Enhancing the Efficiency of Flexible, Large-Area, ITO-Free Organic Photovoltaic Devices.

The development of flexible ITO-free devices is crucial for the industrial advancement of organic photovoltaic (OPV) technology. Here, a novel ITO-free device architecture is proposed, and ITO-free OPV devices are realized on glass substrates with performance comparable to that of ITO-based devices. It is also demonstrated that the performance of ITO-free devices on polyethylene terephthalate (PET) substrates is limited due to the higher surface roughness of PET, leading to high voltage losses, low device quantum efficiency, and high device leakage current. To address the issue of high roughness on the PET surface, a polyimide (PI) modification strategy is developed and the PI-modified PET is employed as the substrate to construct flexible ITO-free OPV devices and large-area modules with an active area of up to 16.5 cm2. This approach leads to decreased trap-assisted recombination losses, enhanced exciton dissociation efficiency, and a reduced density of pinholes in flexible OPV devices, resulting in improved photovoltaic performance under both strong and weak illumination conditions. The outcomes of this work are expected to advance the industrial development of flexible organic photovoltaic technology.

Rapid Characterization of Phospholipids from Biological Matrix Enabled by Indium Tin Oxide (ITO) Coated Slide Assisted Enrichment MALDI Mass Spectrometry.

Lipidomic analysis of human serum is essential to monitor the individual's health status. Herein, we develop a facile strategy for rapid characterization of phospholipids in human serum via indium tin oxide (ITO) coated glass slide solid phase extraction MALDI mass spectrometry (ITO-SPE-MALDI-MS). Phospholipid species are retained on ITO slide via solid phase extraction owing to the unique property of the ITO material; the measurement of phospholipid species from 1 µl human serum within 2 min is achievable. A comparison of ITO-SPE strategy with conventional extraction methods was further carried out using liquid chromatography-mass spectrometry (LC-MS) and ion-mobility mass spectrometry (IM-MS), resulting in a comparable enrichment performance for the phospholipid analysis. Furthermore, rapid lipidomic profiling of serum samples from human colorectal cancer patients and cell lines was demonstrated. Our results indicate that ITO-SPE-MALDI-MS provides a higher throughput strategy for the analysis of phospholipid species in complex biological mixtures, showcasing its potential for applications in the analysis of clinical biofluids.

An ITO free All Tungsten-Based Electrochromic Energy Storage Device as Smart Window.

Excessive electricity usage in buildings, notably for heating and cooling, accounts for over 30% of energy consumption, creating a pressing need for energy-saving solutions. Electrochromic Smart Windows (ECSW) aims to reduce energy use while maintaining comfort but faces high costs due to materials like tin-doped indium oxide (ITO) and thick electrochromic films. Moreover, achieving full opacity in the colored state of ECSW is a bottleneck for the industry to overcome privacy concerns. Herein, efforts are directed toward finding cost-efficient alternatives, with all-tungsten-based mesh networks showing promise due to enhanced stability. This newly developed ITO-free, all-tungsten ECSW displays minimal transmittance (≈3%) in the colored state using only 260 nm thick sub-stoichiometric tungsten oxide (WO3-x) film within a lithium-ion-based electrolyte. The ECSW device of size (25 cm2) also demonstrates areal capacitance of ≈13 mF cm-2 to power a liquid crystal display (LCD) for ≈25 min, showcasing its energy storage capabilities. Additionally, to confirm scalability and cost-effectiveness, a larger 15 × 15 cm2 ECSW utilized a single hybrid electrode, highlighting the potential for reducing costs when scaling up production processes. This advancement represents a significant stride toward accessible and energy-efficient smart window technology, offering broader applicability within modern architectural practices.

Transcriptomic Analysis Reveals the Heterogeneous Role of Conducting Films Upon Electrical Stimulation.

Central nervous system (CNS) injuries and neurodegenerative diseases have markedly poor prognoses and can result in permanent dysfunction due to the general inability of CNS neurons to regenerate. Differentiation of transplanted stem cells has emerged as a therapeutic avenue to regenerate tissue architecture in damaged areas. Electrical stimulation is a promising approach for directing the differentiation outcomes and pattern of outgrowth of transplanted stem cells, however traditional inorganic bio-electrodes can induce adverse effects such as inflammation. This study demonstrates the implementation of two organic thin films, a polymer/reduced graphene oxide nanocomposite (P(rGO)) and PEDOT:PSS, that have favorable properties for implementation as conductive materials for electrical stimulation, as well as an inorganic indium tin oxide (ITO) conductive film. Transcriptomic analysis reveals that electrical stimulation improves neuronal differentiation of SH-SY5Y cells on all three films, with the greatest effect for P(rGO). Unique material- and electrical stimuli-mediated effects are observed, associated with differentiation, cell-substrate adhesion, and translation. The work demonstrates that P(rGO) and PEDOT:PSS are highly promising organic materials for the development of biocompatible, conductive scaffolds that will enhance electrically-aided stem cell therapeutics for CNS injuries and neurodegenerative diseases.

