Insights on Microplastic Contamination from Municipal and Textile Industry Effluents and Their Removal Using a Cellulose-Based Approach.

The rampant use of plastics, with the potential to degrade into insidious microplastics (MPs), poses a significant threat by contaminating aquatic environments. In the present study, we delved into the analysis of effluents from textile industries, a recognized major source of MPs contamination. Data were further discussed and compared with a municipal wastewater treatment plant (WWTP) effluent. All effluent samples were collected at the final stage of treatment in their respective WWTP. Laser diffraction spectroscopy was used to evaluate MP dimensions, while optical and fluorescence microscopies were used for morphology analysis and the identification of predominant plastic types, respectively. Electrophoresis was employed to unravel the prevalence of negative surface charge on these plastic microparticles. The analysis revealed that polyethylene terephthalate (PET) and polyamide were the dominant compounds in textile effluents, with PET being predominant in municipal WWTP effluents. Surprisingly, despite the municipal WWTP exhibiting higher efficiency in MP removal (ca. 71% compared to ca. 55% in textile industries), it contributed more to overall pollution. A novel bio-based flocculant, a cationic cellulose derivative derived from wood wastes, was developed as a proof-of-concept for MP flocculation. The novel derivatives were found to efficiently flocculate PET MPs, thus allowing their facile removal from aqueous media, and reducing the threat of MP contamination from effluents discharged from WWTPs.

Determination of an Anti-Parasitic Active Pharmaceutical Ingredient in Wastewater Effluents Using Capillary Zone Electrophoresis.

Ireland has a successful pharmaceutical industry with over 100 pharmaceutical manufacturing sites across the island. Although this success has many benefits, the irreversible effects emissions from pharmaceutical manufacturing can have on the environment are a major drawback. Although known pollutants are regularly monitored with limits set out by the Environmental Protection Agency, one significant pollutant has been overlooked: pharmaceutical pollution. Detecting these pollutants and ensuring they are at a safe concentration for the environment is of utmost importance. In recent years, capillary electrophoresis is being recognised as a suitable alternative to high-performance liquid chromatography due to its many benefits such as faster analysis, water-based buffers and smaller sample volumes. In this paper, a capillary zone electrophoresis (CZE) method with a preconcentration step of solid-phase extraction was developed for an anti-parasitic active pharmaceutical ingredient (API) called ZB23. The API was successfully detected in a wastewater sample in less than 10 min using the CZE parameters of 25 mM borate buffer with a pH of 10.5, 15% MeOH, 10 kV voltage, 25 mbar for 5 s injection size, an Lt of 40 cm, an Ld of 31.5 cm and a detection wavelength of 214 nm.

Refining habitat selection for sulfate-reducing bacteria: Evaluating suitability and adaptability for sulfate-metal wastewater treatment during anaerobic-to-aerobic transitions.

Inoculating sulfate-reducing bacteria (SRB) habitats offers an eco-friendly method for treating sulfate-metal laden wastewater, characterized by high sulfate levels, low pH, and elevated heavy metals. This study optimizes source habitat selection of SRB by evaluating groundwater, sewage sludge, and lake sediment, focusing on their suitability and adaptability to aerobic-anaerobic transitions in industrial settings. Sewage sludge, with its slightly acidic pH, reducing environment, and high nutrient levels (Total organic carbon: 207.53 g kg-1, Total nitrogen: 47.12 g kg-1), provides robust SRB potential, as supported by its highest diversity index. However, heavy metals and polycyclic aromatic hydrocarbons pose application challenges. All habitats effectively reduced metal concentrations anaerobically, with Cu removal reaching 95%-99%, and groundwater achieved the highest chemical oxygen demand reduction (63.6%) aerobically. Sludge and sediment showed high biomass and extracellular polymeric substances (EPS) accumulation, while groundwater's nucleic acid-rich EPS enhanced metal immobilization, resulting in stable residual metal forms but with potential remobilization under oxidative conditions. Microbial analysis revealed that Proteobacteria and Firmicutes were key players during transitions, with the highest SRB abundance in groundwater. SRB composition varied across habitats, with Sedimentibacter (13.04%), Desulfovibrio (6.33%), and Desulfomonile (8.1%) dominating in groundwater, sludge, and sediment, respectively, during the anaerobic stage. Functional analysis highlighted sludge's persistence in sulfate reduction under aerobic conditions, while groundwater's limited nitrogen cycle involvement indicated broader biogeochemical limitations. Collectively, these findings highlight strengths and limitations of each habitat as SRB inoculum source, emphasizing the importance of tailored anaerobic-to-aerobic strategies for effective wastewater management.

