Cu/TiO2 adsorbents modified by air plasma for adsorption-oxidation of H2S.

In this study, non-thermal plasma (NTP) was employed to modify the Cu/TiO2 adsorbent to efficiently purify H2S in low-temperature and micro-oxygen environments. The effects of Cu loading amounts and atmospheres of NTP treatment on the adsorption-oxidation performance of the adsorbents were investigated. The NTP modification successfully boosted the H2S removal capacity to varying degrees, and the optimized adsorbent treated by air plasma (Cu/TiO2-Air) attained the best H2S breakthrough capacity of 113.29 mg H2S/gadsorbent, which was almost 5 times higher than that of the adsorbent without NTP modification. Further studies demonstrated that the superior performance of Cu/TiO2-Air was attributed to increased mesoporous volume, more exposure of active sites (CuO) and functional groups (amino groups and hydroxyl groups), enhanced Ti-O-Cu interaction, and the favorable ratio of active oxygen species. Additionally, the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results indicated the main reason for the deactivation was the consumption of the active components (CuO) and the agglomeration of reaction products (CuS and SO42-) occupying the active sites on the surface and the inner pores of the adsorbents.

The role of sulfur cycle in new particle formation: Cycloaddition reaction of SO3 to H2S.

The chemistry of sulfur cycle contributes significantly to the atmospheric nucleation process, which is the first step of new particle formation (NPF). In the present study, cycloaddition reaction mechanism of sulfur trioxide (SO3) to hydrogen sulfide (H2S) which is a typical air pollutant and toxic gas detrimental to the environment were comprehensively investigate through theoretical calculations and Atmospheric Cluster Dynamic Code simulations. Gas-phase stability and nucleation potential of the product thiosulfuric acid (H2S2O3, TSA) were further analyzed to evaluate its atmospheric impact. Without any catalysts, the H2S + SO3 reaction is infeasible with a barrier of 24.2 kcal/mol. Atmospheric nucleation precursors formic acid (FA), sulfuric acid (SA), and water (H2O) could effectively lower the reaction barriers as catalysts, even to a barrierless reaction with the efficiency of cis-SA > trans-FA > trans-SA > H2O. Subsequently, the gas-phase stability of TSA was investigated. A hydrolysis reaction barrier of up to 61.4 kcal/mol alone with an endothermic isomerization reaction barrier of 5.1 kcal/mol under the catalytic effect of SA demonstrates the sufficient stability of TSA. Furthermore, topological and kinetic analysis were conducted to determine the nucleation potential of TSA. Atmospheric clusters formed by TSA and atmospheric nucleation precursors (SA, ammonia NH3, and dimethylamine DMA) were thermodynamically stable. Moreover, the gradually decreasing evaporation coefficients for TSA-base clusters, particularly for TSA-DMA, suggests that TSA may participate in NPF where the concentration of base molecules are relatively higher. The present new reaction mechanism may contributes to a better understanding of atmospheric sulfur cycle and NPF.

Preparation of Time-Sequential Functionalized ZnS-ZnO Film for Modulation of Interfacial Behavior of Metals in Biological Service Environments.

Blood-contact devices are prone to inflammation, endothelial dysfunction, coagulation, and the uncontrolled release of metal ions during implantation and service. Therefore, it is essential to make these multifunctional. Herein, a superhydrophobic DE@ZnS-ZnO@SA film (composed of dabigatran ester, zinc sulfite, zinc oxide, and stearic acid, respectively) is produced. The prepared film has non-adhesion and antibacterial properties, superior mechanical stability, durability, corrosion resistance, and is self-cleaning and blood-repellent. The results of the hemolysis, cytotoxicity, and other anticoagulant experiments revealed that the film had good blood compatibility, no cytotoxicity, and excellent anticoagulant properties. The film displays anticoagulant properties even after being immersed in Phosphate-Buffered Saline (PBS) for 7 days. Furthermore, the film can spontaneously release H2S gas for 90 h after soaking in an acidic environment (pH = 6) for 90 h. This property improves the acidic microenvironment of the lesion and promotes the proliferation of endothelial cells by using H2S gas. In addition, the film can inhibit the uncontrollable release of Zn2+ ions, avoiding its toxicity even when immersed in an acid environment for 35 days. This time-sequential functionalized surface has the potential to typify the future of blood-contacting scaffolds for long-lasting use.

