In vivo bioaccumulation and responses of hemocytes of mussels Perna viridis to microplastics and nanoplastics exposure.

Growing micro- and nano-plastic (MNPs) pollution in the environment poses a threat to marine animals. Due to their excellent filtration capacity, bivalves can easily ingest MNPs, which could be translocated to open circulation system with potential risks. In the present study, the accumulation and elimination of MNPs (200 nm and 1 µm) in the mussel hemolymph serum and hemocytes were firstly quantified, and the differential sensitiveresponses of two subpopulations of hemocytes were then explored by in vivo exposure under environmentally relevant concentration of MNPs (200 µg/L). We demonstrated that MNPs were readily translocated into hemolymph serum, but were immediately followed by efficient internalization by hemocytes. Remarkably, concentrations of MNPs in hemolymph were only 0.63 and 0.39 times lower than the ambient exposure concentration. Granulocytes displayed a much higher potential of accumulating MNPs than the agranulocytes. MPs were more readily internalized by granulocytes, with their estimated maximum bioaccumulation factor (BCF) of 0.29 L/g. Due to the primary function of phagocytic encapsulation of MNPs by granulocytes, lysosome features especially the decline of subsequent lysosome membrane potential could be a potential sensitive biomarker in response to MNPs exposure. Our results provided insights on the bioaccumulation of MNPs at the cellular levels in marine bivalves.

Marine Microorganism Molecules as Potential Anti-Inflammatory Therapeutics.

The marine environment represents a formidable source of biodiversity, is still largely unexplored, and has high pharmacological potential. Indeed, several bioactive marine natural products (MNPs), including immunomodulators, have been identified in the past decades. Here, we review how this reservoir of bioactive molecules could be mobilized to develop novel anti-inflammatory compounds specially produced by or derived from marine microorganisms. After a detailed description of the MNPs exerting immunomodulatory potential and their biological target, we will briefly discuss the challenges associated with discovering anti-inflammatory compounds from marine microorganisms.

Perspectives on the Toxic Effects of Micro- and Nanoplastics on the Environment: A Bibliometric Analysis of the 2014 to 2023 Period.

Over the past decade, micro- and nanoplastics (MNPs) have garnered significant attention due to their frequent detection in and potential toxic effects on the environment and organisms, making them a serious threat to human health. To comprehensively understand the research on MNPs' toxicity, we employed the R language-based Bibliometrix toolkit (version 4.3.0), VOSviewer (version 1.6.11) and CiteSpace (version 6.3.R1) to perform statistical and visual analyses of 3541 articles pertaining to MNPs' toxicity between 2014 and 2023, which were retrieved from the Web of Science Core Collection (WOSCC) database. The analysis revealed that research related to MNPs' toxicity has experienced a rapid increase in recent years. China's particularly prominent influence in the field of MNPs' toxicity is evidenced by its academic exchanges and the establishment of a mature cooperation system with other countries (regions), such as the USA and Germany. Studies related to MNPs' toxicity are primarily published in leading journals, including the Science of the Total Environment, Environmental Pollution, and the Journal of Hazardous Materials. The Chinese Academy of Sciences was identified as the leading institution in terms of research on MNPs' toxicity, contributing 203 papers to the total number of studies published. Keyword co-occurrence and burst analyses indicated that the current research on MNPs' toxicity mainly focuses on the toxic effects of MNPs on aquatic organisms, the combined toxicity of MNPs and other contaminants, and the toxic effects and mechanisms of MNPs. Future research should integrate computational toxicology and toxicomics to enhance our understanding of MNPs' toxicity mechanisms and assess the potential health risks posed by atmospheric MNPs.

Polyethylene Micro/Nanoplastics Exposure Induces Epithelial-Mesenchymal Transition in Human Bronchial and Alveolar Epithelial Cells.

