RESUMEN
With the vigorous development and huge demand for portable wearable devices, wearable electronics based on functional fibers continue to emerge in a wide range of energy storage, motion monitoring, disease prevention, electromagnetic interference (EMI) shielding, etc. MXene, as an emerging two-dimensional inorganic compound, has shown great potential in functional fiber manufacturing and has attracted much research attention due to its own good mechanical properties, high electrical conductivity, excellent electrochemical properties and favorable processability. Herein, this paper reviews recent advances of MXene-based fibers. Speaking to MXene dispersions, the properties of MXene dispersions including dispersion stability, rheological properties and liquid crystalline properties are highlighted. The preparation techniques used to produce MXene-based fibers and application progress regarding MXene-based fibers into supercapacitors, sensors, EMI shielding and Joule heaters are summarized. Challenges and prospects surrounding the development of MXene-based fibers are proposed in future. This review aims to provide processing guidelines for MXene-based fiber manufacturing, thereby achieving more possibilities of MXene-based fibers in advanced applications with a view to injecting more vitality into the field of smart wearables.
RESUMEN
Nitrogen dioxide (NO2) is a significant environmental and human health hazard. Current NO2 sensors often lack sensitivity and selectivity under ambient conditions. This study investigates ammonia pyrolysis modification of monolayer Ti3C2Tx MXene to enhance NO2 detection at room temperature. Nitrogen-doped Ti3C2Tx demonstrates a substantial improvement in sensitivity, with a response of 8.87% to 50 ppm of NO2 compared to 0.65% for the original sensor, representing a 13.8-fold increase. The nitrogen-doped sensor also exhibits superior selectivity and linearity for NO2 under ambient conditions. Theoretical analysis shows that nitrogen incorporation promotes enhanced interaction between Ti3C2Tx and its surface oxygen-containing functional groups through electronic hybridization, resulting in improved adsorption energy (1.80 |eV|) and electron transfer efficiency (0.67 |e|) for NO2, thereby enhancing its gas-sensing performance. This study highlights the potential of ammonia pyrolysis-treated Ti3C2Tx MXene for advancing NO2 sensor technologies with heightened performance at room temperature.
RESUMEN
Food contamination has long plagued agriculture, posing significant health risks to consumers. The use of volatile gases for food safety detection has proven highly effective, with composite gas sensors that leverage the two-dimensional material MXene exhibiting notable advancements in detecting various target gases. This paper reviews the progress of MXene-based composite gas sensors in the detection of food safety-related gases. The review begins by examining MXene material synthesis methods and then presents an overview of techniques aimed at enhancing MXene-based sensor detection capabilities. Recently, advancements in MXene composite gas sensors tailored for food safety gases have been highlighted. Finally, challenges encountered in gas-sensing applications of MXene-based composites are outlined, alongside predictions for their future development, aiming to offer insights for the application and advancement of intelligent gas sensors for target gases in food safety.