Cutting-Edge Applications of Cellulose-Based Membranes in Drug and Organic Contaminant Removal: Recent Advances and Innovations.

The increasing environmental challenges caused by pharmaceutical waste, especially antibiotics and contaminants, necessitate sustainable solutions. Cellulose-based membranes are considered advanced tools and show great potential as effective materials for the removal of drugs and organic contaminants. This review introduces an environmentally friendly composite membrane for the elimination of antibiotics and dye contaminants from water and food, without the use of toxic additives. The potential of cellulose-based membranes in reducing the impact on water quality and promoting environmental sustainability is emphasized. Additionally, the benefits of using biobased cellulose membranes in membrane biological reactors for the removal of antibiotics from pharmaceutical waste and milk are explored, presenting an innovative approach to achieving a circular economy. This review provides recent and comprehensive insights into membrane bioreactor technology, making it a valuable resource for researchers seeking efficient methods to break down antibiotics in industrial wastewater, particularly in the pharmaceutical and dairy industries.

Pharmaceutical effluent degradation using hydrogen peroxide-supported zerovalent iron nanoparticles catalyst.

Pharmaceutical effluents generated during drugs production and application are often times released into the water systems with little or no treatment, which could pose potential danger to the ecosystem. Advanced oxidation processes for organic pollutants treatment have gained wide consideration due to their effectiveness. In this work, hydrogen peroxide (H2O2) and hydrogen peroxide-supported nano zerovalent iron (H2O2@nZVIs) were deployed to study pharmaceutical effluents (PE) degradation via batch experiments, under various reaction time, (H2O2) and (H2O2@nZVIs) concentrations, pH, PE concentration, and temperature. The nZVIs was prepared from the green synthesis of Vernonia amygdalina leaf extract and characterized using different analytical tools such as Fourier Transform-Infrared Spectroscopy (FT-IR), Gas Chromatography Mass Spectroscopy (GC-MS), Scanning Electron Microscopy (SEM), and X-Ray Diffraction Spectroscopy (XRD). The FT-IR results showed the presence of -C = O, -NH, -OH, -C = C and, -C-O functional groups, SEM report showed that the morphology of the nZVIs is round in shape, while GC-MS revealed the presence of several phytochemicals. When the concentration of the effluent was increased from 10 to 30 ml, the percentage decolourization decreased from 74.74 to 51.96% and from 80.36 to 54.38% for H2O2 and H2O2@nZVI respectively, whereas when the contact time was increased from 10 to 60 min, the percentage decolourization rose from 70.39 to 83.49% for H2O2 and from 85.19 to 89.73% when H2O2@nZVI was used. When the effect of pH was assessed, it was observed that on increasing the pH from 2 to 10, the percentage decolourization rose from 74.5 to 80.25% for H2O2, however, with H2O2@nZVI, the percentage decolourization decreased from 81.50 to 68%. Maximum percentage decolourization of 57.10% and 94.56% for H2O2 and H2O2@nZVI was achieved at catalyst volume of 25 ml. For all the parameters tested, the H2O2@nZVIs performed much better indicating that the nZVIs enhanced the decolourization ability of the H2O2. The kinetic results showed that the decolorization of pharmaceutical effluent by both catalysts fitted very well with the second-order model, while thermodynamic properties of enthalpy change were found to be 10.025 and 27.005 kJ/mol/K for H2O2 and H2O2@nZVIs respectively suggesting that the oxidation process is endothermic in nature. This technique employed in using hydrogen peroxide-supported zero valent iron, proved to be highly efficient not only for pharmaceutical effluent degradation but also in the elimination of lead from the effluent.

