RESUMEN
Microplastic (MP) contamination in the aquatic environment is a cause of concern worldwide since MP can be taken up by different organisms, altering different biological functions. In particular, evidence is accumulating that MP can affect the relationship between the host and its associated microbial communities (the microbiome), with potentially negative health consequences. Synthetic microfibers (MFs) represent one of the main MPs in the marine environment, which can be accumulated by filter-feeding invertebrates, such as bivalves, with consequent negative effects and transfer through the food chain. In the mussel Mytilus galloprovincialis, polyethylene terephthalate (PET) MFs, with a size distribution resembling that of an MF released from textile washing, have been previously shown to induce multiple stress responses. In this work, in the same experimental conditions, the effects of exposure to PET-MF (96 h, 10, and 100 µg/L) on mussel hemolymph microbiome were evaluated by 16S rRNA gene amplification and sequencing. The results show that PET-MF affects the composition of bacterial communities at the phylum, family and genus level, with stronger effects at the lowest concentration tested. The relationship between MF-induced changes in hemolymph microbial communities and responses observed at the whole organism level are discussed.
Asunto(s)
Hemolinfa , Microbiota , Mytilus , ARN Ribosómico 16S , Animales , Mytilus/microbiología , Hemolinfa/metabolismo , Hemolinfa/microbiología , ARN Ribosómico 16S/genética , Poliésteres , Contaminantes Químicos del Agua/toxicidad , Microplásticos/toxicidad , Tereftalatos Polietilenos , Bacterias/clasificación , Bacterias/genéticaRESUMEN
This research aims to explore how functionally active structures affect the physical, mechanical, thermal, and fire-resistant properties of elastomeric compositions using ethylene-propylene-diene rubber as a base. The inclusion of aluminosilicate microspheres, microfibers, and a phosphorus-boron-nitrogen-organic modifier in these structures creates a synergistic effect, enhancing the material's heat-insulating properties by strengthening coke and carbonization processes. This results in a 12-19% increase in heating time for unheated sample surfaces and a 6-17% increase in residual coke compared to existing analogs. Microspheres help counteract the negative impact of microfibers on composition density and thermal conductivity, while the phosphorus-boron-containing modifier allows for controlling the formation of the coke layer.
RESUMEN
Microplastics (MP; 1 µm-5 mm) and microfibers (MF; thin, elongated particles with a high-length-to-width ratio) have become a major global environmental issue due to their ubiquity in the oceans and possess complex physicochemical properties that vary their mobility, bioavailability, and toxicity toward organisms and interactions with their surrounding pollutants. Nonetheless, a reliable methodology that would facilitate and automate the monitoring of MP is still lacking. Intending to select practical and standardized methods and considering the challenges in MPs detection, a new analysis protocol based on optical microscopy for the counting and morphological analysis of the particles has been developed. This method overcomes some issues related to the lack of practicality and standardization of the others currently applied, and does not involve sieving, washing, heating, or density separation and digestion processes. Our method is green and requires a minimum quantity of sediment, i.e., 1.5 g, and shortened timeframes. Future research efforts may need to develop and implement new analytical tools and combinations of technologies to complement respective detection limitations and yield reliable characterization of both MFs and MPs. We tested our protocol to study, for the first time, both marine and land sediment in the Vesuvian area of the Gulf of Naples (Italy).
RESUMEN
Chemical and microlitter (ML) pollution in three Estonian coastal areas (Baltic Sea) was investigated using mussels (Mytilus trossulus). Polycyclic aromatic hydrocarbons (PAH) in mussel tissues were observed in moderate levels with high bioaccumulation factors for the more hydrophilic and low molecular weight PAH (LMW PAH), namely anthracene and fluorene. Tissue concentrations of polybrominated diphenyl ethers (PBDE) and cadmium within mussel populations exceeded the Good Environmental Status thresholds by more than 200% and 60%, respectively. Multiple contamination at the Muuga Harbour site by tributyltin, high molecular weight PAH, including the highly toxic benzo[c]fluorene and PBDE, coincided with the inhibition of acetylcholinesterase activity and a lower condition index of the mussels. The metabolization and removal of bioaccumulated LMW PAH, reflected in the dominance of oxy-PAH such as anthracene-9,10-dione, is likely associated with the increased activity of glutathione S-transferase in caged mussels. Only a few microplastic particles were observed among the ML in mussel tissues, with coloured cellulose-based microfibers being the most prevalent. The average concentration of ML in mussels was significantly higher at the harbour area than at other sites. The integrated biomarker response index values allowed for the differentiation of pollution levels across studied locations representing high, intermediate, and low pollution levels within the studied area.
