean annual temperature, while in the Dinaric Mountains it increased with higher temperature and showed a more scattered response compared to the Carpathians. Short-term ecophysiological responses of beech and fir were consistent to long-term radial growth observations observed on same locations. The results may provide a basis and an indication of the future response of two tree species in their biogeographical range to climate change in terms of competitiveness, existence and consequently forest management decisions.

Niche dimensions in soil oribatid mite community assembly under native and introduced tree species.

Forest soils are a critical component of terrestrial ecosystems and host a large number of animal decomposer species. One diverse and abundant decomposer taxon is oribatid mites (Acari: Oribatida), whose species composition varies with forest type and tree species composition. We used functional traits that indicate different niche dimensions, to infer assembly processes of oribatid mite communities in monocultures and mixed forests of native and introduced tree species. We found that coexisting species differed more in the resource-related niche dimension, i.e., reproductive mode and trophic guild, than in the morphological dimension, e.g., body length and width, sclerotization and concealability. These results suggest that both filtering and partitioning processes structure oribatid mite communities. In native European beech forests, but not in non-native Douglas fir forests, oribatid mites were mainly structured by filtering processes acting via traits related both to environmental tolerance and to resources. Furthermore, oribatid mite trait diversity, but not phylogenetic diversity, differed significantly between monocultures and mixed forests, demonstrating that multidimensional diversity indices provide additional information on soil biodiversity. Overall, the study provides evidence that traits representing different niche dimensions need to be considered for understanding assembly processes in soil animal communities and thereby soil biodiversity.

Phenological response of European beech (Fagus sylvatica L.) to climate change in the Western Carpathian climatic-geographical zones.

Introduction: The paper analyzes the results of 26 years (1996-2021) of phenological observations of the vegetative organs of European beech (Fagus sylvatica L.) in the Western Carpathians. It evaluates the influence of the heterogeneity of this territory, including relief and elevation, based on climatic-geographical types. Methods: Phenological stages, including leaf unfolding, full leaves, leaf coloring, and leaf fall, were monitored at 40 phenological stations across eight elevation zones. The study assesses trends in the occurrence of phenological stages, the length of the growing season, and phenological elevation gradients. Results: The results indicate a statistically significant earlier onset of spring phenological phases and delay in autumn phases, resulting in an average extension of the beech growing season by 12 days. Our findings confirm that the lengthening of the growing season due to warming, as an expression of climate change, is predominantly attributed to the warming in the spring months. The detected delayed onset of autumn phenophases was not due to warming in the autumn months, but other environmental factors influence it. The trend of elongation of the growing season (p<0.01) is observed in all elevation zones, with a less significant trend observed only in zones around 400 and 600 m a.s.l, signaling changes in environmental conditions across most of the elevation spectrum. Moreover, the heterogeneity of climatic-geographical types within each elevation zone increases the variability in the duration of the growing season for sites with similar elevations. By extending the growing season, it is assumed that the beech area will be changed to locations with optimal environmental conditions, especially in terms of adverse climatic events (late spring frosts, drought) during the growing season. The phenological elevation gradients reveal an earlier onset of 2.2 days per 100 m for spring phenophases and a delay of 1.1-2.9 days per 100 m for autumn phenophases. Discussion: These findings highlight the specific environmental conditions of European beech in the Western Carpathians and their potential for anticipating changes in its original area. Additionally, these observations can aid in forecasting the further development of phenological manifestations related to climate change.

Molded Plywood with Proportions of Beech Bark in Adhesive Mixtures: Production on an Industrial Scale.

Molded plywood is used for furniture components such as seats, backrests, or integral seat shells, and it must be durable and harmless to health. Molded plywood is made with urea-formaldehyde (UF) adhesives; therefore, the issue of the fillers used in them is important. The potential of using ground beech (Fagus sylvatica L.) bark as an eco-friendly additive in UF adhesives for molded plywood manufacturing was investigated in this work. Wheat flour was used as a reference filler. The beech bark (BB) level as a filler was 10%, a value verified under laboratory conditions. Nine-layer flat and molded plywood were produced under industrial conditions from beech veneers bonded with a UF adhesive mixture. The mechanical (bending strength and bonding quality) and physical (swelling and absorbency values after 2 and 24 h) properties of the industrially fabricated molded plywood were evaluated and compared with the European standard requirements (EN 310 and EN 314-2). The mechanical properties of the molded plywood with the addition of BB in the adhesive mixture were acceptable and met these standards' requirements. The positive effect of BB in the UF adhesive mixture on a reduction in formaldehyde emissions from the molded plywood was also confirmed. BB, considered to be wood-processing industry waste or a by-product, has significant potential to be used as a filler in UF resins for molded plywood production, providing an environmentally friendly, inexpensive solution for the industrial valorization of bark as a bio-based formaldehyde scavenger.