Chemical functionalization of Chitosan biopolymer with diacetyl monoxime for enhanced Cr(VI) removal from aqueous media.

Hexavalent chromium is known for high toxicity as well as carcinogenicity and leads to contamination of water bodies through various anthropogenic activities. Chitosan biopolymer has limited adsorption capacity towards this toxicant. In order to boost hexavalent chromium adsorption, diacetylmonoxime was used to modify thiolated chitosan. The resulting material was extensively characterized using Fourier Transform Infrared, Energy Dispersive X-ray, Scanning Electron Microscopic and X-ray Diffraction investigations. To comprehend the adsorption mechanism in better way, various adsorption isotherms like Langmuir and Freundlich were investigated. In order to maximize the efficiency of adsorbent, response surface approach was used to optimize the several adsorption parameters, such as pH, adsorbent dose, adsorbate concentration, duration, and temperature. The results indicated that, 98 ± 0.5 % adsorption takes place at pH 5.0 with an adsorbent dosage of 20 mg and an adsorbate concentration of 20 mg L-1 at 298 K temperature within a short period of 60 min. According to the Langmuir monolayer isotherm, the material was observed to have Cr(VI) adsorption capacity of 430.73 mg g-1 under optimized operational conditions. Adsorption of Cr(VI) proceeds with pseudo-second-order kinetics. Because of the increasing unpredictability at interaction sites, it was discovered that adsorption efficiency decreased with rising temperature. Negative values of Gibbs free energy and enthalpy pointed towards the spontaneous and exothermic behaviour of the adsorption process. To find out if the material was suitable for greater sample volumes, column tests were conducted that showed excellent results for continuous column adsorption experiments.

Predicting metabolic pathways and microbial interactions in dark fermentation systems treating real cheese whey effluents.

Dark fermentation of agro-industrial effluents is a promising way for waste valorization. However, understanding the complex microbial dynamics and metabolic interactions within the microbial communities remains challenging. This study investigates the microbial communities involved in continuous hydrogen production from cheese whey and fermented cheese whey using functional profiling with PICRUSt2. The analysis reveals the primary roles of key microbial genera. Lactobacillus dominates carbohydrate consumption and lactate production, while Clostridium sensu stricto 12 and Caproiciproducens are engaged in a competitive dynamic for lactate utilization. Clostridium sensu stricto 12 drives hydrogen production via electron bifurcation reactions, whereas Caproiciproducens may utilize alternative energy conservation mechanisms. The interaction between these genera is influenced by substrate availability and process conditions. This study highlights the utility of functional profiling in elucidating microbial interactions and metabolic pathways in dark fermentation. The findings emphasize the importance of understanding microbial interactions to optimize biohydrogen production processes.

Wastewater treatment plant effluents increase the global warming potential in a subtropical urbanized river.

Rivers play a pivotal role in global carbon (C) and nitrogen (N) biogeochemical cycles. Urbanized rivers are significant hotspots of greenhouse gases (GHGs, N2O, CO2 and CH4) emissions. This study examined the GHGs distributions in the Guanxun River, an effluents-receiving subtropical urbanized river, as well as the key environmental factors and processes affecting the pattern and emission characteristics of GHGs. Dissolved N2O, CO2, and CH4 concentrations reached 228.0 nmol L-1, 0.44 mmol L-1, and 5.2 µmol L-1 during the wet period, and 929.8 nmol L-1, 0.7 mmol L-1, and 4.6 µmol L-1 during the dry period, respectively. Effluents inputs increased C and N loadings, reduced C/N ratios, and promoted further methanogenesis and N2O production dominated by incomplete denitrification after the outfall. Increased urbanization in the far downstream, high hydraulic residence time, low DO and high organic C environment promoted methanogenesis. The strong CH4 oxidation and methanogenic reactions inhibited by the effluents combined to suppress CH4 emissions in downstream near the outfall, and the process also contributed to CO2 production. The carbon fixation downstream from the outfall were inhibited by effluents. Ultimately, it promoted CO2 emissions downstream from the outfall. The continuous C, N, and chlorine inputs maintained the high saturation and production potential of GHGs, and altered microbial community structure and functional genes abundance. Ultimately, the global warming potential downstream increased by 186 % and 84 % during wet and dry periods on the 20-year scale, and increased by 91 % and 49 % during wet and dry periods on the 100-year scale, respectively, compared with upstream from the outfall. In urbanized rivers with sufficient C and N source supply from WWTP effluents, the large effluent equivalently transformed the natural water within the channel into a subsequent "reactor". Furthermore, the IPCC recommended EF5r values appear to underestimate the N2O emission potential of urbanized rivers with high pollution loading that receiving WWTP effluents. The findings of this study might aid the development of effective strategies for mitigating global climate change.

