RESUMEN
Objectives: The primary aim of this study was to determine quantitatively the extent of coverage of the Hong Kong Laboratory Accreditation Scheme (HOKLAS 015) requirements by guidance checklists (HOKLAS 016-02 and HOKLAS 021). Methods: The level of conformance requirement coverage of HOKLAS 015 by HOKLAS 016-02 and HOKLAS 021 was calculated by an evaluation checklist based on conformance requirements in HOKLAS 015. A distribution analysis of conformance requirements relating to the International Standard ISO 15189:2012 process-based quality management system model was also performed to elicit further coverage information. Results: HOKLAS 016-02 was found to provide coverage of 76% while HOKLAS 021 was found to provide coverage of 11%. HOKLAS 015 was also found to have a distribution coverage of 78% relating to the International Standard ISO 15189:2012 process-based quality management system model. Conclusion: The results of this analysis should be of value to medical laboratories wishing to maintain the internal auditability required by HOKLAS 015 by gaining an awareness of the extent of coverage provided by HOKLAS 016-02 and HOKLAS 021.
RESUMEN
Many aspects of the activity of a medical laboratory have to be documented so as to facilitate the maintenance of the ongoing quality of service. As a consequence, many documents, forms and reports are generated. The retention time for each of these has to be specified. In addition to medical laboratory reports as part of the patient's medical record, the medical laboratory has to retain many documents and specimens according to national legislation or guidance from professional organizations, if these exist. If not, the laboratory management needs to define a retention schedule, which shall define the storage conditions and period of storage, according to ISO 15189:2022 requirements for retention of general quality management documents and records. The EFLM Working Group on Accreditation and ISO/CEN standards provides here a proposal on retention periods of documentation and specimens based on a failure-mode-effects-analysis (FMEA) risk-based approach, a concept of risk reduction that has become an integral part of modern standards.
RESUMEN
Metagenomic sequencing has emerged as a transformative tool in infectious disease diagnosis, offering a comprehensive and unbiased approach to pathogen detection. Leveraging international standards and guidelines is essential for ensuring the quality and reliability of metagenomic sequencing in clinical practice. This review explores the implications of international standards and guidelines for the application of metagenomic sequencing in infectious disease diagnosis. By adhering to established standards, such as those outlined by regulatory bodies and expert consensus, healthcare providers can enhance the accuracy and clinical utility of metagenomic sequencing. The integration of international standards and guidelines into metagenomic sequencing workflows can streamline diagnostic processes, improve pathogen identification, and optimize patient care. Strategies in implementing these standards for infectious disease diagnosis using metagenomic sequencing are discussed, highlighting the importance of standardized approaches in advancing precision infectious disease diagnosis initiatives.
Asunto(s)
Enfermedades Transmisibles , Secuenciación de Nucleótidos de Alto Rendimiento , Humanos , Reproducibilidad de los Resultados , Metagenoma , Estándares de Referencia , Metagenómica , Enfermedades Transmisibles/diagnósticoRESUMEN
OBJECTIVES: Flow cytometry analyses of lymphocyte subpopulations (T, B, NK) are crucial for enhancing clinical algorithms and research workflows. Estimating the total error (TE) values for the percentage and absolute number of lymphocyte subpopulations using the state-of-the-art (SOTA) approach with real data from an external proficiency testing (EPT) scheme was performed. A comparison with previously published Biological Variability (BV)-based specifications was carried out. METHODS: A total of 44,998 results from 86 laboratories over 10 years were analysed and divided into two five-year periods (2012-2016) and (2017-2021). Data come from the IC-1 Lymphocytes scheme of the Spanish External Quality Assurance System (EQAS) GECLID Program. This quantitative scheme includes percentages and absolute numbers of CD3+, CD3+CD4+, CD3+CD8+, CD19+, and CD3-CD56+CD16+ NK cells. The percentage of TE was calculated as: |reported value - robust mean|*100/robust mean for each laboratory and parameter. The cut-off for TE is set at 80â¯% best results of the laboratories. RESULTS: A significant reduction in the SOTA-based TE for all lymphocyte subpopulations in 2017-2021 was observed compared to 2012-2016. The SOTA-based TE fulfils the minimum BV-based TE for percentages of lymphocyte subpopulations. The parameter with the best analytical performance calculated with SOTA (2017-2021 period)-based TE was the percentage of CD3+ (TE=3.65â¯%). CONCLUSIONS: The values of SOTA-based specifications from external quality assurance program data are consistent and can be used to develop technical specifications. The technological improvement, quality commitment, standardization, and training, reduce TE. An update of TE every five years is therefore recommended. TE assessment in lymphocyte subsets is a helpful and reliable tool to improve laboratory performance and data-based decision-making trust.