RESUMEN
Using a chemiluminescence reaction between luminol and H2O2 in basic solution, an ultrasensitive electrochemiluminescence (ECL) aptasensor was developed for the determination of tobramycin (TOB), as an aminoglycoside antibiotic. Ti3C2/Ni/Sm-LDH-based nanocomposite effectively catalyzes the oxidation of luminol and decomposition of H2O2, leading to the formation of different reactive oxygen species (ROSs), thus amplifying the ECL signal intensity of luminol, which can be used for the determination of TOB concentration. To evaluate the performance of the electrochemiluminescence aptasensor and synthesized nanocomposite, different methods such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) analyses were performed. The considerable specific area, large number of active sites, and enhanced electron transfer reaction on this nanocomposite led to the development of an ECL aptasensor with high sensitivity and electrocatalytic activity. After optimizing the preparation method and analysis conditions, the aptasensor revealed a wide linear response ranging from 1.0 pM to 1.0 µM with a detection limit of 18 pM, displaying outstanding accuracy, specificity, and response stability. The developed ECL sensor was found to be applicable to the determination of TOB in human serum samples and is anticipated to possess excellent clinical potentials for detecting other antibiotics, as well.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Técnicas Electroquímicas , Límite de Detección , Mediciones Luminiscentes , Nanocompuestos , Tobramicina , Nanocompuestos/química , Humanos , Técnicas Electroquímicas/métodos , Aptámeros de Nucleótidos/química , Mediciones Luminiscentes/métodos , Técnicas Biosensibles/métodos , Tobramicina/sangre , Tobramicina/análisis , Luminol/química , Antibacterianos/sangre , Antibacterianos/análisis , Peróxido de Hidrógeno/química , Níquel/química , Titanio/químicaRESUMEN
Ultraviolet A (UVA) radiation causes various irreversible damages to human skin, so the research about UVA-specific sensing device is urgent. 2D black phosphorus (BP) is used in many photosensors due to its advantages of high carrier mobility and tunable bandgap, but its application for UVA-specific photosensor is not reported. Here, a MXene-BP/Zinc oxide (ZnO) hybrid structure with lamellar-spherical interfaces like finger lime fruit is prepared by the layer-by-layer assembly (LLA) method, and p-n junctions are constructed between BP and ZnO with the Ti3C2Tx electrode, showing excellent photoelectric performance. Density functional theory (DFT) calculations demonstrate that the enhanced performance is attributed to the rapid separation of photogenerated carriers in the presence of a built-in electric field at interface. Furthermore, a flexible MXene-BP/ZnO based UVA-specific photosensor is prepared, which shows a specific response to UVA as high as 7 mA W-1 and excellent mechanical stability, maintaining 98.46% response after 100 bending cycles. In particular, the integrated anti-UVA skin protection device shows excellent UVA-specific identification and wireless transmission capability, which can provide timely UVA exposure information and skin protection warning for the visually impaired. This work demonstrates a new approach for further developments of advanced photoelectric sensing technology toward improving people's skin health protection.
RESUMEN
Assembling active materials into dense electrodes is a promising way to obtain high-volumetric-capacitance supercapacitors, but insufficient ion channels in the dense structure lead to a low rate capability. Herein, a dense and robust wood electrode with a large MXene volumetric mass loading (1.25 g cm-3) and abundant ion diffusion channels is designed via a facile capillary-force-driven self-densification strategy. Specifically, MXene is assembled onto a wood cell wall, endowing the wood electrode with good electrical conductivity (86 S cm-1) and high electrochemical activity (5.9 F cm-2 at 1 mA cm-2). Notably, the oriented channels along with spaces between adjacent microfibrils recast after densification ensure efficient ion transport for the wood electrode, achieving an excellent rate capability with a high capacitance retention of 77% from 1 to 20 mA cm-2. Meanwhile, the capillary force induces self-densification on the softened wood cell wall, resulting in a highly compact and robust structure for the wood electrode.
RESUMEN
MXenes are two-dimensional (2D) transition metal-based carbides, nitrides, and carbonitrides that are synthesized from its precursor MAX phase. The selective etching of the "A" from the MAX phase yields multi-functional MXenes that hold promise in a wide range of energy-based applications and biomedical applications. Based on its intended application, MXenes are prepared as multilayered sheets, monolayer flakes, and quantum dots. Conventionally, MXenes are prepared using hydrofluoric (HF) acid etching; however, the use of HF impedes its effective use in biomedical applications. This calls for the use of nontoxic HF-free synthesis protocols to prepare MXenes safe for biological use. Therefore, we have discussed a facile process to synthesize biocompatible, HF-free MXene nanosheets and quantum dots.
