Análise do diâmetro de cones acessórios calibrados por réguas calibradoras / Diameter analysis of accessory cones calibrated by calibrating rulers

O objetivo do presente estudo foi de comparar o diâmetro dos cones acessórios FM EL calibrados por duas réguas calibradoras com seus respectivos diâmetros nominais. Foram calibrados 80 cones de guta percha FM EL (Odous de Deus) utilizando duas réguas calibradoras das seguintes marcas: Prisma e Denco. Os cones foram divididos em 8 grupos (n=10) de acordo com a régua e com o diâmetro em que foram calibrados. Posteriormente, os cones foram fotografados e tiveram seus D0 mensurados através do software ImageJ. Após a realização da análise estatística utilizando-se os testes de Normalidade de Shapiro-Wilk e o teste t Student (Distribuição Normal), obteve-se os seguintes resultados: não houve diferença estatisticamente significativa com o valor de referência na régua prisma nos cones 40, isto é, em todas as outras situações encontrou-se diferença com os valores de referência. Quando foram comparados os valores das medianas e desvio padrão das duas réguas calibradoras também houve diferença estatisticamente significativa (p<0,05) nos cones 25, 35 e 40. Os cones acessórios FM EL (Odous de Deus) calibrados com a régua Denco diferiram dos diâmetros nominais da régua. Assim, deve-se estar atento à exatidão e precisão desses instrumentos a fim de se evitar possíveis erros de mensuração e interpretação capazes de comprometer o êxito da obturação no tratamento endodôntico.

The aim of the present study was to compare the diameter of the FM EL accessory cones calibrated by two calibrating rulers with their respective nominal diameters 80 FM EL gutta percha cones (Odous of God) were calibrated using two calibrating culers of the following brands: Prisma and Denco. The cones were divided in 8 groups (n=10) according to the ruler and the diameter in which they were calibrated. Posteriorly, the cones were photographed and nad their D0 neasured through the software ImageJ. After performing the statistical analysis using the Shapiro- Wilk Normality tests and the Student T test (Normal Distribution), the following results were obtained: there was no stastistically significant difference with the reference value in the prism rule in the cones 40, that is, in all other situations, a difference was found with the reference values. When the median values and standard deviation of the two calibrating rulers were compared, there was also a statistically significant difference (p<0,05) in cones 25, 35 and 40. The FM EL (Odous of God) accessory cones calibrated eita the Denco ruler differed from the nominal diameters of the ruler. Thus, one must pay attention to the accuracy and precision of these instruments in order to avoid possible errors of measurement and interpretation capable of compromising the success of filling in endodontic treatment.

Standardization of variable taper files and corresponding gutta-percha cones amongst manufacturers.

INTRODUCTION: Currently there is no standardization of variable taper endodontic files and corresponding gutta-percha (GP) cones. The aim of this study was to evaluate intra- and inter- manufacturer variability of diameter and taper in the apical third of GP master cones and finishing files from three commercially available variable taper endodontic systems. METHODS: Diameter measurements were recorded using digital microscopy at 1mm increments (D1-D4) for F2 files and corresponding GP cones (n = 20 per system) from ProTaper Gold® (Dentsply Tulsa Dental Specialties, Johnson City, TN), EdgeTaper Platinum™ (EdgeEndo, Albuquerque, NM), and ExactTaper H™ (SS White, Lakewood, NJ). Taper was defined as the rate of change in diameter per 1mm increment. Mean differences in diameter were assessed using repeated measures of analysis of variance (ANOVA) for D1 to D4 and the Wilks test for differences in taper. RESULTS: In the apical third, ProTaper and EdgeEndo mean file diameters were significantly smaller than corresponding GP cone diameters (p<0.01, p<0.01, respectively). Contrastingly, SS White file diameters were significantly larger than their corresponding GP cones (p=0.02). Files from all manufacturers had significantly smaller diameters than advertised (nominal) values (p<0.01). ProTaper GP cones had similar diameters to nominal values (p=0.30), while EdgeEndo and SS White GP cones were significantly smaller (p<0.01). Amongst files and corresponding GP cones from all systems, taper was non-standardized. CONCLUSIONS: Size discrepancies between finishing files and corresponding GP cones can be expected amongst variable taper endodontic systems. Therefore, clinicians should be prepared to make intra-operative adjustments when obturating.

