A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive.

The coupling of high-capacity cathodes and lithium metal anodes promises to be the next generation of high-energy-density batteries. However, the fast-structural degradations of the cathode and anode challenge their practical application. Herein, we synthesize an electrolyte additive, tris(2,2,3,3,3-pentafluoropropyl) borane (TPFPB), for ultra-stable lithium (Li) metal||Ni-rich layered oxide batteries. It can be preferentially adsorbed on the cathode surface to form a stable (B and F)-rich cathode electrolyte interface film, which greatly suppresses the electrolyte-cathode side reactions and improves the stability of the cathode. In addition, the electrophilicity of B atoms in TPFPB enhances the solubility of LiNO3 by 30 times in ester electrolyte to significantly improve the stability of the Li metal anode. Thus, the Li||Ni-rich layered oxide full batteries using TPFPB show high stability and an ultralong cycle life (up to 1500 cycles), which also present excellent performance even under high voltage (4.8 V), high areal mass loading (30 mg cm-2) and wide temperature range (-30∼60°C). The Li||LiNi0.9Co0.05Mn0.05O2 (NCM90) pouch cell using TPFPB with a capacity of 3.1 Ah reaches a high energy density of 420 Wh kg-1 at 0.1 C and presents outstanding cycling performance.

Interfacial modulation of nicotinamide additive enables 9700 h Zn metal batteries.

Aqueous zinc-ion batteries (AZIBs) have recently been paid great attention due to their robust safety features, high theoretical capacity, and eco-friendliness, yet their practical application is hindered by the serious dendrite formation and side reactions of Zn metal anode during cycling. Herein, a low-cost small molecule, nicotinamide (NIC), is proposed as an electrolyte additive to effectively regulate the Zn interface, achieving a highly reversible and stable zinc anode without dendrites. NIC molecules not only modify the Zn2+ solvation structure but also preferentially adsorb on the Zn surface than solvated H2O to protect the Zn anode and provide numerous nucleation sites for Zn2+ to homogenize Zn deposition. Consequently, the addition of 1 wt% NIC enables Zn||Zn symmetric cells an ultra-long lifespan of over 9700 h at 1 mA cm-2, which expands nearly 808 times compared to that without NIC. The advantages of NIC additives are further demonstrated in NaVO||Zn full cells, which exhibit exceptional capacity retention of 90.3 % after 1000 cycles with a high Coulombic efficiency of 99.9 % at 1 A/g, while the cell operates for only 42 cycles without NIC additive. This strategy presents a promising approach to solving the anode problem, fostering advancements in practical AZIBs.

Regulation of Zn2+ Solvation Configuration in Aqueous Batteries via Selenium-Substituted Crown Ether Engineering.

The efficient utilization of the metallic Zn in rechargeable aqueous Zn-ion batteries (RAZBs) struggle to suffer from parasitic Zn dendrite formation, hydrogen evolution reactions as well as severe interfacial degradation at high areal capacity loadings. This study thus proposes to employ the modified crown ether as an aqueous electrolyte additive to regulate the Zn2+ desolvation kinetic and facilitates the horizontally oriented (002) deposition of Zn, extending the lifespan of both the symmetric cell and full cell models. Specifically, zincophilic cyano and hydrophobic selenium atoms are incorporated into the crown ether supramolecule to enhance Zn2+ coordination and desolvation capability. The addition of 4-cyanobenzo-21-crown-7-selenium at a low concentration of 0.5 wt.% effectively mitigates hydrogen evolution and Zn corrosion caused by water, promoting the oriented deposition of Zn2+. The Zn||V2O5 full cell prototype, assembled with the areal capacity loadings of 2 mAh cm-2 and N/P ratio of 2.95, exhibits negligible capacity fading at 2.0A g-1 for 300 cycles, highlighting the commercial feasibility of supramolecular macrocycles additive for practical RAZBs applications.

Rational intramolecular and interface design of cellulosic paper electrode via PEDOT with AQS as dopant and electrolyte additives.