Optimum Design of InGaN Blue Laser Diodes with Indium-Tin-Oxide and Dielectric Cladding Layers.

The efficiency of current GaN-based blue laser diodes (LDs) is limited by the high resistance of a thick p-AlGaN cladding layer. To reduce the operation voltage of InGaN blue LDs, we investigated optimum LD structures with an indium tin oxide (ITO) partial cladding layer using numerical simulations of LD device characteristics such as laser power, forward voltage, and wall-plug efficiency (WPE). The wall-plug efficiency of the optimized structure with the ITO layer was found to increase by more than 20% relative to the WPE of conventional LD structures. In the optimum design, the thickness of the p-AlGaN layer decreased from 700 to 150 nm, resulting in a significantly reduced operation voltage and, hence, increased WPE. In addition, we have proposed a new type of GaN-based blue LD structure with a dielectric partial cladding layer to further reduce the optical absorption of a lasing mode. The p-cladding layer of the proposed structure consisted of SiO2, ITO, and p-AlGaN layers. In the optimized structure, the total thickness of the ITO and p-AlGaN layers was less than 100 nm, leading to significantly improved slope efficiency and operation voltage. The WPE of the optimized structure was increased relatively by 25% compared to the WPE of conventional GaN-based LD structures with a p-AlGaN cladding layer. The investigated LD structures employing the ITO and SiO2 cladding layers are expected to significantly enhance the WPE of high-power GaN-based blue LDs.

External validation of Ito's nomogram and T.O.HO. scoring system in flexible ureterorenoscopy.

PURPOSE: This study aims to assess stone-free rates after flexible ureterorenoscopy (fURS) using the T.O.HO. (Tallness, Occupied lesion, Hounsfield unit evaluation) scoring system and Ito's nomogram. MATERIALS AND METHODS: In the study conducted with 484 patients, the following parameters were analyzed: age, sex, comorbidities, hospitalization, affected side, extracorporeal shock wave lithotripsy (ESWL) history, stone length, stone density, number of stones, location, and presence of hydronephrosis. RESULTS: Multivariate logistic regression analysis revealed that stone length, stone number, and lower pole stone location were associated with the prediction of stone-free status. The cut-off value for Ito's score was determined to be 13.5 points, with an AUC of 0.792 (sensitivity, 0.609; specificity, 0.821) and a 95% confidence interval of (0.752-0.832) (Fig. 1). The cutoff for the T.O.HO. score was 6.5 points, with an AUC of 0.744 (sensitivity 0.738, specificity 0.602) and a 95% confidence interval of (0.699-0.789). CONCLUSION: In conclusion, T.O.HO. scoring system and the Ito's nomogram are promising tools to predict stone-free status (SFS) after fURS in preoperative evaluation. In addition, the success of scoring systems in predicting SFS preoperatively appears promising and offers a potentially valuable approach.

High-Performance Intrinsically Stretchable Organic Photovoltaics Enabled by Robust Silver Nanowires/S-PH1000 Hybrid Transparent Electrodes.

Intrinsically stretchable organic photovoltaics (is-OPVs) hold significant promise for integration into self-powered wearable electronics. However, their potential is hindered by the lack of sufficient consistency between optoelectronic and mechanical properties. This is primarily due to the limited availability of stretchable transparent electrodes (STEs) that possess both high conductivity and stretchability. Here, a hybrid STE with exceptional conductivity, stretchability, and thermal stability is presented. Specifically, STEs are composed of the modified PH1000 (referred to as S-PH1000) and silver nanowires (AgNWs). The S-PH1000 endows the STE with good stretchability and smoothens the surface, while the AgNWs enhance the charge transport. The resulting hybrid STEs enable is-OPVs to a remarkable power conversion efficiency (PCE) of 16.32%, positioning them among the top-performing is-OPVs. With 10% elastomer, the devices retain 82% of the initial PCE after 500 cycles at 20% strain. Additionally, OPVs equipped with these STEs exhibit superior thermal stability compared to those using indium tin oxide electrodes, maintaining 75% of the initial PCE after annealing at 85 °C for 390 h. The findings underscore the suitability of the designed hybrid electrodes for efficient and stable is-OPVs, offering a promising avenue for the future application of OPVs.