Asunto(s)
Monitoreo del Ambiente , Éteres Difenilos Halogenados , Mytilus , Hidrocarburos Policíclicos Aromáticos , Contaminantes Químicos del Agua , Animales , Mytilus/efectos de los fármacos , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/análisis , Hidrocarburos Policíclicos Aromáticos/análisis , Hidrocarburos Policíclicos Aromáticos/toxicidad , Monitoreo del Ambiente/métodos , Éteres Difenilos Halogenados/toxicidad , Finlandia , Fluorenos/toxicidad , AntracenosRESUMEN
The occurrence of natural/artificial and synthetic microfibers was assessed in three commercial fish species (Engraulis encrasicolus, Mullus barbatus, Merluccius merluccius) from the Tyrrhenian Sea sold for human consumption. The gastrointestinal tracts of n. 150 samples were analyzed, the isolated microfibers were classified applying a morphological approach, based on the analysis of their morphological features, coupled with the identification of the chemical composition of a subsample of microfibers. All the species contained microfibers at levels ranging from 0 to 49 items/individual and the number of ingested microfibers significantly differed between pelagic and demersal fishes. The evaluation of fiber morphologies highlighted that natural/artificial microfibers were the most numerous among the isolated microfibers, while the dominant colors were blue, black, and clear in all the species. Chemical characterization confirmed the morphological identification and indicated cellulose and polyester as the most common polymer types. Considering the analytical issues that may affect the evaluation of microfiber pollution, the results pointed out the importance of an accurate morphological approach that allows the distinction between different fiber types, before the spectroscopic analyses. Moreover, the implementation of fast and accessible methods to identify microfibers in fish species intended for human consumption will be beneficial also to make an adequate risk assessment to consumer health.
RESUMEN
Microplastics, MPs, plastic fragments with a dimension lower than 5 mm, and microfibers, MFs, synthetic and natural/artificial fibrous fragments with a diameter lower than 50 µm, are ubiquitous pollutants identified in different environmental compartments. In this work the occurrence of MPs and MFs on honeybees, Apis mellifera, and beehive products was evaluated, using Fourier transform infrared microspectroscopy, confirming that MPs and MFs are widely present as air contaminants in all the apiary's areas (high and low urbanized areas) in Southern Italy. Results indicated that independently from the site, both honeybees and honey samples, are contaminated by MFs with non-natural color. The majority of MFs were of natural origin followed by artificial MFs and synthetic MFs. Moreover, the chemical composition of MFs isolated from honeybees reflect that used in synthetic fabrics, leading to the hypothesis that they are released from textile to air where are captured by bees. Results highlight that MFs represent a class of ubiquitous airborne anthropogenic pollutants. The identification of polytetrafluoroethylene, PTFE, MPs in honeybees confirm the recent findings that PTFE MPs are diffuse soil and air contaminants while the identification of polyethylene, PE, based MPs in honey samples, from low density urban sites, could be correlated to the large use of PE in agriculture. In the honey samples, also polycaprolactone, PCL, MPs were identified, mainly in high density urban sites, confirming that biodegradable materials could be further pollutants in the environments. The results indicate that honeybees are contaminated by MPs and MFs during their flights or picking up from the hive components, flowers, from other nest mates, from the clothes of the beekeeper, among others and some of them could be transferred to honey samples that could be also affected by soil contamination.
Asunto(s)
Monitoreo del Ambiente , Miel , Microplásticos , Abejas , Animales , Italia , Microplásticos/análisis , Miel/análisis , Cadena Alimentaria , Agricultura , Contaminantes Atmosféricos/análisis , TextilesRESUMEN
In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.