Impact of Solvent Properties of Cold-Pressed and Steam-Distilled Orange Oils on GuttaFlow2 and Gutta-Percha.

INTRODUCTION: Root canal retreatment often employs organic solvents like chloroform, eucalyptol, and orange oil. However, studies comparing their effectiveness yield inconsistent results. The quantity of d-limonene, a crucial component in orange oil, varies depending on the oil production method. Cold-pressed orange oil has been observed to contain the highest d-limonene levels. This study investigates the comparative solvent effects of cold-pressed and steam-hydrodistilled orange oils on gutta-percha and GuttaFlow2, typically used components in root canal fillings. METHODS: Thirty-two discs (10 mm in diameter and 2 mm in thickness) were prepared using GuttaFlow and gutta-percha cones. The samples were weighed and then randomly divided into four groups (n=8) based on the type of solvent used. Each group was immersed in its respective solvent for 10 minutes. After exposure to the solvent, the samples were reweighed to determine the amount of material removed. RESULTS: The weight loss in the group treated with cold-pressed orange oil on gutta-percha was significantly higher than in other groups (GuttaFlow2 + cold-pressed orange oil, gutta-percha + steam hydrodistilled orange oil, GuttaFlow2 + steam hydrodistilled orange oil) (p<0.001, p<0.001, and p<0.001). CONCLUSION: According to the study findings, cold-pressed orange oil demonstrated a higher solvent effect on both GuttaFlow2 and traditional gutta-percha compared to steam-hydrodistilled orange oil. This indicates the significant impact of the production method of orange oil on its efficacy as a solvent in root canal therapy retreatment.

Effect of three different root canal sealants on human dental pulp stem cells.

The cytotoxic effects of three root canal sealers with different bases on human dental pulp stem cells were assessed in this study using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) test. The cytotoxic effects of three root canal sealers with different bases on human dental pulp stem cells (DPSCs) were assessed in this study using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) test. The cytotoxicity of the sealers was tested after one, 4, and 7 d. Human dental pulp stem cell proliferation was concluded using an MTT assay. Cells not treated with sealer extract were used as controls. The absorption levels were measured using an Eliza spectrophotometer. P was set at 0.05 when the percentage of cell proliferation was matched between groups and observation times using one-way analysis of variance (ANOVA).During the second passage (P2), human dental pulp stem cells displayed a single morphological and phenotypic trait, with fibroblast morphology being the most common. There were no appreciable variations between the four groups after a day. There was a notable variation in the average percentage of cell proliferation between the groups after 4 and 7 days. The control group had the highest percentage, followed by the GuttaFlow Bioseal group, the Well Root St group, and the AH-Plus group, which had the lowest percentage. For every sealing group, after one day, the highest mean percentage of cell proliferation was recorded, followed by day four, and after day seven, the lowest mean percentage. The observation periods showed minimal cytotoxic effects of GuttaFlow Bioseal, whereas AH-Plus was the most cytotoxic to human dental pulp stem cells. The highest mean percentage of cell proliferation for all sealers was recorded on day one.

Comparative Evaluation of Different Obturation Techniques for Root Canal Filling of Permanent Teeth: An In-Vitro Study.