Asunto(s)
Nanoestructuras , Puntos Cuánticos , Tantalio , Puntos Cuánticos/química , Tantalio/química , Nanoestructuras/química , Ácido Fluorhídrico/químicaRESUMEN
Exploring efficient microwave absorbing materials (MAMs) which could convert electromagnetic (EM) energy into thermal energy represents an approbatory vision to reducing EM radiation and interference. Designing of mixed-dimensional structure with multiple interfaces represents the available target to investigate an ideal MAMs, which maximizes the superiority of mixed-dimensional structure in electromagnetic wave absorption (EMWA). Herein, we take full advantage of multiple interfaces engineering of MXene for optimizing the impedance matching to improve EMWA, MXene-based mixed-dimensional structure was designed by incorporating three-dimensional Fe3C@Carbon layers coated zero-dimensional Fe3O4 nanoparticles (NPs) supported two-dimensional MXene nanosheets (MXene/Fe3O4@Fe3C@Carbon, MFC). The Fe3O4@Fe3C@C with Core@shell structure arrests the essentially self-restacked of MXene and provides various attenuation mechanisms for the incident electromagnetic waves (EMWs). By regulating the carbonization temperature, the MFC exhibits enhanced EMWA property which is attributed to the characteristic structure and optimized dielectric-magnetic synergy effect. The minimum reflection loss (RLmin) value of MFC can reach to -64.3 dB with a matching thickness of 1.73 mm. Otherwise, the maximum effective absorption bandwidth (EAB) (RLmin < -10 dB) reaches 6.42 GHz at only 1.5 mm. Thus, our study refers a novel-fire enlighten to develop excellent mixed-dimensional microwave absorbent based on MXene.
RESUMEN
State-of-the-art triboelectric nanogenerators (TENGs) typically employ fluoropolymers, highly negative chargeable materials in triboelectric series. However, many researchers nowadays are concerned about environmental pollution caused by poly-and per-fluoroalkyl substances (PFAS) due to their critical immunotoxicity as fluoropolymers are likely to release PFAS into the ecosystem during their life cycle. Herein, a sulfur-rich polymer (SRP)/MXene composite, offering high-performance yet sustainable TENG is developed. Value-addition of sulfur into SRP-based TENG has huge advantages since sulfur is abundant waste from petroleum refining and possesses the highest electron affinity (-200 kJ mol-1) among polymerizable atoms. MXene segregated structure is introduced into SRP to achieve homogeneous distribution without electrical percolation by utilizing below 0.5 wt% of MXene, resulting in a significantly enhanced dielectric constant without a drastic increase of dielectric loss. Due to homogeneous MXene distribution, SRP/MXene composite-based TENG demonstrates 2.9 times and 19.5 times enhances peak voltage and peak current compared to previous SRP-based TENGs. Additionally, it exhibits reusability without critical reduction of modulus and TENG performance due to dynamically exchangeable disulfide bonds. Finally, after the corona discharging and scaling-up process to a 4-inch wafer size, SRP/MXene composite-based TENG exhibits an 8.4 times improvement in peak power density, reaching 3.80 W m-2 compared to previous SRP-based TENGs.
RESUMEN
Liquid hydrogen carriers have garnered considerable interest in long-distance and large-scale hydrogen storage owing to their exceptional hydrogen storage density, safety, and compatibility. Nonetheless, their practical application is hampered by the low hydrogen production rate and high cost, stemming from poor thermal utilization and heavy reliance on noble metals in solar bulk dehydrogenation platforms. To conquer these challenges, we devise an economical all-in-one architecture comprising the photothermal catalytic termination-vacant MXene and a highly insulated melamine substrate. This design floats on the air-reactant interface to efficiently drive solar interfacial dehydrogenation. The melamine enables interfacial heat localization to improve the thermal utilization, providing a high reaction temperature. Meanwhile, the MXene with termination vacancies exposes rich active sites for formic acid dehydrogenation, and simultaneously high performance and cost-effectiveness can be realized. This work offers fresh perspectives on the design and application of photothermal catalytic MXene, broadening the prospects for hydrogen storage using liquid hydrogen carriers.
