Unveiling the mechanism secret of abrasion emissions of particulate matter and microplastics.

Recent research highlights that non-exhaust emissions from the abrasion of tires and other organic materials have emerged as a substantial source of airborne particulate matter and marine microplastics. Despite their growing impact, the underlying mechanisms driving these abrasion emissions have remained largely unexplored. In this study, we uncover that abrasion emissions from organic materials are fundamentally governed by a fatigue fracture process, wherein particles are progressively detached from the material surface under cyclic abrasion loads. Our findings demonstrate that these emissions increase significantly only when the applied abrasion loads surpass the material's toughness threshold. We establish a scaling relationship between the concentration of emitted particulate matter and the measurable crack propagation rate of the organic material, offering a robust quantitative method to estimate abrasion emissions. This work not only introduces a novel mechanistic framework for understanding particulate matter pollution from organic material abrasion but also provides a scientific basis for developing strategies to mitigate emissions of airborne particulates and marine microplastics.

Oceanic realistic application of a microplastic biofouling model to the river discharge case.

Marine biofouling is considered one of the major biophysical processes influencing the vertical dynamics of plastic debris in seawater. We numerically implement, for the first time, this mechanism within a fine-resolution, regional model of the Tyrrhenian Sea, in order to simulate the dispersion of microplastics (MPs) released at the mouth of a highly polluting river. Four polymers and three particle sizes are used to quantify algal concentration influence on the trajectories, fates, and accumulation spots of the tracked MPs, by comparing 2002 winter and summer runs encompassing or not biofouling. Besides a marked seasonality for most of the MP types and radii tested, biofouling effects are prominently observed for only 2 polymers and particles bigger than 1µm. Thus, further realistic applications of the biofouling mechanism in oceanic circulation models are required to achieve a thorough assessment of its impact on plastic density within distinctive basins of the world seas.

Effects of microplastics on reproductive characteristics and mechanisms of the marine rotifer Brachionus plicatilis.

Microplastic pollution, especially secondary microplastics (MPs), poses a significant threat to marine ecosystems. Despite its prevalence, the impact of natural-aged MPs on marine organisms, hindered by collection challenges, remains poorly understood. This study focused on 1-3 µm natural-aged MPs collected from Japan's coastal sea, investigating their effects on the rotifer Brachionus plicatilis sensu stricto and its reproductive mechanisms. Rotifers exposed to varying MP concentrations (0, 20, and 200 particles/mL) over 14-day batch cultures exhibited reduced population growth and fertilization rates. Down-regulation of reproductive genes and up-regulation of oxidative stress-related genes were observed, indicating MP-induced disruptions. Enhanced activities of superoxide dismutase and acetylcholinesterase and elevated malondialdehyde levels further emphasized oxidative stress. These findings underscore the detrimental impact of MPs on rotifer reproductivity, shedding light on the underlying mechanisms.

Risk assessment of natural and synthetic fibers in aquatic environment: A critical review.

Marine microplastics, categorized as primary and secondary, including synthetic microfibers like polyethylene terephthalate (PET), polypropylene (PP) and acrylic (PC), represent a potential environmental concern. The complex classification of these fibers, originating from diverse sources such as textiles and many others commercial goods, prompts a need for understanding their impact on aquatic organisms. This study assesses the ecological risks associated with both natural and synthetic fibers in aquatic ecosystems, focusing on toxicity data and their effects on taxonomic groups like Mollusca, Arthropoda, Echinodermata, Cnidaria, and Chordata. To carry out species sensitivity distribution (SSD) curves, a comprehensive analysis of scientific literature was conducted, collecting toxicity data related to various fibers. The resulting SSDs provide insights into the relative sensitivity of different taxonomic groups. The potential ecological risks were evaluated by comparing measured concentrations in diverse aquatic environments with Predicted No-Effect Concentration (PNEC) values. The calculation of Risk Quotient (RQ) allowed to indicate areas where fibers abundance poses a potential threat to aquatic organisms. The study reveals that nylon fibers can pose the highest toxicity risk, especially in Atlantic and Pacific Ocean, Arabian Gulf and VietNam river. Mollusca emerged as particularly sensitive to different fiber types, likely due to their body structure facilitating the accumulation of microfibers. The research emphasizes the urgent need for further studies to get data to human health risk analysis and to address comprehensive environmental management strategies to address the global issue of microfiber pollution.