INTRODUCTION: Achieving success in root canal (RC) therapy relies on three key components: comprehensive cleaning of the canal, efficient disinfection, and proper filling of the canal space. The present study aimed to compare the efficacy of four obturation techniques: single cone (SC), GuttaCore (GC), cold lateral condensation (LC), and C Point system for RC filling of permanent teeth. MATERIALS AND METHODS: 76 extracted human mandibular first premolars were divided into four groups, with 19 teeth in each group (group A, obturation with SC technique; group B, obturation with GC; group C, obturation with LC; and group D, obturation with C Point system). The samples were marked at 4 mm and 8 mm from the root apex using a marker and calliper, sectioned horizontally, and analyzed under a stereomicroscope at 20x magnification. The mean percentage (%) of gutta-percha (GP)-filled area was compared using a two-way analysis of variance (ANOVA), followed by the Bonferroni post-hoc test. RESULTS: The mean percentage of GP-filled area at a distance of 4 mm from the apex was highest in group B (0.86±0.04; 95% CI: 0.845-0.881), followed by group D (0.70±0.07; 95% CI: 0.664-0.736), group A (0.61±0.05; 95% CI: 0.595-0.642), and least in group C (0.58±0.09; 95% CI: 0.543-0.627), and the difference was statistically significant (p≤0.05). The post-hoc pairwise comparison of groups at 4 mm revealed that there were statistically significant differences between group D and groups B, C, and A (p ≤ 0.001). The mean percentage of the GP area at a distance of 8 mm from the apex was highest in group B (0.81±0.10; 95% CI: 0.761-0.861), followed by group D (0.75±0.07; 95% CI: 0.725-0.792), group A (0.69±0.07; 95% CI: 0.658-0.729), and lowest in group C (0.65±0.10; 95% CI: 0.607-0.709), and this difference was statistically significant (p≤0.05). Post-hoc pairwise comparison of groups at 8 mm revealed that there was a statistically significant difference between groups D and C (p=0.006), whereas no statistically significant differences were noted between groups D and B (p=0.473). Furthermore, no statistically significant differences were noted between groups C and A at 4 mm and 8 mm (p>0.05). CONCLUSION: Obturation with the GC system provided the best results in terms of the percentage of GP-filled area at 4 mm. However, at 8 mm from the apical region, both the GC and C Point systems provided similar results.

Marginal adaptation of customized gutta percha cone with calcium silicate based sealer versus MTA and biodentine apical plugs in simulated immature permanent teeth (an in vitro study).

BACKGROUND: This study aimed to compare the marginal adaptation of a single customized gutta percha cone with calcium silicate-based sealer versus mineral trioxide aggregate (MTA) and Biodentine apical plugs in simulated immature permanent teeth. METHODS: Thirty-nine extracted human maxillary anterior teeth were selected, prepared to simulate immature permanent teeth with an apical diameter 1.1 mm, placed in moist foam and divided into three groups. Group 1: Obturation with a single customized gutta percha cone and calcium silicate sealer. Group 2: MTA apical plug. Group 3: Biodentine apical plug. After incubation, teeth were horizontally sectioned at 1 mm and 3 mm from the apex and marginal adaptation was evaluated using scanning electron microscope (SEM). RESULTS: Biodentine showed the least mean gap size at both 1 and 3 mm from the apex with no statistically significant differences compared to MTA (p > 0.05). The single customized cone with calcium silicate based sealer showed the greatest mean gap size at both 1 and 3 mm from the apex with a statistically significant difference compared to the other groups (p < 0.001). CONCLUSION: Biodentine and MTA apical plugs provide a significantly better marginal adaptation to the dentinal walls than a single customized gutta percha cone with calcium silicate based sealer in simulated immature permanent teeth.

Efficiency of Different Retrieval Techniques in Gutta-Percha Removal in Endodontic Retreatment: An In Vitro Study.

Objective: The purpose of this in vitro investigation was to assess the effectiveness of various gutta-percha retrieval methods in endodontic retreatment. Methods: Five groups were randomly allocated to extract human teeth that had already had root canal therapy: manual files, rotary tools, heat, solvents, and ultrasonics. By evaluating the amount of filling material still present, gutta-percha clearance was quantitatively examined, and root canal cleanliness was qualitatively appraised. To compare the effectiveness of retrieval approaches, statistical analysis was done. Findings: Hand files, heat, and solvents were less effective than rotary devices and ultrasonics at removing gutta-percha (P < 0.05). A quantitative investigation showed that the groups using rotary instruments (0.87 mm) and ultrasonics (0.68 mm) had much less gutta-percha left. The qualitative evaluation revealed that rotary instruments (2.12) and ultrasonics (2.45) had greater cleaning ratings compared to other methods. Conclusion: In conclusion, gutta-percha can be effectively removed during endodontic retreatment by using rotary tools and ultrasonics, which provide both quantitative efficiency and qualitative purity. The implementation of sophisticated retrieval procedures to maximize treatment results in clinical practice is supported by these findings.

Comparing Warm and Cold Gutta-Percha Techniques for Root Canal Filling: An In Vitro Study.