Phyto-treatment of tannery industry effluents under combined application of citric acid and chromium-reducing bacterial strain through Lemna minor L.: A lab scale study.

Contamination of agricultural soils with heavy metals (HMs) poses a significant environmental threat, especially because industrial discharges often irrigate agricultural lands. A prominent source of HM(s) pollution occurs from tannery effluents containing high concentrations of chromium (Cr) in both Cr3+ and Cr6+ forms along with other toxic materials. Cr is known for its carcinogenic and mutagenic properties in biological systems. Microbe-assisted phytoremediation has emerged as a promising and environmentally friendly approach for detoxifying Cr-contaminated environments. This study aimed to evaluate the performance of citric acid (CA) and a Cr-reducing bacterial strain (Staphylococcus aureus) on the phytoextraction potential of Lemna minor within a Constructed Wetland System treated with tannery wastewater. Various combinations of tannery wastewater (0, 50, and 100 %), CA (0, 5 and 10 mM), and microbial inoculants were applied to the test plants. The mitigative effects of Staphylococcus aureus strain K1 were examined in combination with different concentrations of CA (0, 5, 10 mM). Data on growth and yield attributes highlighted the beneficial effects of bacterial inoculation and CA in ameliorating Cr toxicity in L. minor, as evidenced by increased foliar chlorophyll and carotenoid contents, enhanced antioxidant enzyme activities (SOD, POD, APX, CAT), and improved nutrient uptake. Specifically, CA application resulted in an enhancement of Cr ranging from 12% to 15% and 23%-31% in concentration, and 134%-141% and 322%-337% in Cr accumulation, respectively. When combined with the S. aureus inoculation treatment, CA application (5 and 10 mM) further increased the concentration and accumulation of Cr in L. minor. The enhancement in Cr ranged from 12% to 23% and 27%-41% in concentration, 68%-75%, and 179%-185% in accumulation, respectively. These results demonstrated that L. minor is an effective choice for environmentally friendly Cr remediation due to its continued ability to grow in polluted wastewater. This study suggested that microbial-assisted phytoextraction combined with chelating agents such as CA could be a practical and effective approach for remediating tannery effluents.

International Workers' Day: Consumption Patterns of Morphine, Codeine, and Methamphetamine in Urban and Rural Areas Based on Wastewater-Based Epidemiology.