Asunto(s)
Células Asesinas Naturales , Subgrupos Linfocitarios , Humanos , Citometría de Flujo , Recuento de Linfocitos , Ensayos de Aptitud de LaboratoriosRESUMEN
OBJECTIVES: According to ISO 15189:2022, analytical performance specifications (APS) should relate to intended clinical use and impact on patient care. Therefore, we aimed to develop a web application for laboratory professionals to calculate APS based on a simulation of the impact of measurement uncertainty (MU) on the outcome using the chosen decision limits, agreement thresholds, and data of the population of interest. METHODS: We developed the "APS Calculator" allowing users to upload and select data of concern, specify decision limits and agreement thresholds, and conduct simulations to determine APS for MU. The simulation involved categorizing original measurand concentrations, generating measured (simulated) results by introducing different degrees of MU, and recategorizing measured concentrations based on clinical decision limits and acceptable clinical misclassification rates. The agreements between original and simulated result categories were assessed, and values that met or exceeded user-specified agreement thresholds that set goals for the between-category agreement were considered acceptable. The application generates contour plots of agreement rates and corresponding MU values. We tested the application using National Health and Nutrition Examination Survey data, with decision limits from relevant guidelines. RESULTS: We determined APS for MU of six measurands (blood total hemoglobin, plasma fasting glucose, serum total and high-density lipoprotein cholesterol, triglycerides, and total folate) to demonstrate the potential of the application to generate APS. CONCLUSIONS: The developed data-driven web application offers a flexible tool for laboratory professionals to calculate APS for MU using their chosen decision limits and agreement thresholds, and the data of the population of interest.
Asunto(s)
Técnicas de Laboratorio Clínico , Laboratorios , Humanos , Incertidumbre , Técnicas de Laboratorio Clínico/métodos , Encuestas Nutricionales , AyunoRESUMEN
Introduction: quality medical laboratory service(s) is a key to patient safety with a great emphasis on medical diagnoses and treatment. ISO 15189 laboratory accreditation is an effective way to demonstrate competency. Despite the benefits, there are considerable exigent efforts towards achieving its target, mainly in sub-Saharan Africa. Hence, determining those factors that hinder laboratory quality services and the process of accreditation is important to address and resolve. Thus, this study aimed to assess medical laboratory accreditation process and in selected private and government health facility laboratories in Addis Ababa, Ethiopia. Methods: institutional-based cross-sectional study design was conducted in Addis Ababa from July 1 to August 30, 2018. Data was entered into EPI-data version 3.1 and analyzed by SPSS version 23. Data from focus group discussions were categorized and discussed thematically. Additionally, logistic regression analyses were computed to examine the relationship between the explanatory and response variable. Results: a total of 411 professionals participated in this study, of which 117(28.8%) participants were female, 280 (68.2%) participants with a bachelor´s degree, and 352 (85.6%) participants had information about accreditation. The current laboratory accreditation status in Addis Ababa is 3.6%. The primary identified factors were gaps related to method verification/validation, equipment calibration, and continual program quality improvement. Conclusion: strengthening laboratory management standards towards accreditation (SLMTA) will significantly improve the accreditation process. However, there are internal and external factors may hinder the current accreditation process. Therefore, all responsible agencies/services should give more attention to solving those identified major barriers to achieving accreditation.