Micro/nanoplastics (MNPs), which are widely spread in the environment, have gained attention because of their ability to enter the human body mainly through ingestion, inhalation, and skin contact, thus representing a serious health threat. Several studies have reported the presence of MNPs in lung tissue and the potential role of MNP inhalation in triggering lung fibrosis and tumorigenesis. However, there is a paucity of knowledge regarding the cellular response to MNPs composed of polyethylene (PE), one of the most common plastic pollutants in the biosphere. In this study, we investigated the effects of low/high concentrations of PE MNPs on respiratory epithelial cell viability and migration/invasion abilities, using MTT, scratch, and transwell assays. Morphological and molecular changes were assessed via immunofluorescence, Western blot, and qRT-PCR. We demonstrated that acute exposure to PE MNPs does not induce cellular toxicity. Instead, cells displayed visible morphological changes also involving actin cytoskeleton reorganization. Our data underlined the role of epithelial-mesenchymal transition (EMT) in triggering this process. Moreover, a remarkable increase in migration potential was noticed, in absence of a significant alteration of the cell's invasive capacity. The present study highlights the potential impact of PE MNPs inhalation on the human respiratory epithelium, suggesting a possible role in carcinogenesis.

Performance of metagenomic Next-Generation Sequencing and metagenomic Nanopore Sequencing for the diagnosis of tuberculosis in HIV-positive patients.

Background: Patients who were infected by the Human Immunodeficiency Virus (HIV) could have weakened immunity that is complicated by opportunistic infections, especially for Mycobacterium tuberculosis (MTB). Notably, the HIV-MTB co-infection will accelerate the course of disease progress and greatly increase the mortality of patients. Since the traditional diagnostic methods are time-consuming and have low sensitivity, we aim to investigate the performance of mNGS (metagenomic Next-Generation Sequencing) and mNPS (metagenomic NanoPore Sequencing) for the rapid diagnosis of tuberculosis in HIV-infected patients. Methods: The 122 HIV-infected patients were enrolled for the retrospective analysis. All of the patients underwent traditional microbiological tests, mNGS, and (or) mNPS tests. The clinical comprehensive diagnosis was used as the reference standard to compare the diagnostic performance of culture, mNGS, and mNPS on tuberculosis. We also investigate the diagnostic value of mNGS and mNPS on mixed-infection. Furthermore, the treatment adjustment directed by mNGS and mNPS was analyzed. Results: Compared with the composite reference standard, the culture showed 42.6% clinical sensitivity and 100% specificity, and the OMT(other microbiological testing) had 38.9% sensitivity and 100% specificity. The mNGS had 58.6% clinical sensitivity and 96.8% specificity, and the mNPS had 68.0% clinical sensitivity and 100% specificity. The proportion of mixed-infection cases (88.9%) in the TB group was higher than those in the non-TB group (54.8%) and the mNGS and mNPS are more competitive on mixed-infection diagnosis compared with the traditional methods. Furthermore, there are 63 patients (69.2%) and 36 patients (63.2%) achieved effective treatment after receiving the detection of mNPS and mNGS, respectively. Conclusion: Our study indicated that mNPS and mNGS have high sensitivity and specificity for TB diagnosis compared with the traditional methods, and mNPS seems to have better diagnostic performance than mNGS. Moreover, mNGS and mNPS showed apparent advantages in detecting mixed infection. The mNPS and mNGS-directed medication adjustment have effective treatment outcomes for HIV-infected patients who have lower immunity.

Facile synthesis of novel acidic modified magnetic graphene oxide and its application in the green synthesis of pyrimido[4,5-b]quinolines.

This study aimed to create an innovative acidic nano catalyst capable of producing pyrimido[4,5-b]quinolines under environmentally friendly conditions. To achieve this objective, 1,3-benzenedisulfonyl amide (BDSA) was immobilized onto the surface of magnetic graphene oxide (GO/Fe3O4@PTRMS@BDSA@SO3H), and its surface was acidified using chlorosulfonic acid. The synthesized catalyst's structure was thoroughly examined and verified through various analyses, including FTIR, EDX, elemental mapping, FESEM, XRD, TGA, and DSC. This novel nano catalyst exhibited exceptional activity and selectivity in synthesizing pyrimido[4,5-b]quinoline derivatives under solvent-free conditions, at low temperatures, and with high efficiency. Its catalytic effectiveness stemmed from features such as easy and eco-friendly synthesis methods, abundant accessible catalytic sites, a high surface area, remarkable selectivity, and facile separation from the reaction medium. Additionally, the catalyst proved to be cost-effective, safe, scalable, and reusable for up to four times.