RESUMEN
Contemporary global industrialization, coupled with the relentless growth of the population, has led to a persistent escalation in the emission and accumulation of various toxic and harmful chemicals in the environment, severely disrupting the ecological balance. The development of efficient environmental cleanup materials is a crucial scientific and technological concern. Since the groundbreaking work on Ti3C2Tx in 2011, there has been a huge growing interest in MXene-based composites developed through heterointerface engineering due to its high surface area, hydrophilicity, eco-friendliness, biocompatibility, easy functionalization, excellent thermal/mechanical properties, metal conductivity and rich electronic density. In the area of environmental remediation, MXene-based composites obtained through heterointerface engineering strategies have the ability to effectively remove and systematically monitor contaminants in comparison to virgin MXene, thanks to the synergistic effects and complementary benefits. Heterointerface engineering strategy increases specific surface area, introduces catalytic sites, constructs heterojunctions/Schottky junctions, and facilitates carrier migration and electron-hole separation. These novel MXene-based composites represent significant advances in MXene research and deserve a comprehensive review. Although several excellent reviews and perspectives on the application of MXene-based composites in environmental remediation have been published, there is still a scarcity of comprehensive and systematic assessments on the reliable data and mechanisms of various MXene-based composite materials for pollutant removal and monitoring. In this focused review, the first part briefly introduces the common preparation strategies and characterization methods of single MXene and MXene-based composites, and the second part details the innovative application of MXene-based composites (involving the amalgamation of MXene with metal oxides, metal sulfide, g-C3N4, layered double hydroxides, metal-organic frameworks, single atom/quantum dots, polymers, etc.) in the field of environmental remediation, including carbon dioxide reduction, nitrogen monoxide and volatile organic compounds removal, antibiotic and heavy metal ions degradation, summarizing the relevant performance and mechanisms. Furthermore, the recent advancements in the utilization of MXene-based composites for the sensing of emerging environmental contaminants (antibiotic and antibiotic resistance genes) are summarized. Finally, an outline of the existing challenges and future prospects on this exciting field was narrated for plausible real-world use. This review will help to inspire the diverse design of MXene-based composites and to advance research related to their application in the environmental sector.
RESUMEN
Two-dimensional transition metal carbides/nitrides (MXenes) have shown great promise in various applications. However, mass production of MXenes suffers from the excessive use of toxic fluorine-containing reagents. Herein, a new method was validated for synthesizing MXenes from five MAX ceramics. The method features a minimized (stoichiometric) dosage of F-containing reagent (NaBF4) and polyols (glycerol, erythritol, and xylitol) as the reaction solvent. Due to the sweetness of polyols and the low environmental impact, we refer to this method as a "sweet" synthesis of MXenes. An in-depth molecular dynamics simulation study, combined with experimental kinetic parameters, further revealed that the diffusion of F- in the confined interplanar space is rate-determining for the etching reaction. The expansion of interlayer spacing by polyols effectively reduces the diffusion activation energy of F- and accelerates the etching reaction.
RESUMEN
MXenes have garnered significant attention due to their atomically thin two-dimensional structure with metallic electronic properties. However, it has not yet been fully achieved to discover semiconducting MXenes to implement them into gate-tunable electronics such as field-effect transistors and phototransistors. Here, a semiconducting Ti4N3Tx MXene synthesized by using a modified oxygen-assisted molten salt etching method under ambient conditions, is reported. The oxygen-rich synthesis environment significantly enhances the etching reaction rate and selectivity of Al from a Ti4AlN3 MAX phase, resulting in well-delaminated and highly crystalline Ti4N3Tx MXene with minimal defects and high content of F and O, which led to its improved hydrophobicity and thermal stability. Notably, the synthesized Ti4N3Tx MXene exhibited p-type semiconducting characteristics, including gate-tunable electrical conductivity, with a current on-off ratio of 5 × 103 and a hole mobility of â¼0.008 cm2 V-1 s-1 at 243 K. The semiconducting property crucial for thin-film transistor applications is evidently associated with the surface terminations and the partial substitution of oxygen in the nitrogen lattice, as corroborated by density functional theory (DFT) calculations. Furthermore, the synthesized Ti4N3Tx exhibits strong light absorption characteristics and photocurrent generation. These findings highlight the delaminated Ti4N3Tx as an emerging two-dimensional semiconducting material for potential electronic and optoelectronic applications.