The comparative study by Raman spectroscopy of the plastic tide in the three ports of the Mediterranean Sea.

This paper summarizes the field studies on marine microplastics (MPs) carried out in the autumn season in four various localisations within three ports chosen at the Mediterranean Sea near the French Riviera and the West Coast of Italy (within the Ligurian Sea). It considers the transport problem and the fate of the MPs introduced to the sea by analysing beach debris found on the shore after the stormy weather. Monitored ports included Saint-Tropez, Portoferraio and Porto Ercole, in which two different places were monitored. The aim is to approach the plastic tide phenomena by concentrating on a selected fraction of all MPs presented on the seashore. The final identification of debris was performed using Raman spectroscopy, providing a high-resolution signal. The PE, PP and PS contents were compared as the most frequent and representative polymers. Finally, we tackle the pending issue of the compound leakage from the MPs taking the environmentally aged particles from Portoferraio for further laboratory experiments and discuss an innovative approach with a low detection limit based on the electrochemical methods.

Dynamic signatures of microplastic distribution across the water column of Yangtze River Estuary: Complicated implication of tidal effects.

Riverine microplastic (MP) discharge into the ocean contributes greatly to global MP contamination, yet our understanding of this process remains primitive. To deepen our interpretation of the dynamic MP variation throughout the estuarine water columns, we sampled at Xuliujing, the saltwater intrusion node of the Yangtze River Estuary, over the course of ebb and flood tides in four seasons (July and October 2017, January and May 2018 respectively). We observed that the collision of downstream and upstream currents contributed to the high MP concentration and that the mean MP abundance fluctuated with the tide. A model of microplastics residual net flux (MPRF-MODEL), taking the seasonal abundance and vertical distribution of MP along with current velocity into consideration, was developed to predict the net flux of MP throughout the full water columns. 2154 ± 359.7 t/year of MP was estimated to flow into the East China Sea via the River in 2017-2018. Our study suggests that riverine MP flux can be overestimated due to reciprocating current carried MP from the estuary. Using the tidal and seasonal variation in MP distribution, we calculated the tide impact factor index (TIFI) for the Yangtze River Estuary to be between 38.11% and 58.05%. In summary, this study provides a baseline of MP flux research in the Yangtze River for similar tidal-controlled rivers and a contextual understanding of how to appropriately sample and accurately estimate in a dynamic estuary system. The redistribution of microplastics may be impacted by complex tide processes. Although not observed in this study, it may merit investigation.

Abundance and distribution of microplastics in surface waters of the Kattegat/ Skagerrak (Denmark).

Microplastics (MPs) are ubiquitous pollutants in the ocean, and there is a general concern about their persistence and potential effects on marine ecosystems. We still know little about the smaller size-fraction of marine MPs (MPs <300 µm), which are not collected with standard nets for MPs monitoring (e.g., Manta net). This study aims to determine the concentration, composition, and size distribution of MPs down to 10 µm in the Kattegat/Skagerrak area. Surface water samples were collected at fourteen stations using a plastic-free pump-filter device (UFO sampler) in October 2020. The samples were treated with an enzymatic-oxidative method and analyzed using FPA-µFTIR imaging. MPs concentrations ranged between 11 and 87 MP m-3, with 88% of the MPs being smaller than 300 µm. The most abundant shape of MPs were fragments (56%), and polyester, polypropylene, and polyethylene were the dominant synthetic polymer types. The concentration of MPs shows a significant positive correlation to the seawater density. Furthermore, there was a tendency towards higher MPs concentrations in the Northern and the Southern parts of the study area. The concentration of MPs collected with the UFO sampler was several orders of magnitude higher than those commonly found in samples collected with the Manta net due to the dominance of MP smaller size fractions. Despite the multiple potential sources of MPs in the study area, the level of MPs pollution in the surface waters was low compared (<100 MP m-3) to other regions. The concentrations of MPs found in the studied surface waters were six orders of magnitude lower than those causing negative effects on pelagic organisms based on laboratory exposure studies, thus is not expected to cause any impact on the pelagic food web.