Boergen modification of Harada-ito surgery with and without vertical muscle surgery for acquired unilateral superior oblique muscle palsy.

PURPOSE: The purpose is to report the results of the Boergen modification of the Harada-Ito procedure with and without simultaneous vertical muscle surgery in patients with acquired unilateral superior oblique muscle palsy. PATIENTS AND METHODS: Files of patients with acquired unilateral superior oblique muscle palsy who were treated with Boergen modification of the Harada-Ito procedure were studied retrospectively. For each patient, age at the time of surgery, the presence of diplopia, compensatory head posture, and ocular deviation before and after surgery were retrieved. Results were evaluated 6 months after surgery. RESULTS: A total of 12 patients with a mean age of 32 years at the time of surgery (range 15-45 years) were included. The underlying etiology was head trauma in eleven patients. The modified Harada-Ito procedure alone was done for three cases (Group 1), and a simultaneous combination of this procedure and vertical muscle surgery was performed in nine patients (Group 2). The average intorsional effect in the primary position was 9.2° (8° in Group 1 and 9.6° in Group 2). The average correction of hypertropia in the primary position was 8.2 prism diopters (PD) (1 PD in Group 1 and 10.6 PD in Group 2). Diplopia in the primary position and downgaze were resolved in eleven patients and ten patients, respectively. Four patients had a compensatory head tilt at their last follow-up. CONCLUSIONS: Boergen modification of the Harada-Ito procedure, alone and combined with vertical muscle surgery, successfully corrected primary position diplopia in the majority of the patients.

Flexible Nanoscale Amorphous Oxide Transistors with a Gold-Assisted Transfer Method.

We present a new approach to achieve nanoscale transistors on ultrathin flexible substrates with conventional electron-beam lithography. Full devices are first fabricated on a gold sacrificial layer covering a rigid silicon substrate, and then coated with a polyimide film and released from the rigid substrate. This approach bypasses nanofabrication constraints on flexible substrates: (i) electron-beam surface charging, (ii) alignment inaccuracy due to the wavy substrate, and (iii) restricted thermal budgets. As a proof-of-concept, we demonstrate ∼100 nm long indium tin oxide (ITO) transistors on ∼6 µm thin polyimide. This is achieved with sub-20 nm misalignment or overlap between source (or drain) and gate contacts on flexible substrates for the first time. The estimated transit frequency of our well-aligned devices can be up to 3.3 GHz, which can be further improved by optimizing the device structure and performance.

Regulating Strain and Electronic Structure of Indium Tin Oxide Supported IrOx Electrocatalysts for Highly Efficient Oxygen Evolution Reaction in Acid.

The development of proton exchange membrane water electrolysis is a promising technology for hydrogen production, which has always been restricted by the slow kinetics of the oxygen evolution reaction (OER). Although IrOx is one of the benchmark acidic OER electrocatalysts, there are still challenges in designing highly active and stable Ir-based electrocatalysts for commercial application. Herein, a Ru-doped IrOx electrocatalyst with abundant twin boundaries (TB-Ru0.3Ir0.7Ox@ITO) is reported, employing indium tin oxide with high conductivity as the support material. Combing the TB-Ru0.3Ir0.7Ox nanoparticles with ITO support could expose more active sites and accelerate the electron transfer. The TB-Ru0.3Ir0.7Ox@ITO exhibits a low overpotential of 203 mV to achieve 10 mA cm-2 and a high mass activity of 854.45 A g-1noble metal at 1.53 V vs RHE toward acidic OER, which exceeds most reported Ir-based OER catalysts. Moreover, improved long-term stability could be obtained, maintaining the reaction for over 110 h at 10 mA cm-2 with negligible deactivation. DFT calculations further reveal the activity enhancement mechanism, demonstrating the synergistic effects of Ru doping and strains on the optimization of the d-band center (εd) position and the adsorption free energy of oxygen intermediates. This work provides ideas to realize the trade-off between high catalytic activity and good stability for acidic OER electrocatalysts.