Wastewater-based epidemiology (WBE) is a reliable means to estimate drug consumption in a specific population. By measuring the concentration of drug residues or metabolites in wastewater, the consumption behavior pattern of a specific population can be deduced. Using the WBE method, the present study, for the first time, continuously monitored the differences in the consumption of morphine (MOR), codeine (CODE), and methamphetamine (METH) in three wastewater-treatment plants in a city and two surrounding villages in Xinjiang, China during International Workers' Day and the following week. The wastewater samples were pretreated by solid-phase extraction and then analyzed by high-performance liquid chromatography-tandem mass spectrometry. Methamphetamine was not detected in rural areas and was detected only on International Workers' Day in urban areas. According to the estimation of per capita consumption, the per capita consumption of MOR, CODE, and METH in urban inhabitants was 12.04 to 23.39, 10.44 to 16.39, and 1.31 mg/day/1000 inhabitants. The per capita consumption of MOR and CODE in rural areas was 5.19 to 8.35 and 2.56 to 3.52 mg/day/1000 inhabitants. The consumption of MOR in urban and rural areas was significantly higher than that of CODE and METH. During International Workers' Day, workdays, and weekends, the consumption of MOR and CODE in urban areas is significantly higher than that in rural areas. Compared with those on weekends, the consumption of urban MOR and CODE increased more during International Workers' Day. The consumption of MOR in urban areas showed a weekend effect. The present study can provide information for subsequent research and government departments. Environ Toxicol Chem 2024;00:1-9. © 2024 SETAC.

Profile and antimicrobial susceptibility patterns of bacteria isolated from effluents of Kolladiba and Debark hospitals.

This study aimed to investigate the presence of antibiotic susceptibility patterns and bacterial profiles of some multi-drug-resistant bacteria isolated from the effluents of Kolladiba and Debark Hospitals. Sixteen samples were collected from Kolladiba and Debark Hospitals in North Gondar, Ethiopia, to investigate the presence of multi-drug-resistant bacteria. To assess susceptibility patterns, well-isolated bacterial colonies were subjected to seven antibiotics. The selected resistant isolates were characterized using morphological and biochemical tests. Plasmid DNA analysis of the isolates was also performed. Out of a total of 28 bacterial isolates, 12 were found to be multi-drug resistant. Among the tested antibiotics, erythromycin was the most resistant antibiotic, while novobiocin was the most effective antibiotic. A plasmid profile study of the isolates revealed both the presence and absence of plasmids. The number of plasmids ranged from zero to four, with plasmid sizes of 100, 900, 1,000, 1,400, 1,500, and 1,800 base pairs. This study concluded that effluents from both hospitals have high number of multi-drug-resistant isolates. The genes responsible for multi-drug resistance in bacterial isolates under this study could be either plasmid-mediated or chromosomal DNA-mediated. The presence of multi-drug-resistant bacteria in these effluents should not be overlooked.

Antimicrobial resistance profiling of bacteria isolated from wastewater and samples of pharmaceutical industries in South India.

The study was aimed to determine the phenotypic and genotypic antimicrobial resistance in the isolated bacteria from the influent (25), effluent (15), surface and ground water samples (15) surrounding the pharmaceutical industries located in south India. From 55 samples, 48 isolates of 10 different bacteria were obtained. The identified bacterial isolates were viz. Klebsiella pneumoniae, Pseudomonas aeruginosa, Enterobacter aerogenes, Corynebacterium sp., Acinetobacter sp., Aeromonas punctata, Ralstonia picketti, Staphylococcus aureus, Stenotrophomonas maltophillia, and Citrobacter freundii. The phenotypic profile of resistance through antibiotic susceptibility test was carried out against sixteen different antibiotics. Standard PCR technique was used for the detection of 12 resistance genes encoding carbapenems, quinoline, aminoglycoside, ß-lactam belonging blaOXA-58,blaOXA-22,qnrA, qnrB, aac(6)-Ib-cr, aac (3)-XI, mec A, qepA, aadB, blaVIM, blaOXA-48 and blaNDM. Pseudomonas aeruginosa (1: TN/I/2020) showed presence of 3 resistance genes. qnrB (489 bp) gene was present in maximum of 7 isolates while blaVIM (196 bp) gene was present in 6 isolates. The resistance genes blaNDM (621 bp) was present in three different isolates; aac (X):6)-lb-cr (482 bp), qepA (495 bp), aadB (500 bp), blaOXA-58 (843 bp) resistant genes were present in two different isolates each among the bacterial isolates obtained in this study. In phenotypic resistance profiling by AST method, out of 16 antibiotics tested, 14 showed resistance. Similarly, in genotypic resistance profiling, among 12 resistance genes tested, a maximum of three resistance genes were noticed in Pseudomonas aeruginosa. There were positive and negative correlations observed between phenotypic and genotypic resistance among different antibiotics and their resistance genes indicating the variations in the resistance gene expression.