Global occurrence, drivers, and environmental risks of microplastics in marine environments.

With an increasing quantity of plastic waste being discharged into the oceans, marine microplastic (MP) pollution has received widespread attention. However, the global occurrence characteristics, environmental risks, driving factors, and source-sink relationships remain unclear. In this study, we conducted a meta-analysis based on 165 articles about marine MP pollution. It was found that the global marine MP abundance displayed a significant spatial heterogeneity, and the distribution pattern was influenced by offshore distance, population density, and economic development. The morphological characteristics of MPs showed a significant difference between seawater and marine sediment, and small-size MPs (<1 mm) accounted for the majority of all MPs in the marine environment. The environmental risk assessment revealed that most of the marine MP pollution still remains at low concentrations in the global context, with the Polyurethane (PU), Polyacrylonitrile (PAN), and Polyvinyl chloride (PVC) types of MPs showing high environmental-risk contributions. In addition, land-based waste and marine operations, which were considered to be the dominant sources of marine MPs, primarily aggregated at nearshore submarine areas, in the water column, and in the deep-sea bottom environment. This study suggested that the combination of a meta-analysis and Monte Carlo simulation can provide much valuable information regarding the global occurrence characteristics and environmental risks of marine MPs.

Contamination and distribution of buried microplastics in Sarakkuwa beach ensuing the MV X-Press Pearl maritime disaster in Sri Lankan sea.

Abundance of buried microplastics in sand profiles and pellet pollution index at Sarakkuwa beach, at west-coast of Sri Lanka was studied as a case study due to the receival of plastic nurdles and debris from the MV X-Press Pearl ship disaster in May 2021. Sand collected at 7 locations to a depth of 2 m in different depths for a beach segment of 200 × 25 m2 during October 2021 and sand samples obtained from beach surface during March 2020 from the same location were analyzed for microplastics. Beach was contaminated with 2-5 mm sized partially pyrolyzed LDPE fragments and nurdles demonstrating a peak abundance of 13.3702 g/kg and1 mm-500 µm sized LDPE fragments up to 2.0 m depth. High concentrations of Mo and Cr were observed in the sand collected in 2021. Sarakkuwa beach is critically polluted by nurdles, partially pyrolyzed microplastics, and toxic elements from ship disaster.

Integrated toxicokinetic/toxicodynamic assessment modeling reveals at-risk scleractinian corals under extensive microplastics impacts.

Marine microplastics (MPs)-induced threats to shallow-water scleractinian corals are a growing global concern that needs interdisciplinary studies. However, it remains uncertain to what extent the ecotoxicological effects of MPs can explain the potential health impacts on corals at the species-specific scale. Using recent datasets of multiple MPs-induced impacts on coral species, we developed an integrated ecotoxicological modeling approach to quantify the MPs-corals interaction dynamics. Toxicokinetic (TK)-based corals ingestion, egestion, and adhesion processes posed by MPs were comprehensively evaluated. Based on estimated uptake and egestion rates, we showed that corals were much likely to bioaccumulate marine MPs. We applied toxicodynamic (TD) models to appraise time- and concentration-dependent response patterns across MPs-corals systems. We found that marine MPs are highly toxic to corals with a median benchmark concentration causing 10% compromised coral health of 20-40 mg L-1 and a mean growth inhibition rate of ~2% d-1. By providing these key quantitative metrics that may inform scientists to refine existing management strategies to better understand the long-term impact of MPs on coral reef ecosystems. Our TK/TD modeling scheme can help integrating current toxicological findings to encompass a more mechanistic-, ecological-, and process-based understanding of diverse coral ecosystems that are sensitive to MPs stressor varied considerably by species and taxonomic group.