Asunto(s)
Instituciones de Salud , Laboratorios , Femenino , Humanos , Masculino , Etiopía , Estudios Transversales , Acreditación , GobiernoRESUMEN
Background: A laboratory professional concerned with the quality of work in medical-biochemical laboratories ensures the accuracy and precision of laboratory analyses through the implementation of international and European guidelines for working with hazardous substances, through the availability and implementation of Standard Operating Procedures (SOPs). Laboratory hazards that affect the concentration and safety of workers arise from laboratory deficiencies such as: lack of preventive measures, knowledge and skills implemented through SOPs and good laboratory practice. Biophysical hazards in medical laboratories are manifested by needles and sharp objects, infectious materials, noise, vibration, radiation, poor air quality, temperature inversions. Objective: Aim of the research was to raise awareness of the quality of work in medical-biochemical laboratories in order to ensure the safety of workers. Methods: A cross-sectional questionnaire-based study was conducted among 100 laboratory proffesionals from Bosnia and Herzegovina and Croatia. The research was conducted over a period of three months. Results: A higher percentage of exposure to infectious agents and needles and sharp objects was found among respondents from BiH compared to CRO (p=0.018 and p=0.001, respectively).We found that respondents employed in accredited laboratories are aware of exposure to hazards in a high percentage related to infectious agents, toxins (p=0.0012 and p=0.0046, respectively). A significant statistical difference was found between respondents with BiH and respondents with CRO in terms of knowledge of accreditation standards of medical-biochemical laboratories (p=0.0155). Respondents who have standard operating procedures available are aware of the hazards of infectious agents (p=0.0001), toxins (p=0.0466), needles and sharp objects (p=0.0052), noise (p=0.0030), vibration (p=0.0007) and extreme temperatures (p=0.0014). Conclusion: Efficient implementation and continuous compliance with the ISO 15189:2018 standard requires constant commitment and active participation of laboratory staff. Laboratories must have standard operating procedures in place and actively monitor their use.
RESUMEN
Significant advances in the technological development of mass spectrometry in the field of proteomics and the generation of extremely large amounts of data require a very critical approach to assure the validity of results. Commonly used procedures involved liquid chromatography followed by high-resolution mass spectrometry measurements. Proteomics analysis is used in many fields including the investigation of the metabolism of biologically active substances in organisms. Thus, there is a need to care about the validity of the obtained results. In this work, we proposed a standardized protocol for proteomic analysis using liquid chromatography-high-resolution mass spectrometry, which covers all of these analytical steps to ensure the validity of the results. For this purpose, we explored the requirements of the ISO/IEC 17025:2017 standard as a reference document for quality control in biochemistry research-based mass spectrometry.
Asunto(s)
Proteómica , Proteómica/métodos , Espectrometría de Masas/métodos , Cromatografía Liquida/métodos , Control de CalidadRESUMEN
Despite a lack of evidence, a bone marrow aspirate differential of 500 cells is commonly used in the clinical setting. We aimed to test the performance of 200-cell counts for daily hematological workup. In total, 660 consecutive samples were analyzed recording differentials at 200 and 500 cells. Additionally, immunophenotype results and preanalytical issues were also evaluated. Clinical and statistical differences between both cutoffs and both methods were checked. An independent control group of 122 patients was included. All comparisons between both cutoffs and both methods for all relevant types of cells did not show statistically significant differences. No significant diagnostic discrepancies were demonstrated in the contingency table analysis. This is a real-life study, and some limitations may be pointed out, such as a different sample sizes according to the type of cell in the immunophenotype analysis, the lack of standardization of some preanalytical events, and the relatively small sample size of the control group. The comparisons of differentials by morphology on 200 and 500 cells, as well as by morphology (both cutoffs) and by immunophenotype, are equivalent from the clinical and statistical point of view. The preanalytical issues play a critical role in the assessment of bone marrow aspirate samples.
RESUMEN
Background: Despite the tremendous progress made in advancing laboratory medicine in low- and middle-income countries (LMICs), inadequate quality management systems (QMSs) remain a problem and barrier to provision of reliable laboratory services in resource-limited settings. Therefore, it is useful to study the experience of medical laboratories in LMICs that have successfully implemented QMS. Aim: This review identified key success factors (KSFs) for medical laboratories in LMICs implementing QMS in accordance with the International Organization for Standardization standard 15189 as a pathway to improving laboratory quality. Methods: Applying Preferred Reporting Items for Systematic Reviews procedures, we conducted a targeted search of studies from LMICs published between 2012 and 2022 to identify KSFs. Thirty-two out of 952 references retrieved were considered relevant and included in this review. Grounded theory was used to extract key features of the included studies to derive KSFs. Results: Ten KSFs for medical laboratories striving to implement QMS were identified and described. These KSFs were integrated to create a model of success for laboratory QMS implementation. The model consists of three underlying factors, namely preparing for change, resource availability, and effective project management, each comprising three separate KSFs. Institutional commitment was identified as the core of the model and is integral to ensuring the quality of laboratory services. Conclusion: Laboratories planning to implement a QMS can benefit from understanding the KSFs demonstrated in this study as this would help them to identify the necessary changes to implement and set realistic expectations about the outcomes of QMS implementation.