Cellulose fibers(CFs)-based electrode materials are of considerable interest for future wearable electronic devices due to excellent flexibility and strength, and hydrophilicity. The effective introduction of electrode materials into CFs is essential for flexible supercapaciotors(SCs). A tunable electrochemical performance of conductive polymers for poly(3,4-ethylenedioxythiophene)(PEDOT) has been aroused great interests. Herein, we design its electrochemical process via sodium anthraquinone-2-sulfonate(AQS) as dopant and electrolyte additive to construct active electrode interior and interface. As a result, the PEDOT@CFs electrode exhibits great increase of doping level from 0.16 to 0.29, conductivity from 353.46 to 626.15 S m-1, and specific capacitance from 140.22 to 1211.57 F g-1 at a current density of 0.2 A g-1. Furthermore, the PEDOT:AQS@CFs electrode possess excellent cyclic stability (96.01 %) after 1000 cycles. The work reveals the mechanism of AQS as dopant and electrolyte additive, and provides a new perspective for application of PEDOT in energy storage field.

CF3-Substituted Ethylene Carbonates for High-Voltage/High-Energy Rechargeable Lithium Metal-LiNi0.8Co0.1Mn0.1O2 Batteries.

The development of advanced liquid electrolytes for high-voltage/high-energy rechargeable Li metal batteries is an important strategy to attain an effective protective surface film on both the Li metal anode and the high-voltage composite cathode. Herein, we report a study of two CF3-substituted ethylene carbonates as components of the electrolyte solutions for Li metal|NCM811 cells. We evaluated trifluoromethyl ethylene carbonate (CF3-EC) and trans-ditrifluoromethylethylene carbonate Di-(CF3)-EC as cosolvents and additives to the electrolyte solutions. Using CF3-substituted ethylene carbonates as additives to a fluoroethylene carbonate (FEC)-based electrolyte solution enables improved capacity retention of high-power Li metal|NCM811 cells. The composition of the products from the transformations of CF3-EC and Di-(CF3)-EC in Li|NCM811 cells was studied by FTIR, XPS, and 19F NMR spectroscopy. We concluded that fluorinated Li alkyl carbonates are the main reaction products formed from these cyclic carbonates during the cycling of Li|NCM 811 cells, and fragmentation of the ring with the formation of CO2, CO, or olefins is not characteristic of CF3-substituted ethylene carbonates. The NCM 811 cathodes and Li metal anodes were characterized by X-ray diffraction, SEM, XPS, and FTIR spectroscopy. The role of CF3-substituted ethylene carbonate additives in stabilizing high energy density secondary batteries based on Li metal anodes was discussed. A bright horizon for developing sustainable rechargeable batteries with the highest possible energy density is demonstrated.

Trace Small Molecular/Nano-Colloidal Multiscale Electrolyte Additives Enable Ultra-Long Lifespan of Zinc Metal Anodes.

Electrolyte additives are efficient to improve the performance of aqueous zinc-ion batteries (AZIBs), yet the current electrolyte additives are limited to fully water-soluble additives (FWAs) and water-insoluble additives (WIAs). Herein, trace slightly water-soluble additives (SWAs) of zinc acetylacetonate (ZAA) were introduced to aqueous ZnSO4 electrolytes. The SWA system of ZAA is composed of a FWA part and a WIA part in a dynamic manner of dissolution equilibrium. The FWA part exists as soluble small molecules, which efficiently regulate Zn2+ ion solvation structure, while the WIA part exists as insoluble nano-colloids, which in-situ form a thick and robust solid electrolyte interface film on zinc metal anodes (ZMAs). Such small molecular/nano-colloidal multiscale electrolyte additives of ZAA are capable to not only improve ionic conductivity and transference number but also inhibit corrosion, hydrogen evolution, and Zn dendrite on ZMAs. The SWA-based Zn∥Zn half battery delivers a superb cumulative plating capacity of 15 Ah cm-2 under 1 mAh cm-2 and 20 mA cm-2, and the SWA-based NH4V4O10∥Zn pouch cell obtains a capacity retention of 67.8% within 4000 cycles under 4 A g-1. The study provides innovative insights for rational design of electrolyte additives, which may pave the way for the practicality of AZIBs.

Improving the Oxygen Evolution Reaction Kinetics in Zn-Air Battery by Iodide Oxidation Reaction.