Background: Gutta-percha is commonly used in endodontic therapy for obturating root canals after cleaning and shaping procedures. Warm and cold gutta-percha techniques are two common methods employed for obturation, each with its own advantages and limitations. Materials and Methods: Twenty extracted human teeth with single-rooted canals were selected and divided into two groups: warm gutta-percha obturation and cold gutta-percha obturation. In the warm gutta-percha group, gutta-percha was heated to a predetermined temperature using a warm gutta-percha heating device and injected into the root canal using a heated carrier. In the cold gutta-percha group, gutta-percha was applied directly to the root canal without prior heating. Root canal obturation quality was assessed using radiographic imaging to evaluate the presence of voids, completeness of obturation, and adaptation to the canal walls. Micro-computed tomography (micro-CT) analysis was also performed to quantify the volume of obturating material and assess the three-dimensional distribution of gutta-percha within the root canal space. Results: Both warm and cold gutta-percha techniques demonstrated effective obturation of root canals, with comparable outcomes in terms of void formation, completeness of obturation, and adaptation to canal walls. However, micro-CT analysis revealed differences in the volume and distribution of gutta-percha within the root canal space. Warm gutta-percha obturation exhibited more uniform distribution of gutta-percha material and higher volumetric filling compared to cold gutta-percha obturation. Additionally, the warm gutta-percha technique demonstrated superior flowability and adaptation to irregularities within the root canal system. Conclusion: In this in vitro study, warm gutta-percha obturation demonstrated advantages over cold gutta-percha obturation in terms of volumetric filling, distribution within the root canal space, and adaptation to canal irregularities.

Assessment of Factors Affecting the Success of Endodontic Retreatment Procedures.

Background: Endodontic retreatment is crucial for preserving dental health but is influenced by various factors. Objective: This research aimed to assess factors affecting the success of endodontic retreatment procedures. Methods: A retrospective analysis was conducted on 250 cases of endodontic retreatment. Demographic and clinical data were collected, and treatment success was defined based on predetermined criteria. Statistical analysis was performed to evaluate associations between treatment factors and retreatment outcomes. Results: The overall success rate was 75%. Rotary instrumentation, gutta-percha obturation, and use of intracanal medication were significantly associated with higher retreatment success rates (P < 0.05). Conclusion: Factors such as instrumentation type, obturation material, and intracanal medication significantly influence endodontic retreatment success. Understanding and optimizing these factors are crucial for improving treatment outcomes and patient satisfaction.

Evaluation of the Sealing Ability of Various Root Canal Obturation Techniques in Permanent Molars: An In vitro Study.

Background: Achieving a reliable seal in root canal obturation is essential for the success of endodontic treatment. Despite the availability of multiple techniques, the comparative sealing abilities of these methods remain a topic of investigation, particularly in permanent molars. Materials and Methods: This in vitro study involved 60 extracted permanent molars, divided randomly into three groups: Group A (lateral compaction), Group B (thermoplasticized gutta-percha), and Group C (single cone). After instrumentation and obturation, the sealing ability was assessed using a dye penetration method. Arbitrary values were assigned to quantify the extent of dye penetration. Results: The mean dye penetration values were as follows: Group B (thermoplasticized gutta-percha) had the lowest penetration (2.1 ± 0.3 mm), followed by Group A (lateral compaction) (3.5 ± 0.4 mm), and Group C (single cone) exhibited the highest penetration (5.2 ± 0.6 mm). Conclusion: In this study, thermoplasticized gutta-percha demonstrated superior sealing ability compared to lateral compaction and single cone techniques in permanent molars. These findings underscore the importance of selecting an effective obturation technique to ensure optimal seal integrity in root canal therapy.

Degree of Contamination of Gutta-Percha Points by Staphylococcus aureus (MRSA/MSSA) Strains.