Asunto(s)
Biomasa , Corteza de la Planta , Corteza de la Planta/química , Disolventes Eutécticos Profundos/química , Celulosa/química , Geles/química , Difracción de Rayos X , Solventes/químicaRESUMEN
Mixed solutions of PAN with cellulose in N-methylmorpholine-N-oxide (NMMO) were prepared. Systems with a fraction of a dispersed phase of a cellulose solution in NMMO up to 40% are characterized by the formation of fibrillar morphology. The fibrils created as the mixed solution is forced through the capillary take on a more regular order as the cellulose content in the system drops. The systems' morphology is considered to range from a heterogeneous two-phase solution to regular fibrils. The generated morphology, in which the cellulose fibrils are encircled by the PAN, can be fixed by spinning fibers. Cellulose fibrils have a diameter of no more than a few microns. The length of the fibrils is limited by the size of the fiber being formed. The process of selectively removing PAN was used to isolate the cellulose microfibrils. Several techniques were used to evaluate the mechanical properties of isolated cellulose microfibers. Atomic force microscopy allowed for the evaluation of the fiber stiffness and the creation of topographic maps of the fibers. Cellulose microfibers have a higher Young's modulus (more than 30 GPa) than cellulose fibers formed in a comparable method, which affects the mechanical properties of composite fibers.
RESUMEN
In this work, porous polyimide microfibers (PI-µF) were prepared by high-pressure wet spinning method, and successfully applied as adsorbents for solid phase extraction (SPE) of fluoroquinolones (FQs) in water and food samples. The PI-µFs of â¼10, 25, 50, 100 µm in diameter could be controlled by the inner diameter of quartz capillary nozzles. The flow resistance of SPE cartridges packed with 10 µm PI microfiber (10-PI-µF) and 25-PI-µF was comparable to or even lower than that of commercial SPE cartridges, while the flow resistance of 50-PI-µF and 100-PI-µF SPE cartridges was increased obviously due to tiny broken pieces. The 10-PI-µF and 25-PI-µF have a specific surface area of 102 m2 g-1 and 76 m2 g-1, mesopores of 22-32 nm, and large breakthrough volume of 110 mL/5 mg and 85 mL/5 mg for FQs, while the 50-PI-µF and 100-PI-µF had much lower specific surface area and hardly had retention for FQs. FQs from tap water, egg and milk samples were then extracted by PI-µF SPE, and analyzed by high performance liquid chromatography-fluorescence detector (HPLC-FLD). SPE parameters as type of elution solvent, elution solvent volume, pH value of sample solution, flow rate of sample solution, and breakthrough volume were first optimized in detail. Under the optimal conditions, the PI-µF SPE/HPLC-FLD method showed high recoveries (96.8%-107%), wide linearity (0.05-50 µg L-1, or 0.01-10 µg L-1), high determination coefficients (R2 ≥0.9992), and low limits of detection (LODs, 0.005-0.014 µg L-1). For the real tap water, egg and milk samples, the recoveries and RSDs were 81-119% and 0.8-9.8%, respectively. The results show that porous microfiber up to 25 µm in diameter is a promising solid-phase extraction adsorbent with the lowest flow resistance that can be used for trace organic pollutants in water and food samples.
Asunto(s)
Fluoroquinolonas , Límite de Detección , Leche , Extracción en Fase Sólida , Contaminantes Químicos del Agua , Extracción en Fase Sólida/métodos , Fluoroquinolonas/análisis , Fluoroquinolonas/aislamiento & purificación , Fluoroquinolonas/química , Porosidad , Leche/química , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/aislamiento & purificación , Contaminantes Químicos del Agua/química , Cromatografía Líquida de Alta Presión/métodos , Animales , Huevos/análisis , Adsorción , Presión , Contaminación de Alimentos/análisis , Resinas Sintéticas/química , Análisis de los Alimentos/métodos , Reproducibilidad de los ResultadosRESUMEN
Textile materials are one of the primary sources of microplastic pollution. The washing procedure is by far the most significant way that textile products release microplastic fibers (MPFs). Therefore, in this study, the effects of various textile raw materials (A acrylic, PA polyamide, PET polyester, RPET recycled polyester and PP polypropylene), fabric construction properties (woven, knitted), thickness and basis weight values on MPFs release at different washing stages (pre-washing, soaping/rinsing) were examined separately. To mimic the most popular home washing procedures, a 10-minute pre-wash and a 35-minute soaping/rinsing phase at 40°C were selected for the washing procedure. Utilizing the Image J program on macroscopic images captured by a high-resolution SL.R camera, the microfibers collected by filtering the water have been visually counted. According to the results, knitted fabrics released fewer MPFs than woven fabrics, with the woven acrylic sample (A3-w) exhibiting the highest release (2405 MPFs). The number of MPFs increased along with the thickness and weight of the fabric. Recycled polyester was found to release more MPFs than virgin polyester under the same conditions (1193 MPFs vs. 908 MPFs). This study demonstrates how recycled polyester, although initially an environmentally beneficial solution, can eventually become detrimental to the environment. Furthermore, it is known that the pre-washing procedure-which is optional-releases a lot more MPFs than the soaping and rinsing procedures, and that stopping this procedure will drastically lower the amount of MPFs incorporated into the water.