Root and rhizosphere contribution to the net soil COS exchange.

Background and aims: Partitioning the measured net ecosystem carbon dioxide (CO2) exchange into gross primary productivity (GPP) and ecosystem respiration remains a challenge, which scientists try to tackle by using the properties of the trace gas carbonyl sulfide (COS). Its similar pathway into and within the leaf makes it a potential photosynthesis proxy. The application of COS as an effective proxy depends, among other things, on a robust inventory of potential COS sinks and sources within ecosystems. While the soil received some attention during the last couple of years, the role of plant roots is mostly unknown. In our study, we investigated the effects of live roots on the soil COS exchange. Methods: An experimental setup was devised to measure the soil and the belowground plant parts of young beech trees observed over the course of 9 months. Results: During the growing season, COS emissions were significantly lower when roots were present compared to chambers only containing soil, while prior to the growing season, with photosynthetically inactive trees, the presence of roots increased COS emissions. The difference in the COS flux between root-influenced and uninfluenced soil was fairly constant within each month, with diurnal variations in the COS flux driven primarily by soil temperature changes rather than the presence or absence of roots. Conclusion: While the mechanisms by which roots influence the COS exchange are largely unknown, their contribution to the overall ground surface COS exchange should not be neglected when quantifying the soil COS exchange. Supplementary Information: The online version contains supplementary material available at 10.1007/s11104-023-06438-0.

Leaf gene expression trajectories during the growing season are consistent between sites and years in American beech.

Transcriptomics provides a versatile tool for ecological monitoring. Here, through genome-guided profiling of transcripts mapping to 33 042 gene models, expression differences can be discerned among multi-year and seasonal leaf samples collected from American beech trees at two latitudinally separated sites. Despite a bottleneck due to post-Columbian deforestation, the single nucleotide polymorphism-based population genetic background analysis has yielded sufficient variation to account for differences between populations and among individuals. Our expression analyses during spring-summer and summer-autumn transitions for two consecutive years involved 4197 differentially expressed protein coding genes. Using Populus orthologues we reconstructed a protein-protein interactome representing leaf physiological states of trees during the seasonal transitions. Gene set enrichment analysis revealed gene ontology terms that highlight molecular functions and biological processes possibly influenced by abiotic forcings such as recovery from drought and response to excess precipitation. Further, based on 324 co-regulated transcripts, we focused on a subset of GO terms that could be putatively attributed to late spring phenological shifts. Our conservative results indicate that extended transcriptome-based monitoring of forests can capture diverse ranges of responses including air quality, chronic disease, as well as herbivore outbreaks that require activation and/or downregulation of genes collectively tuning reaction norms maintaining the survival of long living trees such as the American beech.

The Impact of Phenological Gaps on Leaf Characteristics and Foliage Dynamics of an Understory Dwarf Bamboo, Sasa kurilensis.

Phenological gaps exert a significant influence on the growth of dwarf bamboos. However, how dwarf bamboos respond to and exploit these phenological gaps remain enigmatic. The light environment, soil nutrients, leaf morphology, maximum photosynthetic rate, foliage dynamics, and branching characteristics of Sasa kurilensis were examined under the canopies of Fagus crenata and Magnolia obovata. The goal was to elucidate the adaptive responses of S. kurilensis to phenological gaps in the forest understory. The findings suggest that phenological gaps under an M. obovata canopy augment the available biomass of S. kurilensis, enhancing leaf area, leaf thickness, and carbon content per unit area. However, these gaps do not appreciably influence the maximum photosynthetic rate, total leaf number, leaf lifespan, branch number, and average branch length. These findings underscore the significant impact of annually recurring phenological gaps on various aspects of S. kurilensis growth, such as its aboveground biomass, leaf morphology, and leaf biochemical characteristics. It appears that leaf morphology is a pivotal trait in the response of S. kurilensis to phenological gaps. Given the potential ubiquity of the influence of phenological gaps on dwarf bamboos across most deciduous broadleaf forests, this canopy phenomenon should not be overlooked.

