Evaluation of polycyclic aromatic hydrocarbon contents in marine products in South Korea and risk assessment using the total diet study.

This study investigated levels of eight polycyclic aromatic hydrocarbons (PAH8) compounds in both raw and processed marine products in South Korea. Katsuobushi exhibited the highest concentration of benzo[a]pyrene, at 14.22 µg/kg, exceeding the European Commission's regulation level of 5.0 µg/kg. The total PAH8 concentration in katsuobushi was 220.5 µg/kg. Among the product categories, shellfish had the highest detection rate (70%), followed by fish (19%) and crustacea (8%), with chrysene being the most prominent PAH8 congener in all marine products. Grilled fish predominantly contained pyrogenic PAHs from combustion byproducts, while shellfish primarily contained petrogenic ones from the aquatic environment. Grilling, smoking, and drying processes significantly contributed to the formation of PAH8 in these food products. Based on the results of a risk assessment using a margin of exposure approach through a total diet study, exposure to PAH8 from marine products is considered to pose low concern to the South Korean population. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01491-y.

The Influence of Planting Sites On the Chemical Compositions of Chrysanthemum morifolium Flowers (Chuju) as Revealed by Py-GC/MS Combined with Multivariate Statistical Analysis.

Chuju, a cultivar of Chrysanthemum morifolium, has been traditionally cultivated for over 2000 years in China for both ornamental and medicinal purposes. To date, investigations into the chemical composition of this plant have indicated that it contains compounds with extensive biological activities, although detailed information on the chemical composition of Chuju remains scarce. In the present study, the chemical compositions of Chuju flowers were investigated across five sites in the core Chuju planting area in Anhui province, China. Analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was used to explore variations in flower chemical fingerprints from different Chuju planting sites. The study identified approximately 200 components in Chuju flowers and stems, including high levels of fatty acids, lipids, polysaccharides and terpenoids. Multivariate statistical analysis indicated that 16 chemical compounds were influential determinants of the chemical fingerprint and could be used to distinguish two clusters in the five core planting areas. The established Py-GC/MS analytical workflow could provide a basis for determining the chemical fingerprints of Chuju and help elucidate that products contain a reproducible content of bioactive compounds and overall quality for potential development of health and medicinal purposes.

Characterization of the flavor profile and dynamic changes in Chinese traditional fish sauce (Yu-lu) based on electronic nose, SPME-GC-MS and HS-GC-IMS.

In this study, flavor characteristics and dynamic change of Chinese traditional fermented fish sauce (Yu-lu) with different fermentation time (2, 4, 6, 8, and 12 months) were analyzed. The electronic nose analyses confirmed a notable flavor change in fish sauce samples from different stages. During the 12-months fermentation, the total volatile compounds in fish sauce increased from 3.9 mg/L to 13.53 mg/L. Acids, aldehydes, esters and phenols were the main aroma substances and their contents gradually increased during the fermentation process. The PCA of GC-MS and GC-IMS showed that fish sauce samples from different fermentation periods can be well distinguished. A total of 110 volatile compounds identified by GC-MS, and 102 volatile compounds were detected by GC-IMS. Among them, 13 compounds were identified by both GC-MS and GC-IMS. The most varieties (49) of volatiles appeared after 8 months of fermentation. The odor activity value (OAV) analysis showed that 10 volatile compounds were considered as characteristic flavor in traditional fish sauce. The variable influence on projections (VIPs) in PLS-DA models constructed by GC-MS and GC-IMS identified 5 and 10 volatile compounds as biomarkers, respectively. Our results revealed the dynamic changes of characteristic flavor in fish sauce in combination of GC-MS and GC-IMS, which provides theoretical basis for the production and flavor regulation of fish sauce.

Identification of odor-active compounds in Nile tilapia (Oreochromis niloticus) from recirculated aquaculture systems: A case study with different depuration procedures.

