Spirobipyridine Ligand Enabled Iridium-Catalyzed Site-Selective C-H Activation via Non-Covalent Interactions.

The selective borylation of specific C-H bonds in organic synthesis remains a formidable challenge. In this study, we present a novel spirobipyridine ligand that features a binaphthyl backbone. This ligand facilitates the iridium-catalyzed selective C-H borylation of benzene derivatives. The ligand is designed with "side-arm-wall" substituents that allow vicinal di- or multi-substituted benzene derivatives to approach metal center and effectively block other reactive sites by non-covalent interactions with substrates. The effectiveness of this strategy is demonstrated by the successful selective distal C-H activation of various alkaloids and its broad compatibility with functional groups.

Catalytic Undirected Meta-Selective C-H Borylation of Metallocenes.

Metallocenes are privileged backbones in the fields of synthetic chemistry, catalysis, polymer science, etc. Direct C-H functionalization is undoubtedly the simplest approach for tuning the properties of metallocenes. However, owing to the presence of multiple identical C(sp2 )-H sites, this protocol often suffers from low reactivity and selectivity issues, especially for the regioselective synthesis of 1,3-difunctionalized metallocenes. Herein, an efficient iridium-catalyzed meta-selective C-H borylation of metallocenes is reported. With no need of preinstalled directing groups, this approach enables a rapid synthesis of various boronic esters based on benzoferrocenes, ferrocenes, ruthenocene, and related half sandwich complex. A broad range of electron-deficient and -rich functional groups are all compatible with the process. Notably, C-H borylation of benzoferrocenes takes place exclusively at the benzene ring, which is likely ascribed to the shielding effect of pentamethylcyclopentadiene. The synthetic utility is further demonstrated by easy scalability to gram quantities, the conversion of boron to heteroatoms including N3 , SePh, and OAc, as well as diverse cross-coupling reactions.

Amide directed iridium C(sp3)-H borylation catalysis with high N-methyl selectivity.

A bidentate monoanionic ligand system was developed to enable iridium catalyzed C(sp3)-H activation borylation of N-methyl amides. Borylated amides were obtained in moderate to good isolated yields, and exclusive mono-borylation allowed the amide to be the limiting reagent. Selectivity for C(sp3)-H activation was demonstrated in the presence of sterically available C(sp3)-H bonds. Competitive kinetic isotope studies revealed a large primary isotope effect, implicating C-H activation as the rate limiting step.

Steric Shielding Effects Induced by Intramolecular C-H⋯O Hydrogen Bonding: Remote Borylation Directed by Bpin Groups.

Regioselectivities in catalytic C-H borylations (CHBs) have been rationalized using simplistic steric models and correlations with nuclear magnetic resonance (NMR) chemical shifts. However, regioselectivity can be significant for important substrate classes where none would be expected from these arguments. In this study, intramolecular hydrogen bonding (IMHB) can lead to steric shielding effects that can direct Ir-catalyzed CHB regiochemistry. Bpin (Bpin = pinacol boronic ester)/arene IMHB can promote remote borylations of N-borylated anilines, 2-amino-N-alkylpyridine, tetrahydroquinolines, indoles, and 1-borylated naphthalenes. Experimental and computational studies support molecular geometries with the Bpin orientation controlled by a C-H⋯O IMHB. IMHB-directed remote CHB appeared operative in the C6 borylation of 3-aminoindazole (seven-membered IMHB) and C6 borylation of an osimertinib analogue where a pyrimidine IMHB creates the steric shield. This study informs researchers to evaluate not only inter- but also intramolecular noncovalent interactions as potential drivers of remote CHB regioselectivity.

Effect of Ligand Structure on the Electron Density and Activity of Iridium Catalysts for the Borylation of Alkanes.

An in-depth study of iridium catalysts for the borylation of alkyl C-H bonds is reported. Although the borylation of aryl C-H bonds can be catalyzed by iridium complexes containing phen or bpy ligands at mild temperatures and with limiting arene, the borylation of alkyl C-H bonds remains underdeveloped. We prepared a library of phenanthrolines that contain varying substitution patterns. The corresponding phen-Ir trisboryl carbon monoxide complexes were synthesized to determine the electron-donating ability of these ligands, and the initial rates for the borylation of the C-H bonds in THF and diethoxyethane ß to oxygen catalyzed by Ir complexes containing these ligands were measured. For some subsets of these ligands, the donor ability correlated positively with the rate of C-H borylation catalyzed by the complexes containing ligands within a given subset. However, across subsets, ligands possessing similar donor properties to one another form catalysts for the borylation of alkyl C-H bonds with widely varying activity. This phenomenon was investigated computationally, and it was discovered that the stabilizing interactions between the phenanthroline ligand and the boryl ligands attached to Ir in the transition state for C-H oxidative addition could account for the differences in the activity of the catalysts that possess similar electron densities at Ir. The effect of these interactions on the borylation of secondary alkyl C-H bonds is larger than it is on the borylation of primary alkyl C-H bonds.