Microplastic pollution of Calicut beach - Contributing factors and possible impacts.

Annual monitoring was carried out in the shoreline sediments of the Calicut beach, from 2016 to 2019 to understand the distribution and abundance of microplastics and its environmental implications. Further, the impact of the severe fluvial floods of Kerala during the August months of 2018 and 2019, on the microplastic pollution of the Calicut beach was also determined. Microplastic concentrations ranged between 80.56 items/kg of dry sand to 467.13 items/kg of dry sand during the sampling period. Polyethylene type was consistently higher in all the samples. There was a surge in microplastics concentration during both the floods with a higher proportion of low-retention-period microplastics. Among the different oceanographic parameters, it was found that significant wave height and surface wind speed are positively correlated to the number of the microplastics in Calicut beach.

Distribution and transport of microplastics in the upper 1150 m of the water column at the Eastern North Atlantic Subtropical Gyre, Canary Islands, Spain.

Nowadays it is widely known that pollution by microplastics (MP) at the open ocean covers immense areas. Buoyant plastics tend to accumulate in areas of convergence at the sea surface such as subtropical gyres, while non-buoyant plastics accumulate at the seafloor. However, previous studies have revealed that the total amount of plastic in the different oceans is not well correlated with the concentrations measured at the sea surface and the sea floor, evidencing a significant amount of missing plastic in the oceans. This deviation could be related to an underestimation of the role played by small fragments of plastic and fibers in the oceans. Furthermore, microplastic fragments with a density lower than the density of seawater have been gathered hundreds of meters below the sea surface in the Pacific Ocean due to their size and shape. The main objective of this study is to carry out, for the first time, an equivalent analysis along the water column for the Atlantic Ocean. In that sense, a total number of 51 samples were collected during four different oceanographic cruises between February and December 2019, from the sea surface down to 1150 m depth at the open ocean waters of the Canary Islands region (Spain). For each sample, 72 l of seawater were filtered on board with a mesh size of 100 µm, where the presence of microplastics has been clearly observed. Our results reveal the presence of microplastics at least up to 1150 m depth, at the Northeastern Atlantic Subtropical Gyre with noticeable seasonal differences. The spatial distribution of these small fragments and fibers at the water column is mainly related to the oceanic dynamics and mesoscale convective flows, overcoming the MP motion induced by their own buoyancy. Moreover, these microplastics have being transported by the ocean dynamics as passive drifters.

A roadmap for a Plastisphere.

The constantly growing production of synthetic materials and their presence in the environment gradually transform our Blue Planet into the Plastic One. Microplastics (MPs) enlarge significantly their surface during fragmentation processes. Undoubtedly, nanoplastics (NPs), emerging contaminants, and the Plastisphere, the total available surface of debris, are currently on the edge of science. Although a few research are dedicated to the analysis of MPs and NPs from the physical and chemical point of view, there is a lack of the correlation between the material characterization and the microbiological data. The ecological approach, covering the description of numerical antibiotic or metal resistance bacteria, dealing with toxicological issues or biodegradation, is of great importance. This paper creates the bridge between the material science approach and the eighth continent (as sometimes Plastisphere is called). It points out that the Plastisphere significance will grow within the coming years and it should not be regarded as one ecological niche, but a set of different ones. As the properties mainly depend on the surface morphology, its numerical characterization will be the base for the classification purposes to better describe and model this phenomenon. Apart from concerning the currently important issues of NPs and the Plastisphere, this paper presents the emerging area of research namely the numerical approach to their characterization. This proposal of an interdisciplinary approach to the classification of the Plastisphere's types might be interesting for the members of different scientific communities: nanotechnology, material science and engineering, chemistry, physics, ecology, microbiology, marine microplastics or picture analysis.