Enhancement of effluent degradation by zinc oxide, carbon nitride, and carbon xerogel trifecta on brass monoliths.

In recent years, heterogeneous photocatalysis has emerged as a promising alternative for the treatment of organic pollutants. This technique offers several advantages, such as low cost and ease of operation. However, finding a semiconductor material that is both operationally viable and highly active under solar irradiation remains a challenge, often requiring materials of nanometric size. Furthermore, in many processes, photocatalysts are suspended in the solution, requiring additional steps to remove them. This can render the technique economically unviable, especially for nanosized catalysts. This work demonstrated the feasibility of using a structured photocatalyst (ZnO, g-C3N4, and carbon xerogel) optimized for this photodegradation process. The synthesized materials were characterized by nitrogen adsorption and desorption, X-ray diffraction (XRD), and diffuse reflectance spectroscopy (DRS). Adhesion testing demonstrated the efficiency of the deposition technique, with film adhesion exceeding 90%. The photocatalytic evaluation was performed using a mixture of three textile dyes in a recycle photoreactor, varying pH (4.7 and 10), recycle flow rate (2, 4, and 6 L h-1), immobilized mass (1, 2, and 3 mg cm-2), monolith height (1.5, 3.0, and 4.5 cm), and type of radiation (solar and visible artificials; and natural solar). The structured photocatalyst degraded over 99% of the dye mixture under artificial radiation. The solar energy results are highly promising, achieving a degradation efficiency of approximately 74%. Furthermore, it was possible to regenerate the structured photocatalyst up to seven consecutive times using exclusively natural solar light and maintain a degradation rate of around 70%. These results reinforce the feasibility and potential application of this system in photocatalytic reactions, highlighting its effectiveness and sustainability.

Seasonal variation and human health risk assessment of potentially toxic elements in pharmaceutical effluents around Ilorin metropolis, Nigeria.

Potentially toxic elements (PTEs) are widely released into the environment as a result of increased urban and industrial development in recent years. The bulk of PTEs are cancer-causing and harm human health by producing free radicals. As a result, it is crucial to monitor, evaluate, and limit the effects of the elements on human health. In this study, levels of PTEs (As, Cr, Cd, Ni, Co, and Pb) in pharmaceutical effluents discharged along the Asa River around the Ilorin metropolis and their seasonal variations were evaluated. Water samples were collected from eight different locations over a two-season period along the river and analyzed for PTEs using atomic absorption spectrophotometry and an inductively coupled plasma optical emission spectrometer. As, Cd, Pb, Cr, Ni, and Co had mean PTE values in the effluents (both seasons) of 0.0258, 0.0233, 0.00193, 0.0176, and 0.0164 mg/L, respectively, with As and Pb surpassing the WHO standard. Maximum temperature and pH were measured for the physicochemical parameters in the wet season, whereas electrical conductivity and total dissolved solids were seen in the dry season. The average values of the metals in the human risk assessment for carcinogenicity were As > Cd > Pb > Cr > Ni > Co, with As above the recommended threshold in several locations. However, all of the metal hazard indices were < 1, indicating that the waters were suitable for domestic purposes. Nonetheless, the relevant authorities should mandate that pharmaceutical effluents be treated before being released into bodies of water.

Amide groups within polystyrene accelerates tetracycline removal in a continuous advanced microalgal treatment system.