Ultralong K0.5Mn0.75PS3 Nanowires Tailored by K-Ion Scissors for Extraordinary Sodium-Ion Storage.

1D layered nanowires (NWs) are expected to be excellent electrode materials due to their efficient electron/ion transport and strain/stress relaxation. However, it is a great challenge to synthesize layered NWs by a top-down synthetic route. Herein, ultralong 1D layered K0.5Mn0.75PS3 NWs (length: >100 µm; diameter: ≈300 nm) are synthesized for the first time using "K-ion chemical scissors", whose excellent sodium storage performance originates from the bifunctional structural unit, ingeniously combining the alloying energy storage functional unit (P-P dimer) with the quasi-intercalated functional unit ([MnS3]4- framework). Stress-driven K-ion scissors achieve the rapid transformation of MnPS3 bulk to K0.5Mn0.75PS3 NWs with directed tailoring. Compared to MnPS3, the NWs exhibit enlarged interlayer spacing (9.32 Å), enhanced electronic conductivity (8.17 × 10-5 S m-1 vs 4.47 × 10-10 S m-1), and high ionic conductivity (2.14 mS cm-1). As expected, the NWs demonstrate high capacity (709 mAh g-1 at 0.5 A g-1) and excellent cycling performance (≈100% capacity retention after 2500 cycles at 10 A g-1), ranking among metal thiophosphates. A quasi-topological intercalation mechanism of the NWs is revealed through further characterizations. This work expands the top-down synthesis approach and offers innovative insights for the cost-effective and large-scale fabrication of NWs with outstanding electrochemical performance.

Co-crosslinking strategy for dual functionalization of small magnetic nanoparticles with redox probes and biological probes.

Surface functionalization strategy is becoming a crucial bridge from magnetic nanoparticles (MNPs) to their broad bio-application. To realize the multiple functions of MNPs such as magnetic manipulation, target capture, and signal amplification in their use of electrochemical biosensing, co-crosslinking strategy was proposed here to construct dual-functionalized MNPs by combining ultra-sensitive redox moieties and specific biological probes. In this work, MNPs with a TEM size of 10 nm were synthesized by co-precipitation for amination and PEGylation to maintain colloid stability once dispersed in high-ionic-strength buffer (such as phosphate-buffered saline). Then, MNPs@IgG were prepared via the bis(sulfosuccinimidyl) suberate (BS3) cross-linker to conjugate these IgG onto the MNP surface, with a binding efficiency of 73%. To construct dual-functionalized MNPs, these redox probes of ferrocene-NHS (Fc) were co-crosslinked onto the MNP surface, together with IgG, by using BS3. The developed MNPs@Redox@IgG were characterized by SDS‒PAGE to identify IgG binding and by square wave voltammetry (SWV) to validate the redox signal. Additionally, the anti-CD63 antibodies were selected for the development of MNPs@anti-CD63 for use in the bio-testing of exosome sample capture. Therefore, co-crosslinking strategy paved a way to develop dual-functionalized MNPs that can be an aid of their potential utilization in diagnostic assay or electrochemical methods.

Raman spectroscopic investigation of polymer based magnetic multicomponent scaffolds.