Raman Spectroscopy of Marine Microplastics - A short comprehensive compendium for the environmental scientists.

The aim of this paper is to present a short practical introduction to Raman spectroscopy for all non-specialist in chemistry and physics who are working with (marine) microplastics and nanoplastics. The continually growing polymer presence in the global ocean system constitutes a crucial interdisciplinary issue. To adequately address the problem of microplastics impact on the marine environment, its ecotoxicity, fate, sources, accumulation and weathering, one should characterise the debris found. In order to identify and describe the samples, spectroscopy techniques are crucial as they enable qualitative as well as quantitative analyses. This work provides the shortlist of good practices developed during own research, method potential and drawbacks, case studies as examples, simple explanation of primary polymer spectra. Finally, some matters on the edge and future directions are shortly mentioned. The selected proper results of measurements of diversified types of samples are provided to better illustrate the problem.

Recommended best practices for collecting, analyzing, and reporting microplastics in environmental media: Lessons learned from comprehensive monitoring of San Francisco Bay.

Microplastics are ubiquitous and persistent contaminants in the ocean and a pervasive and preventable threat to the health of marine ecosystems. Microplastics come in a wide variety of shapes, sizes, and plastic types, each with unique physical and chemical properties and toxicological impacts. Understanding the magnitude of the microplastic problem and determining the highest priorities for mitigation require accurate measures of microplastic occurrence in the environment and identification of likely sources. The field of microplastic pollution is in its infancy, and there are not yet widely accepted standards for sample collection, laboratory analyses, quality assurance/quality control (QA/QC), or reporting of microplastics in environmental samples. Based on a comprehensive assessment of microplastics in San Francisco Bay water, sediment, fish, bivalves, stormwater, and wastewater effluent, we developed recommended best practices for collecting, analyzing, and reporting microplastics in environmental media. We recommend factors to consider in microplastic study design, particularly in regard to site selection and sampling methods. We also highlight the need for standard QA/QC practices such as collection of field and laboratory blanks, use of methods beyond microscopy to identify particle composition, and standardized reporting practices, including suggested vocabulary for particle classification.

First report on the presence of small microplastics (≤ 3 µm) in tissue of the commercial fish Serranus scriba (Linnaeus. 1758) from Tunisian coasts and associated cellular alterations.

There is limited research on the ingestion of microplastic particles (MPs) by fish from the southern part of the Mediterranean Sea. This study provides the occurrence of small MPs (≤3 µm) in the gastrointestinal tract and muscle of adult benthopelagic fish Serranus scriba (L.1758), caught along Tunisian coasts. MPs were extracted from selected tissues using a potassium hydroxide digestion method (KOH 10%) and then quantified, and their chemical structure was characterized through Raman microspectroscopy. The results highlighted that MPs were present in all samples. The average abundance of MPs per gram of fish tissue identified through successive filters of 3 µm, 1.2 µm, and 0.45 µm differed significantly among the sites. The properties of the MPs extracted indicated that polyethylene-vinyl-acetate (PEVA: 33.45%), high density polyethylene (HD-PE: 17.33%), and fragments were the most abundant plastic types and shape found, respectively. Among those, most MPs were found at a size class of 3-1.2 µm (∼60%), especially in the muscle, suggesting a high transfer of MPs into the human diet. Our field work also aimed to explore the effects observed in the gastrointestinal tract with a battery of biomarkers assessing oxidative stress and neurotoxicity. The preliminary results of this study showed the existence of a link between small MPs, sites, and their associated urban activities and induced oxidative stress. However, more detailed studies are required to evaluate the transfer of MPs into tissues and the potential impacts of this transfer on human health.

Identification of marine microplastics in Eastern Harbor, Mediterranean Coast of Egypt, using differential scanning calorimetry.