Cystathionine gamma-lyase deficiency exaggerates diethylnitrosamine-induced liver damage in mice.

Cystathionine gamma-lyase (CSE) is a key enzyme in reverse transsulfuration pathway and contributes to the majority of H2S generation in liver tissues via cysteine metabolism. Dysfunction of the CSE/H2S system is linked to both chronic and acute liver damage. This study investigated the regulatory role of CSE deficiency on diethylnitrosamine (DEN)-induced liver damage in mice. A single injection of DEN was administered into 4-week-old male CSE knockout (CSE-KO) mice and wild-type (WT) littermates, and the mice were sacrificed at 28 weeks of age. Compared to age-matched WT mice, CSE-KO mice spontaneously developed steatosis with increased oxidative stress and higher expressions of inflammation and fibrosis-related genes at 28-weeks of age. Following DEN injection, CSE-KO mice experienced more severe liver damage in comparison with the WT group as reflected by elevated levels of lipid accumulation, increased activities of alanine aminotransferase and aspartate aminotransferase, higher oxidative stress and fibrosis development, and increased expressions of inflammation and fibrosis-related genes. No visible tumors were observed in both types of mice with DEN treatment. In addition, the expression levels of the three H2S-generating proteins (CSE, cystathionine beta-synthase, and 3-mercaptopyruvate sulfurtransferase) and the H2S production rate in liver tissues were unaffected by DEN. Taken together, our study demonstrates that CSE provides a significant hepatoprotective effect and deficiency of CSE exaggerates DEN-induced liver damage in mice. Based on these findings, it can be suggested that targeting the CSE/H2S signaling pathway could be a potential therapeutic target for the treatment of liver diseases.

A novel structurally modified isophorone fluorescent probe for H2S detection.

Hydrogen sulfide (H2S) has a comprehensive contribution to the normal operation and stability of organisms and is also present in environmental water samples and food deterioration. Thus, it is exceedingly promising and significant to develop a highly sensitive detection technique for tracing H2S. Inspired by this, we designed and synthesized a new fluorescent probe 2-[3-[2-[3-bromo-4-(2,4- dinitrobenzenesulfonate)] ethenyl]-5,5-dimethyl-2-cyclohexen-1-ylidene]propanedinitrile (SP-Br) for hydrosulfide ion detection by introducing bromine atom. Compared with reported H2S probes based on the same fluorescent parent, SP-Br has longer fluorescence emission (λem = 670 nm), shorter response time (3 min), lower detection limit (149 nM), and wider detection range (0-30 nM). SP-Br can emit weak yellow fluorescence, and the emission intensity at 670 nm is considerably enhanced in the presence of hydrosulfide ions. The identification mechanism of hydrosulfide ion by SP-Br was verified by high-resolution mass spectrometry, fluorescence, and UV-vis absorption spectroscopy. In addition, SP-Br has been successfully applied to the monitoring of actual water samples and beer samples and has certain development prospects and value in the fields of environmental pollution and food quality analysis.

Reactive adsorption and catalytic oxidation of gaseous hydrogen sulfide using a prototype air purifier built with bismuth-doped titanium dioxide.