Zinc-air batteries (ZABs) have garnered considerable attention as a highly promising contender in the field of energy storage and conversion. Nevertheless, their performance is considerably impeded by the proliferation of dendrites on the Zinc anode and the slow kinetics of the redox reaction on the air cathode. Herein, taking Ag30%@LaCoO3 (Ag30%@LCO) heterojunction catalyst as the cathode, it is demonstrated that adding KI additives to the alkaline electrolyte can not only enhance the oxygen electrocatalytic reaction but also inhibit the formation of zinc anode dendrites, thereby achieving a comprehensive improvement in the performance of ZABs. Under the action of the KI additive, the optimized Ag30%@LCO catalyst shows a decreased overpotential from 460 to 220 mV at j = 10 mA cm-2, while the assembled ZAB shows reduced charging potential (1.8 V), and long cycle stability (180 h). Furthermore, the morphology characterization results indicate a reduction in dendrites on the Zn anode. Both experimental and calculated results indicate that the presence of I- as a reaction modifier alters the trajectory of the conventional oxygen evolution reaction, resulting in a more thermodynamically favorable pathway. The introduction of KI additives as electrolytes provides a straightforward approach to developing comprehensively improved ZABs.

Oriented Metal Stripping for Highly Reversible Zinc Anode.

Aqueous zinc metal batteries are a viable candidate for next-generation energy storage systems, but suffer from poor cycling efficiency of the Zn anode. Emerging approaches aim to regulate zinc plating behavior to suppress uncontrolled dendrites, while the stripping process is seldom considered. Herein, an oriented metal stripping strategy is demonstrated to stabilize the Zn anode by removing high-index facets for exposing the (002) plane through the addition of anionic additive sodium citrate (SC). Consequently, high-index facets that coordinate strongly with SC are preferentially stripped out due to a reduced stripping barrier, rendering stable (002) facet preponderant in epitaxial plating. After repeat stripping/plating, the ultra-high proportion of 93% for (002) and large-size grains of ≈100 µm (six times larger than before) can be obtained. Zn anode shows continuous 25 000 cycles with low overpotential at 100 mA cm-2 in symmetric cells and more than 70 h of stable operation even at an ultra-high depth of discharge of 92.3%. Moreover, an extremely long lifespan of 12 000 cycles at 10 A g-1 with a high capacity retention of 89% is achieved by the assembled Zn//I2 battery. This work provides a distinctive approach to improving the stripping process to design highly efficient zinc anodes for promising aqueous zinc metal batteries.

Easy-to-Lay Poly-N Heterocyclic Additives Enable Long-Term Stabilization of Zinc-Ion Capacitor Anodes under Deep Plating/Stripping.

Addition of organic compounds containing O/N heteroatoms to aqueous electrolytes such as ZnSO4 (ZS) solutions is one of the effective strategies to inhibit Zn anode dendrites and side reactions. However, addressing the stability of Zn plating/stripping at high current densities and areal capacities by this method is still a challenge, especially in capacitors known for high power and long life. Herein, an organic heterocyclic compound of 1, 4, 7, 10-tetraazacyclododecane (TC) containing four symmetrically distributed N atoms is employed as ZS additive, expanding the life of Zn anodes from ≈ 30 h to 1000 and 240 h at deep plating/stripping conditions of 10 and 20 mA cm-2/mAh cm-2, respectively; the cumulative capacity is as high as 5.0 Ah cm-2 with 99% Coulombic efficiency, far exceeding reported additives. TC with higher binding energies than H2O for Zn species tends to adsorb to Zn (002) in a lying manner and participate in the solvation shell of Zn2+, thus avoiding Zn dendrites and side-reaction damage, especially at high current densities. The TC-endowed Zn anode's stability under such extreme conditions is verified in Zn-ion capacitors (i.e., > 94.6% capacity retention after 28 000 cycles), providing new insights into the development of high-power Zn-based energy storage devices.

Low-Cost Aqueous Electrolyte with MBA Additives for Uniform and Stable Zinc Deposition.

Aqueous zinc ion batteries (AZIBs) are attracting increasing research interest due to their intrinsic safety, low cost, and scalability. However, the issues including hydrogen evolution, interface corrosion, and zinc dendrites at anodes have seriously limited the development of aqueous zinc ion batteries. Here, N,N-methylenebis(acrylamide) (MBA) additives with -CONH- groups are introduced to form hydrogen bonds with water and suppress H2O activity, inhibiting the occurrence of hydrogen evolution and corrosion reactions at the interface. In situ optical microscopy demonstrates that the MBA additive promotes the uniform deposition of Zn2+ and then suppresses the dendrite growth on the zinc anode. Therefore, Zn//Ti asymmetric batteries demonstrate a high plating/stripping efficiency of 99.5%, while Zn//Zn symmetric batteries display an excellent cycle stability for more than 1000 h. The Zn//MnO2 full cells exhibit remarkable cycling stability for 700 cycles in aqueous electrolytes with MBA additives. The additive engineering via MBA achieved the dendrite-free Zn anodes and stable full batteries, which is favorable for advanced AZIBs in practical applications.