Off-flavors are a major challenge for companies using recirculated aquaculture systems (RAS). In the presented work, we comprehensively characterize the odorant composition of Nile tilapia (Oreochromis niloticus) raised in RAS and compare the impact of two depuration processes on the odorant composition and aroma profile of the fish. Fish collected from the production tank and after two different tank pre-disinfection approaches in the depuration process (high pH versus H2O2) were investigated. A combined sensory-instrumental investigation revealed the presence of 115 odorants, of which 83 were successfully identified. The compounds decanal, tridecanal, (Z)-1,5-octadien-3-one, octane-2,3-dione, benzophenone, non-3-yn-1-ol, γ-dodecalactone, (Z)-geranylacetone, 2,3-diethyl-5-methylpyrazine, 1-methylpyrrolidin-2-one, 2-acetyl-2-thiazoline, benzothiazole, skatole, and 5α-androst-16-en-3-one were detected with the highest flavor dilution factors and are described for the first time as odor-active compounds in fish from RAS. The results indicate that depuration decreased the levels of 78 different odorants from the fish, including the potent earthy smelling odorants geosmin, isoborneol and 2,3-diethyl-5-methylpyrazine.

Methyltrimethoxysilane modified tin dioxide microspheres with hydrophobic networks and abundant adsorbed oxygen for efficient solid-phase microextraction of polychlorinated biphenyls.

Methyltrimethoxysilane (MTMS) modified tin dioxide microspheres (MTMS/SnO2) were prepared by a facile hydrothermal method and heated reflux reaction strategy. The characterization results indicate that the modification of MTMS induced the formation of a hydrophobic network within the composites, while maintaining abundant adsorbed oxygen species. Subsequently, the MTMS/SnO2 microspheres were used as a solid-phase microextraction (SPME) coating for the efficient extraction and sensitive determination of trace polychlorinated biphenyls (PCBs) in aqueous solutions coupled to gas chromatography-mass spectrometry. MTMS/SnO2 coating exhibited superior extraction performances for PCBs compared with commercial SPME and pure SnO2 microspheres coatings, owing to the hydrophobic crosslinking and adsorbed oxygen-enhanced hydrogen bonding. The proposed analytical method presented respectable linearity in the concentration range 0.25-1000 ng L-1, with low limits of detection varying from 0.036 to 0.14 ng L-1 for seven PCBs and excellent precision, with relative standard deviations of 5.7-9.8% for a single fiber and 8.2-13.1% for five fibers. Finally, the proposed method was successfully used for determination of PCBs in real water with recoveries ranging from 75.8 to 115.6%. This study proposed a new type SPME coating of MTMS/SnO2 microspheres, which extended the potential of SnO2 in capturing and determining organic pollutants.

[Rapid determination of polycyclic aromatic hydrocarbons and phthalates in tap water by SBSE combined with GC-MS].

OBJECTIVE: To develop a method which is used for rapid determination of 16 kinds of polycyclic aromatic hydrocarbons(PAHs) and 16 kinds of phthalates(PAEs) in tap water by stirring rod adsorption extraction(SBSE) combined with gas chromatography-mass spectrometry(GC-MS). METHODS: The twister mixing rod coated with polydimethylsiloxane(PDMS) and ethylene glycol-polydimethylsiloxane(EG-silicone) was used to enrich analyte from 50 mL tap water. The twister mixing rod coated with EG-silicone was directly placed into the sample bottle containing 50 mL of tap water, while fixing the PDMS stir bar on the inner wall of the sample bottle and immersing it in the liquid. Add 5%(W/V) sodium chloride to the sample bottle, followed by adding 5% methanol. Stir at room temperature for 2 hours for extraction. Next, remove the mixing stick and dry its surface. The pre-prepared SBSE was analyzed by TD-GC/MS, with the optimized thermal desorption conditions: desorption temperature 275 ℃, desorption time 15 min, cryofocusing temperature-40 ℃. RESULTS: Regression equations revealed acceptable linearity(correlation coefficients >0.986) across the working-standard range from 200-2000 ng/L for the 32 analytes. The limits of detection(LODs)were further evaluated were from 1.13-121 ng/L. With the optimized pretreatment method, the spiked recoveries of tap samples(200 and 2000 ng/L)were in the range of 62.5%-98.4% with the relative standard deviations(RSDs) of 3.5%-25.3%. CONCLUSION: The established method can realize the rapid detection of high throughput in the laboratory, it is simple, convenient to operate, and the extraction and analysis time is short.

Presence, behaviour, and risk assessment of volatile methylsiloxanes in wastewater: A year-long comprehensive study within a wastewater treatment plant.