Microplastic pollution has gained significant attention, and there are growing concerns about its potential effects on aquatic environments. The lack of proper solid waste management in Egypt has resulted in the accumulation of plastic litter and its deposition in waterways. However, no attempts have been made to identify or assess marine plastic litter in Egypt. We provide, for the first time, a precise, simple, and cost-effective method to identify microplastics in Eastern Harbor by using differential scanning calorimetry (DSC). This screening revealed the presence of ten polymers in seawater and shoreline sediments. Most of the extracted microplastics are secondary microplastics, as they appear to be remnants of larger plastic fragments.

Identification, origin and characteristics of bio-bead microplastics from beaches in western Europe.

Primary microplastics have been collected from 17 beaches along the Atlantic, English Channel and southern North Sea coasts of western Europe. Based on visual characteristics, these plastics were differentiated as either relatively smooth, lentil- or disc-shaped pre-production pellets (or nurdles), which were usually a few mm in diameter and were mainly white to off-white, or rougher and more irregular pellets that were slightly larger and usually black. The latter appeared to be bio-beads, or plastics that are specifically manufactured for use as biomedia in certain sewage water treatment (SWT) plants and, possibly, in other industrial wastewater treatment applications. Identification of bio-beads was confirmed following the acquisition of identical samples from a SWT plant in southwest England and a French supplier of bio-beads. Infrared and x-ray fluorescence analysis revealed that bio-beads have, at least historically, been constructed of plasticised polyethylene and, unlike pre-production pellets, contained variable quantities of potentially toxic elements: Br, Cd, Cr, Hg, Pb and Sb; with a distinctive Br to Sb ratio indicative of brominated flame retardants and antimony-based retardant synergists. It is asserted that bio-beads have been manufactured from a heterogeneous mix of recycled polyethylene and end-of-life electrical and electronic plastic, with concentrations of Br, Cd, Cr or Pb in about 50 bio-beads (out of 497 analysed) non-compliant or potentially non-compliant with respect to current regulations on hazardous plastic waste. Concentrations of Br, Cd, Cr, Pb and Sb extracted from individual bio-beads by a simulated avian digestive fluid were variable, with maximum values of about 14, 0.8, 1.3, 20 and 1.4 µg g-1, respectively. The presence and, in many cases, dominance of bio-beads among beached primary microplastics is discussed with regard to the classification of microplastics and potential impacts on wildlife.

Smells good enough to eat: Dimethyl sulfide (DMS) enhances copepod ingestion of microplastics.

Marine copepods have been shown to readily ingest microplastics - a crucial first step in the transfer of plastics into the marine food chain. Copepods have also been shown to elicit a foraging behavioural response to the presence of olfactory stimuli, such as dimethyl sulfide (DMS) - a volatile compound produced by their algal prey. Here, we show that the temperate Calanoid copepod Calanus helgolandicus displays enhanced grazing rates of between 0.7 and 3-fold (72%-292%) on microplastics that have been infused in a DMS solution, compared to DMS-free controls. Environmental exposure of microplastics may result in the development of an olfactory signature that includes algal-derived compounds such as DMS. Our study provides evidence that copepods, which are known to use chemosensory mechanisms to identify and locate dense sources of palatable prey, may be at an increased risk of plastic ingestion if it mimics the scent of their prey.

Characterization of microplastic litter from oceans by an innovative approach based on hyperspectral imaging.

An innovative approach, based on HyperSpectral Imaging (HSI), was developed in order to set up an efficient method to analyze marine microplastic litter. HSI was applied to samples collected by surface-trawling plankton nets from several parts of the world (i.e. Arctic, Mediterranean, South Atlantic and North Pacific). Reliable information on abundance, size, shape and polymer type for the whole ensemble of plastic particles in each sample was retrieved from single hyperspectral images. The simultaneous characterization of the polymeric composition of the plastic debris represents an important analytical advantage considering that this information, and even the validation of the plastic nature of the small debris, is a common flaw in the analysis of marine microplastic pollution. HSI was revealed as a rapid, non-invasive, non-destructive and reliable technology for the characterization of the microplastic waste, opening a promising way for improving the plastic pollution monitoring.