RESUMEN
The EU In-Vitro Diagnostic Device Regulation (IVDR) aims for transparent risk-and purpose-based validation of diagnostic devices, traceability of results to uniquely identified devices, and post-market surveillance. The IVDR regulates design, manufacture and putting into use of devices, but not medical services using these devices. In the absence of suitable commercial devices, the laboratory can resort to laboratory-developed tests (LDT) for in-house use. Documentary obligations (IVDR Art 5.5), the performance and safety specifications of ANNEX I, and development and manufacture under an ISO 15189-equivalent quality system apply. LDTs serve specific clinical needs, often for low volume niche applications, or correspond to the translational phase of new tests and treatments, often extremely relevant for patient care. As some commercial tests may disappear with the IVDR roll-out, many will require urgent LDT replacement. The workload will also depend on which modifications to commercial tests turns them into an LDT, and on how national legislators and competent authorities (CA) will handle new competences and responsibilities. We discuss appropriate interpretation of ISO 15189 to cover IVDR requirements. Selected cases illustrate LDT implementation covering medical needs with commensurate management of risk emanating from intended use and/or design of devices. Unintended collateral damage of the IVDR comprises loss of non-profitable niche applications, increases of costs and wasted resources, and migration of innovative research to more cost-efficient environments. Taking into account local specifics, the legislative framework should reduce the burden on and associated opportunity costs for the health care system, by making diligent use of existing frameworks.
Asunto(s)
Servicios de Laboratorio Clínico , Juego de Reactivos para Diagnóstico , Humanos , Juego de Reactivos para Diagnóstico/normas , Unión Europea , Servicios de Laboratorio Clínico/legislación & jurisprudenciaRESUMEN
OBJECTIVES: Since December 2019, the worldwide public health has been threatened by a severe acute respiratory syndrome caused by Coronavirus-2. From the beginning, a turning point has been the identification of new cases of infection, in order to minimize the virus spreading among the population. For this reason, it was necessary introducing a panel of tests able to identify positive cases, which became crucial for all countries. METHODS: As a Regional Reference Centre, the CRQ Laboratory (Regional Laboratory for the Quality Control) developed and conducted an External Quality Assessment (EQA) panel of assay, so as to evaluate the quality of real-time reverse transcription polymerase chain reaction (PCR), which were used by 62 Sicilian laboratories, previously authorized to issue certificates for the COVID-19 diagnosis, on behalf of the Public Health Service. RESULTS: The qualitative performance test was based on pooled samples with different viral loads of SARS-CoV-2 or human Coronavirus OC43. 75% of the participating laboratories tested all core samples correctly, while the remaining 25% interpreted incorrectly the EQA exercise samples matching negatively the standards required. CONCLUSIONS: Subsequent inspection visits confirmed the issue of incorrect positive and negative certifications for COVID-19 by private and public laboratories, despite the possession of the authorization requirements currently provided for by current regulations, with a significant impact on the SSR.
Asunto(s)
COVID-19 , Servicios de Laboratorio Clínico , Humanos , COVID-19/diagnóstico , Prueba de COVID-19 , Laboratorios , Laboratorios Clínicos , SARS-CoV-2RESUMEN
BACKGROUND: Achievement of ISO15189 accreditation demonstrates competency of a laboratory to conduct testing. Three programmes were developed to facilitate achievement of accreditation in low- and middle-income countries: Strengthening Laboratory Management Towards Accreditation (SLMTA), Stepwise Laboratory Improvement Process Towards Accreditation (SLIPTA) and Laboratory Quality Stepwise Implementation (LQSI). OBJECTIVE: To determine the level of accreditation and associated barriers and facilitators among medical laboratories in the WHO-AFRO region by 2020. METHODS: A desk review of SLIPTA and SLMTA databases was conducted to identify ISO15189-accredited medical laboratories between January 2013 and December 2020. Data on access to the LQSI tool were extracted from the WHO database. Facility and country characteristics were collected for analysis as possible enablers of accreditation. The chi-square test was used to analyse differences with level of significance set at <0.05. RESULTS: A total of 668 laboratories achieved accreditation by 2020 representing a 75% increase from the number in 2013. Accredited laboratories were mainly in South Africa (n = 396; 55%) and Kenya (n = 106; 16%), two countries with national accreditation bodies. About 16.9% (n = 113) of the accredited laboratories were registered for the SLIPTA programme and 26.6% (n = 178) for SLMTA. Approximately 58,217 LQSI users were registered by December 2020. Countries with a higher UHC index for access to HIV care and treatment, higher WHO JEE scores for laboratory networks, a larger number of registered LQSI users, with national laboratory policy/strategic plans and PEPFAR-priority countries were more likely to have an accredited laboratory. Of the 475 laboratories engaged in the SLIPTA programme, 154 attained ≥4 SLIPTA stars (ready to apply for accreditation) and 113 achieved ISO 15189 accreditation, with 96 enrolled into the SLMTA programme. Lower-tier laboratories were less likely to achieve accreditation than higher-tier laboratories (7.7% vs. 30%) (p < 0.001). The probability of achieving ISO 15189 accreditation (19%) was highest during the first 24 months after enrolment into the SLIPTA programme. CONCLUSION: To sustainably anchor quality improvement initiatives at facility level, national approaches including access to a national accreditation authority, adoption of national quality standards and regulatory frameworks are required.