The awareness of possible environmental hazards caused by the widespread global use of volatile methylsiloxanes (VMSs) in personal care products (PCPs) and industrial processes has been increasing. Sewage containing these compounds may reach wastewater treatment plants (WWTPs), which are hotspots of their release into the environment. The levels, distribution, and potential risks of VMSs were studied in an unprecedently comprehensive sampling strategy (four seasonal campaigns) along the water line of a WWTP: the main influent entrance (SA1), after the preliminary treatment (SA2), after the primary treatment (SA3) and after the secondary treatment (the treated effluent; SA4). This WWTP was selected as a representative of the conventional set up based on a secondary treatment, allowing a similar approach in numerous facilities worldwide. Seven VMSs (L3, L4, L5, D3, D4, D5, D6) were analysed in wastewater samples by a small-scale liquid-liquid extraction (LLE) protocol, followed by gas chromatography-mass spectrometry (GC-MS), and the cyclic VMSs were dominant at all sampling sites and in all seasons. Considering the whole year, the total VMSs ranged from 0.4 to 22.5 µg L-1 for SA1, 0.03 to 33.7 µg L-1 for SA2, below method detection limit (MDL) to 13.2 µg L-1 for SA3 and 98 %). According to the risk quotients (RQ), only 18 SA4 samples (32 %) presented a minimal risk to the receiving media (0.01 ≤ RQ < 0.1). However, considering the absence of a secondary treatment or a direct discharge without treatment, there may be a risk to the environment.

Fish Fillet Analogue Using Formulation Based on Mushroom (Pleurotus ostreatus) and Enzymatic Treatment: Texture, Sensory, Aromatic Profile and Physicochemical Characterization.

The growing demand for alternative sources of non-animal proteins has stimulated research in this area. Mushrooms show potential in the innovation of plant-based food products. In this study, the aim was to develop prototype fish fillets analogues from Pleurotus ostreatus mushrooms applying enzymatic treatment (ß-glucanase and transglutaminase-TG). A Plackett-Burman 20 experimental design was used to optimize forty variables. Oat flour (OF) exerted a positive effect on the hardness and gumminess texture parameters but a negative effect on cohesiveness and resilience. Soy protein isolate (SPI) exhibited a positive effect on elasticity, gumminess and chewiness, while acacia gum had a negative effect on elasticity, cohesiveness and resilience. After sensory analysis the assay with 1% cassava starch, 5% OF, 5% SPI, 0.1% transglutaminase (240 min/5 °C), 1% coconut oil, 1% soybean oil, 0.2% sodium tripolyphosphate, 0.6% ß-glucanase (80 °C/10 min) and without ß-glucanase inactivation was found to exhibit greater similarity to fish fillet. The classes hydrocarbons, alcohols and aldehydes are the predominant ones in aromatic profile analysis by chromatography and electronic nose. It is concluded that a mushroom-based analogue of fish fillet can be prepared using enzymatic treatment with TG.

Passive sampling of high production volume chemicals and polycyclic aromatic hydrocarbons in urban atmospheres near petrochemical sites: Uptake rate determination and application.

This study describes the use of passive sampling followed by pressurised liquid extraction and gas chromatography-mass spectrometry for monitoring high production volume chemicals (HPVCs), such as benzothiazoles, benzesulfonamides, phthalate esters (PAEs), organophosphate esters, ultraviolet stabilizers, and phenolic antioxidants and polycyclic aromatic hydrocarbons (PAHs) in urban atmospheres close to a petrochemical area. To obtain accurate results when applying passive sampling, the uptake rates of each target compound for the sampling time applied must be known. Firstly, passive sampling was calibrated for two months and uptake rates of HPVCs and PAHs in an urban atmosphere determined using active sampling as the reference method. The obtained results showed experimental diffusive uptake rates between 1.6 m3 day-1 and 27 m3 day-1 for 32 of the target compounds that will allow enable cost-effective long-term monitoring campaigns of HPVCs to be performed. Secondly, the experimentally obtained uptake rates were used to monitor the concentrations of HPVCs and PAHs at six urban sampling sites close to the two petrochemicals parks in Tarragona (Spain) during a period the two months. Regardless of the sampling campaign, PAEs and PAHs were the families of compounds found at the highest concentration levels, with a sum of their mean values of 23 ng m-3 and 20 ng m-3, respectively.

Innovative disposable in-tip cellulose paper (DICP) device for facile determination of pesticides in postmortem blood samples: A proof-of-concept study.