Methicillin-resistant Staphylococcus aureus (MRSA) is considered one of the most harmful bacteria to human health. Dentistry, like all healthcare disciplines, places great emphasis on preventing scenarios that may result in cross-infection. Although various tested and already used materials are suitable for filling the root canal system, Gutta-Percha (GP) remains the preferred and widely accepted gold standard. OBJECTIVE: We performed an in vitro analysis of the contamination of GP points, regarding the strains of Methicillin-resistant (MRSA) and Methicillin-sensitive (MSSA) Staphylococcus aureus, using classical microbiology methods and molecular biology techniques. METHODS: Gutta-Percha points of two different brands from opened packages (already in use for 1 month) were collected for analysis. The assessment involved incubating the GP points in Brain Heart Infusion (BHI) medium to detect microbial growth. Growing microorganisms were plated on a selective and differential chromogenic medium for MRSA/MSSA strains, and the identification of isolates was confirmed by Polymerase Chain Reaction (PCR). In the case of microbial growth, the GP point was submitted to a disinfection protocol. RESULTS: From the 315 collected GP points, only 6 (1.9%) resulted in being positive for microbial growth. After confirmation by PCR, only one sample of the six GP points was contaminated by MRSA, and the remaining five were MSSA-contaminated. The disinfection protocol was effective in all contaminated GP points. CONCLUSIONS: The Gutta-Percha points from opened pre-sterilized packages showed a very low degree of contamination by MRSA/MSSA. However, the detection of MSSA and MRSA strains raises concerns about potential contamination in dental clinic environments, and this risk cannot be considered negligible.

Management of Endodontic Disease for Odontogenic Sinusitis.

Primary dental treatments for odontogenic sinusitis (ODS) due to endodontic infections (pulpal necrosis and apical periodontitis ± periapical abscess) include extraction and root canal treatment (RCT). Published evidence is lacking on the success of primary endodontic treatment for purulent ODS, with the majority of RCT-related series reporting on its success at resolving reactive maxillary sinus mucositis. Dental extraction is the most definitive treatment of endodontic disease causing ODS, but compromises the functional dentition and still often fails to resolve the purulent sinusitis. This article highlights key concepts of RCT and dental extraction techniques, as well as their published success at resolving ODS.

Effectiveness of photosensitized curcumin fibers, aloevera, amla juice and panchatulsi in disinfecting guttapercha cones.

Herbal remedies have demonstrated remarkable effects as anti-diabetic, anticancer, antimicrobials, immunological modulatory agent in liver problems, respiratory illnesses, and as beauty agents. The need for more affordable, readily accessible, and alternative medicines has led to a rise in the recognition of herbal drugs. Therefore, it is of interest to evaluate and compare the effectiveness of photosensitized curcumin fibers, Aloevera, Amla Juice and Pancha Tulsi in disinfecting guttapercha (GP) cones. It was observed that all experimental disinfectants were found to have greater antimicrobial action than the positive control in which no disinfectant was used. The order of antimicrobial action among different experimental disinfectants against Staphylococcus aureus and Enterococcus faecalis in disinfection of GP cones was in following order PanchaTulsi>Curcumin fibers >Amla juice > Aloe vera. It was concluded that all herbal disinfectants were found to have antimicrobial effectiveness in disinfection of GP cones with Panchtulsi having maximum disinfectant ability followed by photosensitized curcumin fibres.

Nanostructured ZnO thin film to enhance gutta-percha's adhesion to endodontic sealers.

BACKGROUND: Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkable features due to their considerable bond strength, good optical quality, and excellent piezoelectric, antibacterial, and antifungal properties, offering many potential applications in various fields. This study aimed to explore the influence of GP surface's functionalization with a nanostructured ZnO thin film on its adhesiveness to endodontic sealers. METHODS: Conventional GP samples were divided randomly into three groups: (a) Untreated GP (control); (b) GP treated with argon plasma (PT); (c) Functionalized GP (PT followed by ZnO thin film deposition). GP's surface functionalization encompassed a multi-step process. First, a low-pressure argon PT was applied to modify the GP surface, followed by a ZnO thin film deposition via magnetron sputtering. The surface morphology was assessed using SEM and water contact angle analysis. Further comprehensive testing included tensile bond strength assessment evaluating Endoresin and AH Plus Bioceramic sealers' adhesion to GP. ANOVA procedures were used for data statistical analysis. RESULTS: The ZnO thin film reproduced the underlying surface topography produced by PT. ZnO thin film deposition decreased the water contact angle compared to the control (p < 0.001). Endoresin showed a statistically higher mean bond strength value than AH Plus Bioceramic (p < 0.001). There was a statistically significant difference between the control and the ZnO-functionalized GP (p = 0.006), with the latter presenting the highest mean bond strength value. CONCLUSIONS: The deposition of a nanostructured ZnO thin film on GP surface induced a shift towards hydrophilicity and an increased GP's adhesion to Endoresin and AH Bioceramic sealers.