Unlocking High Capacity and Reversible Alkaline Iron Redox Using Silicate-Sodium Hydroxide Hybrid Electrolytes.

Alkaline iron (Fe) batteries are attractive due to the high abundance, low cost, and multiple valent states of Fe but show limited columbic efficiency and storage capacity when forming electrochemically inert Fe3O4 on discharging and parasitic H2 on charging. Herein, sodium silicate is found to promote Fe(OH)2/FeOOH against Fe(OH)2/Fe3O4 conversions. Electrochemical experiments, operando X-ray characterization, and atomistic simulations reveal that improved Fe(OH)2/FeOOH conversion originates from (i) strong interaction between sodium silicate and iron oxide and (ii) silicate-induced strengthening of hydrogen-bond networks in electrolytes that inhibits water transport. Furthermore, the silicate additive suppresses hydrogen evolution by impairing energetics of water dissociation and hydroxyl de-sorption on iron surfaces. This new silicate-assisted redox chemistry mitigates H2 and Fe3O4 formation, improving storage capacity (199 mAh g-1 in half-cells) and coulombic efficiency (94 % after 400 full-cell cycles), paving a path to realizing green battery systems built from earth-abundant materials.

Hofmeister Effects in Supramolecular Chemistry for Anion-Modulation to Stabilize Zn Anode.

Aqueous Zn-ion batteries (AZIBs) are considered as promising candidates for the next-generation large-scale energy storage, which, however, is facing the challenge of instable Zn anodes. The anion is pivotal in the stability of anodes, which are not being paid enough attention to. Herein, the modulation of anions is reported using the Hofmeister series in supramolecular chemistry to boost the stability of Zn anodes. It is found that the right-side anions in the Hofmeister series (e.g., OTf-) can enhance the Zn2+ transference number, increase the Coulombic efficiency, facilitate uniform Zn deposition, reduce the freezing point of electrolytes, and thereby stabilize the Zn anodes. More importantly, the right-side anions can form strong interaction with ß-cyclodextrin (ß-CD) compared to the left-side anions, and hence the addition of ß-CD can further enhance the stability of Zn anodes in OTf--based electrolytes, showing enhancement of cycling lifespan in the Zn//Zn symmetric cells more than 45.5 times with ß-CD compared with those without ß-CD. On the contrary, the left-side anions show worse rate performance after the addition of ß-CD. These results provide an effective and novel approach for choosing anions and matching additives to stabilize the anodes and achieve high-performance AZIBs through the Hofmeister effect.

Stable Zinc Electrode Reaction Enabled by Combined Cationic and Anionic Electrolyte Additives for Non-Flow Aqueous Zn─Br2 Batteries.

Aqueous zinc-bromine batteries hold immense promise for large-scale energy storage systems due to their inherent safety and high energy density. However, achieving a reliable zinc metal electrode reaction is challenging because zinc metal in the aqueous electrolyte inevitably leads to dendrite growth and related side reactions, resulting in rapid capacity fading. Here, it is reported that combined cationic and anionic additives in the electrolytes using CeCl3 can simultaneously address the multiple chronic issues of the zinc metal electrode. Trivalent Ce3+ forms an electrostatic shielding layer to prevent Zn2+ from concentrating at zinc metal protrusions, while the high electron-donating nature of Cl- mitigates H2O decomposition on the zinc metal surface by reducing the interaction between Zn2+ and H2O. These combined cationic and anionic effects significantly enhance the reversibility of the zinc metal reaction, allowing the non-flow aqueous Zn─Br2 full-cell to reliably cycle with exceptionally high capacity (>400 mAh after 5000 cycles) even in a large-scale battery configuration of 15 × 15 cm2.

Interface engineering enabled by sodium dodecyl sulfonate surfactant for stable Zn metal batteries.

