Comprehensive evaluation of dosimetric impact against position errors in accelerator-based BNCT under different treatment parameter settings.

BACKGROUND: Patients who undergo accelerator-based (AB) boron neutron capture therapy (BNCT) for head and neck cancer in the sitting position are generally uncomfortably immobilized, and patient motion during this treatment may be greater than that in other radiotherapy techniques. Furthermore, the treatment time of BNCT is relatively long (up to approximately 1 h), which increases the possibility of patient movement during treatment. As most BNCT irradiations are performed in a single fraction, the dosimetric error due to patient motion is of greater consequence and needs to be evaluated and accounted for. Several treatment parameters are required for BNCT dose calculation. PURPOSE: To investigate the dosimetric impacts (DIs) against position errors using a simple cylindrical phantom for an AB-BNCT system under different treatment parameter settings. METHODS: The treatment plans were created in RayStation and the dose calculation was performed using the NeuCure® dose engine. A cylindrical phantom (16 cm diameter × 20 cm height) made of soft tissue was modeled. Dummy tumors in the form of a 3-cm-diameter sphere were arranged at depths of 2.5 and 6.5 cm (denoted by T2.5 and T6.5 , respectively). Reference plans were created by setting the following parameters: collimator size = 10, 12, or 15 cm in diameter, collimator-to-surface distance (CSD) = 4.0 or 8.0 cm, tumor-to-blood ratio (T/B ratio) using 18 F-fluoro-borono-phenylalanine = 2.5 or 5.0, and 10 B concentration in blood = 20, 25, or 30 ppm. The prescribed dose was D95%  ≥ 20 Gy-eq for both T2.5 and T6.5 . Based on the reference plans, phantom-shifted plans were created in 26 directions [all combinations of left-right (LR), anterior-posterior (AP), and superior-inferior (SI) directions) and three distances (1.0, 2.0, and 3.0 cm). The DIs were evaluated at D80% of the tumors. The shift direction dependency of the DI in the LR, AP, and SI directions was evaluated by conducting a multiple regression analysis (MRA) and other analyses where required. RESULTS: The coefficients of the MRA of the DIs for LR, AP, and SI shifts were -0.08, 2.16, and -0.04 (p-values = 0.084, <0.01, and 0.334) for T2.5 and -0.05, 2.08, and 0.15 (p-values = 0.526, <0.01, and 0.065) for T6.5 , respectively. The analysis of variance showed that DIs due to the AP shift were significantly greater for smaller collimator sizes on T2.5 and smaller CSD on T6.5 . Dose reduction due to SI or LR (lateral) shifts was significantly greater for smaller collimator sizes on both T2.5 and T6.5 and smaller CSD on T2.5 , according to the Student's t-test. There were no significant differences in the DIs against both the AP shift and the lateral shift between the different T/B ratios and 10 B concentrations. CONCLUSION: The DIs were largely affected by the shift in the AP direction and were influenced by the different treatment parameters.

Effects of Boron Neutron Capture Therapy on the Growth of Subcutaneous Xenografts of Human Colorectal Adenocarcinoma SW-620 in Immunodeficient Mice.

Boron neutron capture therapy (BNCT) can become an instrument for patients with malignant neoplasms of the rectum and colon. Here we evaluate the effectiveness of BNCT performed at the accelerator based epithermal neutron source at G. I. Budker Institute of Nuclear Physics, Siberian Division of Russian Academy of Sciences, in relation to subcutaneous xenografts of human colon adenocarcinoma SW-620 in SCID mice. Utilization of BNCT with boronоphenylalanine (BPA) and sodium borocaptate (BSH), which were injected intravenously into the retroorbital sinus, resulted in a significant decrease in tumor volumes compared to the control group (no radiation).

Current progress and future prospects of the VITA based neutron source.

At the BINP, a pilot accelerator based epithermal neutron source is now in use. Most recent investigations on the facility are related with studying the dark current, X-ray radiation measuring, optimization of H(-)-beam injection and new gas stripping target calibrating. The results of these studies, ways of providing stability to the accelerator are presented and discussed, as well as the ways of creating the therapeutic beam and strategies of applying the facility for clinical use.