Scaffolds acting as an artificial matrix for cell proliferation are one of the bone tissue engineering approaches to the treatment of bone tissue defects. In the presented study, novel multicomponent scaffolds composed of a poly(ε-caprolactone) (PCL), phenolic compounds such as tannic (TA) and gallic acids (GA), and nanocomponents such as silica-coated magnetic iron oxide nanoparticles (MNPs-c) and functionalized multi-walled carbon nanotubes (CNTs) have been produced as candidates for such artificial substitutes. Well-developed interconnected porous structures were observed using scanning electron microscopy (SEM). Raman spectra showed that the highly crystalline nature of PCL was reduced by the addition of nanoadditives. In the case of scaffolds containing MNPs-c and TA, the formation of a Fe-TA complex was concluded because characteristic bands of chelation of the Fe3+ ion by phenolic catechol oxygen appeared. It was found that the necessary conditions for the crystallization of the PCL/MNPs-c/TA are for the catechol groups to be able to penetrate the porous silica shell of MNPs-c, as during experiment with MNPs-c and TA without polymer, no such complexation was observed. Moreover, the number of catechol groups, the spatial structure and molecular size of this phenolic compound are also crucial for complexation process because GA does not form complexes. Therefore, the PCL/CNTs/MNPs-c/TA scaffolds are interesting candidates to consider for their possible medical applications.

Research Progress on Micro(nano)plastic-Induced Programmed Cell Death Associated with Disease Risks.

Due to their robust migration capabilities, slow degradation, and propensity for adsorbing environmental pollutants, micro(nano)plastics (MNPs) are pervasive across diverse ecosystems. They infiltrate various organisms within different food chains through multiple pathways including inhalation and dermal contact, and pose a significant environmental challenge in the 21st century. Research indicates that MNPs pose health threats to a broad range of organisms, including humans. Currently, extensive detection data and studies using experimental animals and in vitro cell culture indicate that MNPs can trigger various forms of programmed cell death (PCD) and can induce various diseases. This review provides a comprehensive and systematic analysis of different MNP-induced PCD processes, including pyroptosis, ferroptosis, autophagy, necroptosis, and apoptosis, based on recent research findings and focuses on elucidating the links between PCD and diseases. Additionally, targeted therapeutic interventions for these diseases are described. This review provides original insights into the opportunities and challenges posed by current research findings. This review evaluates ways to mitigate various diseases resulting from cell death patterns. Moreover, this paper enhances the understanding of the biohazards associated with MNPs by providing a systematic reference for subsequent toxicological research and health risk mitigation efforts.

Physiological and transcriptomic analysis reveals the toxicological mechanisms of polystyrene micro- and nano-plastics in Chlamydomonas reinhardtii.

With the accumulation of plastic waste in the environment, the toxicity of micro- and nano-plastics (MNPs) to microalgae has attracted increasing attention. However, the underlying toxic mechanisms of MNPs remain to be elucidated. In this study, we synthesized micro- and nano-scale of polystyrene MNPs (PS MNPs) to investigate their toxicity and toxic mechanisms in Chlamydomonas reinhardtii. We found that PS MNPs significantly inhibit the production of photosynthetic pigments and increase soluble protein content. The detailed analysis of results shows that both materials affect photosynthetic efficiency by damaging the donor side, reaction center, and electron transfer of photosystem II. Moreover, compared to PS MPs, PS NPs have a greater negative impact on algal cells. Analyzing the transcriptome of cells suggests that the most sensitive metabolic pathways in response to PS MNPs involve oxidative phosphorylation, biosynthesis of secondary metabolites, and photosynthesis. Especially, genes related to photosynthesis and oxidative phosphorylation showed significant changes in expression after exposure to PS MNPs. This study provided molecular-level insights into the toxic mechanisms of PS MNPs on microalgae.

Green-Synthesized Characterization, Antioxidant and Antibacterial Applications of CtAC/MNPs-Ag Nanocomposites.