Aqueous zinc-ion batteries are emerging as powerful candidates for large-scale energy storage, due to their inherent high safety and high theoretical capacity. However, the inevitable hydrogen evolution and side effects of the deposition process limit their lifespan, which requires rational engineering of the interface between anode and aqueous electrolyte. In this paper, an anionic surfactant as electrolyte additive, sodium dodecyl sulfonate (SDS), is introduced to deliver highly reversible zinc metal batteries. Unlike traditional surfactants, the solvation structure is not affected by SDS, which tends to adsorb on the (002) crystal plane of Zn with the purpose of effectively limiting the water molecules adsorption. Attributed to the natural hydrophobic part of SDS, a dynamic electrostatic shielding layer and a unique hydrophobic interface are constructed on the anode. Assisted by the above merits, the adverse surface corrosion, hydrogen evolution and dendrite growth are significantly inhibited without the sacrifice in the deposition kinetics of Zn ions. As a result, the Zn||Zn symmetric batteries demonstrate an increased cycle life of 2000 h (1 mA cm-2, 1 mA h cm-2) with the presence of SDS additive. Such strategy provides a new avenue for the developing advanced electrolytes to be applied in aqueous energy storage systems.

Synergetic Dual-Additive Electrolyte Enables Highly Stable Performance in Sodium Metal Batteries.

Sodium (Na)-metal batteries (SMBs) are considered one of the most promising candidates for the large-scale energy storage market owing to their high theoretical capacity (1,166 mAh g-1) and the abundance of Na raw material. However, the limited stability of electrolytes still hindered the application of SMBs. Herein, sulfolane (Sul) and vinylene carbonate (VC) are identified as effective dual additives that can largely stabilize propylene carbonate (PC)-based electrolytes, prevent dendrite growth, and extend the cycle life of SMBs. The cycling stability of the Na/NaNi0.68Mn0.22Co0.1O2 (NaNMC) cell with this dual-additive electrolyte is remarkably enhanced, with a capacity retention of 94% and a Coulombic efficiency (CE) of 99.9% over 600 cycles at a 5 C (750 mA g-1) rate. The superior cycling performance of the cells can be attributed to the homogenous, dense, and thin hybrid solid electrolyte interphase consisting of F- and S-containing species on the surface of both the Na metal anode and the NaNMC cathode by adding dual additives. Such unique interphases can effectively facilitate Na-ion transport kinetics and avoid electrolyte depletion during repeated cycling at a very high rate of 5 C. This electrolyte design is believed to result in further improvements in the performance of SMBs.

Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries.

The solid electrolyte interphase (SEI) with lithium fluoride (LiF) is critical to the performance of lithium metal batteries (LMBs) due to its high stability and mechanical properties. However, the low Li ion conductivity of LiF impedes the rapid diffusion of Li ions in the SEI, which leads to localized Li ion oversaturation dendritic deposition and hinders the practical applications of LMBs at high-current regions (>3 C). To address this issue, a fluorophosphated SEI rich with fast ion-diffusing inorganic grain boundaries (LiF/Li3P) is introduced. By utilizing a sol electrolyte that contains highly dispersed porous LiF nanoparticles modified with phosphorus-containing functional groups, a fluorophosphated SEI is constructed and the presence of electrochemically active Li within these fast ion-diffusing grain boundaries (GBs-Li) that are non-nucleated is demonstrated, ensuring the stability of the Li || NCM811 cell for over 1000 cycles at fast-charging rates of 5 C (11 mA cm-2). Additionally, a practical, long cycling, and intrinsically safe LMB pouch cell with high energy density (400 Wh kg-1) is fabricated. The work reveals how SEI components and structure design can enable fast-charging LMBs.

Surface and Bulk Stabilization of Silicon Anodes with Mixed-Multivalent Additives: Ca(TFSI)2 and Mg(TFSI)2.

Silicon is drawing attention as an emerging anode material for the next generation of lithium-ion batteries due to its higher capacity compared with commercial graphite. However, silicon anions formed during lithiation are highly reactive with binder and electrolyte components, creating an unstable SEI layer and limiting the calendar life of silicon anodes. The reactivity of lithium silicide and the formation of an unstable SEI layer are mitigated by utilizing a mixture of Ca and Mg multivalent cations as an electrolyte additive for Si anodes to improve their calendar life. The effect of mixed salts on the bulk and surface of the silicon anodes was studied by multiple structural characterization techniques. Ca and Mg ions in the electrolyte formed relatively thermodynamically stable quaternary Li-Ca-Mg-Si Zintl phases in an in situ fashion and a more stable and denser SEI layer on the Si particles. These in turn protect silicon particles against side reactions with electrolytes in a coin cell. The full cell with the mixed cation electrolyte demonstrates enhanced calendar life performance with lower measured current and current leakage in comparison to that of the baseline electrolyte due to reduced side reactions. Electron microscopy, HR-XRD, and solid-state NMR results showed that electrodes with mixed cations tended to have less cracking on the electrode surface, and the presence of mixed cations enhances cation migration and formation of quaternary Zintl phases stabilizing the bulk and forming a more stable SEI in comparison to baseline electrolyte and electrolyte with single multivalent cations.