Accurately identifying and quantifying toxicants is crucial for medico-legal investigations in forensic toxicology; however, low analyte concentrations and the complex samples matrix make this work difficult. Therefore, a simplified sample preparation procedure is crucial to streamline the analysis to minimize sample handling errors, reduce cost and improve the overall efficiency of analysis of toxicants. To address these challenges, an innovative disposable in-tip cellulose paper (DICP) device has been developed for the extraction of three pesticides viz. Chlorpyrifos, Quinalphos and Carbofuran from postmortem blood samples. The DICP device leverages cellulose paper strips housed within a pipette tip to streamline the extraction process, significantly reducing solvent usage, time, and labor while maintaining high analytical accuracy. The extraction of pesticides from postmortem blood using the DICP device involves a streamlined process characterized by adsorption and desorption. The diluted blood samples were processed through the DICP device via repeated aspirating and dispensing calyces to adsorb the pesticides onto the cellulose paper. The adsorbed pesticides are then eluted using acetone, which is collected for GC-MS analysis. The method was meticulously optimized, achieving a limit of quantification in the range of 0.009-0.01 µg mL-1. The intra-day and inter-day precisions were consistently less than 5 % and 10 %, respectively, with accuracy ranging from 94-106 %. Relative recoveries for the analytes were observed to be between 60 % and 93.3 %, and matrix effects were determined to be less than 10 %. The method's sustainability was validated with a whiteness score of 98.8, an AGREE score of 0.64, a BAGI score of 70 and ComplexMoGAPI score of 77. Applicability was demonstrated through successful analysis of real postmortem blood samples and proficiency testing samples, highlighting its potential utility in forensic toxicology.

Microplastics are associated with elevated atherosclerotic risk and increased vascular complexity in acute coronary syndrome patients.

BACKGROUND: Microplastics, widely present in the environment, are implicated in disease pathogenesis through oxidative stress and immune modulation. Prevailing research, primarily based on animal and cell studies, falls short in elucidating microplastics' impact on human cardiovascular health. This cross-sectional study detected blood microplastic concentrations in patients presenting with chest pain using pyrolysis-gas chromatography/mass spectrometry and evaluating inflammatory and immune markers through flow cytometry, to explore the potential effects of microplastic on acute coronary syndrome. RESULTS: The study included 101 participants, comprising 19 controls and 82 acute coronary syndrome cases. Notably, acute coronary syndrome patients exhibited elevated microplastic concentrations, with those suffering from acute myocardial infarction presenting higher loads compared to those with unstable angina. Furthermore, patients at intermediate to high risk of coronary artery disease displayed significantly higher microplastic accumulations than their low-risk counterparts. A significant relationship was observed between increased microplastic levels and enhanced IL-6 and IL-12p70 contents, alongside elevated B lymphocyte and natural killer cell counts. CONCLUSION: These results suggest an association between microplastics and both vascular pathology complexity and immunoinflammatory response in acute coronary syndrome, underscoring the critical need for targeted research to delineate the mechanisms of this association. HIGHLIGHTS: 1 Blood microplastic levels escalate from angiographic patency, to angina patients, peaking in myocardial infarction patients. 2 Microplastics in acute coronary syndrome patients are predominantly PE, followed by PVC, PS, and PP. 3 Microplastics may induce immune cell-associated inflammatory responses in acute coronary syndrome patients.

Determination of volatile organic compounds (VOCs) in indoor work environments by solid phase microextraction-gas chromatography-mass spectrometry.

Volatile organic compounds (VOCs) are continuously emitted into the atmosphere from natural and anthropogenic sources and rapidly spread from the atmosphere to different environments. A large group of VOCs has been included in the class of air pollutants; therefore, their determination and monitoring using reliable and sensitive analytical methods represents a key aspect of health risk assessment. In this work, an untargeted approach is proposed for the evaluation of the exposure to volatile organic compounds of workers in an engine manufacturing plant by GC-MS measurements, coupled with solid-phase microextraction (SPME). The analytical procedure was optimized in terms of SPME fiber, adsorption time, desorption time, and temperature gradient of the chromatographic run. For the microextraction of VOCs, the SPME fibers were exposed to the air in two different zones of the manufacturing factory, i.e., in the mixing painting chamber and the engine painting area. Moreover, the sampling was carried out with the painting system active and running (system on) and with the painting system switched off (system off). Overall, 212 compounds were identified, but only 17 were always present in both zones (mixing painting chamber and engine painting area), regardless of system conditions (on or off). Finally, a semi-quantitative evaluation was performed considering the peak area value of the potentially most toxic compounds by multivariate data analyses.