RESUMEN
Projected increases in temperature and decreases in salinity associated with global climate change will likely have detrimental impacts on eastern oyster, Crassostrea virginica, as these variables can influence physiological processes in these keystone species. We set out to determine how the interactive effects of temperature (20 °C or 27 °C) and/or salinity (27 or 17) impacted the energetic reserves, aerobic and anaerobic metabolism, and changes to oxidative stress or total antioxidant potential as a consequence of an altered environment over a 21-day exposure. Gill and adductor muscle were used to quantify changes in total glycogen and lipid content, Electron Transport System and Citrate Synthase activities, Malate Dehydrogenase activity, Protein Carbonyl formation, lipid peroxidation, and total antioxidant potential. A second exposure was performed to determine if these environmental factors influenced the ingestion of microfibers, which are now one of the leading forms of marine debris. Elevated temperature and the combination of elevated temperature and decreased salinity led to an overall decline in oyster mass, which was exacerbated by the presence of microfibers. Changes in metabolism and oxidative stress were largely influenced by time, but exposure to elevated temperature, decreased salinity, the combination of these stressors or exposure to microfibers had small impacts on oyster physiology and survival. Overall these studies demonstrate that oyster are fairly resilient to changes in salinity in short-term exposures, and elevations in temperature or temperature combined with salinity result in changes to the oyster energetic response, which can be further impacted by the presence of microfibers.
RESUMEN
Cell properties generally change when the culture condition is changed. However, mesenchymal stem cells cultured on a hard material surface maintain their differentiation characteristics even after being cultured on a soft material surface. This phenomenon suggests the possibility of a cell culture material to memorize stem cell function even in changing cell culture conditions. However, there are no reports about cell memory function in three-dimensional (3D) culture. In this study, colon cancer cells were cultured with collagen microfibers (CMF) in 3D to evaluate their resistance to reactive oxygen species (ROS) in comparison with a monolayer (2D) culture condition and to understand the effect of 3D-culture on cell memory function. The ratio of ROS-negative cancer cells in 3D culture increased with increasing amounts of CMF and the highest amount of CMF was revealed to be 35-fold higher than that of the 2D condition. The ROS-negative cells ratio was maintained for 7 days after re-seeding in a 2D culture condition, suggesting a 3D-memory function of ROS resistance. The findings of this study will open up new opportunities for 3D culture to induce cell memory function.
RESUMEN
The study aimed to evaluate cigarette butt filters (CBFs) as a potential source of dissolved organic carbon (DOC) in water leading to the formation of disinfection by-products. Two different forms of CBFs - intact (I) and disintegrated (D), as they occur in the environment, were selected for leaching in chlorinated (CI, CD), non-chlorinated (NI, ND), and highly chlorinated (HCD) water samples. The UV absorbance profiles of the leachate samples showed that intact CBFs exhibited higher DOC leaching compared to the disintegrated ones, which was further accentuated in chlorinated samples (CI > CD > NI > ND). The Fourier Transform Infrared spectra of the leachates revealed the presence of characteristic functional groups of cellulose acetate and its chlorinated derivatives, indicating the potential degradation of the polymer. Moreover, trihalomethane (THM) formation in chlorinated samples was relatively higher in CI samples (2 - 11.5 times) compared to CD, consistent with the DOC leaching trends. Further, the speciation characteristics of different THMs in both CI and CD samples were similar. Although spectral and morphological analyzes of CI and CD samples revealed negligible variation, HCD samples depicted significant surface roughness characterized by the formation of pits and holes, along with the evolution of crystallinity. This suggested accelerated degradation of CBFs and disruption of acetyl groups as a factor of elevated chlorine concentrations.