Livestock effluents are challenging to be treated owing that antibiotics and microplastics are untargeted for most biological technologies. As far, microalgal wastewater treatment is recognized as an effective technique for dealing with. In this study, a continuous-flow system was conducted over 45 days to evaluate the effectiveness of Chlamydomonas sp. JSC4 in removing tetracycline (TCH) under the influence of polystyrene (PS). It shows that PS significantly enhanced the dissipation efficiency of TCH from livestock effluents, and 9.83 % TCH removal was increased under 5 mg/L of both TCH and PS exposure. Meanwhile, higher microalgal bioactivity was a significant factor in achieving desirable pollutants removal efficiency, as 87.14 % microalgal biomass was improved owing to reduction of oxidative stress and augmentation of photosynthesis. Importantly, the pivotal active sites, NH2 and CO, were rapidly covered via π-π interactions and hydrogen bonds during adsorption process between TCH and PS, accounting for mitigation of TCH-PS complexes toxicity and improvement of microalgal ribosome metabolism. Additionally, co-exposure to TCH and PS resulted in maximum lipids (0.57 g/L) and energy (20.79 kJ/L) production, further encouraging a fantastic vision for the tertiary process of livestock effluents via advanced microalgal treatment.

Optimizing intermittent micro-aeration as a strategy for enhancing aniline anaerobic biodegradation: kinetic, ecotoxicity, and microbial community dynamics analyses.

Groundwater and soil contamination by aromatic amines (AAs), used in the production of polymers, plastics, and pesticides, often results from improper waste disposal and accidental leaks. These compounds are resistant to anaerobic degradation; however, micro-aeration can enhance this process by promoting microbial interactions. In batch assays, anaerobic degradation of aniline (0.14 mM), a model AA, was tested under three micro-aeration conditions: T30, T15, and T10 (30, 15, and 10 min of micro-aeration every 2 h, respectively). Aniline degradation occurred in all conditions, producing both aerobic (catechol) and anaerobic (benzoic acid) byproducts. The main genera involved in T30 and T15 were Comamonas, Clostridium, Longilinea, Petrimonas, Phenylobacterium, Pseudoxanthomonas, and Thiobacillus. In contrast, in T10 were Pseudomonas, Delftia, Leucobacter, and Thermomonas. While T30 and T15 promoted microbial cooperation for anaerobic degradation and facultative respiration, T10 resulted in a competitive environment due to dominance and oxygen scarcity. Despite aniline degradation in 9.4 h under T10, this condition was toxic to Allium cepa seeds and exhibited cytogenotoxic effects. Therefore, T15 emerged as the optimal condition, effectively promoting anaerobic degradation without accumulating toxic byproducts. Intermittent micro-aeration emerges as a promising strategy for enhancing the anaerobic degradation of AA-contaminated effluents.

Leveraging organic acids in bipolar membrane electrodialysis (BPMED) can enhance ammonia recovery from scrubber effluents.

While air stripping combined with acid scrubbing remains a competitive technology for the removal and recovery of ammonia from wastewater streams, its use of strong acids is concerning. Organic acids offer promising alternatives to strong acids like sulphuric acid, but their application remains limited due to high cost. This study proposes an integration of air stripping and organic acid scrubbing with bipolar membrane electrodialysis (BPMED) to regenerate the organic acids. We compared the energy consumption and current efficiency of BPMED in recovering dissolved ammonia and regenerating sulphuric, citric, and maleic acids from synthetic scrubber effluents. Current efficiency was lower when regenerating sulphuric acid (22 %) compared to citric (47 %) and maleic acid (37 %), attributable to the competitive proton transport over ammonium across the cation exchange membrane. Organic salts functioned as buffers, reducing the concentration of free protons, resulting in higher ammonium removal efficiencies with citrate (75 %) and malate (68 %), compared to sulphate (29 %). Consequently, the energy consumption of the BPMED decreased by 54 % and 35 % while regenerating citric and maleic acids, respectively, compared to sulfuric acid. Membrane characterisation experiments showed that the electrical conductivity ranking, ammonium citrate > ammonium malate > ammonium sulphate, was mirrored by the energy consumption (kWh/kg-N recovered) ranking, ammonium sulphate (15.6) < ammonium malate (10.2) < ammonium citrate (7.2), while the permselectivity ranking, ammonium sulphate > ammonium citrate > ammonium malate, aligned with calculated charge densities. This work demonstrates the potential of combining organic acid scrubbers with BPMED for ammonium recovery from wastewater effluents with minimum chemical input.