A prototype air purifier (AP) module has been constructed using bismuth-doped titanium dioxide (Bix-P25: x(%) as Bi/Ti molar ratios of 1.1, 2.1, 3.3, 5.3, and 8.7). The reactive adsorption property of Bix-P25 materials is evaluated against H2S gas at a recirculation rate of 160 L min-1 in a 17 L closed chamber. The AP (Bi5.3-P25) exhibits superior performance against 10 ppm H2S in dry air under dark conditions (i.e., without light irradiation), with a removal efficiency (XH2S)= 99% in 5 mins, reaction kinetic rate (r (at X = 10%))= 7.3 mmol h-1g-1, and partition coefficient= 0.18 mol kg-1 Pa-1. As such, its superiority is evident over the reference AP (P25) filter with XH2S < 10%. The clean air delivery rate (CADR) of AP (Bi5.3-P25) increases noticeably from 9.9 to 17.8 L min-1 with increasing relative humidity (RH) from 0 to 80%, respectively. In contrast, the CADR decreases from 9.9 to 5.8 L min-1 as the H2S increases from 10 to 20 ppm. According to density functional theory (DFT), the presence of H2O vapor enhances the hydroxylation of Bix-P25 surface to promote H2S mineralization through the formation of TiS3 (i.e., thermodynamic reaction of S atom with the catalytic surface). Complete removal of H2S on the Bi5.3-P25 surface is also confirmed consistently through gas chromatography-mass spectrometry (GC-MS), in-situ diffuse reflection infrared spectroscopy (in-situ DRIFTS), and elemental analysis (EA). This work represents the first utilization of Bix-P25 materials fabricated on an AP platform toward the desulfurization of H2S at room temperature (RT). The practical utility of Bix-P25 is overall validated by its eminent role in reactive adsorption and catalytic oxidation (RACO) of H2S from the air.

Tungsten-needle intensifies microwave-sustained plasma accelerating direct H2S conversion to H2.

Direct sustainable conversion of hydrogen sulfide (H2S) enables collaborative recovery of H and S resources via a metal-enhanced microwave plasma strategy, avoiding the hydrogen waste in the traditional Claus process. However, the metal size effect on microwave plasma property, the optimal process parameters, and the enhancement mechanism remain unclear in H2S conversion. Herein, the optimal tungsten needle (diameter: 1 mm, length: 60 mm, and tip angle: 10°) is experimentally proven for intensifying microwave discharge in multi-mode cavities. Theoretical calculations and plasma distribution reveal that the optimized tungsten needle achieves the ideal coupling with the microwave field, exhibiting extreme electric field augmentation around the needle tip. Tungsten-needle intensifies microwave-sustained plasma, realizing 40.2 % (90.1 %) conversion of 100 % (10 %) concentration H2S to H2 at a low microwave power of 300 W with a good stability of 30 hrs. Low power, large flow rate, and high H2S concentration are beneficial for improving energy efficiency. The excitation of microwave plasma is accompanied by a massive generation of highly energetic electrons. The direct high-energy electron-H2S collision contributes a lot to H2S splitting, especially for high-concentration H2S. In-situ optical emission spectroscopy confirms the vital S and H radicals in the plasma. The free radical reactions triggered by electron collisions are responsible for the production of H2 and S. This work opens an avenue to sustainable and low-carbon hydrogen production from the direct conversion and utilization of H2S.

Rhizobia cystathionine γ-lyase-derived H2S delays nodule senescence in soybean.

Hydrogen sulphide (H2S) is required for optimal establishment of soybean (Glycine max)-Sinorhizobium fredii symbiotic interaction, yet its role in regulating the nitrogen fixation-senescence transition remains poorly understood. A S. fredii cystathionine γ-lyase (CSE) mutant deficient in H2S synthesis showed early nodule senescence characterized by reduced nitrogenase activity, structural changes in nodule cells, and accelerated bacteroid death. In parallel, the CSE mutant facilitated the generation of reactive oxygen species (ROS) and elicited antioxidant responses. We observed that H2S-mediated persulfidation of cysteine C31/C80 in ascorbate peroxidase (APX) and C32 in APX2 modulated enzyme activity, thereby participating in hydrogen peroxide (H2O2) detoxification and delaying nodule senescence. Comparative transcriptomic analysis revealed a significant up-regulation of GmMYB128, an MYB transcription factor (TF), in the CSE mutant nodules. Functional analysis through overexpression and RNAi lines of GmMYB128 demonstrated its role as a positive regulator in nodule senescence. MYB128-OE inoculated with the CSE mutant strain exhibited a reduction in nitrogenase activity and a significant increase in DD15 expression, both of which were mitigated by NaHS addition. Changes at the protein level encompassed the activation of plant defenses alongside turnover in carbohydrates and amino acids. Our results suggest that H2S plays an important role in maintaining efficient symbiosis and preventing premature senescence of soybean nodules.