The emergence of antibiotic resistance, caused by the improper use of antibiotics, is a significant challenge in combating infectious diseases, leading to millions of annual fatalities. The occurrence of antimicrobial side effects catalyzes the investigation of novel antimicrobial compounds and sources of drugs. Consequently, the research on biological activity that is conducted on plants, plant extracts, and compounds that are produced from plant components is of utmost significance. In this study, CtAC/MNPs were obtained by the reaction of activated carbon (AC) obtained from the fruits of the Celtis tournefortii (Ct) plant and magnetic nanoparticles (MNPs), and a CtAC/MNPs-Ag nanocomposite was synthesized by the reduction in silver ions added to the reaction. The synthesized CtAC/MNPs and CtAC/MNPs-Ag nanocomposites were analyzed spectroscopically (FTIR, XRD), microscopically (SEM, EDX), optically (DLS), electrochemically (zeta potential) and magnetically (VSM). The antibacterial activities of CtAC/MNPs and CtAC/MNPs-Ag nanocomposites against S. aureus and E. coli were investigated by microdilution method using minimal inhibitory concentration (MIC) and disk diffusion methods. Antioxidant activity study, including total phenolic content and DPPH and cuprac assays, revealed the remarkable effect of the CtAC/MNPs-Ag nanocomposite. This study has the advantages of obtaining CtAC/MNPs and CtAC/MNPs-Ag nanocomposites in a short time without requiring energy, and most importantly, the reaction takes place without using any toxic substances. In addition, according to the data obtained in the study, the CtAC/MNPs-Ag nanocomposite is thought to shed light on biomedical research.

Assessment of Ingested Micro- and Nanoplastic (MNP)-Mediated Genotoxicity in an In Vitro Model of the Small Intestinal Epithelium (SIE).

Micro- and nanoplastics (MNPs) have become ubiquitous contaminants of water and foods, resulting in high levels of human ingestion exposure. MNPs have been found in human blood and multiple tissues, suggesting that they are readily absorbed by the gastrointestinal tract (GIT) and widely distributed. Growing toxicological evidence suggests that ingested MNPs may pose a serious health threat. The potential genotoxicity of MNPs, however, remains largely unknown. In this study, genotoxicity of primary and environmentally relevant secondary MNPs was assessed in a triculture small intestinal epithelium (SIE) model using the CometChip assay. Aqueous suspensions of 25 and 1000 nm carboxylated polystyrene spheres (PS25C and PS1KC), and incinerated polyethylene (PEI PM0.1) were subjected to simulated GIT digestion to create physiologically relevant exposures (digestas), which were applied to the SIE model at final MNP concentrations of 1, 5, and 20 µg/mL for 24 or 48 h. PS25C and PS1KC induced DNA damage in a time- and concentration-dependent manner. To our knowledge, this is one of the first assessment of MNP genotoxicity in an integrated in vitro ingestion platform including simulated GIT digestion and a triculture SIE model. These findings suggest that ingestion of high concentrations of carboxylated PS MNPs could have serious genotoxic consequences in the SIE.

Green biologically synthesized metal nanoparticles: biological applications, optimizations and future prospects.

In green biological synthesis, metal nanoparticles are produced by plants or microorganisms. Since it is ecologically friendly, economically viable and sustainable, this method is preferable to other traditional ones. For their continuous groundbreaking advancements and myriad physiochemical and biological benefits, nanotechnologies have influenced various aspects of scientific fields. Metal nanoparticles (MNPs) are the field anchor for their outstanding optical, electrical and chemical capabilities that outperform their regular-sized counterparts. This review discusses the most current biosynthesized metal nanoparticles synthesized by various organisms and their biological applications along with the key elements involved in MNP green synthesis. The review is displayed in a manner that will impart assertiveness, help the researchers to open questions, and highlight many points for conducting future research.

Metal nanoparticles are small sized particles with diameters ranging from 1 to 100 nm. These particles have favorable characteristics that made them substitute regular sized particles in various industrial fields. They can be prepared chemically or physically or biologically. Biological preparation of metal nanoparticles which is also known as green synthesis involves the use of different microbes and plant species. It's more beneficial than chemical and physical preparative methods, as it's considered cheap and environmentally sustainable. This review will summarize different forms of green synthesis of metal nanoparticles and their application in biomedical field.