RESUMEN
Osmotic energy from the ocean has been thoroughly studied, but that from saline-alkali lakes is constrained by the ion-exchange membranes due to the trade-off between permeability and selectivity, stemming from the unfavorable structure of nanoconfined channels, pH tolerance, and chemical stability of the membranes. Inspired by the rapid water transport in xylem conduit structures, we propose a horizontal transport MXene (H-MXene) with ionic sequential transport nanochannels, designed to endure extreme saline-alkali conditions while enhancing ion selectivity and permeability. The H-MXene demonstrates superior ion conductivity of 20.67 S m-1 in 1 M NaCl solution and a diffusion current density of 308 A m-2 at a 10-fold salinity gradient of NaCl solution, significantly outperforming the conventional vertical transport MXene (V-MXene). Both experimental and simulation studies have confirmed that H-MXene represents a novel approach to circumventing the permeability-selectivity trade-off. Moreover, it exhibits efficient ion transport capabilities, addressing the gap in saline-alkali osmotic power generation.
RESUMEN
Early non-invasive diagnosis of coronary heart disease (CHD) is critical. However, it is challenging to achieve accurate CHD diagnosis via detecting breath. In this work, heterostructured complexes of black phosphorus (BP) and two-dimensional carbide and nitride (MXene) with high gas sensitivity and photo responsiveness were formulated using a self-assembly strategy. A light-activated virtual sensor array (LAVSA) based on BP/Ti3C2Tx was prepared under photomodulation and further assembled into an instant gas sensing platform (IGSP). In addition, a machine learning (ML) algorithm was introduced to help the IGSP detect and recognize the signals of breath samples to diagnose CHD. Due to the synergistic effect of BP and Ti3C2Tx as well as photo excitation, the synthesized heterostructured complexes exhibited higher performance than pristine Ti3C2Tx, with a response value 26% higher than that of pristine Ti3C2Tx. In addition, with the help of a pattern recognition algorithm, LAVSA successfully detected and identified 15 odor molecules affiliated with alcohols, ketones, aldehydes, esters, and acids. Meanwhile, with the assistance of ML, the IGSP achieved 69.2% accuracy in detecting the breath odor of 45 volunteers from healthy people and CHD patients. In conclusion, an immediate, low-cost, and accurate prototype was designed and fabricated for the noninvasive diagnosis of CHD, which provided a generalized solution for diagnosing other diseases and other more complex application scenarios.
RESUMEN
Ideal bandgap (1.3-1.4 eV) Sn-Pb mixed perovskite solar cells (PSC) hold the maximum theoretical efficiency given by the Shockley-Queisser limit. However, achieving high efficiency and stable Sn-Pb mixed PSCs remains challenging. Here, piperazine-1,4-diium tetrafluoroborate (PDT) is introduced as spacer for bottom interface modification of ideal bandgap Sn-Pb mixed perovskite. This spacer enhances the quality of the upper perovskite layer and forms better energy band alignment, leading to enhanced charge extraction at the hole transport layer (HTL)/perovskite interface. Then, 2D Ti3C2Tx MXene is incorporated for surface treatment of perovskite, resulting in reduced surface trap density and enhanced interfacial electron transfer. The combinations of double-sided treatment afford the ideal bandgap PSC with a high efficiency of 20.45% along with improved environment stability. This work provides a feasible guideline to prepare high-performance and stable ideal-bandgap PSCs.