A Versatile pH-Dependent Fluorometric, Colorimetric, and Electrochemical Sensor for H2S Monitoring in Water.

Hydrogen sulfide (H2S) is a colorless, foul smelling, toxic substance that can be found in water bodies and waste waters, especially in occupational susceptible environments, and can lead to harmful effects in humans at higher concentrations. An H2S monitoring probe NNAP is synthesized, which displays pH-dependent electrochemical, colorimetric, and fluorescence responses. NNAP functions as a fluorometric sensor at pH 7.4, with a limit of detection (LOD) of 0.70 mM, and as a colorimetric sensor at pH 12, where visible color changes are discernible to the naked eye, with an LOD of 4.28 mM. Additionally, it demonstrates utility in electrochemical sensing at pH 2, with a LOD of 2.5 mM. Furthermore, NNAP-coated paper strips have been successfully utilized for real-time H2S monitoring applications.

Roles of Hydrogen Sulfide (H2S) as a Potential Therapeutic Agent in Cardiovascular Diseases: A Narrative Review.

Cardiovascular disease (CVD) stands as one of the leading causes of morbidity and mortality worldwide, and the continued search for novel therapeutics is vital for addressing this global health challenge. Over the past decade, hydrogen sulfide (H2S) has garnered significant attention in the field of medical research, as it has been proven to be a cardioprotective gaseous signaling molecule. It joins nitric oxide and carbon monoxide as endogenously produced gasotransmitters. As for its mechanism, H2S functions through the posttranslational addition of a sulfur group to cysteine residues on target proteins in a process called sulfhydration. As a result, the observed physiological effects of H2S can include vasodilation, anti-apoptosis, anti-inflammation, antioxidant effects, and regulation of ion channels. Various studies have observed the cardioprotective benefits of H2S in diseases such as myocardial infarction, ischemia-reperfusion injury, cardiac remodeling, heart failure, arrhythmia, and atherosclerosis. In this review, we discuss the mechanisms and therapeutic potential of H2S in various CVDs.

Response Enhancement in High-Temperature H2S-Treated Metal Oxide Gas Sensors.

Metal oxide gas sensors (MOGS), crucial components in monitoring air quality and detecting hazardous gases, are well known for their poisoning effects when exposed to certain gas molecules, such as hydrogen sulfide. Surprisingly, our research reveals that high-temperature H2S treatment leads to an enhancement effect rather than response decay. This study investigates the time-decaying response enhancement, being attributed to the formation of metal sulfide and metal sulfate on the metal oxide's surface, enhancing the electronic sensitization. Such an enhancement effect is demonstrated for various gases, including CO, CH3CH2OH, CH4, HCHO, and NH3. Additionally, the impacts of H2S treatment on the response and recovery time are also observed. Surface compositional analysis are conducted with X-ray photoelectron spectroscopy. A proposed mechanism for the enhancement effect is elaborated, highlighting the role of electronic sensitization and the sulfide-sulfate component. This research offers valuable insights into the potential applications of metal oxide sensors in sulfide-presented harsh environments in gas sensing, encouraging future exploration of optimized sensor materials, operation temperature, and the development of hydrogen sulfide poisoning-resistant and higher sensitivity MOGS.

Progress on hydrogen sulfide removal: From catalytic oxidation to plasma-assisted treatment.

Air pollution is a long-standing environmental challenge as well an important economic subject. Hydrogen sulfide is one the major pollutants in the industrial releases. This review focuses on the thermochemical treatment of hydrogen sulfide based on the most recent works to date regarding its removal. By analyzing fundamental steps in chemical reaction engineering, some useful factors are emphasized since they are often neglected in scientific studies, catalysts design and process scale-up. From processing side, the fluid flow conditions including velocity, H2S concentration, relative humidity, temperature and pressure strongly influence the kinetic behavior and so the catalytic performance of the H2S removal reactor. From material side, the catalyst properties including nature, porosity, pore types, size, sites distribution and layer structuration largely influence the removal performance via among others the accessibility to catalytic sites, pores connection and mass transfer resistance. Plasma-assisted catalytic removal of H2S combines many novelties in comparison with a classical thermo-catalytic process. From patents review, we can see that main concerns are about electrodes mounting, reactor lifetime and modular design to solve the problems in the industrial practice. We attempt to provide for scientists, engineers and industrialists a guidance on the design of catalysts and processes for H2S removal which could be applied in laboratorial studies and industrial processes as well.