Microscopic Raman-based rapid detection of submicron/nano polypropylene plastics in tea and tea beverages.

Polypropylene (PP) is suitable for a broad range of applications and represents the most extensively utilized plastic in food packaging. Micro- and nano-PP plastics are prevalent categories of microplastics (MPs). However, the majority of MPs particles currently utilized in laboratory studies are man-made polystyrene (PS) spheres, and there has been limited research on micrometer- and nanoscale PP plastic particles. This study aims to employ a top-down approach in crafting micro/nanoparticle (M/NPs) models of PP particles, ensuring their enhanced relevance to real-world environments. Micro/nano PP particles, featuring a negatively charged particle size ranging from 203 to 2101 nm, were synthesized through variations in solution concentration and volume. Simultaneously, the devised MPs model was employed to develop a Raman-based qualitative and quantitative detection method for micro/nano PP particles, considering diverse sizes and concentrations. This method integrates Raman spectroscopy and microscopy to measure PP particles with varying sizes, utilizing the coffee ring effect. The Limit of detection (LOD) for 203 nm PP reached 31.25 µg/mL, while those for 382-2101 nm PP were approximately 3.9 µg/mL. The method underwent quantitative analysis by introducing 203 nm PP nanospheres into real food media (i.e., tea beverages, tea leaves), revealing a minimum LOD of approximately 31.25 µg/mL.

Atomic Force Microscopy beyond Topography: Chemical Sensing of 2D Material Surfaces through Adhesion Measurements.

Developing new functionalities of two-dimensional materials (2Dms) can be achieved by their chemical modification with a broad spectrum of molecules. This functionalization is commonly studied by using spectroscopies such as Raman, IR, or XPS, but the detection limit is a common problem. In addition, these methods lack detailed spatial resolution and cannot provide information about the homogeneity of the coating. Atomic force microscopy (AFM), on the other hand, allows the study of 2Dms on the nanoscale with excellent lateral resolution. AFM has been extensively used for topographic analysis; however, it is also a powerful tool for evaluating other properties far beyond topography such as mechanical ones. Therefore, herein, we show how AFM adhesion mapping of transition metal chalcogenide 2Dms (i.e., MnPS3 and MoS2) permits a close inspection of the surface chemical properties. Moreover, the analysis of adhesion as relative values allows a simple and robust strategy to distinguish between bare and functionalized layers and significantly improves the reproducibility between measurements. Remarkably, it is also confirmed by statistical analysis that adhesion values do not depend on the thickness of the layers, proving that they are related only to the most superficial part of the materials. In addition, we have implemented an unsupervised classification method using k-means clustering, an artificial intelligence-based algorithm, to automatically classify samples based on adhesion values. These results demonstrate the potential of simple adhesion AFM measurements to inspect the chemical nature of 2Dms and may have implications for the broad scientific community working in the field.

Effect of micro- and nanoplastic particles on human macrophages.

Micro- and nanoplastics (MNPs) are ubiquitous in the environment, resulting in the uptake of MNPs by a variety of organisms, including humans, leading to particle-cell interaction. Human macrophages derived from THP-1 cell lines take up Polystyrene (PS), a widespread plastic. The question therefore arises whether primary human macrophages also take up PS micro- and nanobeads (MNBs) and how they react to this stimulation. Major aim of this study is to visualize this uptake and to validate the isolation of macrophages from peripheral blood mononuclear cells (PBMCs) to assess the impact of MNPs on human macrophages. Uptake of macrophages from THP-1 cell lines and PBMCs was examined by transmission electron microscopy (TEM), scanning electron microscopy and live cell imaging. In addition, the reaction of the macrophages was analyzed in terms of metabolic activity, cytotoxicity, production of reactive oxygen species (ROS) and macrophage polarization. This study is the first to visualize PS MNBs in primary human cells using TEM and live cell imaging. Metabolic activity was size- and concentration-dependent, necrosis and ROS were increased. The methods demonstrated in this study outline an approach to assess the influence of MNP exposure on human macrophages and help investigating the consequences of worldwide plastic pollution.