RESUMEN
Wastewater treatment plants play a crucial role in controlling the transport of pollutants to the environment and often discharge persistent contaminants such as synthetic microplastic fibers (MFs) to the ecosystem. In this study, we examined the fate and toxicity of polyethylene terephthalate (PET) MFs fabricated from commercial cloth in post-disinfection secondary effluents by employing conditions that closely mimic disinfection processes applied in wastewater treatment plants. Challenging conventional assumptions, this study illustrated that oxidative treatment by chlorination and ozonation incurred no significant modification to the surface morphology of the MFs. Additionally, experimental results demonstrated that both pristine and oxidized MFs have minimal adsorption potential towards contaminants of emerging concern in both effluents and alkaline water. The limited adsorption was attributed to the inert nature of MFs and low surface area to volume ratio. Slight adsorption was observed for sotalol, sulfamethoxazole, and thiabendazole in alkaline water, where the governing adsorption interactions were suggested to be hydrogen bonding and electrostatic forces. Acute exposure experiments on human cells revealed no immediate toxicity; however, the chronic and long-term consequences of the exposure should be further investigated. Overall, despite the concern associated with MFs pollution, this work demonstrates the overall indifference of MFs in WWTP (i.e., minor effects of disinfection on MFs surface properties and limited adsorption potential toward a mix of trace organic pollutants), which does not change their acute toxicity toward living forms.
Asunto(s)
Microplásticos , Aguas Residuales , Contaminantes Químicos del Agua , Microplásticos/toxicidad , Microplásticos/química , Adsorción , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/química , Aguas Residuales/química , Desinfección , Humanos , Eliminación de Residuos Líquidos/métodos , Tereftalatos Polietilenos/química , Tereftalatos Polietilenos/toxicidadRESUMEN
Nowadays, electrospun fibrous mats are used as drug delivery systems for loading of potential drugs in order to kill cancer cells. In the study, a skin patch for treating melanoma cancer after surgery was made using polycaprolactone and polymetformin microfibers that were loaded with doxycycline (PolyMet/PCL@DOX), an anti-cancer stem cell agent. The morphology, structure, mechanical characteristics, swelling, and porosity of the electrospun microfibers were examined. Drug release andanticancereffectiveness of PolyMet/PCL@DOXwas evaluated against A375 melanoma cancer stem cells using the MTS, Flow cytometry, colony formation and CD44 expression assays. Scanning electron microscopy (SEM) verified the micro fibrous structure with a diameter of about 2.31 µm. The porosity and swelling percentages for microfibers was 73.5 % and 2.9 %, respectively. The tensile strength at the breaking point was equal to 3.84 MPa. The IC50 of PolyMet/PCL@DOX was 7.4 µg/mL. The survival rate of A375 cells after 72 h of PolyMet/PCL@DOX treatment was 43.9 %. The colony formation capacity of A375 cells decreased after PolyMet/PCL@DOX treatment. The level of CD44 expression in the PolyMet/PCL@DOX group decreased compared to the control group. Generally, PolyMet/PCL@DOX microfibers can be a promising candidate as a patch after surgery to eradicate cancer stem cells, effectively.
Asunto(s)
Doxiciclina , Liberación de Fármacos , Melanoma , Células Madre Neoplásicas , Poliésteres , Doxiciclina/administración & dosificación , Doxiciclina/farmacología , Doxiciclina/química , Poliésteres/química , Humanos , Melanoma/tratamiento farmacológico , Melanoma/patología , Células Madre Neoplásicas/efectos de los fármacos , Línea Celular Tumoral , Metformina/farmacología , Metformina/administración & dosificación , Metformina/química , Supervivencia Celular/efectos de los fármacos , Receptores de Hialuranos/metabolismo , Porosidad , Sistemas de Liberación de Medicamentos/métodos , Portadores de Fármacos/química , Antineoplásicos/administración & dosificación , Antineoplásicos/farmacología , Antineoplásicos/químicaRESUMEN
Research into new composites utilizing cubic boron nitride (PcBN) shows promise for enhancing cutting tool performance. The unique properties of these materials stem from the addition of microfibers made of refractory compounds to their structure. This study looks at developing two-layer composites based on cBN group BL, reinforced with SiCw and Al2O3w microfibers. The goal is to improve tool stability when cutting hardened steels with impact loads. PcBN composite samples were made by sintering a mixture of cBN powder with bundles and microfibers under 7.7 GPa pressure. Bond material selection was based on analyzing the relationship between Poisson's ratio (η) and plasticity parameter (G/B). The density, Young's modulus, Poisson's ratio, and hardness of the composites were determined, and the microstructure of samples with TiCN bond was studied. Tool-life tests were conducted on two-layer cutting inserts made of PcBN reinforced with SiCw and Al2O3w microfibers during the machining of hardened KhVG steel (HRC 55) under impact loads at cutting speeds of 100 and 200 m/min.