Surface-air exchanges of H2S and SO2 in an urban wetland in eastern China.

Wetlands are widely recognized as hot spots for the emission or deposition of biogenic sulfur gases, including hydrogen sulfur (H2S) and sulfur dioxide (SO2), which significantly affect air quality and climate change. With the expansion of urban wetlands, it is critical to know the roles that urban wetlands played in atmospheric H2S and SO2 budget. In this study, the surface-air exchange fluxes of H2S and SO2 were measured by the Dynamic Flux Chamber (DFC) method in a typical urban wetland in eastern China from Sep 2022 to July 2023. It was found that the urban wetland did not have the expected high H2S emission, might be caused by the relatively high pH value and low sulfate concentration in the soil. Although H2S showed emission in the daytime of spring and summer, an overall H2S flux of -0.04 kg S ha-1 yr-1 was observed throughout the year. Meanwhile, the urban wetland presented a net sink of SO2, with a deposition flux of 0.14 kg S ha-1 yr-1. The negative peaks of SO2 flux corresponded to the suddenly elevated SO2 concentration in the ambient air especially in spring and winter. Through linear fitting of SO2 flux and concentration, the concept of SO2 "compensation point" was proposed. The compensation point is the concentration level at which the observed SO2 flux equals zero. The "compensation point" changed with the season and was related to temperature and humidity. The "compensation point" in summer and autumn were larger, being 2.37 ppb and 1.40 ppb, respectively, while they were 1.07 ppb and 0.86 ppb in spring and winter respectively. Our results suggest that the urban wetland expansion may have little risk of increasing air H2S but could act as a significant sink of SO2 with high SO2 concentration in the urban region.

Risk of hydrogen sulfide pollution from pressure release resulting from landfill mining.

Landfill mining (LFM) has gained widespread recognition due to its benefits in terms of resource utilization of landfill waste and reuse of landfill sites. However, it is important to thoroughly assess the associated environmental risks. This study simulated the pressure release induced from LFM in small-scale batch anaerobic reactors subject to different initial pressures (0.2-0.6 MPa). The potential risk of hydrogen sulfide (H2S) pollution resulting from pressure release caused by LFM was investigated. The results demonstrated that the concentration of H2S significantly increased following the simulated pressure treatments. At the low (25 °C) and high (50 °C) temperatures tested, the peak H2S concentration reached 19366 and 24794 mg·m-3, respectively. Both of these concentrations were observed under highest initial pressure condition (0.6 MPa). However, the duration of H2S release was remarkably longer (>90 days) at the low temperature tested. Microbial diversity analysis results revealed that, at tested low temperature, the sulfate-reducing bacteria (SRB) communities of various pressure-bearing environments became phylogenetically similar following the pressure releases. In contrast, at the high temperature tested, specific SRB genera (Desulfitibacter and Candidatus Desulforudis) showed further enrichment. Moreover, the intensified sulfate reduction activity following pressure release was attributed to the enrichment of specific SRBs, including Desulfovibrio (ASV585 and ASV1417), Desulfofarcimen (ASV343), Candidatus Desulforudis (ASV24), and Desulfohalotomaculum (ASV506 and ASV2530). These results indicate that the pressure release associated with LFM significantly increases the amount of H2S released from landfills, and the SRB communities have different response mechanisms to pressure release at different temperature conditions. This study highlights the importance of considering the potential secondary environmental risks associated with LFM.

Construction of a highly specific fluorescence "turn-on" probe for H2S detection and imaging in drug-induced live cells, zebrafish and mice arthritis models.