Chelating Additive Regulating Zn-Ion Solvation Chemistry for Highly Efficient Aqueous Zinc-Metal Battery.

Aqueous zinc-metal batteries (AZMBs) usually suffered from poor reversibility and limited lifespan because of serious water induced side-reactions, hydrogen evolution reactions (HER) and rampant zinc (Zn) dendrite growth. Reducing the content of water molecules within Zn-ion solvation sheaths can effectively suppress those inherent defects of AZMBs. In this work, we originally discovered that the two carbonyl groups of N-Acetyl-ϵ-caprolactam (N-ac) chelating ligand can serve as dual solvation sites to coordinate with Zn2+, thereby minimizing water molecules within Zn-ion solvation sheaths, and greatly inhibit water-induced side-reactions and HER. Moreover, the N-ac chelating additive can form a unique physical barrier interface on Zn surface, preventing the harmful contacting with water. In addition, the preferential adsorption of N-ac on Zn (002) facets can promote highly reversible and dendrite-free Zn2+ deposition. As a result, Zn//Cu half-cell within N-ac added electrolyte delivered ultra-high 99.89 % Coulombic efficiency during 8000 cycles. Zn//Zn symmetric cells also demonstrated unprecedented long life of more than 9800 hours (over one year). Aqueous Zn//ZnV6O16 ⋅ 8H2O (Zn//ZVO) full-cell preserved 78 % capacity even after ultra-long 2000 cycles. A more practical pouch-cell was also obtained (90.2 % capacity after 100 cycles). This method offers a promising strategy for accelerating the development of highly efficient AZMBs.

Achieving Dendrite-Free Zinc Metal Anodes via Molecule Anchoring and lon-Transport Pumping.

The potential for scale-up application has been acknowledged by researchers for rechargeable aqueous zinc-ion batteries (ZIBs). Nonetheless, the progress of the development is significantly impeded due to the instability of the interface between the zinc anode and electrolyte. Herein, efficient and environmentally benign valine (Val) were introduced as aqueous electrolyte additive to stabilize the electrode/electrolyte interface (EEI) via functional groups in additive molecules, thus achieving reversible dendrite-free zinc anode. The amino groups present in Val molecules have a strong ability to adsorb on the surface of zinc metal, enabling the construction of anchored molecular layer on the surface of zinc anodes. The strongly polar carboxyl groups in Val molecules can act as ion-transport pumps to capture zinc ions in the electric double layer (EDL) through coordination chemistry. Therefore, this reconstructed EEI could modulate the zinc ion flux and simultaneously suppress side reactions and dendritic growth of Zn. Consequently, a long stable cycling up to 1400 h at a high current density of 20 mA cm-2 is achieved. Additionally, Zn//V2O5 full cell with Val additive exhibit enhanced cyclability, retaining 77 % capacity after 3000 cycles, displaying significant potential in promoting the commercialization of ZIBs.

Dual-Parasitic Effect Enables Highly Reversible Zn Metal Anode for Ultralong 25,000 Cycles Aqueous Zinc-Ion Batteries.

The use of electrolyte additives is an efficient approach to mitigating undesirable side reactions and dendrites. However, the existing electrolyte additives do not effectively regulate both the chaotic diffusion of Zn2+ and the decomposition of H2O simultaneously. Herein, a dual-parasitic method is introduced to address the aforementioned issues by incorporating 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIm]OTf) as cosolvent into the Zn(OTf)2 electrolyte. Specifically, the OTf- anion is parasitic in the solvent sheath of Zn2+ to decrease the number of active H2O. Additionally, the EMIm+ cation can construct an electrostatic shield layer and a hybrid organic/inorganic solid electrolyte interface layer to optimize the deposition behavior of Zn2+. This results in a Zn anode with a reversible cycle life of 3000 h, the longest cycle life of full cells (25,000 cycles), and an extremely high initial capacity (4.5 mA h cm-2), providing a promising electrolyte solution for practical applications of rechargeable aqueous zinc-ion batteries.