RESUMEN
Strategically engineering electrocatalysts with optimized interfacial electronic architectures and accelerated reaction dynamics is pivotal for augmenting hydrogen generation via alkaline water electrolysis on an industrial scale. Herein, a novel triple-interface heterostructure Ni3Se4-NiSe2-Co3O4 nanoarrays are designed anchored on Ti3C2Tx MXene (Ni3Se4-NiSe2-Co3O4/MXene) with significant work function difference (ΔΦ) as bifunctional electrocatalysts for water electrolysis. Theoretical calculations combined with experiments uncover the pivotal role of the interface-induced electric field in steering charge redistribution, which in turn modulates the adsorption and desorption kinetics of reaction intermediates. Furthermore, the synergistic interaction between Ni3Se4-NiSe2-Co3O4 and Ti3C2Tx MXene nanosheets endows the hybrids with a large electrochemical surface area, abundantly active sites, and high conductivity. Thus, Ni3Se4-NiSe2-Co3O4/MXene manifests exceptional catalytic prowess for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In addition, the Ni3Se4-NiSe2-Co3O4/MXene electrocatalyst in the water electrolyzer delivers excellent performance and maintains commendable stability beyond 100 h of electrocatalytic operation.
RESUMEN
MXenes belong to one of the recently developed advanced materials with tremendous potential for diverse sensing applications. To date, various types of MXene-based materials have been developed to generate direct/indirect ultrasensitive sensing signals against various forms of analytes via fluorescence quenching or enhancement. In this work, the fluorescence sensing/biosensing capabilities of the MXene-based materials have been explored and evaluated against a list of ionic/emerging pollutants in environment and food matrices. The suitability of an MXene-based sensing approach is also validated through the assessment of the performance based on the basic quality assurance parameters, e.g., limit of detection (LOD), sensing range, and response time. Accordingly, the best performing MXene-based materials are selected and recommended for the given target(s) to help facilitate their scalable applications under real-world conditions.
RESUMEN
Tumor-derived extracellular vesicles detection has emerged as an important clinical liquid biopsy approach for cancer diagnosis. In this work, we developed a novel hybrid plasmonic nanocavity consisting of hexagonal Au nanoplates nanoarray, SnS2/Au nanosheet layer and biomimetic lipid bilayer. Firstly, the hybrid plasmonic nanocavity combined the optical confinement for the ECL regulation and the biological recognition for the detection of extracellular vesicles. Secondly, MXene-derived Ti2N QDs have been prepared as ECL nanoprobe to label extracellular vesicles. Moreover, biomimetic lipid bilayer with specific aptamer was used to identify extracellular vesicles and integrate Ti2N QDs into the nanocavity with membrane fusion strategy. Due to the significant electromagnetic field enhancement at the cavity region, the hybrid plasmonic nanocavity provided strong field confinement to concentrate and redistribute the ECL emission of QDs with a 9.3-fold enhancement. The hybrid plasmonic nanocavity-based ECL sensing system improved the spatial controllability of EVs analysis and the accurate resolution of specific protein. It achieved the sensitive detection of extracellular vesicles in ascites and successfully distinguished the peritoneal metastasis of gastric cancer.
RESUMEN
Directly capturing atmospheric CO2 and converting it into valuable fuel through photothermal synergy is an effective way to mitigate the greenhouse effect. This study developed a gas-solid interface photothermal catalytic system for atmospheric CO2 reduction, utilizing the innovative photothermal catalyst (Cu porphyrin) CuTCPP/MXene/TiO2. The catalyst demonstrated a photothermal catalytic performance of 124 µmol·g-1·h-1 for CO and 106 µmol·g-1·h-1 for CH4, significantly outperforming individual components. Density functional theory (DFT) results indicate that the enhanced catalytic performance is attributed to the internal electric field between the components, which significantly enhances carrier utilization. The introduction of CuTCPP reduces free energy of the photothermal catalytic reaction. Additionally, the local surface plasmon resonance (LSPR) effect and high-speed electron transfer properties of MXene further boost the catalytic reaction rate. This well-designed catalyst and catalytic system offer a simple method for capturing atmospheric CO2 and converting it in-situ through photothermal catalysis.