Determination of Anthropogenic Pollutants in Adipose Tissue of the Caspian Seal Pusa caspica Gmelin, 1788 by High-Resolution Accurate Mass Spectrometry.

Tissue contamination with persistent organic pollutants (POPs) in organisms proved possible to comprehensively characterize in a single test by combining gas chromatography and high-resolution accurate mass spectrometry. Adipose tissue samples were collected from two Caspian seals (Pusa caspica Gmelin, 1788) found dead on the Caspian Sea shore in 2020. Organochlorine pesticides, primarily DDT and HCH, and polychlorinated biphenyls (PCBs) were major pollutants found in the Caspian seals. The distribution of metabolites indicated the absence of recent pesticide use. The PCB content was relatively high, but still at the lower limit of the range of values determined previously, as was also the case with pesticides. Chlordanes, polychlorinated naphthalenes, and polybrominated diphenyl ethers were detected in minor quantities and were therefore not considered to be major pollutants of the Caspian seal. The pollutant levels were below a threshold at which a distinct effect on seal health can be expected. High-resolution accurate mass (HRAM) spectrometry was found to provide a convenient tool for both targeted and nontargeted analyses of a wide range of organic pollutants in a single experiment.

Innovative insights into the roasting-driven transformation of volatile compounds and quality markers in flaxseed (Linum usitatissimum L.) oil.

Roasting is essential for developing the characteristic aroma of flaxseed oil (FSO), yet its impact on oil quality remains underexplored. This study employed headspace-gas chromatography-mass spectrometry coupled with multivariate analysis to elucidate the dynamic changes in volatile compounds and quality characteristics of FSO subjected to varying roasting temperatures. Our findings revealed that seven key aroma compounds, identified through the variable importance in the projection scores of partial least square-discrimination analysis models and relative aroma activity value, served as molecular markers indicative of distinct roasting temperatures. These compounds included 2,5-dimethylpyrazine, 2-pentylfuran, (E)-2-pentenal, 2-ethyl-3,6-dimethylpyrazine, heptanal, octanal, and 2-hexenal. Notably, roasting at 200°C was found to enhance oil stability and antioxidant capacity, with phenolic compounds and Maillard reaction products playing synergistic roles in bolstering these qualities. Network analysis further uncovered significant correlations between these key aroma compounds and quality characteristics, offering novel perspectives for assessing FSO quality under diverse roasting conditions. This research not only enriched our understanding of the roasting process's impact on FSO but also provided valuable guidance for the optimization of industrial roasting practices. This study would provide important practical applications in aroma regulation and process optimization of flaxseed oil. .

Determination of amphetamines in hair samples using microextraction by packed sorbent and gas chromatography-mass spectrometry.

Several protocols for the analysis of amphetamine-type stimulants (ATS) in hair have been developed over the years, with microextraction by packed sorbent (MEPS) being used for drugs like opiates, cocaine and ketamine. However, concerning ATS determination in hair samples, this approach has only been applied so far to amphetamine (AMP) and methamphetamine (MAMP). This study aimed at developing and validating a MEPS-based procedure for the determination in hair of not only AMP and MAMP but also of 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), 1-(1,3-benzodioxol-5-yl)propan-2-yl (ethyl)amine (MDE) and N-methyl-1-(1,3-benzodioxol-5-yl)-2-aminobutane (MBDB) as well. Hair, 50 mg, was incubated with 1 M sodium hydroxide (NaOH) at 45°C overnight, neutralization with 10 M hydrochloric acid (HCl) and centrifugation followed. The design of experiments approach was used for MEPS optimization, with the final optimized conditions including conditioning (250 µL methanol and deionized water), loading (18 × 100 µL) and elution (7 × 100 µL 2% NH4OH in acetonitrile). The eluted extract was evaporated to dryness and underwent microwave-assisted derivatization with N-methyl-bis(trifluoroacetamide) (MBTFA), and it was afterwards injected onto the gas chromatography-mass spectrometer (GC-MS). The obtained recoveries ranged between 8% and 14% for AMP, 14% and 20% for MAMP, 10% and 15% for MDA, 18% and 28% for MDMA, 25% and 43% for MDE and 34% and 52% for MBDB, and the method was linear from 0.2 to 5.0 ng/mg. Precision and accuracy were in accordance with international method validation guidelines. This novel method involving MEPS coupled to GC-MS offers a swift, eco-friendly and cost-effective alternative to traditional procedures for detecting these AMPs in hair samples.