Moths in space: The below-canopy structure of forest drives abundance and mobility-related traits of moth communities.

The distribution of species is primarily driven by the availability of trophic resources. In a given forest type, insects trophically related to the dominant tree are expected to be evenly distributed due to the abundance of their foodplant. However, their distribution is also influenced by complex relationships with abiotic and biotic parameters such as available space, predatory pressure, and morphometric traits. In this study, we investigated how the three-dimensional structure of space below the canopy may affect the composition of nocturnal lepidoptera communities. To synthesise the complexity of the dispersal behaviour of these insects, we evaluated easily measurable traits such as wingspan and the presence of tympanic organs, both connected to their mobility and thus potentially influenced by the structure of the available flight space. The study was conducted in the Sila National Park (Italy), where 12 sampling sites were selected in pine forests and an additional 12 in beech forests. Forest spatial structure was investigated using a portable terrestrial laser scanner. Moths were sampled monthly using light traps from May to October in both 2019 and 2020. Among measured forest traits, we observed that the space above three meters from the ground is the only factor influencing community composition. Larger species with tympanic organs prefer environments with less space below tree canopies. Our findings could be the starting point for future studies that investigate a potential defence strategy of moths against bats, as tympanate and larger species not only actively avoid chiropter predation but could also choose denser forests because of a lower bat activity. Moths' distribution and community composition thus appear to be significantly shaped by the spatial structure of forests.

Variations in Proline Content, Polyamine Profiles, and Antioxidant Capacities among Different Provenances of European Beech (Fagus sylvatica L.).

International provenance trials are a hot topic in forestry, and in light of climate change, the search for more resilient beech provenances and their assisted migration is one of the challenges of climate-smart forestry. The main aim of the study was to determine intraspecific variability in European beech (Fagus sylvatica L.) among 11 beech provenances according to total antioxidant capacities estimated by various assays, such as DPPH (2,2-diphenyl-1-picrylhydrazyl), ABTS (2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic) acid), FRAP (ferric reducing antioxidant power) assay, and radical scavenging capacity against nitric oxide (RSC-NO assays), as well as osmolyte content, primarily individual polyamines (putrescine, spermidine, and spermine), and free proline content. Polyamine amounts were quantified by using HPLC coupled with fluorescent detection after dansylation pretreatment. The highest values for radical scavenger capacity assays (ABTS, DPPH, and FRAP) were measured in the German provenances DE47 and DE49. Also, the highest NO inhibition capacity was found in the provenance DE49, while the highest content of proline (PRO), total phenolic content (TPC), and total flavonoid content (TFC) was recorded in DE47. The Austrian AT56 and German provenance DE49 were most abundant in total polyamines. This research underlines the importance of the application of common antioxidant assays as well as osmolyte quantification as a criterion for the selection of climate-ready beech provenances for sustainable forest management.

Predicted and Experimental Bending Behaviour of Glulam Bonded by RPF Adhesive.

In this study, alder, spruce, and beech woods were used for homogeneous symmetric, inhomogeneous symmetric (combined) and inhomogeneous non-symmetric glued laminated timber (glulam) beams glued with resorcinol phenol formaldehyde (RPF) adhesive. The aim of this paper is to determine and compare the modulus of elasticity of glulam beams using three methods, i.e., analytical calculation, numerical model (FEM) and experimental testing. As an additional characteristic, the bending strength (MOR) of the beams was determined during experimental testing. Analytical calculation was used to calculate the modulus of elasticity (MOE) of glued laminated timber based on the knowledge of the modulus of elasticity of solid wood and to estimate the location of the neutral axis during bending. According to calculations, for symmetrical combinations, the deviation from the real neutral axis does not exceed 5%. In the case of the modulus of elasticity, the deviation is an average of 4.1% from that of the actual measured beams. The numerical model includes finite element modelling, where the deflection of the modelled beams can be calculated with a deviation of up to 10%. The last method was experimental testing of glued beams using four-point bending, in which, among homogeneous beams, beech glulam beams achieved the highest MOE and MOR, while alder glulam beams achieved the lowest. The combination of wood species resulted in an increase in both MOE and MOR compared to homogeneous spruce and alder beams.