Quantitatively and selectively detecting the biomarker of hydrogen sulfide (H2S) in arthritis diseases is of great significance for the early diagnosis and treatment of arthritis. Modern medical studies show that H2S as a biomarker is involved in the development of inflammation. In this work, a new highly specific fluorescence "turn-on" probe JMD-H2S was tailored for H2S detection and imaging in drug-induced live cells, zebrafish and mice arthritis models, which utilized pyrazoline molecule as the fluorescence signal reporter group and 2,4-dinitrophenyl ether group (DNB) with strong intramolecular charge transfer (ICT) effect as the H2S recognition moiety and fluorescence quenching group. JMD-H2S showed a fast response time (<60 s), a large fluorescence response ratio (enhanced ∼20 folds) at I453/I0, excellent sensitivity toward H2S over other analytes, and an outstanding limit of detection (LOD) as low as 25.3 nM. In addition, JMD-H2S has been successfully applied for detecting and imaging H2S in drug-induced live cells, zebrafish, and mice arthritis models with satisfactory results, suggesting it can be used as a robust molecular tool for investigating the occurrence and development of H2S and arthritis.

Cr(VI) induced hepatocyte apoptosis through the CTH/H2S/Drp1 signaling pathway.

Hexavalent chromium [Cr(VI)] is a highly hazardous heavy metal with multiple toxic effects. Occupational studies indicate that its accumulation in humans can lead to liver damage. However, the exact mechanism underlying Cr(VI)-induced hepatotoxicity remains unknown. In this study, we explored the role of CTH/H2S/Drp1 pathway in Cr(VI)-induced oxidative stress, mitochondrial dysfunction, apoptosis, and liver injury. Our data showed that Cr(VI) triggered apoptosis, accompanied by H2S reduction, reactive oxygen species (ROS) accumulation, and mitochondrial dysfunction in both AML12 cells and mouse livers. Moreover, Cr(VI) reduced cystathionine γ-lyase (CTH) and dynamin related protein 1 (Drp1) S-sulfhydration levels, and elevated Drp1 phosphorylation levels at Serine 616, which promoted Drp1 mitochondrial translocation and Drp1-voltage-dependent anion channel 1 (VDAC1) interactions, ultimately leading to mitochondria-dependent apoptosis. Elevated hydrogen sulfide (H2S) levels eliminated Drp1 phosphorylation at Serine 616 by increasing Drp1 S-sulfhydration, thereby preventing Cr(VI)-induced Drp1-VDAC1 interaction and hepatotoxicity. These findings indicated that Cr(VI) induced mitochondrial apoptosis and hepatotoxicity by inhibiting CTH/H2S/Drp1 pathway and that targeting either CTH/H2S pathway or Drp1 S-sulfhydration could serve as a potential therapy for Cr(VI)-induced liver injury.

Hydrogen Sulfide Improves Postharvest Quality of Okra (Abelmoschus esculentus (L.) Moench) Pods by Enhancing Antioxidant Capacity and Delaying Lignification.

Okra (Abelmoschus esculentus (L.) Moench) pod storage is challenging due to its high water content and tendency to lignify. Sodium hydrosulfide (NaHS) served as an H2S donor in this investigation. Compared with the control group, the group treated with 0.5 mmol/L NaHS solution effectively maintained the appearance quality, and its weight loss was only 6.21% at 20 days. The H2S treatment not only preserved tissue nutrients but also significantly enhanced catalase (CAT), ascorbic acid peroxidase (APX), and superoxide dismutase (SOD) activities while decreasing oxidant damage. In addition, H2S slowed down lignin synthesis by inhibiting the activities of key enzymes such as phenylalanine ammonialyase (PAL), cinnamate 4-hydroxylase (C4H), and cinnamyl alcohol dehydrogenase (CAD) in the lignin biosynthesis pathway. Transcriptome analysis revealed that H2S affects 34 genes in the phenylpropanoid biosynthesis pathway, such as AePAL, Ae4CL1, AeCCOAOMT1, AePOD, etc., which inhibit lignin synthesis of okra pods. All in all, moderate H2S can improve postharvest quality and extend the shelf-life of okra pods by enhancing antioxidant capacity and delaying lignification; the results will provide an overview of its application in the preservation of okra pods.