The morphology of the pygidial glands and the chemical composition of their secretions of four sphodrine ground beetle species (Carabidae: Platyninae).

Ground beetles possess a pair of pygidial glands that produce and release secretions that play an important role in defense against predators. The morphology of these glands and the chemical composition of their products were studied in four species of the tribe Sphodrini: Calathus (Calathus) fuscipes (Goeze, 1777), C. (Neocalathus) cinctus Motschulsky, 1850, C. (N.) melanocephalus (Linnaeus, 1758) and Laemostenus (Antisphodrus) elongatus (Dejean, 1828). The morphological analyzes of the glands of the four taxa mentioned were carried out for the first time using bright-field and nonlinear microscopy. All morphological structures were precisely measured and photographed. The pygidial gland secretions of C. (C.) fuscipes and L. (A.) elongatus were analyzed for the first time using gas chromatography-mass spectrometry. A total of 30 compounds were detected from the extracts of pygidial gland secretions of the four Sphodrini species studied. The simplest chemical mixture was found in L. (A.) elongatus, while the most complex secretion was that of C. (C.) fuscipes. 1-Undecanol, which we were able to detect in all taxa examined here, and dodecyl butyrate, which was detected in the three Calathus species, have never before been detected in the secretions of ground beetles.

Discrepancies between the stated contents and analytical findings for electronic cigarette liquid products: Identification of the new cannabinoid, Δ9-tetrahydrocannabihexol acetate.

A number of synthetic cannabinoids have been appearing in the recreational drug market for more than a decade. Recent additions are so-called semi-synthetic cannabinoids, and they structurally closely resemble the main psychoactive component of cannabis, Δ9-tetrahydrocannabinol. Knowledge of new (semi-)synthetic cannabinoids is essential to help identify them in authentic forensic case samples. Therefore, the aim of the study was to examine two commercially available electronic cigarette liquid products claiming to contain cannabinoids and characterize the structures of the main compounds. The liquid products were analyzed by gas chromatography-mass spectrometry (GC-MS), GC-quadrupole time-of-flight mass spectrometry (GC-QTOF-MS), and liquid chromatography-high-resolution mass spectrometry (LC-HRMS). In product A, typical cannabinoids (cannabidiol, cannabigerol, and cannabinol) and terpenes (α-caryophyllene and ß-caryophyllene) were identified by comparison with reference materials. An unknown peak was isolated by semi-preparative high-performance LC, analyzed by nuclear magnetic resonance (NMR) spectroscopy, and identified to be Δ9-tetrahydrocannabihexol acetate (Δ9-THCH-O). To the authors' knowledge, this is the first report of the identification of Δ9-THCH-O in commercially available products. Another compound estimated as cannabihexol acetate was also detected. In product B, cannabidiol, cannabinol, α-caryophyllene, and ß-caryophyllene were identified, while two unknown peaks were estimated as tetrahydrocannabidiol isomers. Despite products A and B being labeled to contain "60% HHCPM" and "80% 10-OH-HHC," respectively, no such compounds were detected. The findings of this study could help detect Δ9-THCH-O in case samples and highlight the need to keep monitoring commercial products to identify new drugs, while warning that the package labels cannot be trusted.

GC-MS-based untargeted plasma metabolomics identifies a 2-biomarker panel for possible diagnosis of precancerous cervical intraepithelial neoplasia stages from cervical cancer.

Cervical cancer (CC) remains a major health concern globally, much of the brunt of which is experienced by the low- and middle-income countries where screening in terms of cytology and DNA genotyping for the high-risk oncogenic subtypes of the human papilloma virus (hr-HPV) is either inadequate or performed rather late. In this study, we aimed to determine biomarkers or panels of biomarkers that are capable of diagnosing the precancerous cervical intraepithelial neoplasia (CIN) stages from healthy and CC patients via untargeted gas chromatography-mass spectrometry-based metabolomics. Various cross-comparisons were conducted from which differential metabolites were identified. The underlying metabolic pathways based on the differential metabolites identified from the various cross-comparisons mainly related to amino acids biosynthesis and metabolism and steroid hormone biosynthesis. From all cross-comparisons, two common metabolites namely, 2-methyl-1-propylamine (also known as isobutylamine) and estrone were found to possess excellent to good diagnostic abilities, especially in distinguishing the early stages of CIN (CIN I, CIN II) from healthy women and CC patients. These findings have clinical significance in the sense that, once validated the 2-biomarker panel could be adopted in clinical practice for early diagnosis of CIN and invasive carcinoma. This would therefore inform the choice of treatment to be initiated by the clinician.