Research on the Performance and Modification Mechanism of Gutta-Percha-Modified Asphalt.

Presently, there is a significant focus on the investigation and advancement of polymer-modified asphalt that is both high-performing and environmentally sustainable. This study thoroughly examined the performance and modification mechanism of gutta-percha (GP) as a novel asphalt modifier. The investigation was conducted using a combination of macro- and microscopic testing, as well as molecular dynamics simulations. This work primarily examined the compatibility of GP with asphalt molecular modeling. This paper used molecular dynamics to identify the most suitable mixing temperature. Next, the gray correlation theory was used to discuss the most effective method for preparing gutta-percha-modified asphalt (GPMA). The macro-rheological tests and microscopic performance analysis provided a full understanding of the impact of GP on asphalt properties and the process of alteration. The findings indicate that eucommia ulmoides gum (EUG) exhibits good compatibility with asphalt, while sulfur-vulcanized eucommia ulmoides gum (SEUG) does not demonstrate compatibility with asphalt. Both EUG and SEUG enhance the thermal stability and resistance to deformation of asphalt at high temperatures, with SEUG having a particularly notable effect. However, both additives do not improve the resistance of asphalt to cracking at low temperatures. The manufacturing method for EUG-modified asphalt (EUGMA) involves physical mixing, whereas sulfur-vulcanized eucommia ulmoides gum-modified asphalt (SEUGMA) involves physical mixing together with certain chemical processes. This research establishes a theoretical foundation for the advancement of GP as a novel environmentally friendly and highly effective asphalt modification.

Comparative Evaluation of the Removal of Gutta Percha From the Root Canal Using Various Retreatment File Systems With and Without Magnification: An In Vitro Study.

AIM AND OBJECTIVE: The main goal was to compare the efficacy of gutta percha (GP) removal from the root canal using the Neo Endo Retreatment file system, Solite RS3, and ProTaper Universal Retreatment (PTUR) files with and without magnification under a direct operative microscope using stereomicroscopic evaluation. MATERIALS AND METHODS: Sixty single-rooted teeth were randomly assigned to one of three groups after obturation till F2 mastercone with resin sealer: Group 1 (n=20): Neo Endo Retreatment Files, Group 2 (n=20): Solite RS3, Group 3 (n=20): PTUR files. Each group was further separated into two subgroups: Subgroup 1: without magnification (no direct operative microscope) and Subgroup 2: with magnification under a direct operative microscope at 12× magnification. After retreatment, the roots were grooved buccolingually and split into two halves using a diamond disc with the help of a chisel. The samples were examined under a stereomicroscope. Images were captured in a digital camera and analyzed using image analyzing software Image Pro v10 (Media Cybernetics). RESULTS: The Neo Endo retreatment file system had a significantly greater percentage of remaining obturating material than the Solite RS3 Retreatment and PTUR file systems (p<0.05) in both groups with and without magnification. In the group without magnification, Solite RS3 showed a significant difference compared to ProTaper (p<0.05). In the group with magnification, there was no significant difference between the ProTaper Universal retreatment file system and Solite RS3 (p=0.589). Retreatment performed without magnification had more remnant GP when compared to the retreatment procedure performed under magnification of the direct operative microscope. CONCLUSION: Under stereomicroscopic evaluation, the remnant GP was higher in the Neo Endo File System both with and without magnification than in the Solite Retreatment and PTUR file systems. ProTaper showed moderate significance in removing the obturation than Solite RS3 in the magnification group. The Solite RS3 file system performed as efficiently as the PTUR file system.

Revamping the Perished: The Management of Internal Tooth Resorption.

Root resorption is a challenging endodontic case in terms of the management of both hard and soft tissues in patients. It requires thorough knowledge, the proper choice of material, and regular follow-ups. Several etiological factors are responsible for the susceptibility of the tooth to resorption. The most common are dental caries and trauma. This case report sheds light on the etiopathogenesis of the development of internal root resorption and the clinical management of the resorptive defect. It also focuses on the need for proper diagnostic methodology for treating such complex defects.