Thioamides in medicinal chemistry and as small molecule therapeutic agents.

Thioamides, which are fascinating isosteres of amides, have garnered significant attention in drug discovery and medicinal chemistry programs, spanning peptides and small molecule compounds. This review provides an overview of the various applications of thioamides in small molecule therapeutic agents targeting a range of human diseases, including cancer, microbial infections (e.g., tuberculosis, bacteria, and fungi), viral infections, neurodegenerative conditions, analgesia, and others. Particular focus is given to design strategies of biologically active thioamide-containing compounds and their biological targets, such as kinases and histone methyltransferase ASH1L. Additionally, the review discusses the impact of the thioamide moiety on key properties, including potency, target interactions, physicochemical characteristics, and pharmacokinetics profiles. We hope that this work will offer valuable insights to inspire the future development of novel bioactive thioamide-containing compounds, facilitating their effective use in combating a wide array of human diseases.

In Situ Synthesis of Hierarchical Co(CO3)0.5(OH)·0.11H2O@ZIF-67/WO3 With High Humidity Immunity and Response to H2S Sensing.

H2S gas sensors with facile preparation, low detection limits, and high selectivity are crucial for environmental and human health monitoring. However, it is difficult to maintain a high response of H2S gas sensors under high humidity in practical applications. To face this dilemma, a layer-by-layer growth method is applied to in situ prepare a nanostructured Co(CO3)0.5(OH)·0.11H2O/WO3 coated by a hydrophobic hierarchical ZIF-67 as the H2S sensor. This novel composite exhibits excellent humidity immunity without sacrificing the excellent sensitivity and selectivity of H2S. At a low operating temperature of 90 °C, a remarkable response value of 1052.3 to 100 ppm H2S has been achieved, which is 779 and 9.36 times higher than that of pure WO3 and Co(CO3)0.5(OH)·0.11H2O/WO3, respectively. More importantly, an 82.2% relative response value remains at a high humidity of 75%RH. The sensing mechanisms are investigated using gas chromatography-mass spectrometry (GC-MS), which revealed that the reaction products are H2O and SO2. The high humidity immunity and fast response of the Co(CO3)0.5(OH)·0.11H2O@ZIF-67/WO3 demonstrate the layer-by-layer in situ synthesis method holds the potential application for the development of high-performance WO3-based H2S sensors.

Electric Field Generated at the Millisecond Pulse-Polarized Interface Facilitates the Electrolytic Conversion of SO2 into H2S.

Interfacial electric field holds significant importance in determining both the polar molecular configuration and surface coverage during electrocatalysis. This study introduces a methodology leveraging the varying electric dipole moment of SO2 under distinct interfacial electric field strengths to enhance the selectivity of the SO2 electroreduction process. This approach presented the first attempt to utilize pulsed voltage application to the Au/PTFE membrane electrode for the control of the molecular configuration and coverage of SO2 on the electrode surface. Remarkably, the modulation of pulse duration resulted in a substantial inhibition of the hydrogen evolution reaction (HER) (FEH2 < 3%) under millisecond pulse conditions (ta = 10 ms, tc = 300 ms, Ea = -0.8 V (vs Hg/Hg2SO4), Ec = -1.8 V (vs Hg/Hg2SO4)), concomitant with a noteworthy enhancement in H2S selectivity (FEH2S > 97%). A comprehensive analysis, incorporating in situ Raman spectroscopy, electrochemical quartz crystal microbalance, COMSOL simulations, and DFT calculations, corroborated the increased selectivity of H2S products was primarily associated with the inherently large dipole moment of the SO2 molecule. The enhancement of the interfacial electric field induced by millisecond pulses was instrumental in amplifying SO2 coverage, activating SO2, facilitating the formation of the pivotal intermediate product *SOH, and effectively reducing the reaction energy barrier in the SO2 reduction process. These findings provide novel insights into the influences of ion and molecular transport dynamics, as well as the temporal intricacies of competitive pathways during the SO2 electroreduction process. Moreover, it underscores the intrinsic correlation between the electric dipole moment and surface-molecule interaction of the catalyst.