Assessment of the Aryl Hydrocarbon Receptor-Mediated Effects of Aromatic Sensitizers in Paper Recycling Effluent Employing Zebrafish Embryos and in Silico Docking.

Aromatic sensitizers and related substances (SRCs), which are crucial in the paper industry for facilitating color-forming and color-developing chemical reactions, inadvertently contaminate effluents during paper recycling. Owing to their structural resemblance to endocrine-disrupting aromatic organic compounds, concerns have arisen about potential adverse effects on aquatic organisms. We focused on SRC effects via the aryl hydrocarbon receptor (AHR), employing molecular docking simulations and zebrafish (Danio rerio) embryo exposure assessments. Molecular docking revealed heightened binding affinities between certain SRCs in the paper recycling effluents and zebrafish Ahr2 and human AHR, which are pivotal components in the SRC toxicity mechanism. Fertilized zebrafish eggs were exposed to SRCs for up to 96 h post fertilization; among these substances, benzyl 2-naphthyl ether (BNE) caused morphological abnormalities, such as pericardial edema and shortened body length, at relatively low concentrations (1 µM) during embryogenesis. Gene expression of cytochrome P450 1A (cyp1a) and ahr2 was also significantly increased by BNE. Co-exposure to the AHR antagonist CH-223191 only partially mitigated BNE's phenotypic effects, despite the effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin being relatively well restored by CH-223191, indicating BNE's AHR-independent toxic mechanisms. Furthermore, some SRCs, including BNE, exhibited in silico binding affinity to the estrogen receptor and upregulation of cyp19a1b gene expression. Therefore, additional insights into the toxicity of SRCs and their mechanisms are essential. The present results provide important information on SRCs and other papermaking chemicals that could help minimize the environmental impact of the paper industry. Environ Toxicol Chem 2024;43:2176-2188. © 2024 SETAC.

Comprehensive review of industrial wastewater treatment techniques.

Water is an indispensable resource for human activity and the environment. Industrial activities generate vast quantities of wastewater that may be heavily polluted or contain toxic contaminants, posing environmental and public health challenges. Different industries generate wastewater with widely varying characteristics, such as the quantity generated, concentration, and pollutant type. It is essential to understand these characteristics to select available treatment techniques for implementation in wastewater treatment facilities to promote sustainable water usage. This review article provides an overview of wastewaters generated by various industries and commonly applied treatment techniques. The characteristics, advantages, and disadvantages of physical, chemical, and biological treatment methods are presented.

Synthesis of Highly Porous Lignin-Sulfonate Sulfur-Doped Carbon for Efficient Adsorption of Sodium Diclofenac and Synthetic Effluents.

Herein, a novel sulfur-doped carbon material has been synthesized via a facile and sustainable single-step pyrolysis method using lignin-sulfonate (LS), a by-product of the sulfite pulping process, as a novel carbon precursor and zinc chloride as a chemical activator. The sulfur doping process had a remarkable impact on the LS-sulfur carbon structure. Moreover, it was found that sulfur doping also had an important impact on sodium diclofenac removal from aqueous solutions due to the introduction of S-functionalities on the carbon material's surface. The doping process effectively increased the carbon specific surface area (SSA), i.e., 1758 m2 g-1 for the sulfur-doped and 753 m2 g-1 for the non-doped carbon. The sulfur-doped carbon exhibited more sulfur states/functionalities than the non-doped, highlighting the successful chemical modification of the material. As a result, the adsorptive performance of the sulfur-doped carbon was remarkably improved. Diclofenac adsorption experiments indicated that the kinetics was better described by the Avrami fractional order model, while the equilibrium studies indicated that the Liu model gave the best fit. The kinetics was much faster for the sulfur-doped carbon, and the maximum adsorption capacity was 301.6 mg g-1 for non-doped and 473.8 mg g-1 for the sulfur-doped carbon. The overall adsorption seems to be a contribution of multiple mechanisms, such as pore filling and electrostatic interaction. When tested to treat lab-made effluents, the samples presented excellent performance.