Comparative Evaluation of Solite RS3 and HyFlex Remover Retreatment Files in Conserving Remaining Dentin Thickness During Endodontic Retreatment Using Cone Beam Computed Tomography: An In Vitro Analysis.

Introduction Non-surgical retreatment is seen as a conservative choice for dealing with recurrent infections, instead of opting for periapical surgery. The retreatment processes should be promptly and efficiently carried out, utilizing a suitable armamentarium. The objective of this experiment is to evaluate the quantity of root dentin that remains following the removal of gutta-percha (GP) from the root canal employing two distinct retreatment files. Materials and methods Sixty single-rooted teeth were selected for the examination. The process of shaping and cleaning was performed using the step-back approach, with a master apical file size of 40. The smear layer was effectively eliminated by rinsing with a solution of 3% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Paper points were employed to desiccate the canals. The obturation process involved the utilization of the lateral compaction technique with the AH Plus sealer (Dentsply Sirona, NC, USA). The teeth were classified into two groups: Group I (n=30) underwent retreatment using HyFlex Remover (Coletene India, Pvt., Ltd.), whereas Group II (n=30) received therapy with Solite RS3 retreatment files (Solite Dental in Chennai, India). The remaining dentin thickness (RDT) was assessed by cone beam computed tomography at levels 3, 6, and 9 mm from the cemento enamel junction after the removal of GP. The acquired data underwent examination using an independent t-test to determine statistical significance. Results The findings demonstrate that the utilization of Solite RS3 files led to a higher level of dentin thickness remaining at 3 mm, 6 mm, and 9 mm on the mesial side in comparison to HyFlex Remover retreatment files. The observed difference was found to be statistically significant at a significance level of p<0.05 on the mesial side. Nevertheless, there was no notable disparity seen between the two file types at these three levels on the distal side (p>0.05). Conclusion Based on the obtained results of the study, it can be concluded that Solite RS3 files show promise in preserving the RDT. However, further studies encompassing diverse parameters are needed to establish a conclusive and definitive conclusion.

Non-surgical Endodontic Management of Multiple Mishaps: A Case Report.

The description of non-surgical retreatment is to eliminate all previous filling materials and correct any mishaps. An adequate understanding of root and canal morphology is a fundamental requirement for obtaining a favorable outcome in endodontic treatment. The endodontic diagnosis was previously treated through therapy with symptomatic apical periodontitis. Treatment was performed under a dental operative microscope. Gates Glidden (GG) drills size 2 and 3 were used to remove the coronal part of gutta-percha for all canals. A braiding technique with a Hedstrom file size 15 without a solvent was used to remove gutta-percha and separate the file together for the palatal canal whereas the mesiobuccal canal was retreated by ProTaper Retreatment Kit. Proper understanding of root canal morphology and using an endodontic armamentarium could reduce endodontic mishaps. This case report described the successful management of overextended gutta-percha, a separated file, and a missed canal.

Comparative evaluation of the antibacterial activity of curcumin-coated gutta-percha versus nanocurcumin-coated gutta-percha against Escherichia coli: An in vitro study.

Introduction: Due to its biological and antibacterial qualities, many plants, including curcumin, are used as phytomedicines in dentistry. They are primarily used as intracanal medication in endodontics to prevent probable chemical side effects and also to address antimicrobial resistance. Curcumin nanoformulations have improved antibacterial activity and improved dispersion, making them the superior form of curcumin. The purpose of this study was to assess curcumin and nanocurcumin's antibacterial properties. As a gutta-percha coating, they are to be tested against Escherichia coli. Materials and Methods: The study employs the standard strain of E. coli, ATCC 25922. The antibacterial activity of gutta-percha cones against E. coli is assessed after coating them with suspensions of curcumin and nanocurcumin. Scanning electron microscopy is utilized to evaluate the coatings' continuity. Results: The gutta-percha cones that are untreated, coated with curcumin, and coated with nanocurcumin exhibit significantly different levels of antibacterial activity. There is statistically significant variation in their antibacterial activity. Conclusion: (1) Compared to curcumin-coated and untreated gutta-percha cones, those coated with nanocurcumin exhibit a stronger antibacterial activity. (2) Compared to uncoated gutta-percha cones, gutta-percha cones coated with curcumin exhibit more antibacterial action.