Distinguishing methicillin-resistant Staphylococcus aureus from methicillin-sensitive strains by combining Fe3O4 magnetic nanoparticle-based affinity mass spectrometry with a machine learning strategy.

Pathogenic bacteria, including drug-resistant variants such as methicillin-resistant Staphylococcus aureus (MRSA), can cause severe infections in the human body. Early detection of MRSA is essential for clinical diagnosis and proper treatment, considering the distinct therapeutic strategies for methicillin-sensitive S. aureus (MSSA) and MRSA infections. However, the similarities between MRSA and MSSA properties present a challenge in promptly and accurately distinguishing between them. This work introduces an approach to differentiate MRSA from MSSA utilizing matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) in conjunction with a neural network-based classification model. Four distinct strains of S. aureus were utilized, comprising three MSSA strains and one MRSA strain. The classification accuracy of our model ranges from ~ 92 to ~ 97% for each strain. We used deep SHapley Additive exPlanations to reveal the unique feature peaks for each bacterial strain. Furthermore, Fe3O4 MNPs were used as affinity probes for sample enrichment to eliminate the overnight culture and reduce the time in sample preparation. The limit of detection of the MNP-based affinity approach toward S. aureus combined with our machine learning strategy was as low as ~ 8 × 103 CFU mL-1. The feasibility of using the current approach for the identification of S. aureus in juice samples was also demonstrated.

Remediation of diesel contaminated soil by using activated persulfate with Fe3O4 magnetic nanoparticles: effect and mechanisms.

In this study, Fe3O4 magnetic nanoparticles (Fe3O4 MNPs) were assessed for their ability to enhance the activity of persulfate (PS). Various controlling factors including PS dosages, initial pH, water-soil ratio, ratio of Fe2+, and Fe3O4 MNPs to PS were considered in both the Fe2+/PS system and the Fe3O4 MNPs/PS system. Results showed that the Fe3O4 MNP-activated PS system exhibited high processing efficiency owing to the gradual release of Fe2+. This process occurred in a wide pH range (5-11), attributed to the synergistic action of sulfate radicals (SO4-·) and hydroxyl radicals (OH·) under alkaline conditions, effectively mitigating soil acidification. The ratio of Fe3O4 MNPs to PS and water-soil ratio significantly influenced the degradation rate with the highest petroleum hydrocarbon degradation rate exceeding 80% (82.31%). This rate was 3.1% higher than that achieved by the Fe2+/PS system under specific conditions: PS dosage of 0.05 mol/L, Fe3O4 MNPs to PS ratio of 1:10, water-soil ratio of 2:1, and initial pH of 11. Meanwhile, oxidant consumption in the Fe3O4 MNPs/PS system was halved compared to the Fe2+/PS system due to the slow release of Fe2+ and less ineffective consumption of SO4-·. Mechanistically, the possible degradation process was divided into three parts: the initial chain reaction, the proliferating chain reaction, and the terminating chain reaction. The introduction of Fe3O4 MNPs accelerated the degradation rate of pentadecane, heneicosane, eicosane, tritetracontane, and 9-methylnonadecane.

A review on metal/metal oxide nanoparticles in food processing and packaging.

Consuming hygienic and secure food has become challenging for everyone. The preservation of excess food without negatively affecting its nutritional values, shelf life, freshness, or effectiveness would undoubtedly strengthen the food industry. Nanotechnology is a new and intriguing technology that is currently being implemented in the food industry. Metal-based nanomaterials have considerable potential for use in packaging and food processing. These materials have many advanced physical and chemical characteristics. Since these materials are increasingly being used in food applications, there are certain negative health consequences related to their toxicity when swallowed through food. In this article, we have addressed the introduction and applications of metal/metal oxide nanoparticles (MNPs), food processing and food packaging, applications of MNPs-based materials in food processing and food packaging, health hazards, and future perspectives.