Metabolic profiling and biomarkers identification in cluster bean under drought stress using GC-MS technique.

INTRODUCTION: The Cluster bean is an economically significant annual legume, widely known as guar. Plant productivity is frequently constrained by drought conditions. OBJECTIVE: In this work, we have identified the untargeted drought stress-responsive metabolites in mature leaves of cluster beans under drought and control condition. METHODS: To analyse the untargeted metabolites, gas chromatography-mass spectrometry (GC-MS) technique was used. Supervised partial least-squares discriminate analysis and heat map were used to identify the most significant metabolites for drought tolerance. RESULTS: The mature leaves of drought-treated C. tetragonoloba cv. 'HG-365' which is a drought-tolerant cultivar, showed various types of amino acids, fatty acids, sugar alcohols and sugars as the major classes of metabolites recognized by GC-MS metabolome analysis. Metabolite profiling of guar leaves showed 23 altered metabolites. Eight metabolites (proline, valine, D-pinitol, palmitic acid, dodecanoic acid, threonine, glucose, and glycerol monostearate) with VIP score greater than one were considered as biomarkers and three metabolite biomarkers (D-pinitol, valine, and glycerol monostearate) were found for the first time in guar under drought stress. In this work, four amino acids (alanine, valine, serine and aspartic acid) were also studied, which played a significant role in drought-tolerant pathway in guar. CONCLUSION: This study provides information on the first-ever GC-MS metabolic profiling of guar. This work gives in-depth details on guar's untargeted drought-responsive metabolites and biomarkers, which can plausibly be used for further identification of biochemical pathways, enzymes, and the location of various genes under drought stress.

Analysis of chlordecone and its transformation products in environmental waters by a new SPME-GC-MS method and comparison with LLE-GC-MS/MS and LLE-LC-MS/MS: A case study in the French West Indies.

Among the numerous organochlorines (OCs) applied in the French West Indies (FWI), chlordecone (hydrated form C10Cl10O2H2; CLD) still causes major environmental pollution nowadays. A recent report revealed the unexpected presence in FWI environment of transformation products (TPs) of CLD not routinely monitored due to a lack of commercial standards. Here, we present a method for surface waters and groundwaters to analyze CLD, its main TPs (hydroCLDs, chlordecol (CLDOH), 10-monohydroCLDOH and polychloroindenes) and other OCs. We developed an SPME-GC-SIM/MS method with a PDMS-DVB fiber. Since CLDOH-d commonly used as internal standard (IS) proved unsuitable, we synthesized several IS candidates, and finally identified 10-monohydro-5-methyl-chlordecol as a satisfactory IS for CLDOH and 10-monohydroCLDOH avoiding the use of 13C-labelled analogue. LODs for CLD and its TPs varied from 0.3 to 10 ng/L, equal to or below LODs of the two laboratories, BRGM (the French geological survey) and LDA26 (one of the French Departmental Analytical Laboratories), requested in FWI pollution monitoring that used liquid-liquid extractions and advanced facilities (LLE-GC-MS/MS and LLE-LC-MS/MS methods, respectively). Then, we extended the multi-residue method to 30 OCs (CLD and its TPs, mirex, ß-HCH, lindane, dieldrin, aldrin, HCB, hexachlorobutadiene, TCE, PCE) and applied it to 30 surface and ground waters from FWI. While CLD, 8- and 10-monohydroCLD, CLDOH, 10-monohydroCLDOH, dieldrin, and ß-HCH were detected and quantified, pentachloroindene, another CLD TP, was sporadically found in trace levels. A comparison with BRGM and LDA26 confirmed the interest of the SPME method. Results suggested an underestimation of CLDOH and an overestimation of high CLD concentrations with one of the currently used routine protocol. In light of these findings, previous temporal monitoring of environmental waters in FWI were re-examined and revealed some atypical values, which may indeed be due to analytical bias. These discrepancies call for intensified efforts to reliably quantify CLD and its TPs.