One-Pot Iridium Catalyzed C-H Borylation/Sonogashira Cross-Coupling: Access to Borylated Aryl Alkynes.

Borylated aryl alkynes have been synthesized via one-pot iridium catalyzed C-H borylation (CHB)/Sonogashira cross-coupling of aryl bromides. Direct borylation of aryl alkynes encountered problems related to the reactivity of the alkyne under CHB conditions. However, tolerance of aryl bromides to CHB made possible a subsequent Sonogashira cross-coupling to access the desired borylated aryl alkynes.

Six-fold C-H borylation of hexa-peri-hexabenzocoronene.

Hexa-peri-hexabenzocoronene (HBC) is known to be a poorly soluble polycyclic aromatic hydrocarbon for which direct functionalization methods have been very limited. Herein, the synthesis of hexaborylated HBC from unsubstituted HBC is described. Iridium-catalyzed six-fold C-H borylation of HBC was successfully achieved by screening solvents. The crystal structure of hexaborylated HBC was confirmed via X-ray crystallography. Optoelectronic properties of the thus-obtained hexaborylated HBC were analyzed with the support of density functional theory calculations. The spectra revealed a bathochromic shift of absorption bands compared with unsubstituted HBC under the effect of the σ-donation of boryl groups.

Synthesis of 2-D-L-Tryptophan by Sequential Ir-Catalyzed Reactions.

Herein, we report a practical synthesis of 2-D-L-tryptophan via sequential Ir-catalyzed C-H borylation, and Ir-catalyzed C-2-deborylative deuteration steps. In this synthetic sequence, deprotection of the Boc and methyl ester groups proved challenging, due to replacement of deuterium with hydrogen. However, mild deprotection conditions were developed to avoid this D/H scrambling. Further, 2-D-L-Tryptophan is stable in many buffers used for biological studies.

NNB-Type Tridentate Boryl Ligands Enabling a Highly Active Iridium Catalyst for C⁻H Borylation.

Boryl ligands play a very important role in catalysis because of their very high electron-donating property. In this paper, NNB-type boryl anions were designed as tridentate ligands to promote aryl C-H borylation. In combination with [IrCl(COD)]2, they generate a highly active catalyst for a broad range of (hetero)arene substrates, including highly electron-rich and/or sterically hindered ones. This work provides a new NNB-type tridentate boryl ligand to support homogeneous organometallic catalysis.

Cobalt Pincer Complexes in Catalytic C-H Borylation: The Pincer Ligand Flips Rather Than Dearomatizes.

The mechanism for the borylation of an aromatic substrate by a cobalt pincer complex was investigated by density functional theory calculations. Experimental observations identified trans-(iPrPNP)CoH2(BPin) as the resting state in the borylation of five-membered heteroarenes, and 4-BPin-(iPrPNP)Co(N2)BPin as the resting state in the catalytic borylation of arene substrates. The active species, 4-R-(iPrPNP)CoBPin (R=H, BPin), were generated by reductive elimination of H2 in the former, through Berry pseudorotation to the cis isomer, and N2 loss in the latter. The catalytic mechanism of the resulting Co(I) complex was computed to involve three main steps: C-H oxidative addition of the aromatic substrate (C6H6), reductive elimination of PhBPin, and regeneration of the active complex. The oxidative addition product formed through the most favorable pathway, where the breaking C-H bond of C6H6 is parallel to a line between the two phosphine atoms, leaves the complex with a distorted PNP ligand, which rearranges to a more stable complex via dissociation and re-association of HBPin. Alternative pathways, σ-bond metathesis and the oxidative addition in which the breaking C-H bond is parallel to the Co-B bond, are predicted to be unlikely for this Co(I) complex. The thermodynamically favorable formation of the product PhBPin via reductive elimination drives the reaction forward. The active species regenerates through the oxidative addition of B2Pin2 and reductive elimination of HBPin. In the overall reaction, the flipping (refolding) of the five-membered phosphine rings, which connects the species with two phosphine rings folded in the same direction and that with them folded in different directions, is found to play an important role in the catalytic process, as it relieves steric crowding within the PNP ligand and opens Co coordination space. Metal-ligand cooperation based on the ligand's aromatization/dearomatization, a common mechanism for heavy-metal pincer complexes, and the dissociation of one phosphine ligand, do not apply in this system. This study provides guidance for understanding important features of pincer ligands with first-transition-row metals that differ from those in heavier metal complexes.

Iridium/N-heterocyclic carbene-catalyzed C-H borylation of arenes by diisopropylaminoborane.

Catalytic C-H borylation of arenes has been widely used in organic synthesis because it allows the introduction of a versatile boron functionality directly onto simple, unfunctionalized arenes. We report herein the use of diisopropylaminoborane as a boron source in C-H borylation of arenes. An iridium(I) complex with 1,3-dicyclohexylimidazol-2-ylidene is found to efficiently catalyze the borylation of arenes and heteroarenes. The resulting aminoborylated products can be converted to the corresponding boronic acid derivatives simply by treatment with suitable diols or diamines.