RESUMEN
The increased demand and consumption of synthetic textiles have contributed to microplastic pollution in the form of microfibers. These particles are widely spread in the aquatic environment, leading to the exposure of marine biota, including edible species. The current study aimed to assess the extent of microfiber contamination in a commercially relevant fish species, Merluccius merluccius, which is considered a small-scale bioindicator for the monitoring of plastic ingestion in the Mediterranean coastal environment. The frequency of ingestion, abundance, and composition of textile microfibers isolated from the fish gut were characterized. Results showed the occurrence of microfibers in 75% of the samples, with a mean number of 10.6 microfibers/individual, of which 70% were classified as natural microfibers. The spectroscopic analyses confirmed both the visual identification of microfibers and the prevalence of cellulosic fibers. The obtained findings provided evidence of both natural/artificial and synthetic microfiber exposure in an important commercial fish species that, considering the consumption of small individuals without being eviscerated, may be a potential route of microfiber exposure in humans. Monitoring programs for fishery products from markets are needed to assess contamination levels and human health risks. In addition, measures to control microfiber pollution need to occur at multiple levels, from textile industries to international governments.
RESUMEN
Electrospun microfibers, designed to emulate the extracellular matrix (ECM), play a crucial role in regulating the cellular microenvironment for tissue repair. Understanding their mechanical influence and inherent biological interactions at the ECM interface, however, remains a complex challenge. This study delves into the role of mechanical cues in tissue repair by fabricating Col/PLCL microfibers with varying chemical compositions and alignments that mimic the structure of the ECM. Furthermore, we optimized these microfibers to create the Col/PLCL@PDO aligned suture, with a specific emphasis on mechanical tension in tissue repair. The result reveals that within fibers of identical chemical composition, fibroblast proliferation is more pronounced in aligned fibers than in unaligned ones. Moreover, cells on aligned fibers exhibit an increased aspect ratio. In vivo experiments demonstrated that as the tension increased to a certain level, cell proliferation augmented, cells assumed more elongated morphologies with distinct protrusions, and there was an elevated secretion of collagen III and tension suture, facilitating soft tissue repair. This research illuminates the structural and mechanical dynamics of electrospun fiber scaffolds; it will provide crucial insights for the advancement of precise and controllable tissue engineering materials.
Asunto(s)
Materiales Biomiméticos , Proliferación Celular , Suturas , Ingeniería de Tejidos , Andamios del Tejido , Animales , Proliferación Celular/efectos de los fármacos , Materiales Biomiméticos/química , Andamios del Tejido/química , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Ratones , Fibroblastos/metabolismo , Fibroblastos/citología , Poliésteres/química , Estrés MecánicoRESUMEN
Marine microplastics, categorized as primary and secondary, including synthetic microfibers like polyethylene terephthalate (PET), polypropylene (PP) and acrylic (PC), represent a potential environmental concern. The complex classification of these fibers, originating from diverse sources such as textiles and many others commercial goods, prompts a need for understanding their impact on aquatic organisms. This study assesses the ecological risks associated with both natural and synthetic fibers in aquatic ecosystems, focusing on toxicity data and their effects on taxonomic groups like Mollusca, Arthropoda, Echinodermata, Cnidaria, and Chordata. To carry out species sensitivity distribution (SSD) curves, a comprehensive analysis of scientific literature was conducted, collecting toxicity data related to various fibers. The resulting SSDs provide insights into the relative sensitivity of different taxonomic groups. The potential ecological risks were evaluated by comparing measured concentrations in diverse aquatic environments with Predicted No-Effect Concentration (PNEC) values. The calculation of Risk Quotient (RQ) allowed to indicate areas where fibers abundance poses a potential threat to aquatic organisms. The study reveals that nylon fibers can pose the highest toxicity risk, especially in Atlantic and Pacific Ocean, Arabian Gulf and VietNam river. Mollusca emerged as particularly sensitive to different fiber types, likely due to their body structure facilitating the accumulation of microfibers. The research emphasizes the urgent need for further studies to get data to human health risk analysis and to address comprehensive environmental management strategies to address the global issue of microfiber pollution.