Asunto(s)
Acreditación , Laboratorios , Humanos , Control de Calidad , Estándares de Referencia , KeniaRESUMEN
ISO published the draft for final approval of the revision of ISO 15189 standard. Following ISO directives, ISO 15189 must be aligned with ISO/IEC 17025:2017 and should be less prescriptive. Draft ISO/DIS 15189 deviates in some points from ISO 17025 and the ISO indications to limit prescriptiveness: equipment, uncertainty, quality control. This do not seem to be justified by medical specificities and could complicate the understanding of the new requirements in medical laboratories.
ISO a publié le projet pour approbation finale de la révision de la norme ISO 15189. Conformément aux directives de l'ISO, la norme ISO 15189 doit être alignée sur la norme ISO/CEI 17025:2017 et doit être moins prescriptive. Le projet d'ISO/DIS 15189 s'écarte sur certains points de l'ISO 17025 et des indications de l'ISO pour limiter le caractère prescriptif : équipement, incertitude, contrôle de qualité. Cela ne semble pas justifié par les spécificités médicales et pourrait compliquer la compréhension des nouvelles exigences dans les laboratoires médicaux.
Asunto(s)
Laboratorios , Prescripciones , Humanos , Control de Calidad , Unidades Hospitalarias , BiologíaRESUMEN
D-dimer is a multifaceted biomarker of concomitant activation of coagulation and fibrinolysis, which is routinely used for ruling out pulmonary embolism (PE) and/or deep vein thrombosis (DVT) combined with a clinical pretest probability assessment. The intended use of the tests depends largely on the assay used, and local guidance should be applied. D-dimer testing may suffer from diagnostic errors occurring throughout the pre-analytical, analytical, and post-analytical phases of the testing process. This review aims to provide an overview of D-dimer testing and its value in diagnosing PE and discusses the variables that may impact the quality of its laboratory assessment.
RESUMEN
On May 26th 2017 the European Parliament and the Council of The European Union adopted the new regulation on in vitro diagnostic medical devices (IVDR)-Regulation EU 2017/746-planned to be applied from May 26th 2022 in substitution to the previous IVD directives (IVDD 98/79 EC). After several health and legal causes due to medical device malfunctions, the European Union (EU) extensively reviewed the previous regulatory, which had remained unchanged since 1998. Aim of the work is to analyse the effects of the new IVDR on the field of haemostasis and thrombosis testing with particular attention to specific clinical conditions. Clinical laboratories will mainly deal with three different situations: (1) Diagnostic test performed with IVDR products used according with clinical indication certified by manufacturers. (2) Diagnostic test performed with certified IVDR products without clinical validation. (3) Diagnostic test performed with reagents classified as Research Use Only (RUO). At present, only few clinical laboratories through different European countries have been prepared to the new IVDR, while many laboratories are not yet aware about crucial aspects of the new process that deeply involves laboratory medicine. In conclusion, each laboratory should be aware of the IVDR certification of the reagents/instruments used in its laboratory. There are several urgent needs regarding IVDR certification: studies about the clinical performance of haemostasis tests, guidelines for LDTs (definition and documentation), internal and external quality controls for the tests recommended/suggested in the guidance/guidelines and finally implementation and/or update of clinical and laboratory guidelines.